an easy way to bookmark, choose a nested folder structure

Similar Questions

• How to import bookmarks to IE8 Favorites folder

  My laptop crashed and I am recovering.

  I tried to import the bookmarks in the folder of file but get stunned by bookmarks.  I have read the procedures but still do not understand.

  I have a lot of Web sites in my favorites folder.

  Is there an easy way to import from the file folder to the IE8?

  I am very confused right now.

  Thank you, Carol

  Hi Bruce

  Thanks for the quick response.  I have actually had copied favorites of Documents and Settings in My Documents I had too much data to back up.  I copied the files to My Documents/Favorites on the Documents and settings/favourites and all is good!

  Thanks for all your help.  Nice day.  :)

  Carol

• Import of files .mts not nested in the camera original folder structure

  The short version:

  Is it possible to import .mts files already copied on a hard disk, without keeping the structure of folders of the camera, in first Pro CS5.5?

  The long version:

  I recently bought an iMac. Years, I edited video on Windows using Sony Vegas and Vegas Home Studio. My camera, the Panasonic Lumix TS2, sequences AVCHD video. Vegas has no problem import and edit files .mts AVCHD from a camera or a hard drive so it was not until I tried to edit a video in Premiere Pro, received the error message "type cuts not supported" and has done some research that I realized the folder structure is Christiane both at work with AVCHD. From what I can tell, the files must be in the PRIVATE sector > AVCHD > BDMV > STREAM > Configuration xxxxxxx.mts to import via the media browser.

  Here's my situation, I have hundreds of .mts files in separate folders, delivered with the photos of the same day or event. I'm on an iMac i7, using an enabled version of first Pro CS5.5 of the Master Collection. Is it possible that I can import and edit these files natively? And in the future, is there a way around to transfer the entire folder structure whenever I want to copy the video files on my hard drive? I use the bridge to import photos and it will just extract the video files of the card and plop them in the same folder. Having to transfer the videos separately, sounds like a ridiculous job around in our modern era. Thanks for any help you can provide.

  AVCHD. MTS files should import just fine without the folder structure. You lose some metadata, code time and covering, but beyond that, the files themselves should work properly.

  You have the presets of AVCHD footage? It is possible that you have lost the ability to import material; PR has a bad habit (especially on Mac) to obtain the format-amnesia when you update. Recently updated to 5.5.2?

• transfer bookmarks of a 8 year old PowerBook G4 for a MacBook Pro - is - it an easy way?

  You just bought a MacBook Pro - used an old PowerBook G4 for 8 years. I'm setting up of my MacBook and would like to transfer my favorites in an easier way than going to each site Web and bookmarks. Can I use the article on synchronization between computers, firefox settings? If so, part 1 talks about game upward on my main computer - consider my MacBook Pro is NOW my main computer... or there at - it an easier way to do it?

  Hi milkbone,

  If you have decided to move to the new computer and don't use the old one, I'd take a glance article back up and restore the information contained in the Firefox profiles and restore bookmarks from a backup or move them to another computer .

  If you are still using the old one or if you using sync would be easier to transfer your data, you must enable Firefox Sync on your OLD computer first. Then you could sync all bookmarks to your new computer. After that, you can remove your old computer from synchronization if you do not use it.

  Hope this helps!

• Is there an easy way to print bookmarks Acrobat Pro 9.5

  Is there an easy way to print the bookmarks to a file Acrobat Acrobat Pro 9, 5?

  Is there an easy way to extend to all the headings?

  Thank you

  Here is something you can try:

  With your file open and assuming that he has all the settings of bookmarks:

  Simply export as HTML (file > export > HTML > I chose HTML 3.2). This should create a HTML file.

  Open the new HTML file and the first thing you see is a list of all bookmarks!

  It worked for me (I have 9 Adobe). Let me know if it works for you.

  PS After the copy of the list, I pasted in Word and changed the bullets to numbers by clicking on one of the chips by selecting numbering!

• An easy way to remove floating ads when they appear (for example, not prevent it)?

  Usually I don't mind the ads on web pages. So, I feel strongly to use ad-blocking software to prevent any or all kinds of ads. But I don't mind the ads that float on web pages because they often block the view.

  Although some floating ads allow the user to close them, more pop ups or other types of malware, can appear after their closure.

  Yes, is there an easy way (an add-on, perhaps) to remove the floating ads after they appear and prevent them from generating more ads or to show again when the page is reloaded?

  Maybe something like "CTRL + Alt + left click on ' applied to the floating ads?

  I don't want to turn off scripts and Flash.

  There are Add-ons that, but they don't have not been updated in a long time, while they might have problems.

  • https://addons.Mozilla.org/firefox/addon/zaqwes_remover/
  • https://addons.Mozilla.org/firefox/addon/remove-it-permanently/
  • https://addons.Mozilla.org/firefox/addon/clean-the-Junk/
  • https://addons.Mozilla.org/firefox/addon/Nuke-anything-enhanced/

  Earlier, I would recommend Adblock Plus, used as follows:

  1. Install Adblock more.
     • https://addons.Mozilla.org/firefox/addon/Adblock-Plus/
  2. Click on Adblock Plus toolbar icon and click Filter Preferences.
  3. Subscriptions, right-click each subscription tab and choose Remove. Now, Adblock Plus is not blocking anything.
  4. Install the element hidden assistance made to Adblock Plus.
     • https://addons.Mozilla.org/firefox/addon/elemhidehelper/
  5. Now when you want to hide something on a web page, click on Adblock Plus toolbar icon and choose "select an item to hide."
  6. Web page preview is acceptable, click the button add element hiding rule. For advanced use, see the following pages.
     • https://adblockplus.org/en/filters#elemhide
     • https://developer.Mozilla.org/docs/Web/CSS/reference#selectors

• Is there an easy way to delete the original files replicated by iTunes game downloads?

  I have a library of great music stored on my Mac. When I subscribed to iTunes game, most of my songs appear in iTunes with the icon 'cloud' indicating that I was able to download the track, even if the files were stored locally in my iTunes music library.

  For various reasons, I wanted iTunes to recognize the local mapping to all my music files, so I selected my entire music library in iTunes, right click and choose 'download '. Now, it seems that all the files are uploaded to iTunes as a high quality files, which is great, but if I look in the folder for each album in my iTunes music library, I see now two copies of each song - the original file and the new higher quality file.

  In iTunes, I see only an entry for each track, so it's good, but the additional files are eating plenty of disk space unnecessarily. I don't want to go into every single album folder and delete old files to original, so I hope there is an easier way to remove.

  Help?

  Try http://dougscripts.com/itunes/scripts/ss.php?sp=musicfolderfilesnotadded2

  TT2

• Is there an easy way to view all the elements of the façade which are hidden in a pragmatic way?

  Hello

  There were some cases where the new indicator that I created was actually overlaps the other indicator which was hidden at the time of development.

  I knew only when the program is operating normally and the hidden indicator will appear on the front panel.

  It would be great if I can see all the elements of hidden façade while in development mode.

  Is there an easy way to do this or am I missing something?

  Thank you.

  Steve

  See here: http://forums.ni.com/t5/LabVIEW/Darren-s-Weekly-Nugget-08-14-2006/m-p/403788

  You can also choose to vote in favour of this idea: http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Show-all-hidden-controls-and-indicators/idi-p/1113431

• must be an easier way...

  Here's a screenshot of my block diagram. I keep thinking that there must be an easier way to fill values other than cluster using these two nested for loops, but I can't think one. I am taking 4 rows of an array of bytes and fill of the items in cluster 0-5 to 6 bits of rank 0, cluster items 6-12 with six bits of rank 1, elements of cluster 13-18 with 6 bits of rank 2, then the remaining elements of the 3 cluster with 3 bits of tier 3. Any suggestions or is this the best way? I seem to think there must be something more simple. I have to see this end up in the rube goldberg section easily

  

  
  

• Is there an easy way for me to export trimmed clips from one location?

  Is there an easy way for me to export trimmed clips from one location?

  I prepared her and filled with a bunch of garbage separate of footage in Premiere Pro session intro - I need to send these clips adjusted to another studio that does not use adobe in post.

  You can export a single item in the project Panel and choose Clip range as your Source in and out, but you can't do this for multiple clips. Could you create a sequence from each of these locations and then export an XML sequences to then send to the other studio, or want to send them the small clips adjusted if you do not have to send the raw images?

  Alternatively, if you use a version of first after the introduction of the multiple clip export option, you can do this with additional manual work. You can select each clip in your tray and choose to make a subelement and click the check box restrict stripes to a subelement Boundries. Then, you can select all your subitems in your bin and exports since the project Panel.

• Is there an easy way to copy and rename an entire project?

  I created a RoboHelp 10 project group with the Windows version of our software for bird watching.

  I need an exact copy that I can then edit and publish with the Mac version of our software.

  Is there an easy way to copy and rename an entire project?

  Hello

  Just open Windows Explorer to the location of your project. (Index, click on a topic in your project manager and choose the option to Explore)

  Copy the folder of the project by using Explorer and paste to create a new copy.

  In RoboHelp, open the copy, click file > rename project.

  See you soon... Rick

• Is there an easy way to convert 2 colors in Illustrator CS6?

  I have a black and gold logo in Illustrator and I want to change it so that what is now black gold and what is now gold will be black.

  I tried to select fill even, then the Eyedropper to change gold to black, but then I realized that if I do the same thing with the black, I'll also choose what I just changed.

  I hope that there is an easy way around this that I don't see. The only thing I can think is maybe paste the items that I've changed in another layer and locking.

  But is there a way easier without having to move to another layer?

  Edit > edit colors > Recolor art. Drag one of the right hand color bars you want to swap with.

  Like this:

  

  The stuff on the left change things on the right.

• Is there an easy way to convert graphics (imported from the common library) Composite path?

  Hi all

  This is my problem:

  I had sex with any common library grapch, and I would like to convert to a Composite path. I had been using a manual method (double click on the image and copy the compound path, and then stick it on my main layer).

  question:

  Is there an easy way to convert graphics (imported from the common library) Composite path? as a shortcut, or other?

  Image:

  

  Thank you before and waiting for your responses

  With the object selected, choose Modify > symbol > Break Apart. Then click Modify > ungroup.

• There must be an easier way!

  Maybe it's the lack of good sleep in recent weeks, or simply to watch the long code, but it seems that there should be an easier way to do it, but it escapes me. Here is the code example. I have 48 initial statements of the YEW, with nested IF statements. The first outter, IF the declaration has 47 IF statements nested, the second statement IF outter has 46 IF statements nested, etc.. I have shortened the code for readability.
  
  If (thisItem.p0 == true) {}
  P00. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 1) {}
  thisItem.p1 = true;
  P01. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 2) {}
  thisItem.p2 = true;
  P02. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 3) {}
  thisItem.p3 = true;
  P03. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 4) {}
  thisItem.p4 = true;
  P04. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 5) {}
  thisItem.p5 = true;
  P05. AddItem (thisItem);
  }
  }
  }
  }
  }
  }
  If (thisItem.p1 == true) {}
  P01. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 1) {}
  thisItem.p2 = true;
  P02. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 2) {}
  thisItem.p3 = true;
  P03. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 3) {}
  thisItem.p4 = true;
  P04. AddItem (thisItem);
  
  If (thisItem.ItemSlots > = 4) {}
  thisItem.p5 = true;
  P05. AddItem (thisItem);
  }
  }
  }
  }
  }

  This--->

  If (thisItem.ItemSlots > = 1) {}
  thisItem.p1 = true;
  P01. AddItem (thisItem);

  If (thisItem.ItemSlots > = 2) {}
  thisItem.p2 = true;
  P02. AddItem (thisItem);

  If (thisItem.ItemSlots > = 3) {}
  thisItem.p3 = true;
  P03. AddItem (thisItem);

  If (thisItem.ItemSlots > = 4) {}
  thisItem.p4 = true;
  P04. AddItem (thisItem);

  If (thisItem.ItemSlots > = 5) {}
  thisItem.p5 = true;
  P05. AddItem (thisItem);

  ------------------------

  and this--->

  for (var i: int = 0; i<>
  thisItem [("p" + i)] = true;
  This [("P0" + i)]. AddItem (thisItem);
  }

  must be the same, (I have not tested the syntaxt throughoutly, but it should work)

• My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews?

  My m4v videos to view a preview, but now it is a generic white band 'film' with a blue dot. I used to fly over the icon and preview would play. Previews were an easy way of the video ID. How can I restore previews? OS X El Capitan 10.11.4

  I'm ' dropped in ' the answer! By changing the name of the ".m4v" to ".mov" file preview is now fixed! Billy just got lucky...