PSC 1350xi and cleaning head alignment

Similar Questions

• HP 3520 while a printer does not print black after changing ink and cleaning head

  My 3520 printer all-in-one will not print black after cleaning print head and replacement of black ink. the printer is a little older than a year. All printing inks.

  Hi handytim1,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cleaned the printhead and replace the cartridge without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  Let me know the results, I'll watch for your reply.

  Thank you

• The print and print head alignment failed.

  Black ink does not print than other print colors. "In addition, message" alignment failed "shows. Printer HP Photosmart C8180.

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. Press SETUP (key tool), and then
  2. Press TOOLS, then
  3. Press the clean printhead / cleaning the cartridge.
  4. Now try printing.

  You may need to try the above steps 2 - 3 times.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as accepted Solution !
  See a great post? Give a Kudos!
  I work for HP

• The life of ink cartridge and print head alignment failed

  I use an Officejet Pro 8500 A910 and did not have any problems with it until I recently changed the ink two weeks ago.

  I bought HP original on Amazon UK and after four attempts to align the print head (which fails permanently), my ink for all, but the black cartridge high capacity is exhausted.

  I havn't print all pages in full color, black only for the ebay postage labels.

  Hell this printer that consume all my ink in five attempts to alignment?

  HP will reimburse me for the color ink cartridges?

  I solved the problem.

  BUY A CANON INKJET...

  It cost me less than a new set of cartridges for the HP OfficeJet

• not printed; print head alignment failed

  I bought a printer HP 6700 Premium last summer (2012) and made a montage for use by WiFi connection to my laptop Dell Inspiron 1700.  The printer worked fine for 2 months, he was used before packing away until may 2013.

  To start using again once I got an error message regarding the Set up ink cartridges.  Assuming that the cartridges were parched of non-use, I have bought/installed HP 933 XL (color) and 933XL (black) ink cartridges.  All indications from the printer indicates that the cartridges are installed correctly, and that all are new/full shells.

  The printer continues to not print under the orders of the normal print or with orders queue on the printer for reports such as the 'printer status', 'Print quality', etc.  I also asked 3 times the printer functions "align the print heads", with a message of continuation of the print head alignment failed.  Show based on the "clean printhead" printer (twice) also failed to solve the problem.  When producing a page using above mentioned orders, the paper emerges with images very low (and widely dispersed).

  I'm not a person technically the inclined and would be very grateful if anyone could advise on the potential problems noted, and suggestions for the resolution of it.  Thanks in advance for your response (s).

  Hi Plapen,

  Can you double check your black ink cartridge.  What is a 932 instead of 933 cartridge?

  If it's a 932, can your try to clean the cartridges 2 times more?  Are there changes?  If this does not help, take a look at the following link and try all measures not yet taken.  Click here  Let me know how it goes.

• Error message - head alignment failed

  My printer does not print not in 'black '.  The other colors work properly.  I installed a new black print cartridge and then tried to clean the print heads and finally by aligning the print heads.  I get the error message on the printer console screen that 'print alignment failed '.  I downloaded the HP hardware diagnostic tool and it could not solve the problem.  Certainly, the problem is with my hardware of the printer that I can't even use the "copy" in black.  He's spitting just a blank page when you try to copy something.  Any suggestions?

  @recooke - thanks for the response. I look forward to hearing your comments when you get a chance to work on the printer. The community has indicated how the question turns once you get an opportunity of but the troubleshooting in the action steps.

• Satellite Pro A120: disk head alignment error is displayed

  I bought an AE120 on 12 Dec 06. It worked when first turning the power on. When I push the cell phone, the "vibration problem" message appeared and followed by "drive head alignment error" what made me afraid to use it more.

  So I returned the computer laptop vendor and bought the model replacement unit exact. The second unit came on 19/01/07. When lights first, the exact situation came and I was not convinced to use this laptop yet, but the second unit to return to the vendor.

  I don't know if these two units came a bad batch and I don't know if I should buy the same unit, the third time and hope that this error would not come to the top.

  Pls advise if it is a fault or a bad batch.

  Hello Belinda

  I am very surprised that your local provider was not able to explain that you want to happen exactly.

  In any case, this message is not serious and there is no reason to worry about this. If your laptop has the factory settings it is preinstalled Toshiba HDD Protection tool. The exact explanation of this tool is as follows:

  HARD drive protection
  Using the acceleration sensor built into the PC, HDD protection detects the vibrations, shocks and sings it similar in the PC and the disk head HARD automatically move to a safe position to reduce the risk of damage that might be caused by the contact of the head-to-disk.
  You can disable this message. Start detail TOSHIBA help protect and difficulty HDD Protection Setup.

  Under HDD protection Message remove check mark in front of a display of message when. option.

  Goodbye and enjoy your new toy. ;)

• Why the hp officejet pro 850 always clean heads printer etc etc on start up?

  Hi my printer always seem it self check on every time I start it. It checks the parts themselves, calibration and printer heads. It takes about 1 minute ot more cela and offers in the menu, it might take longer than that. Certainly there is a way to bypass this not only for the inconvienience but also to save the planet and reduce the costs of electricity and the additional movement create.

  Can anyone help?

  If not can you me say there is no way so I don't know. If there is not a way HP are not helping the environment in my opinion. It is fair to say, it works at lower costs than most but when even why the controls each time to the start?

  Thank you!

  [I am assuming that you actually have an Officejet Pro 8500 printer.]

  This printer uses pigmented inks.  They have more long-lasting light, but they are also more likely to clog.  Maintenance that you hear is the printer prepare to print, clean and wipe the nozzles so they will print good pages.  There is no way to eliminate it, and the result is better for the environment than to print pages tha tneed be thrown out because the first line or so do not print correctly.

  page explains here how the ink is used in HP printers.  The Officejet 8500 series is a printer IIC in the nomenclature of this page.

• HP psc 1350xi connection

  I have a HP psc 1350xi legacy and trying to connect it to a new desktop running Windows XP (32-bit) to connect it to a USB port. Unfortunately, I don't have the original 1350 CD startup for Windows disk.

  Before the breakup of the hard disk (drive C) in my previous desktop my HP psc 1350xi worked fine with Windows XP and a USB connection.

  Downloaded a new driver from HP. First tried the full function (343 MB) version gc_w01_ENU_NB and what that would not work tried the reduced pilot drv_gc_wo1_ENU_NB (36.8 MB). Tried to activate them (one at a time) and got the indication that they went through the extraction of 100%, but nothing after that.

  Restarted the computer. Then plugged in and turned on the psc 1350xi.  (Also switched the USB cable and I tried many times).  The "new hardware found" appears. He asks a CD with the software for this printer. Made a CD with gc_w01_ENU_NB about it. Did not work. Tried the same thing with the reduced pilot. Did not work. Then tried to use install from a list or specific functionality of the wizard locatio. Used the list of properties for the file, the software is on the C drive. Did not work. The indication I get is "the specified location does not contain device information files. Please enter another location or uncheck the "include the location in the search box." "The psc 1350xi is a plug-and-play device, I wonder why the"New hardware"Wizard should appear, other that the software drivers cannot be located at all.

  During this time the psc 1350 does not appear in the control panel for printers.  What appears is "send to OneNote 2007"(avec le chèque en indiquant que c'est l'imprimante par défaut) and "Microsoft XPS Document Writer." "."

  Clues or tips?

  Hello

  First of all, sorry to fill your PC full of software unsable and break your search functions.

  Are you able to do a right click on the file you download and choose extract of 7zip?

  If so, check out the files in a directory, and then student material on this directory Setup Wizard when you plug the USB cable.

• Impossible to change the table column heading alignment in 11.1.1.5

  11.1.1.5 work.
  
  I want to align to right one of my headers of columns in the Table view. I'm going in the criteria, the column properties tab. Format of the column and clicking the Format icon next to the column heading box. I'm on the column properties dialog box, change the background color, adding a border and right Horizontal alignment setting. See the table in the results, I see the background color of the column heading, and I see the border. However, the column header text is always aligned to the left.
  
  What Miss me it please?

  Hi Mark,

  You do not have lack of what, whether Oracle has missed this basic functionality! This is a bug :-(

  Bug 12696084: FORMAT HEADINGS > HORIZONTAL ALIGNMENT does NOT WORK IN THE TABLE OR the PIVOT VIEW

  Rgds,
  DpKa

• I have used IE first time in 3 years. I have READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. Failed. Ideas please.

  I have used IE first time in 3 years. When I did, I could READ the screen without my glasses. I didn't know that Firefox FONTS were 'low' tried almost everything to get Firefox fonts look as "BOLD" and clean. No luck.

  How can I get Firefox to DISPLAY a more clear and clean police as Word? I choose different fonts in Firefox and sizes and nothing is really happening.

  You have clearly Type is defined on your system?

  • See-> http://support.microsoft.com/kb/306527

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Have need for instructions how to open and clean the fans on Satellite P10

  There are two fans under my P10-304, however, the right fan doesn't seem to work and the keyboard rankles enough easily. Even with a cooler, it doesn't help much. I wonder if I could open fans and clean them and also the heat sink? If I can, some instruction please.
  Thank you very much

  We just cleaned the radiator and fans of our Toshiba Satellite p10 it overheats and turn off, especially when we tried to launch a DVD or new software... so frustrating... The radiator was full of dust was so obviously draconian need a cleaning. Now, we can not log in. The screen remains black and nothing happens except the blue light comes on, the cooling fans stir a bit... but that's all... BIG SCREEN BLACK WHITE FAT... ARGGHHHHhhhh what we do... No matter what your computer gurus help toshiba would be greatly appreciated... NL

• Pavilion dv7 series c 6 000: arrow stuck even with this key removed and cleaned

  My operating system in windows 7 editoin House. Because of this issue drop-down lists do not currently work.

  For some reason, my right arrow is stuck. I mean, even if it has not been pressed the right arrow key, that is as it is pressed repeativly. Examples; My volume goes down automatically when I press the "speaker" icon, pages automcally Scrolls right and if I press shift in firefox I go back a page, the short cut because it's shift-right arrow.

  What I tried so far; uninstlling and reinstall my keyboard driver, the keyboard driver update, restart my computer several times, by installing a new touchpad driver which is suppose to fix this happing with the ctrl key, updated the touchpad driver, my wireless mouse freeze, removing the right arrow and cleaning out and ensuring that key filters , sticky keys and ToggleKeys are all off.

  Help, please. My computer is not very functional with this problem occurring.

  I'm done to restore my system to a previous save point. For some reason, it updates from hp that I installed caused the error.

• HP Pavilion g7-2200sa Notebook: disassembled and cleaned cooling fan but still does not

  Hi guys,.

  A few days ago my cooling fan packed in and my laptop closed indicating a 90 b cooling fan error.

  I have disassembled the laptop, removed the fan and clean all the dust from the fan and the exhaust gas (there was a good amount in there, the exhaust seemed quite blocked upward).

  Him having moved up the cooling fan still does not spin. What should I do next? I am happy to buy and adapt a new fan but wanted to be sure that would solve the problem?

  Thanks for your help

  Hey guys,.

  Incase anyone is interested. I bought the new blower for the sake of £6, he set up earlier and it works fine.

  If you plan to try it yourself, I had never taken apart a laptop before, I watched some videos on youtube and then for what he

• E5 - 572 G ram and cleaning of laptop upgrade

  I won't lose the warranty or not, if I go to a local store to improve my RAM memory and clean up my laptop?

  Hello

  Opening the laptop do not cancel guaranteed, until there is no damages, so rest assured you, Cheers