Allocate more cpu

Similar Questions

• Allocate more CPU host comments

  I have a quad core 2 socket server running VSphere 4.0.  Looking at the graphs of performance and CPU host never gets above 30% usage.

  I have a linux guest, who will give me an alarm that it max out the CPU usage.   I currently have 2 CPU assigned to this prompt.  Since I was the fresh General CPU on the host what can I do to allow more processing host at this prompt?

  Thank you

  In your case, I think that perhaps you need to add an another vcpus.

  Rgds

  Diego

• How to give a procedure more CPU than in other proceedings

  I'm running two procedures simultaneously. According to the CWA a proc takes 32% of CPU and the other proc takes 11% of CPU. The second procedure takes too long to complete. Is there a way I can allocate more CPU for the second proc so that he finishes faster?

  I can only provide a link http://docs.oracle.com/cd/E11882_01/server.112/e25494/dbrm.htm#ADMIN027 a DBA thing.

  Concerning

  Etbin

• Help resizing partition to allocate more space to the operating system

  I shared the size of my HD between OS & Windows when I partitioned.  I do not use Windows often but it's nice to have.  I would like to allocate more space to the operating system I use the low disk space.  I've seen several posts on the removal of Windows, the partition and then re-create it with the new size.  I also saw people talk about other programs to do.  What is the best way to do it without compromising the integrity of my HD?  OS X 10.10.5 - Windows 7 SP1 64 bit

  Thank you.

  The Apple-supported method is to remove Windows (Wizard BC only) and re-install Windows on a smaller Windows partition. Third-party tools come in a variety of commercial to the OpenSource and will work with varying degrees of success.

• Satellite P300-1EI (PSPCCE) - how to allocate more memory to the graphics card?

  Hello

  I have a laptop toshiba satellite P300 with this graphics card: ATI mobility radeon HD 3650.
  I want to allocate more memory for this graphics card. How could I do?

  I can't do this in my bios, I don't have this option...

  Another way?

  Hello

  Something like that is not possible because the graphics card driver it controls automatically.
  If the graphics card would need more graphics memory then the driver assigns the amount of necessary RAM automatically.

• NB300 disk partition: I can allocate more space to (c) and less (d :)

  I can reduce the volume (D :) thus creating an unallocated volume, but could not increase volume (c) of the latter.
  Is this all just impossible or would I need to use a special tool?
  In which case I can not allocate more space to (c), can I use the empty space to (d) of my own files?

  Post edited by: karinchristi: subject has been corrected

  Hello

  You can resize the partitions with Paragon partition manager, but you need to know if resize the C partition, the hard disk (F8 on starup) image recovery utility, will not be available. And 1 point, you must back up all files before partitioning, because sometimes it can be wrong and you cannot start Windows.

• SQLSERV. EXC uses more cpu I have one of my production sql server 2008R2 Server

  Hi all

  I am faced with a critical situation question in one of the servers.sqlserv.exc of production uses more CPU (from 90 to 100%)

  Windows version chargeWindows server 2007 standard with SP1
  Processor: Intel (R) CPU Xeon X 5675 @3. 07 GHz, 2.93 GHz
  RAM: 4.00 GB
  System type: 32-bit operating system.

  SQL server version and edition: SQL Server 2008R2 standard 32-bit edition with sp1.

  Please let me know what are the step that I have to take to solve the problem and I would like to know which process is eating more resources.

  Kind regards
  Mahi

  Hello

  Your question is better suited to one of the forums of SQL on Microsoft TechNet here:

  http://social.technet.microsoft.com/Forums/en-us/category/sqlserver .

  I suggest therefore that repost you your question here.

  Thank you.  :)

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• Calc Dynamics Processor cannot allocate more than 350 the heap block of

  Dear users of Essbase,

  I am trying to implement some logic in order to get my calc done by dynamic calc and formula on members.

  My dynamic member calc with formula is not limited to offsetting the conditional statement to the role of alternative only, I see no problem.

  But in order to get the correct result, I include under condition ISMBR statement and restrict level 0 patch replacement on a sparse Member, I get this ' error Essbase (10127000): dynamic calc processor cannot allocate more than the blocks [350] from the jump. The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again '

  IF (@ISMBR (@RELATIVE("ALTERNATIVEROLLUP",0)))

  IF (@ISUDA ("SCENARIO", "XXX"))

  do something...

  ENDIF

  ENDIF

  I looked through this forum and tried to fix my problem in making changes on Essbase.cfg of DATACACHESIZE and DATAFILECACHESIZE values.

  I also checked in the settings of CALCLOCKBLOCK and the error message shows his tent to allocate more than the default value no. blocks that is 350 blocks in my tests.

  I have CALCLOCKBLOCK with HIGH as 4900, settings default than 350. Hope this is good enough.

  As it is on the dynamic calc and formula approach based on, would like to know how to face this question set.

  If you have encountered this problem would like to take suggestions. Thank you.

  Kind regards

  Praveen

  Of course, JM, it was my test script.

  I would like to change my script to be the best :-).

  And I could get rid of the Essbase error in improving more all hides and CALCLOCKBLOCK parameters.

  The operating current system cann't be changed to try chaning type of dimension and other changes required for the TBLAST property. It is one of the obligation that I work. Then try my best to correct and come out with the best solution.

  It is easy to build the new app with fresh demands to try to include new features to the existing system.

  Thanks a ton for your time and your suggestions.

• allocate more memory for my video card

  model of my laptop is HP Pavilion dv4-1444dx entertainment notebook pc. I want to put more memory for the video card. my friend told me that I can assign more ram to my video card. I wanted to reach a certain condition for a game, but the "dedicated video memory" is only 64 MB. the allocated memory is 1.2 GB. I want to increase dedicated video memory. Help, please. Thank you.

  Hello

  Unless you see a BIOS setting allows to allocate more memory from the memory installed modules, it cannot be changed. I just checked the service manual for your laptop series. There is no setting in the BIOS, so the answer is that you can not change it.

  Your best bet is to increase the installed memory to the maximum, depending on whether your OS is 32-bit or 64-bit.

  A 32-bit operating system may use no more @3.2 than GB of RAM while a 64 bit OS can use as much as the motherboard of your laptop (by design) will accept.

  Best regards

  ERICO

• Error 102700 - the calc Dynamics processor can not allocate more than the blocks of the heap [3]

  Hi all

  I'm stuck with this problem which, according to my research, seems to be related to the settings CALCBLOCKLOCK {H, L, D} and CALCCACHE {H, L, D}.

  I changed and I rebooted the server, and I can see them in the properties of the Essbase server.

  In any case I still can't allocate more than 3 blocks from the heap, it seems that nothing has changed. Can anyone advice for this?

  Thank you

  bidi

  Try increasing the essbase database data cache, and then restart the essbase database.

  See you soon

  John

• Allocate more processors

  My laptop has 8 processor cores. But when I run W 8.1 on vmware player it uses only a single processor and number of processors is disabled, so I can't change. Is it possible to allocate more processors for the comment system?

  Thank you

  You try to change the number of procs, while the virtual machine is turned on or off?

  What version of VMware Player are you using?

• script which gives the hostname with more CPU resources and memory available

  Hello

  Anyone have a script which gives the hostname with more CPU resources and memory available in the cluster?

  Concerning

  Vickie

  Hello, VicMware-

  You can get the host with the free CPU, or with the most free memory resources, using the following:

  ## get the host with the most free CPU cyclesGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="CpuMhzFree"; e={$_.CpuTotalMhz - $_.CpuUsageMhz}} | Sort-Object -Property CpuMhzFree -Descending | Select -First 1
  
  ## get the host with the most free memoryGet-Cluster myCluster0 | Get-VMHost | Select-Object Name,    @{n="MemGBFree"; e={$_.MemoryTotalGB - $_.MemoryUsageGB}} | Sort-Object -Property MemGBFree -Descending | Select -First 1
  

  The first would have produced something like:

  Name          CpuMhzFree
  ----          ----------
  myVMHost0          25384
  

  And the latter didn't would be out:

  Name           MemGBFree
  ----           ---------
  myVMHost4        122.323
  

  .. .or each of these host computers are those with the most free memory/CPU cluster, respectively.  What to do the things for which you are looking?

• Cannot allocate more memory to the virtual machine image

  Hello

  I am currently using VMWare Workstation 5.5.4.  I have a Win XP image that I run.  My host computer has 4 GB of ram (3 GB recognized by hospitality Windows OS).

  Currently, I am only able to allocate a maximum of 1 372 MB to my virtual machine Image.  I want to allocate more memory to my image, as I do more memory intensive tasks to my image.  If I try to increase the amount of memory (even to 1376 MB), I get the following error message:

  

  Any ideas on how I can increase the amount of memory I can attribute to my image?  I use only 1 image currently.

  Loking at your vmware.log file, I see that you have a section "DEFAULT USER" including a "prefvmx.allVMMemoryLimit = line 1429". I believe that it is in conflict with the ' SITE HOST/DEFAULTS ' section which specifies "prefvmx.allVMMemoryLimit = 2297".

  The ' HOST/SITE DEFAULTS' config.ini is the traditional config.ini file that people recommend that you edit.  On XP, it should be located in C:\Documents and Settings\All Users\Application Data\VMware\VMware Workstation\config.ini

  I can't tell you exactly where the file config.ini 'DEFAULT USER' is located on Windows XP as I am running Vista.  I would start by looking under C:\Documents and Settings\\Application Data\VMware\VMware Workstation\config.ini to see if this file exists.  Or you can search your hard drive a config.ini file that contains the 'prefvmx.allVMMemoryLimit = 1429"line.

  I would recommend not not using the "DEFAULT USER" config.ini file at all.  In fact, on a default installation of Workstation 6.5 this config.ini file does exist.  I would recommend so transfer config.ini 'DEFAULT USER' settings to the "HOST/SITE DEFAULTS' config.ini and then delete the file config.ini 'DEFAULT USER '.

  After this is done, try again and let us know if things work better.

• Updated to 11 GR 2: how much more CPU will get used by RDBMS-process?

  Hello
  We have the intention to upgrade our existing 9i and 10g to 11 GR 2 databases in the next 12 months. We do not expect to change the hardware
  (HPU - UX). One of the IT managers asked the question: how much more CPU adjust through the RDBMS 11 GR 2 system processes
  compared to the DBMS 9i and 10 g system processes?
  I went through the - upgrade-guide installation and 11 GR 2 but has not found an answer to this question. What should be assumed, it is that the
  material remains the same - which means that the CPU will change, be...
  
  Any useful response will get apologized...

  I don't think that the delta is documented anywhere.

  Minimum requirements for each version of the software are in MOS Doc 169706.1 (Oracle database on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix Operating Systems Installation and Configuration requirements Quick Reference (8.0.5 to 11.2))

  HTH
  Srini