All USB 2.0 ports had ceased to work on the Satellite P750-135

Similar Questions

• After hybernation, all usb and wifi mobile devices does not work

  Original title: Hybernation question
  After hybernation, all usb and wifi mobile devices does not work. Similarly, it is not stop as well. I turn off the power to the network option all usb hubs. Problem however still closes. Please suggest. I have Windows XP Sp3 installed. All the drivers and the windows update is up to date.

  Hi Mirza.Shanawazbaig,

  1. what happens when you connect any USB device to the computer, or trying to shut down the computer after hibernation?

  2. do you have security software installed on the computer?

  3. did you of recent changes on the computer?

  4 when was the last time it was working fine?

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

  http://support.Microsoft.com/kb/871233

  Method 2

  I suggest that you download and install the updated driver for the network adapters and display on the computer by visiting the card manufacturer or computer manufacturer website manually.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• USB ports have stopped working on the Satellite C

  Hello. Just turned on my laptop and found that the USB ports hafe has stopped working. No mouse and no external storage. Any ideas?

  What USB port status is visible in Device Manager?
  Are no yellow exclamation point visible?

  Expanded the USB hubs and region of controller and remove all the listed USB ports / controllers from the list of devices.
  After that, restart the device.

  The system should reboot and the USB ports should be recognized and installed automatically.

  Try this workaround short and report results.

• Corsair Flash Voyager GT 32 GB USB 3.0 thumb drive does not work after the upgrade to Windows 8 Pro

  Hello

  Since the upgrade of my Windows 7 Ultimate SP1 x 64 Windows 8 Pro x 64, my Corsair travel GT 32 GB USB 3.0 Flash USB key no longer works when plug it into my USB 3.0 port on my laptop. I get an error that the "peripheral last USB connected to the computer has malfunctioned and Windows does not recognize it." I looked for someone with a similar problem and came across this answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/Sony-microvault-USB-30-8gb-thumb-drive-not-working/8815a9bd-ee62-41EC-8116-a2a03d6f2bbf

  I tried the solution (method 1) on this page, however, Windows reports that it was unable to solve the problem of equipment.

  Is there anything else I can try to solve this problem? The USB key works in the USB ports 2.0, and it worked in the USB 3.0 port when you run Windows 7 Ultimate SP1 x 64.

  Kind regards

  Andreas Ball

  Hey, I contacted Corsair about this, and they say that it's a driver problem in Windows 8 and I need contact my laptop computer manufacturer for the latest drivers for it, but even if my manufactuer are full steam advertising upgrades of Windows 8, they say they do not support it fully yet...

  The host controller my laptop use of USB 3.0 is 'Renesas Electronics USB 3.0 Host Controller'.

  Through Googling, I noticed others have had problems with this host controller in Windows 8, and I can't seem to find a solution for it yet.

  Unfortunately, windows 8 compatibility is not listed then try to install the installer of renesas usb 3.0 in windows compatibility mode 7.

  complete list of supported products and the operating system:

  http://eSupport.Sony.com/us/p/SWU-matrix.pl?upd_id=6382

  Renesas Electronics USB 3.0 Host Controller®
  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=VPCL213FXB&upd_id=6382&os_group_id=6

  Download here: http://s02.download.sony.com/US/pc/RNDUSB-00241028-0042.EXE

  What does this do?

  This utility installs the originally shipped version of Renesas Electronics USB 3.0 Host Controller driver.

  This driver also solves the yellow exclamation point error that can appear in the device as "Universal Serial Bus (USB) Controller" Manager that indicates that the driver is not installed for this device.

  The products and operating systems (view all...)
  Model:
  VPCL213FX/B
  Operating system:
  Windows® 7 64-bit

  IMPORTANT: This file is only for use with the identified models. Not all models are sold in all countries.

  Important notes

  During the installation of this file, be sure that you logged in as an administrator or as a user with administrative rights. To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. It is strongly recommended that you print these instructions for reference during the installation process.

  Download and Installation Instructions

  To ensure that no other program interferes with the installation, save any work and close all other programs. The taskbar must be clear of applications before proceeding. Download RNDUSB-00241028-0042. EXE a temporary of the file or download directory (Please note this directory for reference). Go to the directory where the file was downloaded, and then double-click RNDUSB-00241028-0042. EXE file to start the installation. The "User Account Control" screen, click 'yes '. On the screen "Select Country", select the country for the installation and then click on "next". To the "Renesas Electronics USB 3.0 Host Controller version 2.0.26.0" screen, click "next". The "License" dialog box, read the contract, then, if you agree, click "I agree" to continue the installation. The "Complete" screen, click on "Finish". Installation of the Renesas Electronics USB 3.0 host controller is complete.

• Text your ceased to work on the iPhone 6.

  I have a tone custom for text messages I've had for several years. It suddenly stopped working and I cannot understand why. The strange thing is that it works normally in iTunes on my computer and it is synced on my phone. In fact, other custom text tones are still working as usual. It's just what I've always used. Can anyone work why this might happen?

  When I go into the settings in the tones, I can type others and they play but the one I've always used is silent when I press on it. I fist he discovered when I found text messages in waiting for me but never heard of the alert. When I go to that tone in iTunes on my computer, it plays as usual. He made me very puzzled. It's a great tone and I don't want to lose him.

  Hello marc-leon.

  Thank you for using communities Support from Apple. I know have a problem with a tone alert on your iPhone, it's not what you expect. If I understand correctly, you may not use or play a ringtone on your iPhone that worked in the past, and the same file in iTunes still works. Good news is that you should be able to use iTunes to fix this.

  First, connect your iPhone to iTunes on your computer. Then use the synchronization options to remove this alert sounds on your iPhone by unchecking the box next to it. Click on the button apply, then confirm that the tone is deleted from your iPhone once the synchronization is complete. Once the tone is removed then it re - sync from iTunes on your iPhone and try it again on your iPhone.

  Sync your iPhone, iPad or iPod touch with iTunes on your computer through a USB port

  See you soon!

• USB 2.0 should work on the Satellite 2410-303?

  Recently, I have re-installed XP on my Satellite and think I have all the latest drivers installed now - including drivers from the chipset of this site.

  When I plug a USB device, I get a message saying that this device can run faster, so her acting as a USB 1.1 port.

  Anyone know how I can get USB 2.0 to work? Or maybe he is not supported by this old Satellite?

  Hello

  I checked the specs on the Toshiba site and searched a little bit using Google and it seems that this laptop isn't equipped with USB 2.0. This means that you can only use the USB 1.1 on this laptop speed.

  I hope I could help you.

• I had to use my system disk and recovery to all disc reinstall on my Acer laptop. everything works except the sound only comes out of the speakers

  It is said that my speakers are working... but nothing comes of them. :( I was struggled with this laptop because it struck at 6 months. I sent in by Geek Squad in Best Buy, they sent and everything has been replaced inside. they gave me back with absolutely no work system. He was not able to load or anything. I've made repeatedly to get systems but they said I should go to Acer. I received the CD from the company and brought back the cds and the laptop to Geek Squad/Best Buy. The tech guy said that a fool would put a cd into a laptop computer and load it. When in reality it was really working. In recent days, I put the CD and discovered that we had finally got the right CD. Records of the system and the recovery disks, but I tried to listen to music and watch movies, but no sound. It bothers me because I tried to solve this problem for over a year. I'm hard pressed economy, and the need to understand this point before I go to College. I don't really have the money to buy another laptop.

  I really hope someone can help!

  Thank you!

  Hello

  I suggest you to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  For more information, see this link:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  It will be useful.

• All black screen with a mouse that is visible on the Satellite

  I have a toshiba satellite laptop 2 years old, and it works pretty well so far (battery replaced in July).

  Yesterday, I was using it as usual, then close the lid and went for a shower.
  20 minutes later, I came back, it works again, and he went to a black screen with a visible mouse.
  However, none of the keys produce any response and the mouse not to slam.

  I tried several times it works and stop.
  Twice he went to a white screen with all the icons of bottom bar of size reduced and grouped in the upper corner, as well as a few photos, that I had just downloaded.

  A few forums I saw answer other users have suggested using the vista disk to restart, but I'm on study abroad for a year in the United States and thus didn't drive.
  In addition, these users reported a collision until it happened.

  I'll keep on at the current time to turn off in the hope that it will come back to life after a stop appropriate through loss of power.

  I would be really grateful for any suggestions you can give me, thank you.

  Hello

  I put t know which model of laptop you have, but the first thing that you should try the new installation of the OS.
  You don t have any installation disc that's pity
  However, you can try to start Notepad using a Windows live CD.
  This system is called BartPE or WinPE
  Google for it

  This don t systems must be installed on the HARD drive, it works like a linux live cd you boot using such a disc and a few sec later you get access to the HARD disk

  I think it is good idea to check if the laptop is ok

• 2540 HP all-in-one printer print by wifi only works after the router reset every time

  Hi, I recently bought a HP2540 all-in-one printer.

  I was unable to get the printer to work via wifi after trying lots of different things, but after rebooting the router and try again, it worked perfectly.

  However, it seems that whenever I'm away from the computer (or turn printer work) it will not print. However, as soon as I restart the router again it works perfectly. I guess it's something to do with the IP reset maybe, but would be unsure how to proceed?

  Thank you

  Bret

  Hey @BrentBWood,

  Thank you for contacting HP Support of Forums!

  I understand you're having intermittent problems of wireless communication with your HP all-in-one Deskjet 2540. I want to help you resolve this issue today!
  
  Because the problem seems to be fixed after you powercycle router it certainly seems to be a problem of ports with the router itself. This does not indicate that something is not actually with the router. It simply means that the router is doing its job too well and block the printer intermittently as a threat attempts to access your network.

  For your reference, I'll provide you with the support document HP on wireless connection problems. You already have the reset of the router so don't worry too much about those, but the other steps can help solve this problem for you:

  Printer keeps no connection Wi - Fi

  If these steps don't are still not solved the problem I recommend you talk to your router manufacturer to get them to open the appropriate printer ports.

  -Incoming (UDP) Ports:

• Re: USB does not work on the Satellite A350

  I have a Satellite A350 and USB ports recognized the mouse, but no other entry. It does not recognize a USB drive or Logitech microphone or my Flip video.

  Anyone know what is happening? Thank you!

  USB controller drivers are responsible for these functions. These drivers are part of the chipset drivers. Try to reinstall/upgrade to update chipset utility:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  or

  http://www.MyToshiba.com.au/home

• Can't get webcam Chicony USB 2.0 to work on the Satellite A200

  Hi all

  I noticed that other people have posted messages asking for help on this subject. I have problems in the webcam integrated on my laptop model Satellite A200. There are no icons in what concerns this camera and I'm puzzled because the manual doesn't even mention the camera.

  There is no link in the menu all startup programs. I tried the solution suggested in the forum to add this as a USB but the phone said that there was a mistake. I'm not the person more computer in the world and I would be grateful if someone wants to be good enough to post a step by step guide on how to get this on camera. It seems to be a common problem for those of us with the A200 so it would be great if someone could help.

  Thanks in advance

  Helsfeas if you use the pre-installed Windows Vista you will be able to find the installer for your webcam chicony under the C: don't / drivers directory Toshiba which must be in your hard drive. If you run the installation program you will get an icon in your bar of tasks and on your left, follow a pop up window that can turn on your camera and put effects on it.

  If you have downgraded to WinXp please tell me if I can send you on the program, as I recorded it before the mine downgrading to XP.

  Hope I was of any help...

• Mass USB storage does not work on the Satellite a series

  When I connect any USB mass (as USB or card reader) storage, system slowly recognize it for about 5 minutes and then show a new drive letter. When I try to open it - the system is long overdue.

  I had restored an original condition of restore CD Set, but the problem is still there. Other devices, for example, USB printer, thin features.

  Hello

  What cell phone do you have exactly?
  Have you tried to update the BIOS? Compare the BIOS available on the Toshiba page with that preinstalled. If the laptop is using an older version, try update BIOS!
  But be careful! Be sure to use the updated law procedure and the good BIOS!

  How about chipset update? You check chipset and try installing the chipset from the Intel page utility!

  PS: Have you tested the devices on different PCs?

• Had to remove password on the Satellite A660-18

  Hello

  I have problem with my laptop Satellite A660-18 access, it asks for the password, I have not to remember (or know). I bought it to the United Kingdom in 2010, since it is the first time I faced this problem. Is there any possibility to get this password remotely, because I'm afraid there is no toshiba service center in a city (or), where I'm located now.

  All the advice that helps you solve this problem are much appreciated.

  Thanks in advance.

  I agree with Timox and I'm afraid there is no other way to remove the password that is unknown about contact Toshiba authorized service partner and ask this suppression of m.

• Driver for camera chicony 2.0 USB does not work with the Satellite A200

  The camera is built into the laptop. I tried to use the web camera and I can't.
  I tried to reinstall the driver but I can't find in the toshiba Web site downloads.
  There is no light in the camera, the software is ok, but I can't find the driver.

  Thank you

  I put t know what Satellite A200 series you and what OS you use, but the webcam software was already published on the European driver Toshiba page.

• Driver for Chicony USB 2.0 cam does not work on the Satellite A200

  The integrated camera driver does not properly.

  Maybe in your case! On my Satellite A200, everything works perfectly. Now I wonder what you do and how you use your laptop?