An error occurred in consolidating the discs: msg.snapshot.error - DUPLICATEDISK.

Similar Questions

• vCenter esx 5.5 - consolidate the snapshot fails with an error occurred by consolidating the discs: msg.snapshot.error - NOTFOUND?

  I don't know why is this error?

  I got an error that the virtual disk space was low tool and my vm has been automatically turned off.  I scoured the data store and I saw old clichés that were very important which could be removed.

  I went into the Snapshot Manager and has tried deleting them and started getting the error msg.snapshot.error - NOTFOUND.

  The clichés that I deleted since the Snapshot Manager always appear when I browse the data store, but are locked.

  I really need to be able to consolidate these pictures in the parent company.  100 GB free on the store of data right now.

  If I try to take a new snapshot it fails and says: an error has occurred when taking a snapshot: msg.disklib.OPENPARENT.

  I also noticed after the fact that my hard drive is pointing to the most recent snapshot rather than to the parent.

  I think if I edit the .vmx file and change it so that it points to the parent would be the load, but then I will not lose the clichés?

  I like to keep at least the most recent roll in parent company snapshot.

  Any ideas?

  Thank you!

  Erin

  Hello!

  Thanks for the reply.  Unfortunately, a part of the problem is that the data store was running out of space.  If I didn't have space or time to try a clone.

  I did a reboot and after that has been able to update the CID to get the right string after I changed the hard drive to point to the base file, power, created a snapshot, turned off and pointed to the hard drive in the last snapshot.

  But there was a corrupt, one in the list since my VM corrupted after all the snapshots consolidated (+ 6 hours later).

  I didn't have a lot of time to continue to troubleshoot or try a clone on another virtual server, we have little space so I started from scratch.

  Fortunately, I discovered that my backups of the data have been very well, I so reinstalled Windows and started from scratch.

  Thanks for the suggestion though!

  Hope this helps someone else because I just watched as he went to work, and I don't know if a clone would have gotten it going or not.

  Erin

• Error occurred in making the disc of recovery with Dell backup and recovery

  Mr President.

  When I was doing a System recovery DVD with Dell backup and recovery when all steps were completed and finally when he was checking the disc a dialog box appears showing "AN ERROR has OCCURRED". How to get rid of this error?

  Please answer fast. Any suggestions will be appreciated

  Thank you

  Hey Himanshu Teli,

  Please provide the model of your operating system and Dell. I would also recommend that you try a flash instead of a DVD disc.

• Cannot use disk, error: Disc Copier could not find a CD-ROM drive supported. You will not be able to make copies of the disc to another.

  Original title: follow question Winsows XP repair

  I get following messages is displayed when I try to use disk functions.  #1 API can not see all CD ROMS in the system, please check to see if they are properly plugged...

  #2 disc copy could not find a CD-ROM drive supported.  You will not be able to make copies of the disc to another.

  Should I take the modem to a computer repair shop to get this repaired?

  Hello

  I suggest to refer to the procedure described in the following article and check the status of the issue.

  Error messages occur when you run Easy CD Creator in Windows XP.

  http://support.Microsoft.com/kb/285910

• Data error (cyclic redundancy check) and the disc does not work correctly

  Original title: I installed the mainly broadcasts music on this disc many times without probs, now I get "data error (cyclic redundancy check)".

  I installed it now mainly music programs of this pile of disc of times with no probs, I get the error message "data error (cyclic redundancy check)" on all the programs on this disc, when I put the disc in the drive of my pc seems to be a bit slower than normal too. one of the programs is fruityloops 8, if I click on install, but click on fruityloops 8 engine I get ' ZipMsgXX.res is probably not related to the executable string ID missing is 11036' as I have 6 fruity, I thought that it could install using Installer 6 fruity but it wont... someone help...

  Hi shaunrollett,

  Control of cyclic redundancy or CRC errors, usually occur when copying data to a CD or DVD. The error may indicate a bad block, a damaged disc or a hardware problem.

  You can check whether or not the CD works in another computer.

  You can try to run the Fixit mentioned in the link below and check if it helps to reolve the question:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problem

  Hope this information is useful.

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• FAILED: An error occurred during conversion: "the operation encountered a network error.

  Hello world.

  I used VMware Converter Standalone 6.0 converter Server 2003 on Hyper-V to host ESX to vCenter.

  Hyper-V have IP: 10.132.2.200

  vCenter have IP: 10.132.2.177

  ESXi host have IP: 10.132.2.192

  We have no political firewall for 3 IP this. All ports are open in the firewall.

  But when I convertering 1% who have the error with the State: FAILED: an error occurred during conversion: 'the operation encountered a network error'

  So can you help me fix this case?

  Best regards.
  

  Hello Hongchuong

  It really looks like a secure network communication. You write no firewall blocks but we will go into more detail. The connection must be established from the Hyper-V (10.132.2.200) host to the ESXi (10.132.2.192) host on port 902, as in log lines:

  2015 07-12 T 14: 03:46.634 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] establishment nfc connect to host 10.132.2.192 port 902

  2015 07-12 T 14: 03:47.193 + 07:00 info vmware-converter-agent [03900] [sub Originator@6876 = task 1] disc Sysimgbase_Nfc_PutFile source: Disks\Hyp2K3-Goc_5110F977-7064-4B81-9452-BDAE36EE9C9D.avhd hard E:\MayAo_Hyp\Hyp2K3-LT\Virtual, target disc [Datastore-SAN2] Hyp2K3-HDND/Hyp2K3 - HDND.vmdk

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] NfcFile_SendMessage [NFC ERROR]: data send failed:

  2015 07-12 T 14: 06:44.992 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] the operation encountered a network error - failed to send of data message

  2015 07-12 T 14: 06:45.056 + 07:00 error vmware-converter-agent [03900] [sub Originator@6876 = task-1] Sysimgbase_Nfc_PutFile failed in H2MDiskCloneMgr with nfcError "the operation encountered a network error" (error code: 3)

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] SSL: SSL unknown error

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = Default] [, 0] [NFC ERROR] NfcNetTcpWrite: bwritten:-1

  2015 07-12 T 14: 06:45.069 + 07:00 WARNING vmware-converter-agent [03900] [sub Originator@6876 = default] [, 0] NfcSendMessage [NFC ERROR]: send failed: NFC_NETWORK_ERROR

  An easy way to try the connectivity is telnet from the Hyper-V host to ESX host on port 902

  I see you have also tried again to destination 10.132.2.191 with the same error.  It is possible that Hyper-V firewall is blocking.

  HTH

  Plamen

• message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  message from startup problem: imac photos: er zich een has doing voorgedaan bij het recovering bevoegdheden van (an error occurred in restoring the powers)

  Do you mean, there is an error message about problems with access rights? (toegangsrechten?)

  Where your photo library is stored? In your pictures folder, or on an external drive?

  You share the photo library with another user?

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• CompactRIO RT (:-65589) error code: error or warning occurred when writing the following shared Variable)

  Hello

  is anyone know this error Code:-65589?

  This error says:

  Shared in environmental_logger.vi variable
  This error or warning occurred when writing the following shared Variable:
  CompactRIO Target\Mod2\DO1 \\RT
  \\localhost\Mod2\DO1

  My cRIO9073 has 3 modules:

  MOD1: 9203 HAVE,

  MOD2: 9472 DO,

  Mod3: 9265 AO.

  When I delete all States and run only the first "init" State where I put DO0 = true and DO1 = false, I get this error. What could be?

  I think we need more information about your project - you can take a screenshot of your project LabVIEW RT target and the location of the shared variables? What is the configuration of the shared variable? Do you use the cRIO Scan Engine or FPGA (or both?)? How you deploy your library of variables? You should also zip to the top of your project and join, if you can.

  Here are some articles about the possible causes:

  http://digital.NI.com/public.nsf/allkb/C32368835ADAEE19862578500067A8C4

  http://digital.NI.com/public.nsf/allkb/7B52091D2FFA01EC86257C32005DF935

• Win2k3 Server IIS SChannel event 36871 "a fatal error occurred when creating the SSL server credential information."

  To make a long story short, I went to use client software that I use a few times a week and it would not connect to the server, complaining not found or number of SSL.  When research various dcom, schannel errors errors in the event logs and a few others, I systematically over the last 24 hours cleared up the boot is so now clean (no time starting network on startup and no message on the service could not start).  It seems that something has happened a month ago after that the server crashed where at least the first DCOM messaged presented themselves, but everything has been working well until it didn't.  The dcom patches end up having to do with the ...\rsa\machinekeys (and the way that it) had a few "account unknown" in it, I cleaned everything that (at a time since I removed all items in this folder, but then put their subsequent return (by crushing all except 2 after creating a new certificate), had to reinstall virtual server and iis 6) , at some point as well.  In any case, I'm at the point where everything works (no event log errors/etc) from startup until you try to connect to the IIS 6 Server using https:... at this point, you get the event SChannel 36871 "a fatal error occurred when creating the SSL server credential information." (no additional information) is connected and the client browser cannot access the site (you can keep trying and it does not work but no event log entry more).  So that's where I'm sitting, http: works fine, https: No.  Certificate appears in the default Web site correct, said valid and possesses the private key, port 443 is there, all addresses by default, netstat shows port 443 same process id as the port 80.  I can't find a copy of SSLDiag do test to see if that prove something?

  So I need help what is not going to get this new job of fixing.  What should I do?

  Thank you!

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  I hope that helps!

• The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?

  The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

  On Thu, 20 Sep 2012 14:41:30 + 0000, Stephen_403 wrote:

  The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

  No, at least not by us.

  Open a hard drive for some reason any at all can be done in special
  laboratory as parameters. Something else will destroy the disk.

  There are companies trying to recover data from broken disks,
  and they are sometimes successful. And who knows, maybe they
  sometimes use methods such as what you describe.

  But if you plan to use such a company, know what they
  are all very expensive. It does not for most people.

  For the future, if you have files you want to be sure are not
  lost, make sure to have in place a backup procedure on a regular basis the
  external media player.

  Ken Blake, Microsoft MVP

• When you install age of empires 3 it progresses quite far ahead, it reports an error and to check whether or not the sound.bar file on the disc (cd 2).

  I ask to check if the file sound.bar is on is the cd or not. I'm unable to explore the disc on my computer to determine if the file is there or not. Overall, the progress bar indicates that the installation was almost complete. There are some light scratches on the cd. All solutions? I'm unable to explore the disc on my computer to determine if the file is there or not. Overall, the progress bar indicates that installation was almost over before I got this error message. Is there any way to get this file, as I suspect the cd is damaged as it has a few light scratches on the cd. All solutions?

  Hello

  1. don't you try to install the game in the other computer with the same disc?

  If you are not able to install the same game on another computer it clearly seems to be a problem is with the CD, then I would you to see link and check if it helps.

  How to replace lost, broken, or lack of Microsoft software or hardware: http://support.microsoft.com/kb/326246/en-gb

  For your information:

  Error message when you install a program of mapping or game from Microsoft: http://support.microsoft.com/kb/258496

  Hope this information is useful.

• When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details"

  When you send an e-mail using Outlook Express, I immediately get this message; "Some errors occurred while processing the requested tasks. Please see the list of errors below for more details". Unfortunately, there are no errors listed below and the green bar is frozen on the screen. The message remains in my Outbox and repeated again and again sending. There is absolutely no record and file sent in my sent box. TIA - Ernie

  You have apparent dbx file corruption. A common problem.
   
  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  General precautions for Outlook Express:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.
   
  Compact often as specified above.
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx 

• CD Player Help - without a disc in the reader msg trying to write a file in a new CD

  Original title: cd player help - without a disc in the reader msg

  CD player help - I have xp prof and get msg, no disc in drive for insert, when I try to save the file to a cd.  It is only on a new cd. I have a cd that I saved info in in the past and if I put this cd in the player it will open and I am able to write to her, but every time I try a new cd the msg comes that there is no cd in the drive. This has also happened when I put a dvd in the drive, it does not open it.  -confused and need easy to understand help. Thank you

  Thanks for the comments.  At least you things partially market.

  My guess is that it is your hardware which is a failure rather than a software problem.

  You can read these two articles Wikipedia: CD-R and CD-RW