Alienware Area 51 R2 memory upgrade help

Similar Questions

• Satellite C660 1E2 - memory upgrade help

  Hello

  I have this laptop which came with Windows 7 and 1 GB of memory - I found very slow the 1 GB and bought an extra 4 GB of crucial DDR3 PC3-8500. When I install the new memory it is bios but Windows crashes (blue screen).

  I don't check before hand, but the existing memory DDR3 PC3-10600, I know running 2 speeds at the same time is not ideal, but it does not have the 4 GB with the 1 GB or on its own.

  Does anyone have ideas - PC3-10600 speed do I need?

  Thanks in advance,

  Craig

  According to specification for laptop, your laptop must be delivered with 2 GB of RAM.
  Are you sure that 1 GB is inside?

  In any case, your laptop can be upgraded up to 8 GB of RAM and compatible RAM modules are:
  1 GB DDR3-1066
  PA3675U-1M1G

  2 GB DDR3 - 1066
  PA3676U-1M2G

  4 GB DDR3 - 1066
  PA3677U-1M4G

  Please check specifications for these modules using the part number. I assume that you now have a problem of compatibility.
  What brand is the new RAM?

• Satellite 4090XCDT - Memory Upgrade help needed

  Hello reader,.

  I own a Toshiba Satellite 4090 XCDT notebook and it came originally with windows 98SE and 64 MB of ram, but I installed Windows 2000 pro and I need to upgrade the memory, I did some Google research on the specs of this laptop and found that this machine is capable of 192 MB of ram , but there is one memory slot, how is possible to get this upgrade when require sticks of memory 128 + 64 = 192 MB, that would mean I'd need two memory sticks to reach the range of 192 MB, from what I see here is therefore the only memory of memory bank.

  Could someone please point me in the right direction and provide me a solution to my problem, any help will be greatly appreciated.

  Cheers MagicBytes :D

  When the memory is empty, the amount of memory is reported?

  If its 64 MB, then you simply install a 128 MB module to achieve 192 MB

• HP m9500y memory upgrade help

  Hi people,

  I have a desktop HP Pavilion Elite m9500y with 8 GB of ram installed.  It supports 16 gb and I am having trouble locating the 4 GB modules to install and replace the 4x2gb modules here.  I want to use Dual Channel for performance improvements that accompany it.  My research shows that I can use DDR II SDRAM 800 Mhz memory.   Anyone know where I can find the memory and what it will cost to upgrade?  I checked Kingston, PNY and a few others with no luck.

  Thank you

  Steve

  Hi, Steve:

  I couldn't find any either when I checked Crucial site, even though it states your PC can take 16 GB memory PC2.

  You run the dual channel mode right now if you have installed 4x2GB strips.

  NewEgg.com sells PC2-6400 4 GB chips of some manufacturers.

  http://www.Newegg.com/product/ProductList.aspx?submit=Ene&N=100007611%20600006067%20600006107&IsNodeId=1&name=DDR2%20800%20%28PC2%206400%29

  Paul

• I need to download and improve the tools of the DPS. My version of InDesign CC 2015 isn't tools DPS that I need. I just upgraded to CC 2014 and found that (generator of folio) tools are missing. Can someone help me?

  I need to download and improve the tools of the DPS. My version of InDesign CC 2015 isn't tools DPS that I need. I just upgraded to CC 2014 and found that (generator of folio) tools are missing. Can someone help me?

  I have a new MacBook Pro 15 "with all of the memory/speed I need to work on folios. I am developing several folios.

  Downloads fail in case of success or not, do not load the Folio Builder I'm use to.

  Paul

  Post edited by: Neil Enns, edited to remove personal contact information.

  DPS is not supported in InDesign CC 2015. You will need to install InDesign 2014 CC-by-side to use DPS tools, that you have used. See download and install Adobe Creative cloud applications to learn how to install the previous version of InDesign.

  Digital Publishing Solution (aka DPS 2015) is supported in InDesign CC 2015.

  Neil

• (Redirected) Upgrade of RAM for my Alienware Area 51 R2

  I need to upgrade RAM in my Alienware Area 51 R2 currently having DD4-2133 Non ECC RAM, 8 GB in 2 homes, 4 GB each in Total. My question is, can I use DDR4-2133 RAM ECC, 16 GB stick in the four locations, a total of 64 GB of RAM?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Alienware Area 51 Tri SLI HELP

  So, I recently bought a Dell Alienware Area 51 with graphics cards from NVIDIA SLI 980 4 GB DDR5. I want to buy a 3rd 980 now directly from Dell. They don't tell me no problem but they don't sell Tri SLI bridges? It makes no sense at all? You are selling computers game, but if we want to add a video card you do not sell the bridge for her? I know that dell has them because you can set up a computer with them, with 3 graphics cards requiring this bridge. If they do not sell this bridge then I give them $600.00 for another purchase of the card. Makes no sense...

  I contacted Dell spare parts to the 1-800-289-3355 service. I could order the Tri SLI Bridge part # GYN70 (Assembly, graphics card, NV, bridge, Tri-State for $139.99). I also contacted a Support technique Alienware (not Dell) and after explaining my situation, they sent the cables needed to connect the extra GPU to supply free of charge. I hope this helps.

• HP Compaq 6000 Pro SFF: HP Compaq 6000 Pro Compact (SFF) - memory upgrade problems

  < <! UPGRADE MEMORY SHOULDN'T BE COMPLICATED! > >

  Chassis: HP Compaq 6000 Pro Compact

  Processor: Intel Core 2 Duo @3. 00 GHz

  RAM: 2 x 1 GB

  OS: Windows 7 Pro 64-bit

  I can add more technical info on request.

  Recently saved this PC of my friend tries to throw it. Everything is fine with the PC. It works perfectly and there is no material visible failure wihtin the PC either. He just bought a new and had no need for this one.

  Before turn me this into a House mutli-purpose server, I decided to upgrade the RAM.

  So I did some research and found this page: http://h10032.www1.hp.com/ctg/Manual/c01883661

  DDR3 240-pin DIMM 1333 MHz non - ECC, Max 4 GB per DIMM slot, Total Max 16 GB module.

  I went and bought RAM Corsair. Link to the product: http://www.corsair.com/en-us/cmv4gx3m1a1333c9

  I decided to get 2x4gb and upgrade later if I felt the need.

  I was happy to install in the PC. one in DIMM 1 slot and the other in the DIMM 2 slot.

  BEEP BEEP BEEP BEEP BEEP!

  I thought that maybe the slots are wrong, maybe they have to odd numbers then numbers.

  So I changed the RAM of DIMM 2 DIMM 3.

  Once again, the annoying ringtone.

  I even tried leaving just the 4 GB DIMM 1 and tried to start the PC, but nothing helped.

  I tried a lot of different combinations with the end result is 5 annoying beeps.

  After that I thought that maybe, just maybe, an update of the BIOS can change things.

  So I installed Windows 7 (I can't stand Windows. Arch Linux FTW) and performing a BIOS update.

  I then installed the new RAM again. Yes... frickin 5 beeps AGAIN.

  I am extremely disappointed at this point. I spent already $ 70 on a computer with free access.

  I read the forums here, but I couldn't find a thread with a solution for me.

  Is there anyone on this forum who could lend me a helping hand?

  Any information would be gladly appreciated.

  PS Please report any stupid error, I did. Stick and stones could not curb my bones.

  Hello:

  See this related post... the elite 8000 is basically the same model as the Pro 6000.

  Resources memory very finnicky needs...

  http://h30434.www3.HP.com/T5/desktop-hardware/memory-upgrade-for-8100-elite-CMT-with-TwinMOS-2x4GB-512x8/m-p/4918937/highlight/true#M95301

• Pavilion G6 memory upgrade

  I'm looking to upgrade to 4 GB memory on my g6 pavilion laptop, but want of memory site to know what version of the g6, IE there are several dozen computer laptop g6-xxxx numbers of model in the list, so he can advise the best elements.

  The pages of OS system information and Device Manager the list just like a g6 pavilion, and the physical label on the back of the camera is not even go that far.  It does not list the item such as a 584037-001, whatever that means.  How can I know which (the suffix xxxx g6) my g6 is in fact so I can identify the best modules of memory for an upgrade?

  Davdik10

  You have a laptop HP Pavilion 2002au g6. Unfortunately you happened to choose a laptop that is not so simple to upgrade.

  You will need to contact an online memory provider and ask them for help to find a guaranteed compatible 8 GB upgrade or buy the upgrade from HP.

  Search for suppliers of memory online using Google or Bing and ""memory upgrade HP Pavilion g6-2002au ' as keywords. " I strongly recommend that you don't settle for anything memory compatible modules less guaranteed by well known memory manufacturers.

• HP 19-2114 Memory Upgrade

  I recently had a 19-2114 all-in-One PC HP free and I discovered that I can improve my same 4 GB to 8 GB and 16 GB memory. I was wondering where I can buy 8GB memory upgrade because I was looking on Amazon and I found that the improvements of memory of 8 GB there are compatible only with certain models (HP 19-2050 or lower).

  Hello

  Please try:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP---Compaq/HP-19-2114-all-in-one

  (Don't look at the picture) And the video folloiwn can help:

  https://www.YouTube.com/watch?v=DQVZac2h_U8

  Kind regards.

• Veriton M498G memory upgrade problem

  I'm trying to age 5 years Veriton M498G memory upgrade my son of 4 GB to 12 GB now when I upgaded to Windows 7 64 bit.

  The original 2 GB key still works fine and the 2 GB key that I added back a bit works very well too (4 GB total).

  But when I remove all the sticks and put in a new 4 GB stick the computer crashes in the POST just after the BIO 1024Mo of RAM (!). Looks like that the BIOS does not like the 4 GB stick! Compensation of the BIOS did not help.

  Back original memory makes the computer works perfectly.

  I am well aware of the memory manufacturer/type compatibility issues.

  I tried 4 different memory of 4 GB sticks from 2 different sources with no luck.

  My questions are:

  1. the Veriton M498G motherboard or BIOS has any limitation on the size of the memory card?

  2 I missed a setup or configuration to let the BIOS see the 4 GB memery stick?

  3. a more recent BIOS help? (the computer uses the original BIOS from 2011)

  4. is there a solution runs the endless trial and error of purchase and return of USB keys?

  The system is:

  Acer Veriton M498G

  Processor: Intel i3

  S/N: PSVAQ03005 *.

  MFG date: 18/01/2001

  Thanks for your help.

  Michaud

  [edited for the protection of personal information - please do post any personal or unique information such as but not limited to all names, email addresses, telephone numbers, full of serial numbers, etc.]

  Hello

  The crucial memory modules too.

• HP Probook b 6450 memory upgrade question

  Hi all

  I seem to have a strange question seeks to upgrade the memory in a HP 6450 b probook (i5 - 480 m & ATI card). The laptop came with 2 GB of sps p/n 598856-002, which is ram 1333 mhz 1.5V with the manufacturer being ramaxel. I ordered and installed a few sticks of kingston 4 GB

  http://h30094.www3.HP.com/product/SKU/10473659/mfg_partno/KTH-X3BS/4G

  Mounted to them and all appeared to be as well as the operating system (win 7 32 bit pro) showed the recognized as 8 GB stick and 3 GB usable, the bios also reported 8 GB as well. However the moment that a 64 bit OS (Linux or Windows) is tempted to run just the laptop falls down or crashes

  I already tried this upgrade with two sticks of crucial memory but had exactly the same problem, so think about crucial memory was the question I put to the supplier and ordered the kingstons rather.

  I saw very similar question mentioned here:

  http://www.TomsHardware.co.UK/Forum/328016-30-memory-upgrade-ProBook

  and

  http://superuser.com/questions/580512/HP-ProBook-6450b-not-booting-after-memory-upgrade

  My instinct suggests this notebook can be very picky about the memory chips, it may have to be a 4 GB key 16 chip versus chip 8 4 GB sticks.

  Thoughts and help on this would be greatly appreciated.

  Thank you

  You are the very welcome.

  Yes, I have never, ever install any module of memory in my notebooks from HP that does not 16 chips.

  All the chips I use - 2 gigs and up, have 16 chips (8 on each side).

  Never had a problem.

• Profile of Alienware Area - 51 ALX Intel XMP A10 does not work with DDR3 1600 MHz

  I bought three Kingston 8 GB RAM DDR3 1600 MHz 240 pin DIMM that totals up to 24 GB of RAM and install in my desktop computer. When I turned on and the message appeared saying:

  Maternal health and infant is running with DDR3 - 1333 MHz

  WARNING! Previous overclocking failed, and system restore its default value. Press F1 to continue, F2 to enter Setup Menu

  When I access the BIOS setting (version A10), I disabled XMP and then it went through fine after the reboot. However, I have to have XMP allow at any time? How can configure profile 1333 MHz to 1600 MHz XMP?

  What bothers me is that I had three former PIN of Kingston 4 GB RAM DDR3 1600 MHz 240 DIMM which total up to 12 GB of RAM and the XMP worked very well with them before they were 1600 MHz.

  The type of computer I have is:

  Alienware Area-51 ALX

  Intel Core i7 980 Extreme 6 c with 12 MB of Cache

  Windows 7 Ultimate

  Please, help me to solve this problem. Thank you.

  See this:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19471694/20209913.aspx#20209913

  And I certainly don't have the answer, but I'll remember these points:

  1. I think that you can set manually nothing XMP adjustable (but with more control).

  2 machines often memory need to be slowed down when you are near maximum capacity look maintenance manuals.

  3 area-51 has never been tested or even allow the 8 GB DIMMs. You are in the new territories.

  4. If you really need 24 GB (and it works at 1333) then the 267 speed drop is insignificant.

• Dell PowerEdge T610 (memory upgrade)

  I bought Dell 16 GB certified replacement Memory Module for select Dell - 2Rx4 1333 MHz RDIMMS LV systems

  Currently, I have 8 GB of RAM (1 GB on every slot machines). After I installed this new memory and restart the server, it shows invalid memory configuration. So, I changed the memory setting in BIOS 'Advanced ECC' to 'optimize memory '. But it detects more than my current speed of the memory is 8 GB. Is there something wrong with the configuration of the memory? I tried to re - establish the new RAM.

  Help, please. Thank you.

  Hello.

  Your memory configuration is not valid because the channel memory CH0, is not balanced with channels CH1 & CH2. Refer to the schematic illustration below:

  

  In order to balance the memory on these channels, we should have memory DIMM in:

  A1, A2 & A3 = B1, B2 & B3 in addition also A4, A5 & A6 is B4, B5 & B6. That's why CH0, CH1 & CH2 memory modules must be identical for the performance and optimal memory configuration. Depending on the upgrade amount of memory you are looking for, you can buy 1 more 16 GB DIMMS and then fill in slots A1 B1 & offer a total capacity of 32 GB. This will provide more flexibility for future memory upgrade

  Let me know if you have any other questions.

• Asus Rampage Extreme on Alienware Area 51 v

  I want to buy a motherboard Asus Rampage V extreme, the question is, can the motherboard fit in Alienware Area 51? because V of Rampage Extreme is E - ATX.

  Thank you!

  ' ATX = 12 x 9.6 >< e-atx="12" x="" 10.7="" --=""> about 1.1 ' wider

  your stock mthrbrd is set on a mthrbrd platter (tempan), brand new mthrbrd will have to fixed tray to even, holes (spacers) will have to align. No matter what tray spreaders who don't align must not be isolated. "By the look of it, you would lose your black cable Organizer, should be two new holes in the status bar, moved more 1.1" etc. (industrial velcro, so no access to a forest of w/metal as a temporary solution). Your best bet is to buy your new MB from a source who will accept returns, in which case e - atx is unable to mate with your bin to mthrbrd, or available wall space.

  you need to find an e - atx vs atx Visual model that shows the mounting screws/holes, see if they line up basically. My Nzxt Phantom 820 is a ultra-tour, larger than Area51, he accepts e - atx & xl - atx, but I have to take my mthrbrd to see if the holes match my Asus atx Board in there, I'm sorry, I can't help with this answer, if the holes match; from memory, they do well (?). Keep looking online for a visual aspect to mounting e - atx atx vs relative to each other, you can even make a comparison from the view of atx Asus and cards cards e - atx looking for mounting holes - for me, it seems that the holes of the Rampage corresponding atx & Council simply "straddles" a thumb

  

  Council e - atx mount holes need to coincide w/tempan; those who do not need to be isolated from the MB. Where the edge of this stock mthrbrd dies at the level of the external right screw holes, Rampage just seems to scoot an inch more. Cable organizer needs came up, moved to the right an inch.