Always get welcome to the log screen, why?

Similar Questions

• How can I get rid of the splash screen in Flash Pro cs6

  I used flash in its early versions, but didn't have a reason to use it for many years. I installed it on my desktop and now find myself needing to use it for a small project. So I open the program, and of course, it is open to this really annoying splash screen. and it turns out that I can't find any way to leave this splash screen. My screen resolution is at 1024 X 768, and I can see easily all the splash screen. But what I don't see is somehow too leave this screen which is a real issue because it allows me to continue my project. I even chose one of the enumerated option; "Flash project", but still the splash screen does not disappear.

  How can I get rid of the splash screen & can I make disappear forever. ???

  When you open CS6 and that you can't get anywhere, you can always select Preferences. There, under general, you can select which shows when you open Flash Pro. Change the welcome move on screen.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• I want to get rid of the Bing screen, but there is no "menu at the top of the Firefox window" for me "Select tools and then select the Add-ons menu item.

  I suddenly have a 'Bing' screen when I connect on Firefox - and I want to get rid of it. The support section of Firefox says
  1 "in the menu at the top of the Firefox window, seledt tools, and then select the Add-ons menu item." - but I don't see any 'menu item' tools, or much less modules.
  2. "in the window modules, click the Extensions Panel"- but how to find the Modules window?
  3. find the Bing and extended support to search toolbar in the list and then click on disable for each of them. ' - but what and where exactly is - this?

  At the top of the screen is only an icon of Yahoo to the left and to the right of it, a search box, 'Web search', 'My Apps,' Yellow Pages,""Weather","Updates"and"Skype ". to the right of the people, there is a green cross saying "add more applications. to your toolbar"and to the right of this one kind of gear shift looking icon saying"toolbar settings ".
  So, in short, how can I get rid of the Bing screen and how to access these tools?
  Thank you.

  Versions of Firefox 3.6 + have a feature to allow the user to hide the Menu bar.

  Press the Alt key to temporarily show the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.
  
  The F10 can also be used on most PCs to temporarily reveal the menu bar.

  https://support.Mozilla.com/en-us/KB/menu+bar+is+missing

• Sometimes, the Lenovo Y40 gets stuck on the Lenovo screen?

  The Y40 I bought in July sometimes gets stuck on the Lenovo screen where the laoding circle does not appear. It happens only intermittently, but occurs more often after long use (more than 45 minutes). Technical support already tells me to reset the BIOS and restore windows. Do you know the guys from any thing that can cause this problem? Would it be a HARD drive broken or damaged OS? Thank you!

  I've already sent my laptop in for repair. The technical support representative said that it was either a HARD drive or motherboard problem

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express.

  cannot send error 0x800CCC0B group

  I can't send an e-mail as a group, with or without an attachment, I always get error 0x800CCC0B the message, I have outlook express (not sure which version) under XP, I used to be able to send a group with 500 more emails in it, I tried to narrow the group to 200, but it makes no difference can anyone help?
  Check out this link. Apparently there is a max of 100 recipients simultaneously and they also will disable your account temporarily if you try many times.
   
   
  http://help.virginmedia.com/system/selfservice.controller?CONFIGURATION=1002&PARTITION_ID=1&TIMEZONE_OFFSET=&USERTYPE=1&VM_CUSTOMER_TYPE=&CMD=VIEW_ARTICLE&ARTICLE_ID=75643&RELATED_ARTICLE_CLICK=1&RELATED_ARTICLE_NAME=Sending%20limits%20in%20Virgin%20Media%20Mail

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• Is it possible to get rid of the splash screen, the screen of the app and go straight to the desktop?

  Original title: I h8 windows 8.

  I don't like having to go through two screens to start my computer and two screens to close.  Add the startup of the screen and the screen of the application tiles does improve performance, they interfere. I don't see what's the difference between have icons on my page tiles and the application windows on my screen, except that the former is more efficient.

  Is it possible to get rid of the splash screen, the screen of the app and go straight to the desktop?

  Easy solution for this. You can download the Start button after the installation your computer will work like all the other previous windows and ordinarysoft.com. You will have all the programs with your button/start menu 'start '. The installation start opt to escape metro and you never see it again. Tell me if you have any problem to find the button start or downloading from the link I told you. Its free of cost.

• My ENVY 17-j092nr Notebook PC flicks or vibrates randomly on the log screen Windows and other software

  Im a pc user ENVY 17-j092nr Notebook PC (windows 8.1 with all the drivers) and the OS updates works very well, however sometimes im getting an annoying error that allows windows vibrates like crazy, the problem is a little weird to explain, it makes the BAR on explorer.exe folder flick and other executives 'content' of several software Firefox for example the top bar which is orange starts helpeless flick, or in vlc, it even move, and then the worst on the windows log screen, which makes my movies quick photo from the left to the centre several times per second, making it impossible to write any Password and its annoying when especilly simple pass off work (problem happens very often, but I'm not complaining here).

  The thing I've tried:

  -Change of mouse and video installation, screen, mouse and other dirvers in addition to their update.

  -With the help of build of Windows and external software trouble and repair ultilities.

  Updtading - OS (why? dk but I tried alternatives).

  -Electricity disconnection when this occurs (as sugested in other forums), did not work.

  -Clean the fan and avoiding any external particle on the laser mouse.

  Well well, not that im complaining about the laptop, which work very well over a budget, like it, it's just that the error which bug my HP to be good (if not perfect) experience, please someone help on this im looking forward to HP service work to help me fix this problem for good, is really annoying, especially when you try logging thx.

  I'm not Dunidar thank you for you time to grow another, I opened the cover of portable and yes I found a few in there, dead ants cleaned that upward I don't mind much about warranty or anything like that in any case thank you for your attention, you did a wonderful job help here , the problem has not demonstrated again the science I did it this morning so I think the ants where to do this kind of electric bridge I guess I DK much to this topic but, once again, thx for you excellent support cheers.

• Hi my name is Vanessa, could someone help me get rid of the 'Blue Screen of Death'

  I have Vista Home, 2 minutes after the start up, the blue screen appears and stop, can operate in Mode safe mode, I can't seem to download Service packs or updates McAfee antivirus software? Thank you

  If everything works in Mode safe - which indicates that, for me, something that is normal (as an application) or some loading driver (material - such as video device, etc.) is the origin of the problem since those who would not charge mode without failure.

  You can use MSCONFIG in safe mode to clear a lot of things that would normally load and boot into normal mode.  See if it crashes.

  If it's not - start adding things back using MSCONFIG once both and restarting between each to determine if it starts crashing again and you have added back that will be the culprit.

  If it plant, it could be a driver that has been recently loaded.  Maybe you enabled Microsoft update to install a new video or audio driver driver or driver of network or something.  You can go through each of those in safe mode and see if you can roll back the driver for each of them, one at a time, to an earlier version.  Start in normal mode after each fold and see if find you stability.  All that you can't cancel them were not being updated since you have the system. ;-)

  It is a good starting point.

  For a more complete list of things, commissioning...

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  You want to scan your system to see if you actually have some virus/malware?

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

• How can I get rid of the widgets screen?

  Since the upgrade to iOS 10, a widget screen when I start my phone.  How can I get rid of this sort my identification of access/contact code screen appears when I turn on the phone?

  Thank you.

  With iOS 10, if you see the widget screen by sliding the lock screen is normal and how the new iOS.  It is more action 'slide to unlock' available in iOS 10.

  To operate the unit and go directly to the password entry screen (if you are using a fingerprint recognition), press the home button twice.

  In iOS 10 from the lock screen, are the only gestures by scanning

  1. slide from right to left to bring up the camera

  2. slide left to right to bring up the widgets screen (from the widget screen, swipe down to search for).

• I get errors like the smart screen filter .service online is unavailable temporanly and empty registry key access/references path can only help.

  I need assistance with errors that I have get.1 is QTCF.dill is missing from your computer. TR/reinstall the program to fix this Problem, and, Microsoft.PowerShell.Commands.Utility.dill-Help.xml:safari.exe-systemEr... and properties of key objects valid - depthobject [] switch parameter, the string of Formaterror display or display the error, the smart Screen Filter Online Service is unavailable temporanly QTCF.dill and failed to install Google Earth plugin needs administrative privileges to install. Error 0 x 80040716 and 0 x 80040717 and path empty registry key access/references, can you or someone help me get this computer working again, please.

  Thank you

  Julian Croruth

  QTCF. DLL is a file QuickTime from Apple.

  I suggest that you visit the Apple forum for questions of QuickTime.

  You could also QTCF BING. DLL for solutions.

• How can I get rid of the blue screen error?

  Original title: Windows Vista Start does not

  Hello
  I have Windows Vista Home Premium, and I've had it for 5 years now (2006-) the problem is that I don't know what happened, but when it restarts, I have two options;

  Startup Startup Repair (recommended)
  Start Windows normally

  When I choose "Start Windows normally", a blue screen appears with an error message and disappears quickly, leading me to restart my Vista again. However, when I select Launch Startup Repair tool, it takes a while and after a bit, it ask if I want to send the error to microsoft (recommended) and I choose Yes, and it takes a little more time to look for a solution. Finally, a list of appropriate actions appear;

  Startup Repair; I tried this 8 times now, and he cannot find a solution, leading me to reboot once more.
  System restore; I tried ALL the dates of the restoration, and none of them worked. I got an error saying: it cannot restore.
  Restore the computer; 1. I don't have a backup drive (it's a shame, I know) and 2. I don't want back up and lose all my files.
  Windows Memory Diagnostic tools; I checked all hardware error, and none have been found.
  Command prompt; I don't know what to do with it.

  If someone can PLEASE help me, I would be VERY grateful. I have very old memories and photos on this computer and I don't want to lose these. I am begging for someone to help me, and my last priority would be to forget all these photos and files and move: (.) Oh and I tried running safe mode, by pressing F8 while the computer restarts and I've highlighted Mode safe mode with networking, but it gives a quick overview of a blue screen just and hangs on reboot. Please help me on the procedure to follow for the good of my IMPORTANT files and memories.

  Thank you, in advance.

  Hi AffanX,

  Method 1: Try to disable automatic reboot in the menu start-up advanced options, and then try to capture the blue screen error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode 

  Method 2: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  After disconnecting all external devices, run the Startup Repair

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  You can see the steps below for more information

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  (Article above applies to Windows Vista)

• Event Viewer Windows 7 'Administrative events' can not clear the log? Why and is there a solution?

  Window 7 has many error logs in the "Event Viewer", but all seem to have the ability to "Clear log" except the Administration? Why? I looked at some of the entries, and they you are referencing my "security cameras" this automatic restart after a power/Brown power. Yet I have not found a way to "clear a log this ' under 'Administrative events?' Is there a way to clean this newspaper? It's more than 1100 events, and none are major.

  Thank you

  Hank

  Hank

  Delete all log files, including the journal of the administrator combined, by running this command as an administrator file save it to the desktop and right click to run it. The link is here http://www.sevenforums.com/tutorials/25480-event-viewer-one-click-clear.html?ltr=E