Allow access LAN Local - security issues?

Similar Questions

• Dream Weaver allows access to localized web servers?

  Dream Weaver allows access to web servers located, to test the scripts?

  Thanks in advance

  Of course.  I use WAMP server.  Some people prefer XAMPP or MAMP.  No matter what local test server you use, remember to put your site folder in the local server's default web directory. Wamp is www.  XAMPP and MAMP, use htdocs.

  Www\yourSiteName C:\wamp\

  C:\xampp\htdocs\yourSiteName

  Site > Manage Sites > Edit Site...  See screenshots.

  

  Advanced

  

  Final

  

  Nancy O.

• How to allow access to a local area network behind the cisco vpn client

  Hi, my question is about how to allow access to a local area network behind the cisco vpn client

  With the help of:

  • Cisco 5500 Series Adaptive Security Appliance (ASA) that is running version 8.2 software
  • Cisco VPN Client version 5.0 software

  Cisco VPN client allows to inject a local routes in the routing table Cisco ASA?

  Thank you.

  Hi Vladimir,.

  Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network.

  If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel.

• W7 UAC & local security policy blocks the access of the drive to install W7

  The UAC setting is blocking access to the W7 installation disc and reports error Code: Ux80070005; Retail "user access is denied."
  because ir requires elevated privileges to run W7.  However, I'm already under W7 with administrative privileges at level 2.
  When Windows is running.  When I stop and restart my computer after I insert the W7 disk in the CD/DVD slot, it starts
  in the W7 disk and I get three icons on graphical interface at startup.  1 HD Windows, window OS W7 and Windows EFI boot disk.  Thus,.
  while I can run W7 in OS mode and startup in W7 Installation disc & Windows 7 EFI before starting the system, I can't
  disk access to Installation of W7 after I start OS W7.  Other that this issue, Windows Diagnostic reports no problem with W7
  components or other after market seller software which would explain the problem of registry. My reading of the Forum
  Comments on the problems of the UAC and "Windows 7 Inside and Out" makes me think it's a problem of UAC setting and synchronize with
  Who is not grateful, local security policy setting of the UAC.  I don't want to mess with the registry setting without knowing why.

  Forum assistance requested.  Help, please.

  Hey Herbert,

  1. you try to reinstall Windows 7?

  2. you try to perform a custom installation or a Windows 7 upgrade installation?

  3. why you reinstall Windows 7?

  Please see the link to disable the UAC.

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-in/Windows7/turn-user-account-control-on-or-off

  Please post with more information on this issue to get help.

• Change security groups are allowed access to the project

  Hello

  We have a project of the Disqualification in our production environment that allows only administrators to view/access it. We now allow access of data analysts. I know that we could just edit the prod Manager access security group, but due to some storage issues related to the postgres DB that uses a Disqualification, we clearly downwards and the redeployment of the Disqualification (and the project) on the prod server every two weeks. This means having to manually modify access groups after each reinstall. To save the duty of our many stop to promote a new project dxi file, is there something that can be added to all config files to allow data analysts access the project? Editing a config in our backup file would be very fast and simple.

  See you soon

  Jon

  Unfortunately, no, no.

  I can't imagine a scenario that would require the Disqualification to redeploy completely. If there is a problem of PostgreSQL, the worst case would be a fall and recreate the Pb of results, I would have thought.

• security issues - Security Center displays all low security & access denied

  original title: security issues

  Down on my task bar that I have a flag with a red cross on it, when she opened States that all my safety is low iam unable to turn it back on ive tried to turn it on threw the Task Manager and it tells me access is denied, which makes no sense.

  Start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected. Options vary by region, but phone support leads you to the Microsoft answer service (http://www.answerdesk.com/) in the USA at this time. After an initial free consultation, will be charged a fee for assistance, based on the details of the case.

• Access local security policy in Windows 7 Home Premium

  How can I access local security policies in Windows 7 Home Edition Premium, it is even available in this version?  My default account is an administrator account, but there is still so much that I get ACCESS DENIED errors on. The UAC is low in this version and really doesn't help at all. Am I missing something obvious here?

  (Panel of-> system and security-> administrative tools):

  You should see him there. When you get that access denied and click right on that never - what gives you that and see if there is an option that says run as long as administrator, and then run, as the value default windows 7 Administrator account disable but associated with the admin user.

• Change sharing permissions, now I can't access the local disk

  Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
  Thank you

  Hello

  I suggest you to follow the steps in the link given below and check if it helps.

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message

  Let us know the status of the issue.

• remote VPN and vpn site to site vpn remote users unable to access the local network

  As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

  The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

  ASA Version 8.2 (2)
  !
  host name
  domain kunchevrolet
  activate r8xwsBuKsSP7kABz encrypted password
  r8xwsBuKsSP7kABz encrypted passwd
  names of
  !
  interface Ethernet0/0
  nameif outside
  security-level 0
  PPPoE client vpdn group dataone
  IP address pppoe
  !
  interface Ethernet0/1
  nameif inside
  security-level 50
  IP 192.168.215.2 255.255.255.0
  !
  interface Ethernet0/2
  nameif Internet
  security-level 0
  IP address dhcp setroute
  !
  interface Ethernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  management only
  !
  passive FTP mode
  clock timezone IST 5 30
  DNS server-group DefaultDNS
  domain kunchevrolet
  permit same-security-traffic intra-interface
  object-group network GM-DC-VPN-Gateway
  object-group, net-LAN
  access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
  tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  MTU 1500 Internet
  IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  enable ASDM history
  ARP timeout 14400
  NAT-control
  Global 1 interface (outside)
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  AAA authentication enable LOCAL console
  LOCAL AAA authentication serial console
  Enable http server
  x.x.x.x 255.255.255.252 out http
  http 192.168.215.0 255.255.255.252 inside
  http 192.168.215.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dynmap 65500 transform-set RIGHT
  card crypto 10 VPN ipsec-isakmp dynamic dynmap
  card crypto VPN outside interface
  card crypto 10 ASA-01 set peer 221.135.138.130
  card crypto 10 ASA - 01 the transform-set RIGHT value
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  crypto ISAKMP policy 65535
  preshared authentication
  the Encryption
  sha hash
  Group 2
  lifetime 28800
  Telnet 192.168.215.0 255.255.255.0 inside
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH timeout 5
  Console timeout 0
  management-access inside
  VPDN group dataone request dialout pppoe
  VPDN group dataone localname bb4027654187_scdrid
  VPDN group dataone ppp authentication chap
  VPDN username bb4027654187_scdrid password * local store
  interface for identifying DHCP-client Internet customer
  dhcpd dns 218.248.255.141 218.248.245.1
  !
  dhcpd address 192.168.215.11 - 192.168.215.254 inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Des-sha1 encryption SSL
  WebVPN
  allow outside
  tunnel-group-list activate
  internal kun group policy
  kun group policy attributes
  VPN - connections 8
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value split tunnel
  kunchevrolet value by default-field
  test P4ttSyrm33SV8TYp encrypted password username
  username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
  username kunauto attributes
  Strategy Group-VPN-kun
  Protocol-tunnel-VPN IPSec
  tunnel-group vpngroup type remote access
  tunnel-group vpngroup General attributes
  address pool VPN_Users
  Group Policy - by default-kun
  tunnel-group vpngroup webvpn-attributes
  the vpngroup group alias activation
  vpngroup group tunnel ipsec-attributes
  pre-shared key *.
  type tunnel-group test remote access
  tunnel-group x.x.x.x type ipsec-l2l
  tunnel-group ipsec-attributes x.x.x.x
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
  : end
  kunauto #.

  Hello

  Looking at the configuration, there is an access list this nat exemption: -.

  192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

  But it is not applied in the States of nat.

  Send the following command to the nat exemption to apply: -.

  NAT (inside) 0 access-list sheep

  Kind regards

  Dinesh Moudgil

  P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

• ASA 5505 IPSEC VPN connected but cannot access the local network

  ASA: 8.2.5

  ASDM: 6.4.5

  LAN: 10.1.0.0/22

  Pool VPN: 172.16.10.0/24

  Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

  I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

  Here is my setup, wrong set up anything?

  ASA Version 8.2 (5)

  !

  hostname asatest

  domain XXX.com

  activate 8Fw1QFqthX2n4uD3 encrypted password

  g9NiG6oUPjkYrHNt encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 10.1.1.253 255.255.252.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  address IP XXX.XXX.XXX.XXX 255.255.255.240

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS server-group DefaultDNS

  domain vff.com

  vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

  access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

  pager lines 24

  Enable logging

  timestamp of the record

  logging trap warnings

  asdm of logging of information

  logging - the id of the device hostname

  host of logging inside the 10.1.1.230

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA-server protocol nt AD

  AAA-server host 10.1.1.108 AD (inside)

  NT-auth-domain controller 10.1.1.108

  Enable http server

  http 10.1.0.0 255.255.252.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 10.1.0.0 255.255.252.0 inside

  SSH timeout 20

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntest strategy

  Group vpntest policy attributes

  value of 10.1.1.108 WINS server

  Server DNS 10.1.1.108 value

  Protocol-tunnel-VPN IPSec l2tp ipsec

  disable the password-storage

  disable the IP-comp

  Re-xauth disable

  disable the PFS

  IPSec-udp disable

  IPSec-udp-port 10000

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntest_splitTunnelAcl

  value by default-domain XXX.com

  disable the split-tunnel-all dns

  Dungeon-client-config backup servers

  the address value vpnpool pools

  admin WeiepwREwT66BhE9 encrypted privilege 15 password username

  username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

  the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

  tunnel-group vpntest type remote access

  tunnel-group vpntest General attributes

  address vpnpool pool

  authentication-server-group AD

  authentication-server-group (inside) AD

  Group Policy - by default-vpntest

  band-Kingdom

  vpntest group tunnel ipsec-attributes

  pre-shared-key BEKey123456

  NOCHECK Peer-id-validate

  !

  !

  privilege level 3 mode exec cmd command perfmon

  privilege level 3 mode exec cmd ping command

  mode privileged exec command cmd level 3

  logging of the privilege level 3 mode exec cmd commands

  privilege level 3 exec command failover mode cmd

  privilege level 3 mode exec command packet cmd - draw

  privilege show import at the level 5 exec mode command

  privilege level 5 see fashion exec running-config command

  order of privilege show level 3 exec mode reload

  privilege level 3 exec mode control fashion show

  privilege see the level 3 exec firewall command mode

  privilege see the level 3 exec mode command ASP.

  processor mode privileged exec command to see the level 3

  privilege command shell see the level 3 exec mode

  privilege show level 3 exec command clock mode

  privilege exec mode level 3 dns-hosts command show

  privilege see the level 3 exec command access-list mode

  logging of orders privilege see the level 3 exec mode

  privilege, level 3 see the exec command mode vlan

  privilege show level 3 exec command ip mode

  privilege, level 3 see fashion exec command ipv6

  privilege, level 3 see the exec command failover mode

  privilege, level 3 see fashion exec command asdm

  exec mode privilege see the level 3 command arp

  command routing privilege see the level 3 exec mode

  privilege, level 3 see fashion exec command ospf

  privilege, level 3 see the exec command in aaa-server mode

  AAA mode privileged exec command to see the level 3

  privilege, level 3 see fashion exec command eigrp

  privilege see the level 3 exec mode command crypto

  privilege, level 3 see fashion exec command vpn-sessiondb

  privilege level 3 exec mode command ssh show

  privilege, level 3 see fashion exec command dhcpd

  privilege, level 3 see the vpnclient command exec mode

  privilege, level 3 see fashion exec command vpn

  privilege level see the 3 blocks from exec mode command

  privilege, level 3 see fashion exec command wccp

  privilege see the level 3 exec command mode dynamic filters

  privilege, level 3 see the exec command in webvpn mode

  privilege control module see the level 3 exec mode

  privilege, level 3 see fashion exec command uauth

  privilege see the level 3 exec command compression mode

  level 3 for the show privilege mode configure the command interface

  level 3 for the show privilege mode set clock command

  level 3 for the show privilege mode configure the access-list command

  level 3 for the show privilege mode set up the registration of the order

  level 3 for the show privilege mode configure ip command

  level 3 for the show privilege mode configure command failover

  level 5 mode see the privilege set up command asdm

  level 3 for the show privilege mode configure arp command

  level 3 for the show privilege mode configure the command routing

  level 3 for the show privilege mode configure aaa-order server

  level mode 3 privilege see the command configure aaa

  level 3 for the show privilege mode configure command crypto

  level 3 for the show privilege mode configure ssh command

  level 3 for the show privilege mode configure command dhcpd

  level 5 mode see the privilege set privilege to command

  privilege level clear 3 mode exec command dns host

  logging of the privilege clear level 3 exec mode commands

  clear level 3 arp command mode privileged exec

  AAA-server of privilege clear level 3 exec mode command

  privilege clear level 3 exec mode command crypto

  privilege clear level 3 exec command mode dynamic filters

  level 3 for the privilege cmd mode configure command failover

  clear level 3 privilege mode set the logging of command

  privilege mode clear level 3 Configure arp command

  clear level 3 privilege mode configure command crypto

  clear level 3 privilege mode configure aaa-order server

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

  : end

  Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

  The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

  On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

• Local security configuration DCOM blocked me as an administrator. Many functions of Windows do not work

  Dell Optiplex 745, XP Pro, SP3. The computer is 3 years, 3 G of Ram. Fully secure and clean.

  This is what appears in the local security settings, Security Options: DCOM: Machine Access: 0:BAG: BAD:

  I am an administrator and the main user of this computer. Most of Windows functions do not work IE, Office, Outlook, Security Essentials, copy & paste, all dead. Will not allow downloads (Dell has tried to put a remote meeting and the computer won't do anything. No system restore, I tried Safe Mode, can not access user accounts. I'm stuck on my computer. Dell says it's a problem of Ms.

  I can't open my documents. Word does not. Excel does not open. I use this computer for work and have important files that will not open.

  Goggling BAG: BAD brought me an article of the millisecond that changed the security system. I tried the directions and will not work. I hope someone understands what I'm trying to explain. Dell offers a complete reinstallation of XP, but I'm afraid that I lose my documents, pictures, music.

  I don't know what caused it, that happened this week, I don't know how to fix it. System Restore is a white screen. Can not open anything or run analyses "access denied" or the product is not registered. I get all sorts of errors.

  Please advise,

  Jane

  Hi Jane,

  Follow the steps below:

  Method 1: Scan files (SFC) system auditor

  Make the SFC scan on your computer and check to see if that solves the problems.

  See the Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe) for instructions.

   

  Method 2: Repair install

  Perform a repair of Windows XP installation to fix the problem.

  For instructions, see the following article:

  Perform a repair Installation

  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx

  Note Perform the repair installation does not loss of data on your computer.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• custom palette with tabs to swf Flex cannot access the local file system

  OK, with Flash Player 10, we can load and save local files from a flex web application, then why can't I in the bridge, when I load the SWF in a palette with bridge tabs, load and save functions no longer work.

  Is it because I'm loading as a ScriptUI called range of flash, instead of a palette of HTML?

  I tried the overall Flash Player security in order to allow the authorization of my swf and created a .cfg, but nothing seems to work.

  Help, please.

  Thank you, Todd

  I don't know exactly how your Panel is a failure. I have attached three examples of Flex projects that include the JavaScripts and Flash panels for bridge. These all worked for me in Bridge CS4.

  To access the local, I used FileRefrence.save () for these tests - note that this method is file system was added in Flash Player 10, and so this will not work in Bridge CS3, which uses the Flash Player 9 when you use a widget Flash Player in ScriptUI. In addition, to compile the example I had to modify the Flex builder projects require Flash Player 10 by changing the settings on the page 'Flex compiler' project in Flex Builder settings.

  If you use another method to access the system files that works with Flash Player 9, please let me know what it is and I can test it.

  Among sovereign wealth funds also gain access to the network. To activate SWF access to the network, I had to add a file of global security settings. Information on creating these files are available here:

  http://www.Adobe.com/devnet/flashplayer/articles/flash_player_10_security.PDF

  But, for example, on my mac, I put all these projects in a "BridgeFlashPanels" folder on my desktop. Next, I created the BridgeFlashPanels.cfg file in/Library/Application Support / Macromedia / FlashPlayerTrust. The .cfg file had a line: the path to the folder on my desktop.

  A description of the panels:

  PanelWithNetworkAccess - this Panel has a 'Test' button, when clicked, loads http://www.adobe.com and place it in the text box (note, it will be just the raw HTML, does not make the page).

  PanelWithFileSystemAccess - for Flash Player 10 only, this Panel has a Test button and a text field. When you click the Test button, it writes the contents of the text box in the BridgeTest.txt file, unless you choose another file.

  PanelWithNetworkAndFileSystemAccess - for Flash Player 10 only, this Panel has a text field and two buttons: "Load Test" and "Test to save." The load test loads http://www.adobe.com in the text field and save him testing saves the content of the text field to BridgeTest.txt.

  To try signs, navigate the bin-debug for each project files with Bridge, the .swfs and .jsx files are there. Double-click the thumbnail for the .jsx and bridge must run the script and add the sign indicating the SWF file.

  -David

• help me: I forget have security issues

  I forgot have security questions , and I have tried to replace it but asked me access to the code on my iPad , but I 've been selling

  Forgotten security issues

  1. If you forgot the answers to your questions of security of Apple ID - Apple Support
  2. Apple ID - all about Apple ID security issues
  3. Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
  4. Security issues

• I forgot the security issues for apple i.d.

  I recently tried to buy something on the ios app store, and it prompted a response to my security questions. I honestly don't remember any security issues. I tried to reset, but you need to call apple. I would just call apple but with American products, I live in a non-English foreign English speaking country and have no international vocation. Is there a way to chat with apple instead of calling them?

  If you don't have an alternate email address on your account, then you will need to contact support in the country where you are (and therefore the country on your account) for the reset of questions: If you have forgotten your Apple ID - Apple Support security questions answered

  If you are unable to reset your security questions

  You cannot send an e-mail to reset, if not an alternate email address, or cannot access the e-mail to your e-mail address of rescue, call us for help. When you call, you may need to create a temporary support PIN to verify your identity. After resetting your security questions, you can update your email address for help.

  If your country is not on this page "ask us for help", or if they do not speak English when you contact them, then try this form to contact Support and see what they respond with (it must respond within 48 hours): https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then add a backup for possible future use email address: on your Apple ID - Apple Support email addresses

  Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

• iCloud security issues

  I tried to access my iCloud account and they asked me my password I already saved his entry easily. After that they asked for security issues that I don't even remember that I did before. How can I enter 2 my iCloud account now?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (141766)