OfficeJet 6500 Series E709A: aligning the print heads whenever the printer on

Similar Questions

• OfficeJet 6500 a: how to adapt a HP Officejet 6500 has so we can print on both sides

  Hello dear hp team

  I have a HP Officejet 6500 has more that color print on both sides.

  Now, I have only a 6500 a which initially can print one side.

  I changed the room in the back (I put the piece of the 6500 has more printer) so that mechanically, he has the ability to print also the two sides.

  Now how do I program the printer so that it detects that he now has the ability to print on both sides?

  Thank you for your reply and sorry for my English mistakes.

  A student of the Swiss school.

  Hello

  As suggested in the post above, only available for the printer manual duplex printing.

  The accessory of the duplexer is designed only for he 6500 more than model a, it is not intended and cannot be used with the model 6500 a, as you can find below:

  Suitable only for HP Officejet 6500A Plus e-All-in-One Printer - E710n
  

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E710/4083974/model/4083869/document/c02492482/

  Shlomi

• HP Officejet 6500 E710a: HP Officejet 6500 E710a Scan but not print

  I have a HP Officejet 6500 E710a.   He has worked with every other printer I connected to.  It can scan via the USB on my laptop Lenova connection but will not print documents.  I have Windows (Win 7).  I tried all the options troubleshooting including uninstall of the printer and allowing windows to find and automatically install it but no good.  Then, I made an update of the driver printer full of windows and tried with the latest dirvers HP Officejet 6500 Series E710a, but still not good.  The printer is connected directly to the laptop via the USB port - without hubs etc. What can I do now?

  Mysteriously, HP sent me an update tonight. I installed it.  I also reset my impression of parameters by default (not that she needed). Turned power off and then back on. Restarted my computer and magically something I am woring on since a week not working finally.  I PRINTED A TEST PAGE!  Thank you for reading my HP forum page. You are the best!

• . HP Officejet 6500 E710n-z won't print BLACK

  HP Officejet 6500 E710n-z won't print BLACK usining Excel 2007.  I don't think it's a clean printer, but was jump there ' All could have at least a direction for a fix or solution

  Win7 full cartahers printing.

  Thanks for the reply with more information.

  what you did may limit the possible cause. at least we know that this problem is caused by excel, below is a workaround solution that you can try:

  Looking at the 'Print Preview', confirms is the black appear or not.

  More top issue will be useful for further refinement.

  Copy / paste from the old file by excellent:

  1. create a new excel file

  2 paste special

  3 'text' only

  4 repeat the format will help.

• IPhone 4 and Iphone 4s, not being not able to pick up officejet 6500 a - 710 to a printer while

  IPhone 4 and Iphone 4s, not being not able to pick up officejet 6500 a - 710 to a printer while

  my mother bought two, one for him and for me, I set his first, then returned to do mine.

  I managed to print ONCE! His works very well.

  I created his exactly the way I created his own. The other difference is our routers.

  I have not hers, not mine wired to the computer.

  I have reset the router, phone, computer, internet, printer box! its on the same WiFi as the computer and phones.

  the software is updated on the phones and the printer.

  I have a linksys router rangeplus wireless model # WRT110<>

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 a.149.  We will use 192.168.1.200 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -Enter for the first DNS 8.8.8.8.  Enter to the second DNS 8.8.4.4.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Officejet 6500 e709n: default alignment and black ink does not print

  Adapting the failure message.

  Black ink does not print.

  I chose clean print head - more than once.

  It took several alignings, printer status reports, wiping excess ink and so on.

  After a day or more, the HP6500 Officejet 6500 e709n printed ink black.

  Just a note:

  My color ink cartridges are very low.

  I just use black ink.

  Thank you for your response.

• HP officejet 6500: unable to connect the printer to my Nexus 5

  I can't locate or connect manually to my hp officejet 6500 all-in-one printer from my Nexus 5 Android phone to Marshmallow.
  Other devices (laptop, nexus 7, other phones) on my network recognize connect seamlessly.
  But since my last system update (6.0.1) the unit cannot find my printer.
  Manually enter the IP address of the printer, generates a message "unable to communicate with the printer.
  I have tried to stop and start the plugin service HP, memory and cache plugin, uninstall and reinstall the plugin wiping the cache of the clearing system. But in vain.
  Any help would be appreciated.

  Thank you
  Eran

  Hi @Aardvark1,.
  Thanks for your reply,
  I tried many things before posting, as well as turn off and restart the nexus 5 or disconnect from the network.
  I try to connect to the integrated Web server, I didn't know that it was possible to see the printer through the browser...
  But the problem is finally solved, when as one Hail Mary after resetting on all around me, I restarted the router. Since the Nexus 5 recognizes and connects to the printer without problem what so ever :-)
  Thanks for your help,
  The thread can be closed now.
  Eran

• Publisher cannot connect printer wireless Officejet 6500 has E710e and the laptop over the network

  I just changed my ISP and moved to British Telecom, who sent me a new router. The new service is in place and working well and I reconnected my Officejet 6500 a E710e CN557A to the wireless network. But I can't connect the printer to my laptop no matter what I try. I have uninstalled and reinstalled the printer on the laptop using the original CD and then updated to the latest drivers. I even reset the printer to default and then network related setting before attempting to connect the portable computer whose IP address of the printer without success. My laptop OS is Windows 7 32 bit and the printer is just over a year. He worked like a dream with the old wireless network.

  I have already downloaded on my laptop HP - HP Print and Scan Doctor diagnostic tools and troubleshooting network printer connection. Printing and scanning doctor can't see the printer and I followed the instructions of troubleshooting without success.

  Any help and advice would be much appreciated.

  If it is a BT Home Hub, they don't play well with HP wireless printers.

  You can try this - remove all instances of your printer in Control Panel > devices & Printers. Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Impossible to scan, fax, or copy of HP Officejet 6500 All-- E709a One in

  I can print from my HP Officejet 6500 All - in - One-E709a, but I can't scan, copy or fax.  All drivers and updates are underway; No recent updates have been made before the problems that occur. I use Windows 7 64-bit.  When the printer is turned on, it still shows Original charge, but no documents are in the charger or on the glass (I already cleaned the glass and have ensured that the lid is tightly).  I have problems to scan, copy and fax. The automatic document feeder works.  I tried to reset the printer several times.

  When I try to scan a document into the document feeder (it feeds through) or from the glass, I get varying answers - rarely, he asked well how I save/handle the doc (e.g., save them in pdf format), but the document does not actually scan and I'm headed to reload the document OR it displays no. Scanning Options. The document does not appear in my analysis.

  When I try to copy, it shows the document as copy, but there is a long delay before the progress bar occurs.  When I copy using the document feeder, I actually get a copy (rarely and always disappeared - looking) or copy prints white - two results are always followed by an error message to reload the document.  When you copy from the glass, the copy print in white with an error message to reload the document

  The same problems occur when you try to Fax.   If trying to scan, copy or fax, the printer does a lot of gears whirring noises.

  Again, I can print a document from my PC without any problem, the problem is limited to scanning, faxing and copying.

  I tried the doctor of printing & scanning HP.  It always stops at the HP Twain scanning stage, saying that the scanning process was cancelled by the user (not true).  When I click on continue, it proceeds to the stage of Test analysis, but nothing happens when I click the button of Scan Test.  It only will allow me to ignore at this point.   All the other steps show green checks.

  My first question is really going to reach the merits of the case, I heard you say that the printer produces noise, but if you lift the bar A) trip through the screen and the light cover B) up?

  In addition, perform both of these resets and I would like to know how they are!

  All-in-one HP printer reset - HP Officejet 6500 - YouTube'

  Have a great day!

• OfficeJet 6500 has more will not print black - Solution

  My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

  How to reset the 6500 has more

  Thank you

  I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

  My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

  Steps to fix it.

  1. remove the cartridges

  2. remove the cartridge door / carrier, lift the big lever to release him.

  3. clean the contacts of the cartridge with water and cloth.

  4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

  5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

  We then conducted cartridge alignment and it 'Fail' printer still does not work.

• OfficeJet 6500 a Plus: clear the call history

  I would like to know how celar to the call history please. I deleted the history of fax and restored factory settings (settings > tools >) but on start-up again calls on any phone numbers history is still there.

  Hey @Appt,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the story on your Officejet 6500 a Plus e-All-in-One of compensation. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see in a message private shortly.

  Please let me know if that clears the history. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Support for HP Officejet 6500 is stuck to the right

  My HP Officejet 6500 cartridge cradle is stuck to the right and won't spend. It also reports a paper jam, although there is no jam. I use Windows 7.

  I tried the tips in the videos of support, but it does not help.

  Please notify.

  Hello Kristen,

  Sorry for the late response - I see your message until now.

  I hope that you have already found a solution now, but in case you haven't:

  As I remember, I just searched the Web for HP authorized service providers.

  In my country (Israel), there were only 2, so it was not difficult to choose :-) and then I just called them.

  Moreover, in my case the repair cost about half the price of a new printer, a newer model, which comes with ink cartridges and arrives at your House. Because I needed the printer of emergency for commercial purposes, I chose to fix the damaged, but if I didn't need it right now, I would probably chose to order a new, rather to bother with going to the service provider with the printer, and then goes again to pick up the printer fixed.

  Hope that helps.

  Roy

• OfficeJet 6500 709n: officejet 6500 709n does not the wireless

  officejet 6500... finished 709n Setup... found and entered the network password... printer shows successful login... computer even wireless network... displays (6500) printer queue of the printer but don't print that physically connected via USB Port... when it is not plugged, in the HP utility message "unable to communicate with the device selected. He may have been arrested or otherwise cut "below,... " nor is the case... HP support is completely useless... Please help... thank you... GEO

  I'm on a laptop from MacAir running OS 10.10 Yosemite

  

  A forum support person was able to direct me to a solution...

  It happened as follows:

  I entered IP address * printer 6500 in the browser bar...

  Opens the Web page of the printer and established a wireless connection...

  Then I DELETED the printer and drivers the MacAir fax

  cue the printer and re-installed the print driver for the 6500 709n

  in the list of available drivers MacAir...

  After that, the wireless connection that could not be made

  used to set up and I was printing without the

  Connecting the USB cable ever since...

  Thanks Forum!

  * IP address of the printer was on the configuration page I

  has been able to print when connected cable OSB... If not, a

  MAC address must be in the back of the printer on a sticker...

  some of these instructions were not specifically made clear in

  General installation information and troubleshooting

  Notice... to me... good luck!

• HP officejet 6500 has more: press the button doesn't work is not on the right side

  Hi I tried to turn on my printer and it is stuck on maintenance mode and will not work my right from the touch pad is there a replacement for the touchpad or a way around the mainenance mode?

  Hello @jgrier1,

  Welcome to the forums of HP.

  I understand that your printer is stuck on maintenance mode and the touchpad is not responding.

  I would like to help.

  I'm sorry, but the display on the Officejet 6500 has more, is not a replaceable part by the user.

  Try to go through the document next to the touch screen.

  It also can you go beyond the question of maintenance mode.

  The touch screen is unresponsive

• HP officejet 6500 has E710 trying to print maps to 5x11.5. Continue to be "paper size mismatch.

  I'm using a computer laptop windows 7 and printing by using word.  OfficeJet 6500 a E710 printer can't print as needed.  Get a "paper size disparity."  The paper is 5 "x 11.5".  Any help would be greatly appreciated.

  Hi maryhat,

  According to the specifications of the Officejet 6500 a, sx11.5 is not a supported paper size. According to me, that is why you get paper mismatch message. You see this error when you print other sizes?

  

  I hope this information is useful.