alert to use criticism to host swap

Similar Questions

• Messaging Instant Lync can be used with the Hosted Exchange mail server?

  Messaging Instant Lync can be used with the Hosted Exchange mail server? Let me rephrase the question. As everyone knows already Lync messenger is used with Office 365, but can be used with the same way hosted exchange server, it is used with Office 365?

  You will find support for MS Lync in these forums-online http://social.technet.microsoft.com/Forums/en-us/category/ocs

• Using the guest host as operating system operating system

  When using VMware Server, if you install it on Server 2003, can use you your host operating system in your guest OS.  Or would you have to install another copy of it?

  Just trying to make sure I have good understanding.  If I install XP as a guest operating system, which is accessible remotely.  In addition, the same image can be created again and again or should I create a new serial numbers don't?  I'm fine with the purchase of new numbers of seria, but did not know how to create the guest operating system has worked.

  Consider each virtual machine comments as another computer.  So, everyone needs an operating system installed.  You can install the same host operating system, but it is a different facility.

  Microsoft allows you to use product keys Windows 4 ~ 5 times and then they will not activate them.  So if you remove an active Windows VM, that use of the key is lost.

  You may be able to copy a virtual machine already activated without having to re - activate, I'm not sure.  Like to do a clean install of Windows XP, activate and update, then copies of the virtual machine before you install additional software.

• SanHQ 3.1 - alert space use review

  Just upgraded to 3.1 from 3.0.x. A thin provisioned volume that is less than 80% full keeps generating an alert that the volume is more than 99% complete:

  4.2 critical 03:21 12/01/2016 8 hr 31 critical Mr. Active: 99,64% use space on volume: VMDatastore

  The installation program is attached to the image. Anyone know why this alert is raised? PS4100 on the latest firmware.

  

  Known bug and problem good luck seeing a fix, has been around for awhile that's why I rolled back to a previous version of SANHQ

• Help create messages Syslog uses the router host name

  We currently have an IP SLA related to the EEM scripts that work great to send syslog messages to alert purposes.  However, I would like for each router that sends a syslog to send its host name using wildcards instead of the specified host name.  I'm guessing some sort of filtering would do the trick, but I can't find any good documentation on this topic.  That's what I currently have:

  ALS IP 1
  echo ICMP - 172.24.50.1 source-interface GigabitEthernet2
  threshold 250
  timeout of 1000
  frequency 5
  IP SLA annex 1 point of life to always start-time now

  !

  LAN_interface_Link_down event manager applet
  syslog "Interface GigabitEthernet2, state change downstairs" event model
  order cli action 1 'enable '.
  Action 2 syslog priority to information msg "command, LAN_interface_Link_down is running on C1-GrandView-PA-CSR1000-Recover... »
  3 wait 5 action
  Action4 cli command "configures terminal.
  action 5 'interface range t3 - 4 cli command.
  action 6 'closed' cli command
  Action 7 cli command 'end '.
  LAN_interface_Link_up event manager applet
  syslog event model "Interface GigabitEthernet2, altered state until.
  order cli action 1 'enable '.
  action 2 cli command "configures terminal.
  action 3 'interface range t3 - 4 cli command.
  Action4 "not shut" cli command
  Action 5 cli command 'end '.
  6 wait 15 action
  Action 7 syslog priority to information msg "command, LAN_interface_Link_up is running on C1-GrandView-PA-CSR1000-Recover... »
  Next_Hop_LAN_Unreachable event manager applet
  event track 10 low maxrun 40
  order cli action 1 'enable '.
  Action 2 syslog priority to information msg "command, Next_Hop_LAN_Unreachable is running on C1-GrandView-PA-CSR1000-Recover... »
  3 wait 5 action
  Action4 cli command "configures terminal.
  action 5 'interface range t3 - 4 cli command.
  action 6 'closed' cli command
  Action 7 cli command 'end '.
  Next_Hop_LAN_Reachable event manager applet
  event track 10 status place maxrun 40
  order cli action 1 'enable '.
  action 2 cli command "configures terminal.
  action 3 'interface range t3 - 4 cli command.
  Action4 "not shut" cli command
  Action 5 cli command 'end '.
  6 wait 15 action
  Action 7 syslog priority to information msg "command, Next_Hop_LAN_Reachable is running on C1-GrandView-PA-CSR1000-Recover... »

  You can use the action of information to gather the hostname:

  routername type info action 1.0

  message from syslog to action 2.0 "my name is $_info_routername.

• Firefox uses the windows HOSTS file?

  When you use Microsoft Internet Explorer, the HOSTS file is used to block unwanted sites to load. Firefox checks this file before loading these sites?

  Yes, I use the hosts file and it works with Internet Explorer and Firefox.

• Error when you try to use the webcam: host process Windows stopped working-RUNDLL32

  RUNDLL32

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  Whenever I use the webcam on my computer, he brings a message as follows:

  WINDOWS HOST PROCESS (RUNDLL32) HAS STOPPED WORKING

  I can still use webcam with no problems, but I have to cancel and close this message

  What is this error, why this is and how can I solve this problem

  I read this from an old thread in this forum.
  Here is the suggested solution...
  Disable the webcam.
  Start button > Control Panel > Classic view > Folder Options > view > first entry,check "always show icons never thumbnails" > OK.

  Open your Webcam again. The message is passed now?
  If so, turn off the webcam.
  Back to Folder Options > uncheck the first entry "always show icons never thumbnails".

  Open the webcam again. The message comes back?
  If not, problem solved.

  Source:
  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/46d915fb-E470-41c6-A4de-dc56d05e258f

  t-4-2

• How to change the title for the alert box using javascript in Blackberry Z10?

  Hi all

  I developed 10 Blackberry webworks using the emulator to ripple and Blackberry Webworks SDK 1.0.4.11.In I use box alert and drop-down list in Javascript... When you use those Blackberry Z10... It displays the title for the alert "JavaScript Confirm" box and the "Select"dropdown list... So I want to change the title for these controls. Please me... Thanks in advance...

  Kind regards

  Marimuthu_P

  Alerts are native OS controls and you can not change the titles.

  You can use the WebWorks dialog API to create custom if dialog boxes:
  https://developer.BlackBerry.com/HTML5/APIs/beta/BlackBerry.UI.dialog.html

• Number max of virtual machines using vGPU by host

  What is the maximum number of virtual machines per host that can use a vGPU? Unfortunately the "Maximum of Configuration" doc for vSphere does not include this piece of information.

  -> I understand that this also depends on the number of NETWORK adapters you can fit into a server. So I'm just interested to understand if there is no limitation of vSphere.

  Thank you!

  The maximum number of vGPU VMs depends largely on the server platform and the number of physical GPU.  Many servers are supported GPU two PCIe x 16. vSphere 6.0 supports maximum 16 physical GPU (e.g. Four GRID K1) but not many servers support this configuration now... Most vGPU VMs we tested on a single system is 96 through three GRID K1 GPU physics with profile K120Q.

• use of the host disk

  I have vm windows server 2003 reports 35gigs used, but on my host the vmdk's almost 52gigs!

  How can I fix this?  I use workstation 8.0.4

  Welcome to the community,

  a hard file will grow automatically size provisioned with data that you copy in it, but not automatically shrink. For how to do this take a look at http://kb.vmware.com/kb/2019649.

  André

• How to use cmd in host();

  Hello

  I use oracle forms and reports 10g.     10.2.0.1

  Please give me example how to execute this order forms form using PL/SQL oracle built in HOST();

  java-jar "D:\JAVAPROJ\PROJECT\dist\FILE.jar."

  It works very well with CMD directly, but when I use the host (' cmd/c run java-jar "D:\SMS\SMS\dist\SMS.jar" ');

  It gives me error.

  example please...

  Thank you

  Hello

  Try this

  Start

  HOST (was: \JAVAPROJ\PROJECT\dist\FILE.jar');

  end;

• Someone knows how to solve problems using webfonts self-hosted in Muse for iMac?

  I try to use once downloaded and self-hosted in Muse that I purchased from MyFonts.com as a kit times. I have all necessary formats required for use with Muse.

  Unable to install the .ttf files by double-clicking top (by following the instructions in the Muse tutorials) I put manually the .ttf files in the user > library > fonts folder on my hard drive.

  But when I add the webfonts in Muse, most fonts can not find system fonts match and therefore does not work properly. Can't understand why some files work and some don't because they are part of the same font and all located in the system folder.

  Is there a reason why this is happening?

  Thank you

  Hi Chris,

  As mentioned in the tutorial that akshay linked above, you need the version of the system font (i.e., police office) of the police as well. The .ttf that comes with the kit of web fonts is often (but not always) protected and not installable as a system font.

  Abhishek

• Create a virtual machine using the ubuntu (host of W7) partition

  I am running Windows 7 and 8 of VMware Workstation.

  The disc is actually a raid-0. There are 3 partitions: (Dual-boot)

  -Ubuntu (64-bit)

  -System reserved Windows

  -Windows (64-bit)

  I am trying to create a virtual machine under W7 using the Ubuntu partition.

  I tried 2 things for step 'select a physical drive:

  -Use individual partitions. The problem is at the end, when you click Finish. I get the error: "one of the provided parameters is not valid."

  -Disc use whole. The virtual machine is created, but when I turned on, I get the error:

  "Could not open the disk ' C:\. [..] \Ubuntu 64 - bit.vmdk' or one of the snapshot disks it depends on.

  Reason: the physical disk is already in use. »

  Thank you in advance for answering,

  Kind regards.

  In my tests I couldn't use a host physical diskwith a Windows 7 without setting the disc 'offline '.
  But then you can set the diskette from Windows Startup 'offline '.

  Using Linux or 2003, you don't have this problem.

• Guest OS using NAT and host wireless can ping Google but can't surf the net

  Hi all.

  I just installed 'Vmware Workstation ACE Edition' Version: 6.0.0 build-45731

  I then installed a new virtual machine Windows XP SP2 home edition.

  My host is a business of W7, browse the internet using a wireless network card. (I currently don't have a way to have the physical NIC connected to it).

  My conf wireless host is:

  LAN wireless adapter wireless network connection:

  The connection-specific DNS suffix. :

  ... Description: Connection network Intel (r) PRO / Wireless 3945ABG

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.33 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, December 2, 2010 10:50

  Lease expires...: Sunday, December 5, 2010 10:49:59

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  The goal is simple: be able to surf the web with my guest OS (Windows XP Home edition).

  I first tried to bridge with VMnet0 = > KO (no ping, no navigation)

  I then tried NAT which is by default bound to VMnet08 = > always KO but:

  -I can ping google.com:

  Ping google.com http://173.194.36.104 with 32 bytes of data:

  Reply from 173.194.36.104: bytes = 32 time = 765ms TTL = 128

  -I can not always surfing the net

  When you activate NAT on the guest operating system the ipconfig gives the following:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : localdomain

  ... The IP address: 192.168.31.128

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.31.2.

  I do not have an anti virus installed on the client

  I tried to disable windows firewall with no luck

  I tried telnet google.com port 80 = > KO

  C:\ > telnet google.com 80

  Login to google.com... Could not open connection to the host, on port 80: Co

  nnect failed

  Any help, tracks, ideas, would be greatly appreciated.

  Thanks in advance

  Michael

  Just an info, Windows 7 is not a host VMware Ace/Workstation 6 operating system.  Also why do you install 6.0.0 vs install 6.0.5?

  Have you tried to manually set DNS servers to no known public IP address just leave it to the private IP address that you have shown by default?

  Give a try:

  OpenDNS

  208.67.222.222

  208.67.220.220

  Or

  Google Public DNS

  8.8.8.8

  8.8.4.4

• How to find out really currently used physical memory and swap space of hard disk to the virtual computer running?

  Suppose that I'm leaving WinXP hostOS a guestOS. Then a part of this guestOS remain in physical memory and another part is deployed on hard drive in the swap file resp swap partition.

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  Perhaps only a *.vmdk 800 MB / 3GB is really responsible. But these 800 MB could be extended to 2 GB, because the content of these 800 MB is not compressed during load or guestOS drivers allocate additional memory.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Matt

  mattad wrote:

  First question: the complete *.vmdk loaded into memory/swap space or only the part that is currently required?

  The vmdk is not loaded into memory, because it is the drive of the virtual machine.

  *. VMDK size seems so NO indicator for the actual amount of used memory / swap.

  Yes, of course not. The memory used by the client is not related to the size of hard but the RAM assigned in the options of hardware reviews.

  How will I know how much physical (a) memory and (b) the hard disk swap space EXACTLY is currently occupied by a certain virtual machine running?

  Open the Task Manager and find a task vmware - vmx.exe or vmware-vmx - debug.exe.

  The swap file should be used if you have chosen to allow that VMware Workstation is authorized to Exchange. The file where swaps to door expansion .vmem Workstation. Search folder of comments.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =