All-in-one HP Office Pro 8610: black vertical line on the scans

Similar Questions

• All-in-one HP Officejet Pro L6580 is skip lines

  With the Test Page to the printer or document page, my all-in-one HP Officejet Pro L6580 is now skip lines.
  * original title - move printer head *.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  and look for a manual too

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• OfficeJet pro 8600 black vertical lines of print when copying

  I got a new of OfficeJet Pro 8600 a couple of weeks, and it worked fine until today, when I tried to copy something. I can always print from my pc and scan without problem, but when I try to copy a document (if I load it into the tray or put it on the scanner) the page comes out covered with black vertical lines of different sizes. It seems that this isn't the ink or the scanner since I can print from my pc and analysis very well.

  Help, please!

  This unit is plugged into a wall outlet directly? If this isn't the case, then try to connect the unit to a wall outlet directly.

  The 8600 Officejet Pro has built in the surge protector and double this feature may cause some problems.

  Also, try to reset the printer hard:
  * Unplug the unit while the printer is on
  Disconnect the other end of the power cable from the wall socket direct
  * Wait 30 seconds
  * Plug the unit to the top

  Let me know if it helps.

• I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the

  I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?

  Best report:

  Without thread - OK

  Functions without wire - OK

  Network name (SSID) has been found - OK

  Security - OK

  Print settings are OK with the settings of the router - OK

  Unfiltered - NOT OKand then it stops!

  Connection - do not run.

  Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.

• Help with e-all-in-one printer Officejet Pro 8610

  I just bought a HP Officejet Pro 8610 e-all-in-one printer.

  To my surprise, the paper tray can't handle legal-size paper - only format letter!  Do I need to buy a special paper for legal size tray?  Where?

  Although the printer has a USB port in the back (the so-called port USB Standard-B), it came not with a USB cable.  Is this normal?  I remember on previous purchases of HP printers they came with an extension cable USB with on one side a record Standard-A and Standard-B one at the other end.  Should I complain with HP?  To whom?

  Hello

  1 no, you don't need a different sandbox, plesae take off all the papers and you can see a diagram of how to measure the status bar,

  2. No, many printers now do not come with USB cables. I believe that HP provides that USB cables for printers sold in the AP region (Asia Pacific).

  Kind regards.

• OfficeJet pro 8610 all-in-one: Hp officejet Pro 8610 Installation on windows 10 use mode windows 7...

  I couldn't install the software of my officejet pro 8610 on 3 of my computers portable windows 10.  I contacted HP support, and we have tried to install the software nothing works.  I went to the 2nd level and they have worked trying to activate the printer as well.  I was told that the drivers are all or nothing on windows 10 systems.  I have tried to install from above and on the printer is known for the 192.168.1.172 network, but when I try the wireless installation, he never finds the printer.

  Today, I ran the exec to install in windows 7 compatibility modeand it is installed.

  I went to the directory where the installation files.  In my case

  program files, HP, HP officejet pro 8610, Bin, DeviceSetupLauncher.exe... You click with the right button, selected properties, click the Compatibility tab, activated windows 7, applied and then double click on the exe to DeviceSetupLauncher.  He was out of the race.

  It worked for me, hope this helps someone else.

  Hi @newmktgolf,

  Thanks a lot for sharing this information. I'm sure it will be very valuable for all users who have Windows 10 and are experiencing problems installing the software of the printer.

  Have a wonderful day!

• C310 printer all-in-one... reloaded software but can not find the SCAN function

  HP Photosmart prem c310 with OS X 10.8.4.     The scan function has stopped working.  I removed the software and begin by downloading the all-in-one driver software on the HP site.  To install it without problem, but the pilot for the sweep feature that used to have an icon at the bottom of my MAC, did not reappear.  I don't find it or it does not exist.  I can't use the SCAN function without going through the application of screenshot on my MAC and I love how that works... its not as clean and user friendly than the driver of HP scanning function.  How to make it work again?

  Hello

  Launch installation once more, don't forget to check the recommended software HP during the installation:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-111986-1&cc=us&DLC=en&LC=en&

  OS = 4142 & product = 4231205 & sw_lang =

  Once you are done go to Applications > Hewlett-Packard and open the HP scanning application.

  Shlomi

• Satellite Pro A210 - repeat vertical lines on the screen

  I hope someone can help me.

  I am a teacher and was bought by my school a Toshiba Satellite Pro A210 for me to do my school work and connect to a SMART board to teach with. Throughout its probably one of the best laptops I got through school. I got it two months.

  There is only one problem with it. Its developed a rather weird problem. Occasionally, the screen suddenly freezes, and the display will be replaced by thin, alternating vertical black and white lines. The only way to get rid of them is to turn off the laptop and restart it (particularly annoying when it happened in the middle of a lesson when I've been respected by an OFSTEd Inspector!)

  Technician computer school has no idea what is the cause. I was wondering if someone here might have some advice.

  Thanks in advance.

  I ve the same laptop but I didn t receive similar lines on the screen.
  What you could do is update the BIOS and the driver (if possible) display.

  If the same problem happens again, you must connect an external monitor to the laptop.

  Then check if the same lines appears on the external display. If so, then a problem of graphics card might be possible!

• HP Officejet Pro 8600 more black vertical line when copy or scan

  HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page

  Hi Clementstl,

  I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.

  I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect

  Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.

  Hope this helps, have a nice day!

• HP Officejet Pro 8600 N911a - vertical line using ADF

  I have a problem with a black vertical line on the right side of scans/copies when I use the ADF. There is no problem if I use the Board.

  There are a number of similar messages here and I tried all the solutions I could find including:

  Cleaining each wheel and sproket I can find (several times)

  Clean the glass (several times)

  Unplug the printer on, several minutes of waiting and reconnection (several times)

  Unplug the unit as described above and by using a different wall outlet with any other equipment on the line

  The pilot of uninstalling and reinstalling

  Update the firmware to the lates version (March 21, 2013)

  None of this works and I get the result below.  The one you have any other ideas?

  .

  When you clean the glass, you did clean the small strip of glass on the left and the thin white on the top lid?  These are the sections of the scanner glass used by the ADF.

  If so, then I have some information for a factory reset in the Officejet Pro 8600.  I will send this information to you in a private message.  Please read Bob_Headrick wire on the printer reset, found here, before you perform these steps.

• HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL IN ONE HP OFFICEJET PRO L7780?

  I DO NOT PRINT A LOT AND I HAVE TWO PRINTERS. THE EXPIRATION DATE ON THE CARTRIDGE, THE PRINTER DOSE NOT LET ME PRINT. I KNOW THAT THERE IS WAY TO OVERRIDE THIS PROBLEM, BECAUSE ON MY PREVIOUS PRINTER THEY REPLACES THE KEY.

  The error message itself will remain but will continue to print. This message will remain until the cartridge is replaced. Substitution is the printer printing always regardless of the error message on the display screen.

• Can I print a Fax from my all-in-one HP Laser Pro M1217nfw newspaper

  Is it possible to print sent & FAX logs from my all-in-one HP Laser Pro M1217nfw?

  Hi mb_pe,

  Yes, follow the steps below.

  1. press the button on the key

  2. arrow to the right reports and press Ok

  3. right to Fax reports and choose the report you want to print

• HP Officejet Pro more than 8600: HP Officejet Pro 8600 more black vertical line when copy or scan with automatic feeding

  HP Officejet Pro 8600 more black vertical line when copying or scanning using auto flow only.  It works very well on the flat.

  It is now resolved.  It seems that there is a strip of glass that is used for the automatic copy of power and research.  The glass has a note on it that I cleaned which solved my problem of vertical line.

• Unable to print on hp psc 1350 all-in-one of imac (os 10.6.8) but capable of scanning

  Unable to print on HP psc 1350 all-in-one of iMac (OS 10.6.8) but capable of scanning; also able to print other printers connected to the same computer.  The printer is connected directly via the USB port and I downloaded and installed software for printing on Mac using OS 10.6.  Shows the impression that labour is on hold whatever program originating the print job.  The State of the 'mistake' poster print job, but there is no information about error numbers or other details of the error. The correct printer is selected by default and layout is correct.  The printer has been disconnected, turned off and restarted and the computer has been restarted several times.  Able to print/scan/to 1350 PSC all-in-one of older Mac laptop (OS 10.5.8).

  Additional suggestions are sincerely appreciated.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• DeskJet 3835: Black vertical lines when scanning - Deskjet 3835

  Hello

  Whenever I scan using the document feeder, there are black vertical lines showing on the picture. This happens with the dish however. The printer is the 3835 Deskjet all in one set. Receive your answer. Thank you.

  The lines that you describe would generally caused by a small file specifications (or some spec) on the thin glass to the left of the bed main scanner.  Open the scanner cover and clean the thin glass.  It can help to shine a bright light which is held at a slight angle to the bed of the front.  This would be to highlight the areas to be cleaned.