all in one photosmart wireless

Similar Questions

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• HP C3100 All - In - One Photosmart: very old printer and drivers

  I know that probably the answer to this already, but here goes anyway. I have an old printer. HP all-in-One Photosmart C3100. He has just shot ten years old. I had some time after 2006, or at the least, it is the date indicated on the manual.  I just got a new computer to replace my computer that was about as old. I climbed up from XP to Windows 7.

  My printer, which works great, needs a driver and HP does not seem to do more. On their website, they say nothing more than ten years. I have no chance or is there anything else I can do?

  Thank you.

  Here is your support page.

  http://support.HP.com/us-en/product/HP-Photosmart-C3100-all-in-one-printer-series/1146511/drivers

  Click here to find your exact model number and check for the drivers and the software Win 7.

• Alles all-in-one Photosmart C7288: Canoe more scan on my alles all-in-one Photosmart C7288

  When I swichted above 7 window tot 10 window, I lost my ability to scan from my printer. While a 7200 inctjet

  the stil printer prints documents but I can't scan my documents more.

  I used the updated software for my printer. In the installation, the system asked for a cd

  This one, I have more someone can send me a cd or someone has another solution.

  Thank you

  Hey @SNAJ,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of the all-in-one Photosmart C7288 printer after upgrade to Windows 10. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, uninstall all software associated with the printer to your PC. Finally, download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you are able to scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• can not install the software for all in one photosmart 2610xi of disc of windows 7 pc

  I can't install the software for all in one photosmart 2610xi of disc of windows 7 pc.  Goes so far then stops and says cannot use the command "run as".  I am the administrator and logged as such.  I would like to use the software provided with to send faxes and others.  I can use the printer since the buttons on the printer and it prints from all programs... I just wanted to use this software.  Any suggestions?

  Thank you

  Hello

  The installation disk supplied with the printer is not compatible with Windows 7, as the device was manufactured prior to release of Windows 7.
  No matter which compatible OS are registered on the CD...

  A newer version of the software for Windows 7 can be downloaded from the HP site.

  Before installing the software, be sure to follow the steps below:

  1. Enter the control panel > devices and printers.
  2. Right-click on the icon Photosmart 2610 and lick to withdraw an instrument.
  3. Disconnect the USB cable between the printer and restart your PC.
  4. Follow the below installation, do not connect USB until prompted to do so during the installation of the software:
     http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76831-1&cc=us&DLC=en&LC=en&OS=4062&product=421134&sw_lang=

  Kind regards

  Shlomi

• How or where to get them or buy the original CD for printer all-in-one Photosmart C7280

  My installation CD original for printer all-in-one Photosmart C7280 lost in the transition. Unfortunately now I have to reinstall the software, but the installation file downloaded refuses to install advanced features by asking to insert the original CD.

  Now where can you get such a CD.

  Thanks in advance.

  Shlomo [personal information]

  You can download or order a copy at this link.

• Printer all-in-one Photosmart D110: think there paper jams

  Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

  There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

  So I'll send more information via the Inbox of (private) messages.

• All-in-one Photosmart C310a: problem printing photosmart all-in-one C310a black ink

  Printer all-in-one Photosmart C310 just quit printing black ink cartridge.  I followed all the suggestions on help/support pages, including cleaning the contacts on the cartridge and print head (I do not soak the print head); making sure that nothing has been blocked; Unplug the printer for the moment came and reset; put in a new ink cartridge (the printer when it stopped printing in black, was still full of 1/3 to 1/2, according to the levels shown on the printer).

  It prints than a very altered, unreadable copy.

  I had this same problem about a year ago and find a solution on this web site, but cannot find anything about it now except for cleaning the heads, reset or to install a new cartridge.

  I tried to access this particular response from my old e-mail, but it is not related to whatever it is that has tackled the problem last year.  I desperately need this printer going again, please help.

  Thanks for CAhpUSER respondent

  I didn't really picture for help, but I will do my best to clarify what I can! This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer is some visuals that will make things clear with my explanation below!

  The part you are diving into the water is the ink nozzles. When the instructions say do not touch the ink nozzles, that means with the fingers/hands. It says to make sure that you use a fluffy towel/no paper to wipe the print head, so don't put fats from your contact with her skin. The electrical contacts are the part of the print faces head that looks like the back of the printer, just in some places grouped copper.

  I hope this helps clear things upwards a bit for you

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday

• Photosmart C6280: Wireless connection Option is missing from the installation all-in-one Photosmart C6280 on Windows 10

  When I was installing the complete drivers for my old C6280 Photosmart all-in-one on my new laptop Windows 10, I arrived at the place where it asks what type of connection, I have between my computer and my camera.  It provides USB and wired Ethernet in option, but there is no available wireless option, although when I click on 'Help' the third option consists of the description.  With my old laptop, I was able with print and scan wireless, so I expect to be able to do the same thing on my new laptop.  All the buttons on the installation software were grey, including the 'Back' and 'Cancel', until I made a choice, so I clicked on wired Ethernet, and buttons 'connect a printer later', hoping the third option would be there when I went to the desktop application 'Add a device' later.  No chance!

  Connect the printer via an Ethernet cable to your router and follow the installation instructions.

• PhotoSmart 6510 E: all-in-one Photosmart 6510 series is no longer able to connect

  I have recently inherited this printer and eventually got it working a few days ago. Now, I'm more able to print wireless from my computer.  My computer recognizes the printer and I have the ability to print with it, but for some reason any, he says: my printer does not respond when you try to print wireless from my computer. I can print by sending documents to the e-mail address of my printer, however. WiFi is configured and works according to the configuration page I printed.

  Any thoughts?

  Hey @reyn5013,

  Welcome to the Forum from HP Support.

  I understand that you are unable to print from Mac with your HP 6510 Photosmart e-all-in-one printer. I would like to help.

  I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• all-in-one photosmart B110a: windows 10 and b110a

  I had my B110 series all in one printer works fine for over a year, then I updated to Windows 10 and he stopped scanning. So I tried to remove and reinstall all the HP programs, tried to hook up with cable (as well as wireless), tried Hp trouble shooters and doctors and no matter what I do, the printer setup will crash towards the end of the process and say "fatal error" and "MSI.netdevicemanager40". Someone please help.

  Hello @Jenecessary,

  Welcome to the Forums of HP Support! I see that you have recently upgraded to Windows 10 operating system and you stumbled upon a matter of scanning with your HP Photosmart B110a. You have uninstalled the software, now, when you try to reinstall the printer, you get a MSI error message.

  Please, try disabling your firewall and running the installation to see if it allows you to install, if this does not work try a clean boot and re run the HP printer install wizard for Windows , it was created to help Windows 7, Windows 8, Windows 8.1 and 10 users to download and install the latest and most appropriate HP software solution for their HP printer.

  If you still run into installation errors, continue here: a "Fatal Error" (error MSI) is displayed on the computer while installing the HP Windows software

  Please let me know the results, I'll watch for your reply.

  Thank you

• Get the message of incoming call on HP 7520 all-in-one Photosmart

  I had a professional hook up my HP Photosmart 7520 wireless all in one.  I have a special ringtone that is put in place for faxes and also

  I get phone calls on this line. Everything works fine, but lately I've noticed when I get a phone call

  a message appears on the screen of the printer saying incoming call Auto answer on ignore or accept. I also get this messge

  for incoming faxes. If you do not click on ignore or accept that everything works well. You will get your phone call and also the

  Fax will print. I do not know if this message appeared on the screen of the printer or I'm just noticing.

  I think I started to get this message calls and faxes. Can someone tell me if this message should always

  appear when you get an incoming call or a fax or is there a setting I need to change to get rid of the message? The message really is not hurt anything if you pretend it isn't there, for incoming call example, message, leave it alone and pick up phone and all is well. The same thing with the fax. I have a distinctive ring of a fax, a double ring, but the message remains displayed "call auto answer incoming on ignore or Accept." If you do not click on ignore or accept the fax starts printing and the message disappears.  I swear I've never seen this message before.  Can anyone share any light

  on this subject? I don't know if I make a mountain out of a hill of the mole, because everything still works, but I

  never remember just to see this message on the printer display screen before and I would like to know if it comes from an update, or if I've accidentally changed something, or if it was always like that and I just noticed. Please, if anyone can shed some light on this, I would be grateful, because I really think that this message has begun to appear even if everything seems to be in working condition. All answers would be appreciated. I know I'm old, but I hope I don't get senile no also. The only thing that has happened between the time wherever I noticed this message is I needed a Java Update and I got a fake virus. This was my tech support-assisted and supported.

  Thank you in advance.

  Hi go_pens,

  Your printer has a feature that allows automatic updates. There was actually a patch last week or the week before for this printer. These updates to the firmware of the printer. I think that your mind is still intack, I believe, you're not senile.

  I don't think the message appeared on the printer before, I guess you're right, and that the update made this change. In addition to the automatic response accepting faxes for you, you now have the possibility to accept or ignore the fax before that the automatic response accepts the fax.

  I hope that this addresses and solves your request! Thanks for joining the HP Forums. If there is anything else, we can help do not hesitate to ask.

• Printer all-in-one Photosmart 7525

  I recently bought a Photosmart all-in-One Printer 7525 and everything seems to be connected and I test pass reports a couple of times, but the printer does not connect for incoming fax calls and fax is the call and is supposed to be supported after 3 rings but does not activate. There is a digital one button the screen press if you want to accept the incoming fax, but if I'm not next to the fax, the incoming fax communication is lost.

  I have people com [ways they can't send me faxes.

  Any suggestions... has only two weeks.

  George, you helped me solve the problem I had with my printer. After I downloaded the software from your Web site, not on the CD, it took some time to download the software and when I tried to reach you, you were gone. In any case, I very much appreciate your patience and help to solve the problem and I was able to connect wirelessly with my desktop and laptop.

  Thank you very much

• C7280 all-in-One connected wireless to modem-router needs a password when it is fed - up.

  Do you have examples of wireless connection to a HP Photosmart C7280-all-in-one to a network managed by a modem-router method NB6Plus4W? The modem-router attach also your desktop of Windows XP by using an ethernet cable and a laptop computer to Windows XP wireless using the default (wireless) SSID and password (a1b2c3d4e5).

  The wireless connection between the modem and router and the laptop happens automatically when the modem-router and laptop computer are powered.

  The wireless connection between the modem-router and the HP Photosmart camera does not automatically. When I put power on the HP Photosmart camera, I then use the setup on the Photosmart button and type manually in to the Photosmart (a1b2c3d4e5) password. The SSID also displays wireless, it doesn't have to be retyped.

  Do you know if there is no method or HP configuration that will result in the automatic installation of the camera HP Photosmart to occur when it is powered?

  What I am complaining about is having to manually type in the HP to HP password whenever the HP is powered.

  Go to Setup > network > advanced settings > IP settings and now select Auto and press OK. See if this stops the question.

  If that doesn't work, then go to settings > network > restore default settings of the network, and then run the Wireless Setup Wizard to connect to the network.