Alignment on my HP C 4340 all-in-One test is repeated.
Why my printer test page "Alignment" every time I try to copy something?
I just installed new ink and it has never done this before.
THX
Hello
If after the reset, the guard printing alignment page, let the print once, disconnect the usb cable from the printer, put the page into the scanner and press the scan button. This will align the printer and it should not print the page again.
Tags: HP Printers
Similar Questions
-
Failure of the alignment of cartridges HP Officejet g55 all-in-one printer.
Please notify. Thank you.
If you use cartridges done the alignment fails, you must use only the HP cartridge on HP printers.
-
How do you re - align a printer HP PSC 1400 all-in-one is not printing?
Could someone show me please how to realign a printer HP PSC 1400 all-in-one not print after paper jam could only be released, with difficulty, from the front of the tray of the printer. Thank you.
Hello
You can do a hard reset with the printer. Be sure and remove the ink cartridge before unplugging the power cord. This will ensure that the cartridges to realign itself when they are inserted in the after that the printer invites you to do so.
Hard Reset:
Unplug the power cord from the printer and the wall
Take out the toner cartridges.
Wait for 30 seconds
Plug the power cord into the printer and the wall (be sure that the printer is plugged into the wall and not a surge protector)
Replace the toners/cartridges in the printer
Let me know the results
-
HP Officejet 7310xi all in one: printer keeps repeating transport jam
My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.
Hello
Please visit the link below to fix the problem
-
Photosmart B010a All In One test print O: K: does not the computer print
EGR: GIS. No error message in the control panel is READY, printed the test. Don't print your computer. 6220 with windows 7/64 bit HP computer. = network WI Fi of tiscali. the printer is connected with a cable to the computer. I also tried with the doctor. Please help me understand where I went wrong; I installed the last type of software and drivers available. Thank you, cordially Costanzo
Photosmart All In One B010a stampa di prova 02: computer dal non stampa
EGR: GIS. Message error nel pannello di controllo pulito PRONTA di Nessun, ha the prova stampato. Stampa NON to dal computer. HP computer a window 6220 con 7 64-bit. Rete is tiscali WI Fi. stampante e collegata con computer of al it cavo. Ho tried anche con doctor. Per favore save a just dove ho sbagliato. Ho da the Ultimo tipo di software e driver available. Grazie, Web Saluti Costanzo
try to connect the printer to your laptop with USB connection.
-
Color all-in-one test page OK but not printing colours
My 2355 has worked perfectly for years, but recently print color correctly applications won't like Word. For example, a green background print as light blue and yellow vertical stripes, and the photos are different shades of pink. The color cartridge is full and the printer test page is fine. I did all the help steps recommended to clean the contacts, etc.. It seems that the software is not properly talk to the printer.
I myself have solved by uninstalling my printer and then reinsert. Now it works perfectly.
-
Deskjet F4400 all in one test page prints the missing lines and partial characters
Haved tried to use the doctor print re - install the printing software, clean print cartridges, manual and automatic. Tried new print cartridges, nothing seems to help. Someone has ideas of what to try?
Sorry, this printer does not have the detachable printhead.
You may have to contact the HP Support (1800-474-6836).
-
All-in-one HP DeskJet 2130: all-in-one x 2 align
I can't get an alignment page printed with my printer all-in-one HP DeskJet 2130 new (just out of the box).
I have installed two ink cartridges, loaded paper and did not get an automatic alignment page print as the directions say I would. I put a piece a document on the glass of the scanner as shown and then press the START COPY BLACK button nothing works. The book comes out just of Virgin. I do the same thing with the button COPY COLOR START, get the same results.
I turned the printer market twice, installed the printer software and tried again... still a blank alignment page.
I used the new ink cartridges, not supplied with the printer... could they be defective? Any ideas? Thank you very much!
(Wireless Internet connection, if it matters.)Hi @TillyBonsall,
Welcome to the HP Forums!
I read your post about how you get a page Virgin alignment with your printer HP Deskjet 2130. I'm happy to help with this alignment problem.
What happens if you try to print a self-test page? Print a self-test Page.
What operating system you use, Windows or Mac? What version? https://www.whatsmyos.com.
In the meantime, please, try the procedure described in this guide, "Alignment failed" Error Messageand let me know what happens!
If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
I hope hear from you soon!
-
Signal repeated on Officejet 6310 all-in-One paper jam
My all-in-one OfficeJet 6310 repeatedly says "Paper jam" when there is no paper jam, and I have to keep pressing OK until the printer prints. Sometimes the back panel pops out and I have to re - insert. Sometimes the paper (I use HP paper) feeds wrong on one side and jams. Usually before the printer indicates "Paper jam" there is a dull inside, as if the printer is going through a series of internal cycles. Then a blank sheet of paper feeds through. This printer, renovated, was sent to me by HP as a replacement in 2007. It works fine on the copy, scan and fax. Printing is the big problem. All the answers? I can't see all pieces of paper or something in the printer. I use a HP Pavilion Notebook PC DV4307cl with Windows XP.
Hello
Congratulations... :-)
Help the community by marking this post.
Your question has been answered? Mark it as an acceptable Solution.
See a great post? Give a Kudos!Best regards, Jabzi
-
Windows XP SP3
HP F380 printer all in one
Center solutions HP, HP Photosmart, HP Photosmart Express and HP Document Viewer.
I installed a new color cartridge and later added a new black ink cartridge.
A message from HP to align the cartridges and I have already lined up both times, but continue to get messages
popping up all the time when the printer is turned on.
Please help me to remove the messages to align!
Try to clean the print head and cartridges and see if that helps.
-
HP Envy 5530 e-all-in-one: envy 5530 E cannot detect alignment page
I'll put up a new e-all-in-one printer HP Envy 5530. I went through the installation OK, until I got to the part about the alignment of the print cartridges. It prints the alignment page, it will copy even, so I know the scanner works. I printed several pages and they all look great. But when I use the ink cartridge alignment tool it does not detect the alignment page in the scanner.
Yes, it is face down on the scanner
Yes, the cartridges are installed OK
Yes, printing seems good
Yes, the scanner can scan and print pages, even the alignment page
What else to try?
Thank you
Well, too bad. I unplugged, moved the card to a regular wall outlet instead of a power strip, and it is turned on, ask to do a print alignment.
I did, it printed the page, I put the page on the scanner and it completed the alignment.
I don't know what the problem was earlier, but it worked this time.
-
Unable to print the alignment page All - in-One D110 full
I recently changed my printer cartridges and I cannot print a full alignment page. I tried all the troubleshooting steps I can find and still no resolution. Any help would be greatly appreciated. Or if someone has a picture of an alignment page fullsized. This could be useful.
George
Hello @george5005,
Welcome to the HP Forums!
I understand that you can not print a full alignment using the Photosmart D110A page. I will do my best to help you! Please follow this entire document of HP a "undetected alignment page" or "Cannot be alignment" Message displays on the all-in-one.
Try cleaning the printhead a couple of times until you receive a satisfactory quality. Please post your results, I will be looking forward to hear from your part have a good night!
-
The problems of alignment of the HP all-in-one print cartridge and color copier product families
Click here for a detailed description of the following steps to solve the problems of alignment of print HP all-in-one cartridge and color copier product families.
Step 1: review the alignment page paper was printed on
Second step: the alignment page prints correctly
Third step: perform a print cartridge cleaning procedure
Step 4: try to align the page again
1 automatic alignment of cartridges
2 models with the semi-automatic print cartridge alignment
3 "errors of alignment page not detected."
4 additional information
a. examples of alignment pages
(b) without going through the print cartridge alignmentClick here for assistance based on the cartridge system is using your printer.
Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.Best regards
KennethI hope this helps!
-
All-in-one HP Deskjet 2512: all-in-one deskjet HP 2512 / "alignment failed".
I installed a new HP ink cartridges (61XL) in my all-in-one printer of 2512. When I try to do the alignment (several times), I get the message on the screen of "alignment failed". Printed, but not correctly. Does anyone have a solution?
Thanks RnRMusicMan. Received the email and am now waiting on a phone call from Michael (HP rep).
-
Printer: HP Officejet 7410xi all-in-one + CD of Installation
Computing: Dell XPS 8700
OS: Windows 8.1
Question: Printer error message... Align the cartridge to the right... "The right (black) cartridge is not empty. He worked until the middle of print job. Place another cartridge in printing is faded to the right and dark on the left with no error message.
What is the difficulty that these cartridges are expensive!
Hi @xandux,
I see by your post printing went on the right side, you tried a new cartridge and have the same results. I can help you today.
I would like to do a hard reset to see if that will solve the problem.
Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
This ensures that the printer is full on and can help this situation.Follow the steps is this document to see if it will help resolve faded printing.
Missing, faded or dull colors.
Print the self-test on the printer hardware to see if it's a hardware or software problem.
You use genuine HP cartridges?
What are the ink levels?Let me know the results of the test pages of the document.
Good day!
Thank you.
Maybe you are looking for
-
Portege M400: Is it possible to use the resolution 1400 x 1050 on external monitor?
The Portege M400 SXVGA (i.e. 1400 x 1050) can support 1400 x 1050 via analog / external monitor? I ask this question because I can't do! Most importantly, he is happy to provide, even if the monitor is a TFT 1400 x 1050 screen is 1280 x 1024. I downl
-
Dear team, Recently I found the display card which gives problems, so I purchased a new Asus GT730 card 2 GB display. In the start screen, it displays only HP logo, beep, wait a while... .single beep new... wait... .single don't beep... no display on
-
Satellite A200 recovery does not work properly
Hello. After making a few changes in the partition settings (when installing Ubuntu) Vista does not load (after the loading screen appears a black screen and nothing happens). I changed the Vista partition only by expanding its size.I try to reinstal
-
Locations of Port PCMCIA improved Replicator PA2711U-YX Cardbus (32 Bit)?
I have an old Satellite Pro 430CDT notebook and want to improve it with a USB PCMCIA card.The laptops specs say that the PA2711U-X Port Replicator supports 32-bit Cardbus Slots.PA2711U-YX port replicator is it supports too? Thank you in advance for y
-
I can not install an update error code 646 (KB976321), he keeps failing.
I tried everything suggested my screen help and without success. Help, please...