Similar Questions

• 5 CC of Lightroom does not start after 2014 update.

  5 CC of Lightroom does not start after 2014 update. Mac OSX 10.8.5. Tried the suggestion to sign out of cloud of Adobe and reconnect. Also restarted computer. No luck. Photoshop CC 2014 seems to have installed perfectly. Can not install the previous version either, can still find Adobe cloud. Tried to re - download from the Adobe web site, but that's where saying 'Download now'-, but nothing is downloading!

  Thank you, this was not the problem for me. Both have been set read/write. Finally, I downloaded the "demo". It installed fine and seems not to be re-registered.

• ORA-16143: connections of RFS not allowed during or after a Terminal recovery

  Hi all
  
  I wanted to transfer primary DB archiving log of STANDBY DB by the window / given destnination
  
  After you have created the database physically Eve, I put database waiting for recovery by using the command:-change the recovery of database managed standby database disconnect from the session.
  
  After that when I ran this command: -.
  ALTER database recover managed standby database finish;
  
  After that when I tried to recover database to help given comand awaiting:-recover managed standby database.
  
  Get the error such as ORA-16143: RFS connections that are not allowed during or after a Terminal recovery
  
  I can see this error on primary DB filev alerts log
  
  I can open my database in waiting.
  
  The two Oracle: 10.2.0.4
  The two platform: RHEL 4.7
  
  Please suggest me for this, help is appreciated
  
  Published by: user1687821 on July 12, 2010 08:37

  user1687821,

  After the use of the clause to FINISH, you MUST open the standby database as PRIMARY.

  Finishing clause must be used while you're perparing to failover to your database pending.

  Which is clearly given by the error message; you did a cover of Terminal:

   ORA-16143: RFS connections not allowed during or after terminal recovery 
  

  unless you have a pending restore point until you execute the clause of finishing, you will need rebuild your watch or use it as the primary database.

  See you soon.

• Firefox will not play SermonConnect mp3 files that have been uploaded to Amazon S3 server using S3 Organizer after 2014 7. Already downloaded the files OK.

  Files uploaded to the Amazon S3 server are accessible via our Web site at littlecountrychurch.org. All multimedia files downloaded before January 7, 2014, be played properly on our media page. Files uploaded after January 7 refuses to play on the Firefox browser. To add to the confusion, other browsers Chrome, Safari, Internet Explorer on Windows and Mac-play these files correctly. In addition, an older version of Firefox on an XP laptop plays files correctly. We even ran a test by downloading a working of the S3 server, re-uploaded the file file and Firefox would not read the freshly downloaded file, but he continued to play the same file previously downloaded without problem.

  The problem is the content-type header sent to S3. The old MP3s are designated "audio/mpeg", which is perfect. Newcomers are designated "application/download", which does not work in Firefox native HTML5 audio player. (The inset on the screenshots is pasted from a screenshot of the Fiddler proxy).

  On a normal web server, all .mp3 files usually served in the same folder have the same content type. Something seems different about Amazon storage, perhaps based on a difference in their environment "backstage."

• End of Cup Video Clip off the power when send you first Pro CC 2014 to effects after 2014 CC and I slowed down with Timewarp?

  When I send a clip from Premiere Pro CC 2014 to after effects CC 2014 and I slowed down with Time warp the clip cut of 75% at the end of the video and display only the first 25% slow.  How can I fix this and how I round it travels in first pro to play the FULL slow motion video clip?

  Try adding effect temporal Deformation on an adjustment layer in AFX, rather than on the video it self.

• Why the home screen is run after 2014 CC PS launches?

  Since I installed cc PS 2014 every time that I run the PS application is will bring to the top of the Welcome screen after desktop appears.  It is of no use to any user exp. even medium... and is was one of time and resources!

  If you don't want to the home screen of the user, you can turn off. Troubleshoot the screen of welcome in Photoshop

  ~ David

• Try to update adobe. Do not get any bar to 'allow' the page after pressing the toolbar installation. Where the bar of "allow"?

  Try to update adobe. The instructions say that I see a bar 'allow' pop-up when I try to accept the update. I don't get all toolbars appear and cannot proceed with the update from adobe.

  This has happened

  Each time Firefox opened

  The instructions on the Adobe site are obsolete and apply to older versions of Firefox. Since your Adobe Reader plugin is up to date, I assume you are trying to update Flash, if you have not specified which Adobe product. We the instructions below.

  Install/update Adobe Flash Player for _ : your version 10.0 r32; current version 10.1 r53 (update of important safety 2010-06-10)
  
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND__~ ~ How to change options to add Adobe to the list of allowed sites

• How to allow the computer after reconstruction because of hard disk crash.

  ITunes does not offer the ability to remove the old computer off allowed list name and now don't allowing to auth all until August-2016.

  Click here and ask for help from the staff of the iTunes Store. Only, they can perform a second remove all within the annual period.

  (137529)

• [URGENT]: problem after cc 2014 effect

  I had the effect cc after 2014, and from one day to the next, it would be more open. So I think that's a normal problem so I tried to download the new version except that! the same thing :/

  Can you help me as it is very essential for me is that I made the motion design

  Error 34 https://forums.adobe.com/thread/2019728

• After the 2014 CC CC 2015 Application PS and LR upgrade cannot be run

  Hi, I have any problem after 2014 to 2015 CC CC. Previously, he worked well. As my plan I use LR and Psalm but, given that I've upgraded to 2014 CC the two application cannot be launched. My subscription is on, but, for this period of one month, I can't advantage since I can't we ch & LR. Anyone know how to fix this?

  My computer is under

  

  I tried to launch it by using the administrator also still fail. The system has failed.

  

  Hi Arief,

  CC 2015 default application installation removes the CC 2014 of this particular application version.

  Try to uninstall the CC 2014 application that displays currently on your computer and then you can install it again.

  Please see the link below to return to the CC2014 apps:

  http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

  Kind regards

  Sheena

• "TypeError: undefined is not an object ' after the 2014.1.1

  I see the error: "TypeError: undefined is not an object (evaluation of"cpoint.getSymbolElement") in a composition of _upgraded that arouses points and tooltips to not appear in the charged composition.»

  Animate edge version 2014.1.1

  Mac OS 10.10.1

  Safari 8.0.2, 40.0.2214.94of Chrome, Firefox 35.0.1

  This question has started to happen after 2014.1.1 updated

  No changes have been made to my computer and I tested it on other computers with the same result

  Here is the improved composition that does not work: http://inlightmedia.com/edge-interactive-svg-maps_upgraded/

  Older composition which displays correctly the pins and ToolTips: http://inlightmedia.com/edge-interactive-svg-maps/

  Two compositions zip files: Zip file

  I strongly am a rookie Edge and JavaScript and have been amend this (which was created by someone else is no longer supports) according to my needs. Any help is at work in the new version of edge would be greatly appreciated.

  Thank you
  Jansen

  Hello

  It's compositionReady, the #34 line:

  You've written: var = cpoint sym.createChildSymbol ("point", "stage");

  and it was: var sym.createChildSymbol = cpoint ("point","STagus");

  step must be capitalized: stage.

• Firefox forget the popup allowed sites

  I continue to add sites to its list in the menu under options popup blocker. I can confirm the site are added and allowed the popups after that I have add URLS to the list of exceptions.
  When I close Firefox and reopen it, his list is a party. I have to start from zero and re - fill my allowed list. I'm under 11.0 and I believe that the problem started in 10.0

  How can I get FF to remember my pop ups allowed?

  Hello

  Please see this. Please also note that if clear history of Firefox closing is enabled in Tools (Alt + T) > Options > Privacy, then Preferences of Site under settings should not be enabled. Options > privacy

  Options

• False values of voltage using NI 9225 and ELectrical Power Suite 2014

  Hi all

  I have a few problems regarding the use of a map of analog voltage NI 9225 with code exaple quality Applications of power (cRIO) (Delta-Sigma) of the Electrical Power after 2014. Running the example code I values of voltage wrong, they are exactly doubled! For exaple with a 230 V RMS input I get 460 V RMS. I think the problem is the module, because by default, the code example expects to use a module NI 9242. Before the upgrade to LabView 2014, everything worked perfectly with EPS 2013. Am I something missung? I configured the C module in the project manager in the same way that I used with EPS 2013. Can someone help me? Thank you

  Gianluca

  Hi Gianluca,

  If you use other types of modules in the example, you must take care of the conversion of accuracy in the FPGA VI.

  As FPGA VI resampling takes the signal of type fixed point +-24.1, you convert the +-24,10 and-24,5 to 24.1 in the Data Acquisition loop before feeding to the FPGA VI resampling.

  And in the loop of data Communication, you restore the output of +-32,3 to 32,12 - signal + and +-32.7. Notice at the time the zoom in and zoom out are equal.

  If you change other types of modules of different precision, you must change the precision of the given thread.

  For example, 9244 accuracy is +-24.11, so when you convert it to +-24.1, you must restore it by variation of-32,3 to-32,13.

  Please refer to the screenshot:

  

• Windows 7 Home Premium x 64: activation of the service Windows Update crashes my computer after upgrade RAM

  A few days ago I had two sticks of 2 GB GSkill RAM by mail. Here's the same brand, model and size as the pair currently installed (obviously). (Sticks alternate according to the specifications of the card from my mother)

  After you have installed the new RAM and the computer starts up, it freezes within about 30 seconds of connection. Before installing the new sticks, I had no problem whatsoever.

  My first thought is that I sit the RAM properly, then I go and reinstall it. I start, and the same thing happens.

  So obviously this RAM must be bad, right? When I take out news, not gel. Ah, but when I remove the OLD stuff and use new instead, I ALSO no gel. So maybe it is not the RAM.

  Then I reboot in safe mode. No gel. Interesting. I opened the window 'System' and it says "memory (RAM) installed: 4.00 GB ', which is correct." I opened CPU - Z, and it reports also 4 GB of memory. I run a few hours and have no problems whatsoever. So I say to myself, there must be either a Windows service or a 3rd party service is causing the issue and not the new RAM.

  I disable all services of 3rd parties and restart in normal mode. It freezes. OK, so maybe (though unlikely) I have a virus any (I say probably not because I have to) run the module additional firefox NoScript, and set to block all flash, javascript, xss, iframes, etc. - in other words, only allow to my whitelist and B) I have Windows Firewall and running McAffee and updated.). But I decided to first try Windows services for the hell of it.

  So I enable only the services that start in safe mode as my reference, disabling the rest via services.msc. I start normally and not gel. Great, then maybe it is a Windows service. I start which allows one service after another without any problem. I get to the bottom of the list and select the Windows Update service. Within literally 10 seconds my computer crashes. Large.

  As a validation test, I put all services back to the base line of safe mode and only allow Windows Update. I start normally, and again once it freezes.

  Another test of validation, I start with all normal, but disable Windows Update. Do not freeze. I'm going to start Windows Update. Yet once, it freezes for about 10 seconds. So clearly something is in place.

  As a third and final sanity check, I remove the new RAM and run a Windows Update. He finds a few optional updates, but not critical. My system is up2date.

  My only attempt to solve this problem so far was to backup all Windows Update DLLs (C:\windows\system32\wu*.dll, although I don't know if these are good) and do a scan sfc to replace them with copies of 'good '. It did not work.

  So my question is:

  Why cares Windows Update that I have 4 GB of memory installed?

  Thank you

  Jon

  1. I 'upgraded' from the RC of Windows 7 x 64 for Win 7 x 64 Home Premium.

  2. I use McAfee VirusScan Enterprise 8.7.0i, DAT version 6060, Scan Engine 5400.1158

  3 No.

  4. No, I put together this computer myself.

  ______________________

  To answer my previous posts:

  I think the USB storage is a separate issue. And.

  I think I * may * have solved the problem of origin with one or more of the following (don't know who):

  • Updated the software of the chipset of the card from my mother.
  • Updated HD Windows audio drivers to the recommended ASUS (Realtek) HD audio drivers
  • Updated since Windows installed NVIDIA display drivers for version NVIDIA WHQL.
  • Increased my tRFC (refresh time of line) to 70 52 clocks clocks. Set my GSKILL DRAM voltage recommended by 2.1V. Off the SPD DRAM configuration (I read that ASUS is not entirely based on the SPD and can affect things on its own).

  I had WU for 20 minutes from writing this post without a freeze, so we'll see. (Previously, it would freeze within 10 seconds of turning on WU)

• ProBook 640 G1: Audio HW buttons problem after Windows Installer 10

  Hello world.

  Last week, I upgraded from W7 to W10, installed all the drivers from HP and upgrades all the buttons and then the keys fn + hardware configurations worked as expected.

  Today I swapped HDD with SSD and installed a clean W10. Yet once with all HP drivers, including sp71790 Hotkey support and support wireless sp71707 button.

  Now the wireless button keys fn + f9/f10 and fn + f6/f7 works as it should, but rather:

  -the works of Mute speakers button (speakers get mute and screen popup confirmation appears) but still, it stays white and is not orange when muted. It's infortunate because mute State speaker is missing.

  -does not work microphone mute (fn + f8) and signalling led on the button turns on. (The microphone itself works, but she's not get dumb).

  These features worked flawlessly in W10 when upgraded to W7. In the new facility, that they do not.

  Can someone help me?

  Thank you.

  PROBLEM SOLVED

  Audio chipset on my G1 640 is audio IDT high definition.

  Unfortunately, it seems that no updated drivers are available after 2014 - win8.1

  I just took and installed the IDT audio driver in the list of drivers for the G1 640 win8.1.

  Now, all the keyboard shortcuts work properly and a panel of additional audio control with various features and functions has been added.

  Win10 instead by default installs a sound driver of 'High definition' of Microsoft which is probably a simplified version of vanilla with no improvements, but the most important is not well interact with HP quick access keys.

  HP should get aware of this and direct customers towards using the old win8.1 IDT, not the driver Microsoft.