all printers dashed after systemupdate
After a recent update 10.11.2 all my printers have been removed. I contacted support and they said that they had removed all printers which are no longer supported. I checked with brother, but they offer only support for OSX 10.10 so far. Is there a work around? All my printers used to work well until this update (it has even removed my uniprint). I'd have to buy a new printer because of a software failure. Can I still downgrade my system?
In many cases, you are able to install a driver created for an earlier version of Mac OS X on 10.11. So have you tried to install the driver Brother 10.10?
Tags: Mac OS & System Software
Similar Questions
-
Original title: 'RedMon Redirection Port Monitor': pray, harming this pose to my pc?
I recently tried to download a free pdf creator, after which I noticed "RedMon Redirection Port Monitor in my program Menu. I'm exhausted trying to delete it, and yet I get this response: "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port. I need help to deal with this, as I suspect that the Redmon may pose harm to my pc
Hello Apollo,
Welcome to the Microsoft community where you can find all the answers related to windows.
According to the description, it seems that you are having problems with uninstall Redmon as it gives the error message "monitor has not been deleted. The PDFLitePort provided by the monitor is still used. "Unplug all printers on this port, and then delete this port.
Perform the steps in the link to uninstall Redmon.
http://pages.cs.wisc.edu/~ghost/RedMon/en/redmon19.htm#39
Answer to us if you are having problems with Redmon or any other issue of Windows, and I'd be happy to help you.
Good day!
Hope this information helps.
-
I went to the Services page and started the spool to the printer and restarted (tried several times) and he still has the same error. Each time I reload all printers (local and network) will be displayed in the printers and peripheral area, but it will not print. When I reboot all printers will be again disappeared except two local USB printers (all are compatible Vista) and I still cannot print any printer or solution I tried.
- not able to print
- printer spool does not (started but Windows 7 think we turn it off)
- Printer HP Laserjet 3300 unrecognized
- I rebooted several times with no lick
- Printers have disappeared each time computer starts then reappear but are not
- Just downloaded the latest drivers and tried to install, but Windows 7 printer spool does not work
- Called support of Windows 7 and I was told I had to pay $299 to speak with anyone
- I went out tonight and bought a plan on the purchase of Mac for the entire company after another failure of Microsoft:(et 2900 $ sur Macbook Pro)
Check your antivirus App disable to test the print functions. If this works, you need better virus protection.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
error code cooD11BA... lost all my audio after I used the recovery disc 4
I lost all my audio after using the recovery disc (4). COOD11BA error code
Hi fluffy444,
Step 1: We recommend first to install the sound card driver and check the result.
a. check the sound card manufacturer or system to download the driver.
b. Once you have downloaded the correct driver for your windows, install successfully.
c. restart the computer and check the result.Step 2: If the problem persists, try running the troubleshooter from his Microsoft and check the result
a. see How to fix the sound problems in Windows XP
b. click Microsoft hotfix and run the tool successfully.
c. follow the instructions on the tool and check the result.See also: Troubleshooting Audio in Windows
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Icannot reinstall my officejet hp all-in-one, after upgraded to explore 8__
Icannot reinstall my officejet hp all-in-one, after upgraded to explorer 8
Hello Ratshell,
Thank you for your message. To clarify, when you say that you cannot install your printer, you are not able to download the driver, or you are not able to load the driver after download? If you try to install the driver from the CD supplied with your printer, try to download the driver from the HP site and installing once you have downloaded. Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
My entries all have ".contact" after the names in Windows Contact
display Contact Title: original Windows
My entries all have ".contact" after the names. I don't remember how or when it happened. How should I do?
Thank you.Hi JohnMekrut,
Change the display of contacts
(a) open Windows Contacts by clicking on the Start button, and then clicking your user name. Type of contacts in the address bar and press enter.
(b) double click on the contact for which you want to change.
(c) in the Properties of Contact:
box d) click on the arrow pointing downwards at the end of the full name .
(e) now you can find options to change the display of Contacts .
-
I need to re - installs all the software after the upgrade to windows 10 Windows 7? Should I backup my data?
Hello
without wise normal all your settings and data must be retained.
However its always recommended to make a backup of all your important files.
-
(Bible Library 7) program has worked on this PC when I installed it all first. After that a few updates have been installed on around 18/05/12 it has not worked. I uninstalled at least 3 times now and it won't work says incompatible application. Another thing I did was select run as personal button I think I've done worse. I don't know how to deselect or cancel that. It is to select pack 2 for XP, it does not work. I don't see Windows 7 in the list of compatlble.
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
If you are running Windows 7, then you don't benefit from this solution in the list Compatibility Mode as the Mode by default when nothing else is checked.
What is your program? If so, take a look around the site for technical assistance. What's the story with the tab 'Locked' on this site?
http://www.biblelibrary.com/4.html
This allows to cancel all the settings you can do on the Compatibility Mode.
Windows 7 - Compatibility Mode
http://www.SevenForums.com/tutorials/316-compatibility-mode.htmlYour program works in Mode safe mode, or through the clean boot procedure?
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeHow to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135Have you tried to test with another Windows user?
-
Lightroom CC print 2 copies of images for all printers
How can I get lightroom to print 1 copy of the image. The number of copies is set to 1, but lightroom prints 1 copies to all printers.
Jim and Joe,
First of all, the printer driver (s) is both set to 1 copy. I use a Brother 8510DN BW laser printer and a laser Xerox Phaser 8560 color printer. Prints to the Brother printer has suddenly started print 1 copy per image. Also, if I select the ' print' button in the LR print module, it prints two copies. However, if I select the "Printer" button and click ok it prints a copy without selecting print at all. I think I can work with that. Thanks for your help.
Jim Hickman
-
Background image of a slide that appear in all the slides after and I can't remove it
Hello
I am changing a course created with Captivate 5, Captivate 7 and for some reason any background image slide 35 appeared in all the slides after one and I can not remove. The most interesting thing is that when you look at the film slides, they are different (like the original) than on the workspace that contains the background image, I'm trying to delete (screenshot below).
Ideas or comments?
Thank you.
You can check the accordion of Timing (not visible on the screenshot)? There may be value to display for the rest of the project?
Or is the image on the master slide used for other slides?
-
All VM disappears after reboot
I installed the update of ESXi4 1 208167 and licensed with the free license. Today I wanted to reboot the host, so I suspended my 3 guests and rebooted. Reboot no guests were visible in the vSphere Client.
With the activated free license key, I have been unable to re - register the guests. I get the error
Fault:
SOAP fault:
-
Error string: error. RestrictedVersion.summary
Lack of details: RestrictedVersionFault
With the trial by default ("no license key") license, I was able to save the guests. Fortunately, I still have until April to straighten out this mess.
My question: is this normal/expected behavior - as in, can I really expect to lose ALL my guests after a reboot of the ESXI4 host with the free license?
Not at all. You will need to add your virtual machines to the inventory (they really should not have disappeared, so I doubt that a reboot has occurred). Try to click the ESX, go to the Configuration tab, clicking on the storage option. Right-click your local data store, and the virtual computer records must be there. Enter each and righ click the VMX file for each virtual machine and add it to the inventory.
The fact that they disappear is something you'll have to study. In addition, VMs must be powered off/shutted down for ESX restart/stop, do not pause.
Marcelo Soares
VMWare Certified Professional 310/410
Technical Support Engineer
Globant Argentina
Review the allocation of points for "useful" or "right" answers.
-
All the columns after first column null/white
Database: 10.2.0.1
OS: Windows xp
I need your help in the future. I have a table whose columns varchar2 20. Table looks something like this:
Power required (all columns after first null/white column for a given row)------------------------------------------------------------------------------------------------------------------------------------------------------------- Col1 Col2 Col3 Col4 Col5 Col6...Col20 ------------------------------------------------------------------------------------------------------------------------------------------------------------- In some operating systems, you can use a character in place of HOST such as "$" in Windows. On some platforms, SQL*Plus removes the SQLTERMINATOR (a semicolon by default) before the HOST command A workaround for this
I'm sorry, I'm not having the machine in this moment, which is why I'm not necessary validation create table and SAMPLES.Output On some platforms, A workaround for this
I hope I'm clear in my question.
Thank you.Hello
Assuming that you know a few suibstring who never appears in the data, you can get all the columns after the first NULL like this:
SELECT REPLACE ( REGEXP_SUBSTR ( '/' || col1 || '/' || col2 || '/' || col3 || ... '/' || col20 || , '//.*' ) , '/' -- , ' ' ) FROM table_x ;
As indicated, this returns the concatenated text, without any delimiter.
If you want the delimiter, omit to REPLACE them; Just use REGEXP_SUBSTR.
If you want a delimiter which may appear in the text, then a comment the argument 3 to REPLACE. -
I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer. I tried to download the software updates, but nothing seems to work. Any suggestions
I see that you both scan problems after upgrade to Windows 10, and I may be able to help.
Most of the products have updated software available on the HP support Web site for Windows 10.
I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.
HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.
Do you know if you are able to scan using paint?
To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8
(This is the same for Windows 10, of what I said)
- Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
- Click on the painting in the results.
- Click fileand then click on from a scanner or camera.
- Select your printer, click OK, and then click Scan.
Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.
I look forward to hear from you!
Thank you
-
After IOS 10 update all Apps crash after typing a few characters
After the IOS 10 update my Iphone 5 yesterday, when you type a few characters in applications like Whatsapp, Mail, Notes, etc., all applications hang. I restarted the Iphone already on several occasions. But problem occurring.
Only when you type very, very slowly (1 character per second or more), it seems that the applications to continue to work and do not hang up.
Who has any suggestions for this problem?
Go to settings > general > reset > reset keyboard dictionary and see if that helps.
-
Firefox Sync lost all my data after 3 months of inactivity. Can I fix this?
Is this normal for Firefox Sync wipe data after a period of inactivity? Account.Services.Mozilla.org said that I use 158 KB of data. This sounds like the amount of data that a fresh firefox profile would be download Sync, or is it perhaps even my data?
Is it possible to access the logs? There is nothing in my profile weaves/logs directory.
Hi dismayy,
There is a new synchronization service that was introduced in version 29. Accounts.Firefox.com is the place to sign in. sync your bookmarks from Firefox, history, passwords, etc.However, to access the logs are the same. With respect to the loss of data, please make a local backup to back up and restore the information contained in the profiles of Firefox
- How can I activate synchronization logs:
- Talk openly about: config and turn on: services.sync.log.appender.file.logOnSuccess and services.sync.log.logger.engine.bookmarks
- Restart Firefox and look: subject: sync-log
- Logs and error messages are placed here
Please use pastebin.mozilla.org for sharring all errors that relate to this issue.
Thank you.
Maybe you are looking for
-
G560 wireless connects to other networks, but not my home network
Hello Got the 560 yesterday and set up was smooth. First thing I did was try to connect to my home wireless network, but it wouldn't connect. I checked the network password several times but it doesn't connect at all. All my other devices at home can
-
How to install windows Installer 3.1
Every time I try to download the Installer 3.1, I just get directed to the agreement of the end user, but can not accept its conditions, or download the program. What should I do?
-
Spooler subsystem app has encountersd a problem and needs close__
Spooler subsystem has encountered a problem and needs to close
-
After updating the latest firmware, Windows Media Player tells me that my camera will not play music of the subscription. Anyone has any advice?
-
printer model hp psc 1315xi printer all in one
yesterday downloaded from ms drivers of Web site to windows vista Home premium. everything works except "Hp Solution Center" click the icon and the message says "will now close"how to fix it? ".