All Windows updates fail

Similar Questions

• What can be done to solve the error code 000641; all windows updates fail

  I get the error code 641 trying to update the 17 items that need to be addressed. I tried several times and the same error message. Updates are marked as critical. Demand appears in my bar for letting me know that I've updated to install tasks.

  Hello

  You did changes to the computer before the show?

  Method 1: Run the fix - it of the article mentioned below:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018/

  Method 3: Put the computer in a clean boot state, and then try to install the updates and see if that helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 4: Temporarily disable UAC and see if that helps.

  Reference:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Important:

  User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

• Windows update fails-G62-225DX - bad startup a factory?

  My nephew came to me recently with a G62-225DX HP, concerned about safety.  Given this machine is several years old (recently handed down from his father - I quickly understood why), I was surprised to see she was always being basic Windows 7 Home Premium.  Without SP1.

  My first attempt to resolve this was to run Windows Update - no luck - immediately fails with "cannot run - services is not started.  Of course, verification services, yes I see WU and BITS running.

  So, like any good tech person, I check in the case where the logs and see various errors, including the constant complaints on the Crypto database being corrupted.

  Then, up to be Googling for these symptoms/messages.  I see many people with the same problem and a lot of suggestions on how to fix this (re - reg WU, STRANDS of clear/reset, flush/empty C:\Windows\SoftwareDistribution, catroot2 flush/empty, etc.).  Even seen one on the Intel hard drive problems due to replace it with a drive of more than 500 GB (this unit still has the original 320).

  Spent hours trying all the suggestions there, especially when people said 'Yes, that fixed', nothing helps.

  Since it was not something of value on this machine, I decide backup and restore "factory".

  Imagine my surprise when, after reset of the image 'factory', it has exactly the same problem - Windows Update fails, out-of-the-box on the right!

  I think to myself, it's crazy.  The machine is faulty from the start and everyone was naïve to not get Windows updates, AT ALL!

  I even decided to try the Windows Update Checker (supposed to perform before installing SP1) and it fails with ' Windows Update Standalone install encountered and error - 0xc80000247 ".

  So, I decided to run through the suggested fixes (from M$, no less) and all of a sudden, that Windows Update works.

  I thought, it's fantastic.  He immediately calls to > 130 fixed critical.

  After a few hours of download and installed, I restart only to get a BSOD - STOP 6 b - AAARRRGGGHHHH!  Tried to go through Windows restore previous checkpoint but that too fails with a mysterious error.  In addition, many Google hits on the 6 b says that it's a hardware problem.  But he was executed until the Windows update, with nothing in the case where newspapers to indicate hardware problems.

  Then, I decided to do a restore from the image of what I started with.  At least it ran, even though she could not be updated.

  I no longer dig and see a bunch of updates to the firmware/software for this machine, including the BIOS.  Even saw some strange 'Windows updates' HP.  I thought maybe it was something like the fiasco when the power management update for Intel processors had on machines AMD, thus paralyzing them!  Still nothing - WU still does not work!

  Tried again to return to the original image, hoping that maybe to install all updates of office/hardware/driver on a virgin machine solve the problem.  Nope-WU still does not work.  Even went back through all the suggested fixed (saved as .bat files everthing).  Nothing, nada...

  So, I'm posting here in hopes that someone has a miracle cure that I missed.

  Hello:

  I don't have a magic bullet...

  The same thing happened to me while working on a friends HP 8100 Elite CMT, Windows 7 Pro, HP original image.

  Would not install SP1 or Windows updates. I tried every trick in the book and after spending more than two hours, going nowhere, including restore from the recovery discs, I decided to install a plain OS W7 clean add drivers myself using the product key for W7 on the PC.

  It has worked well.

  You can do the same thing if you can read the product key of W7 on the bottom of the laptop, and your nephew can't live without programs that was shipped with the PC.

  In addition, if you format the drive and just install W7 on current partition, you can probably find the program of the installation files for the programs supplied with the PC in the SWSetup folder.

  Here's how to do when you don't have installation of W7 media.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• Windows update failed error codes 643 and 800736B 3

  My computer trying to install updates, but fails - I checked update history and it installed OK until the 16.10.2010, the installed just a few of the UpdateA and is now not install at all. I get 643 and error codes 800736B 3. I ran the resolution of problems and he can't find any problems. I am running Windows 7, the computer was new at the beginning of last October. can you help me, please?

  Windows update fails to install with error code 800736B 3 updates

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/98573891-EEAD-4257-8bf2-1fbac3f2a96a >

• Windows Update: failed. __Code 643 windows Update encountered an unknown error. _ * AND * __I cannot repair Windows 7 with the disc either. My guess is: these issues are related...? __

  I have THREE questions which PEUVENT all be linked togther... What do you think?

  [I am slot as Windows 7 Ultimate (free upgrade to Dell PC w/purchase) on a Dell 64 bit PC XPS435]
  I've upgraded from Vista about 3 weeks ago.

  #1 - Two weeks ago I had a problem with the installation of Nero/LiquidTV-TiVo to my PC... (this is also when the problem started).
  To get the "Nero" thing figured out, I took the advice of someone on the Forum/Blog of Nero. The person has provided a lenghty explanation how to uninstall LiquidTV completely by removing the registry files... I don't really know what I'm doing in the registry, but everything that I helped my problem of Nero, but I couldn't tell you WHAT I deleted OR if I have deleted any bad subfolders or whatnot!... the next time I started my PC is when the NEW NUMBER is right.

  #2 - On my next BOOT, Windows Update has found an IMPORTANT update:

  A security update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB954430)

  .. .and it fails every time, it tries to install saying this:

  Windows Update - failed

  Code 643 Windows Update encountered an unknown error.

  "Get help with this error" provides little or no help... but it says this:
   "WindowsUpdate_00000643" "WindowsUpdate_dt000"
  
  All the research I did, the problem seems to be with Microsoft .NET Framework... .and all the solutions I found talking about it, "UNINSTALL all THE .NET FRAMEWORK & REINSTALL" ... I tried and there is no .NET Frameworks listed in Add/Remove, and when I press on ' VIEW INSTALLED UPDATES'... " on my PC it says, "no updates are installed on this computer"... what the _____?

  #3 - Today, I thought I would just pop the WINDOWS 7 installation disc and do a repair/upgrade... It will not be upgraded.
  He cycles most of the way through, then he Has STOPPED and says this:

  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task, (it lists only a SINGLE task), and then restart the upgrade to continue.

  • Windows needs to be restarted if necessary to system files can be changed before you continue.

    Does not help restart. He tried 3 times and he ends up doing the same thing.
    Is it possible I deleted something out of the register so far here and which is cause of all this?
    If so, is it possible to fix WITHOUT doing a new install of Windows 7?
    OR... anything can be a problem... Please HELP!

    (And please note: I am a first year student college with specialization in computer science... but I just started last semester, so I don't know what I should... yet. - though, I SHOULD have known better than to mess with the registry!) My bad).

    Thanks a lot for your time in advance, and I look forward to hear from you!  VikeMike4
    

  Erwan,
  You must read this entire thread and the State, if you have tried the steps listed here or that you tried to fix the problem.  Take a look at this article, because it has a solution for 643 errors: KB971187
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

  nfkgjaLRjh:KF'e; ktg; B; love my lifeE

  Hello

  Do you get any error messages? More detail of what is happening and noted that allows us to help you.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:
  
  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows update fails with error code 57 (KB951847)

  Windows update fails when it encounters an unknown error while trying to install the following:

  Microsoft. NET Framework 3.5 Service pack 1 and. NET Framework 3.5 Family Update (KB951847) x 86

  Installation date: 13/11/09
  Installation status: windows has encountered an unknown error: code 57
  Update type: important

  Recently, I made a recovery of the pc and reformatted my entire hard drive to the issuance of the plant.  Yesterday, I downloaded a standalone installer (KB947821) to see if that would help.  He did not.

  I would like to have instructions step by step on how to obtain this update to install correctly.

  Thank you

  Quote your full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) when you post in a forum or a newsgroup. Please do it in your next reply.

  ===============

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in...

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows Installer '1603' (ignore the title, if necessary)
  http://support.Microsoft.com/kb/923100

  After running the tool that is appropriate and necessary, (re) install all versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 SP1 by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 SP1, reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• Windows update fails with error Code: 0 x 80070641 and 0 x 641

  All critical updates are now not to install.  I usually get two Error Codes:

  Error code: 0x80070641Error Code: 0 x 641

  The system ask you to send me the considerable detail of Microsoft on these errors, but I don't know where these files are stored.  I think that I am submitting is done anonymously, so I've never heard anything back.  Help, please!

  Check out my answers here (http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-fails-even-after-running-fix/e1cd6c26-d1b2-4116-8c41-1c22a1d0b543). I think that I have found a workaround.

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• Windows update fails with error '... DllRegisterServer was not found... ».

  I have exactly the same problem as http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-windows-updates-error-power/f69a884d-c11c-4e9f-badd-12bafb61d091?tab=AllReplies&tm=1345292404518. The steps gave me the same exact results, as they are described by Ann l. a. at WILL. If the problem persists and I don't know what else to do. HELP PLEASE!

  Original title: Windows update fails

  The problem is solved with these steps (recommended by a microsoft technician):

  1. Click Start, all programs, accessories.
  2. Right-click on command prompt , and then click run as administrator.
  3. In the command prompt, type the following commands and press ENTER after each one.

     CD %windir%\System32
     net stop wuauserv
     net stop bits
     net stop cryptsvc
     Ren C:\Windows\SoftwareDistribution SD2
     net start wuauserv
     net start bits
     net start cryptsvc
     

  Thanks for the interest if!

• Windows Update failed - error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332)

  Original title: Windows Update Failed - need help

  Vista 32 Ultimate with all updates, until this one: update Windows failed: error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332). Update has failed repeatedly.  I tried to restart, remove the update (even by deleting the file so it would download it again) and install again.  Nothing has worked.  Error 80070643.  Since it is not Office 2003, the error seems to mean a problem with the Windows .NET framework.  Don't know what that means.

  Looking at KB976982, I tried to fix MSI software update registration corruption issues (whatever that means) by running the automated Fix It by KB971187. Restarted, I tried Windows Update again.  Still didn't update.

  Then, I waited two days and tried again.  Even that did not help.

  I tried bypassing Windows Update simply by downloading and then run the file SQLEXPR32.exe from Microsoft downloads. Did not work at all. I then tried to run it as an administrator (even if it was already an administrator account, with no other account on this computer at all).  He started to run and then gave me the following error message: unable to run the SQL Server System Configuration Checker due configulation WMI on the computer.  Error: 70347 (0x112cb).

  Now I'm really confused.  On the one hand, 80070643 means I probably repair the .NET framework, which certainly, I hate to do because I need several versions of the .NET framework first uninstall and then try to install the compmonents, and I'm afraid something would go wrong.

  On the other hand, the 70347 (0x112cb) error message seems to indicate the problem is completely different and has to do with WMI, which probably has to do with permissions and I have no idea how to solve this problem.  (And why it all of a sudden would be any problem with permissions?)  This computer is not on a corporate network and has only one user account, the administrative account).  I have looked at Services and Applications in computer management, where there are WMI control, but nothing shown that I can possibly change and not the SQL Server Configuration Manager under it, which doesn't seem to have much either.

  Help!  Please...

  And now I also tried to fix it, just in case where, the .NET framework (Panel > programs and features > Microsift.NET framework Client profile 4 > uninstall/change > fix it), and the Windows Update tried again (including reboot).  Still no.  Everything I try, it is not to do nothing, pardon my language.  People smarter than me, pleasehelp!

  Hi stupID_,

  «Error 0 x 80070643 for Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332).» Update has failed repeatedly. »

  As the error relates to SQL, perhaps this forum:

  SQL Installation of Server & upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Error Code 80072f8f: windows update fails. Outlook2010 auto config account Exchange 2013 fails 'no available encrypted connection '.

  The user's mobile final has all of a sudden a problem. Windows 7 Pro.

  Disconnects account Exchange 2013 in Outlook2010 cannot connect......

  .. Windows Update fails with error Code 80072f8f... A cert security problem?

  ----

  The user did issue out-of-the-blue (update) about self-configuring. I don't know how he responded.

  So we see that Outlook cannot connect to the Exchange Server... error codes include:

  "There is a problem with the proxy server's security certificate"

  "Outlook cannot connect to the server proxy [rackspace] mex06.emailsrvr.com".

  (Error code 080000000) »

  .. Thus, there seems to be a problem with the security on this computer certificates.

  I have no idea where to start to fix this...

  Rackspace, bravely suggested that I remove the mail profile and create a new...

  The create new e-mail account (exchange 2013) breaks down... same error...

  All hosted no more thoughts.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are getting an error code.

  I suggest you to refer to the Microsoft Help Article below and check if that helps.

  As you've found Windows Update fails with error Code 80072f8f.
  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80072F8F#1TC=Windows-7

  You can also check out the article below.

  https://social.technet.microsoft.com/Forums/office/en-US/0b7ebeab-ca31-4379-a489-16fdad34d550/intermittent-proxy-error-there-is-a-problem-with-the-proxy-servers-security-certificate-outlook?forum=exchangesvrclients

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows Update fails, laptop breaks down at the restart, Windows 7

  I had to buy a new drive hard laptop to my Toshiba Satellite after the first one stopped working. I reinstalled Windows 7 and did all the required Windows updates. So I wonder to restart, as usual, and I do. The problem is, when it gets to the point where the laptop screen goes black, and it should restart, is not. It is just a black screen, no response to the pressing movement or the key of the mouse. I know that the laptop is still technically because that light on is still green. I let him sit there for at least an hour, but nothing happened. Then I had the power button to turn off the laptop completely, he did and he turned his back. The laptop then turns and begins to set up the Windows updates, but it fails. After that I can log into the computer, and I can see that the Windows updates fails. Now, I have done this several times and sometimes the windows updates will succeed, but every time the laptop computer fails to restart correctly, and when I turn it off and turn it back on, he always tells me that Windows updates fail to configure. The last group of Windows updates I tried to do, they all failed to do.

  I just looked at the history of updates to Windows, and these are updates that failed

  Each update for Windows 7 for x 64 systems.

  Daily security for Windows 7 for x 64 EXCEPT KB3035126 systems.

  Each Microsoft .NET Framework 3.5.1 security update

  And each update Cumulative security for Internet Explorer 11

  The only consistently successful updates have been

  Update definition for Microsoft Security Essentials

  Updates and security for Microsoft Office updates

  and x 64 Windows malicious software removal tool

  My laptop is a Toshiba Satellite C655D, it runs Windows 7 Home Premium 64 - bit (6.1, Build 7601), my processor is an AMD C-50 processor 1.GHz, I got 3072 MB of RAM, and my graphics card is an AMD Radeon HD 6250 graphics card. If you need further information, I will provide it to you. Thanks in advance for any help provided. I appreciate it.

  Hello

  Disable the antivirus and install updates, see if that helps.

  Note: Please activate antivirus as soon as you check the issue.

  If the previous step fails, perform a upgrade in Place (repair install).

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  Thank you.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes