Analog interface for PXI 7811

Similar Questions

• How can I change the configuration for the output channels analog on a PXI-6704?

  I can't seem to understand how to access the configuration of the channels to the outputs analog (channel 33 and 35) for PXI-6704.

  This piece of test equipment is out of tolerance and must be calibrated.

  I have followed the procedure of calibration http://www.ni.com/pdf/manuals/374081b.pdf, but am getting hung up on step 8, where it is said to repeat steps 4-7 when changing the _cal_ao_current_offset. I can't figure out how to open this channel because it is not listed as a physical channel for step 5.

  I'm using Labview 7.1

  Thank you

  Hello! What you need to do is to add 'Internal channels' to your list of channels, so you can choose the _cal_ao_current_offset or _cal_ao_voltage_offset.  This is done through the drop-down list channel right click and select "I/o name of screening...". ».  There will be a check box that says 'Internal channels' and will provide you with all available internal channels to enter your vi Create Channel.  I have attached some photos illustrating how to do. See you soon!

• Apple a day will include Messages in the web interface for iCloud?

  Hello world

  That I really like to write my text Messages on my iMac and MacBook Pro, I was wondering if, one day, we will be able to send text messages from the web interface for iCloud.

  I mean, the 'Messages' application might appear with all the others.

  

  During my short time with an Android phone, I used text powerful app. I had to associate the application phone on a Google account and connect to the web interface powerful text with the same Google account.

  It was pretty cool and useful.

  So, I'm thinking the solution to include 'Messages' to iCloud so that non-iMac users could write SMS with their keyboard too.

  THX.

  This is a user to user community, Apple will not read your comments, if you have any suggestions that you think might improve iCloud, you can send Apple your your comments here.

• Why is there no user interface for moving the cache locations/profile?

  OK, so it took me a long time to find how to move the location of the cache and the reason is that it is done by an entry that does not exist originally, so a user need to know the channel config even magically set it.
  (this is browser.cache.disk.parent_directory for those in the same waters as me) and it still did not move the location of the profile...
  To change your profile location? The doc only that talks on this subject here:
  http://KB.mozillazine.org/Moving_your_profile_folder
  and it does not work so well for me (i.e. all) but why have I not copy and change things? It is created automatically the first time you start so FF cannot use the same method to create a new profile in an empty space?

  And my real question: is there a valid reason, that there is no element of the user interface to set the location of the profile cache directories?

  There never was a user interface for these parameters - Mozilla is "stingy" about adding prefs that will be only once required by the installation of the user interface. Also, I assume that the developers are convinced that a power user who thinks that even on the displacement of the cache will be searching for instructions on how to do it. (BTW, when you move the cache profile is moved to the folder path profile, its origin "local settings" folder - thus it is automatically moved out of APP DATA.) You can still use this pref to put the cache exactly where you want. I use a small partition for the TEMPORARY files and the cache of Firefox, so they don't one of my biggest readers logics frag.)

  Regarding the difficulties with a profile in motion, developers have threatened to remove Firefox profiles altogether for the last 3 years or 4 and WONTFIX had no Bug filed all improve or add new features to the Profile Manager. This will probably happen this year some time.

  Between you and me, there is a new Profile Manager application just went Beta, which will probably "be released" just as the existing profile manager is extracted from Firefox. It is very schweet and is always at the point where the developers are in response to reports of bugs on features to include and adding the items that are important. I have tabled a minor Bug on the characters allowed in a profile name, which was fixed in 3 or 4 weeks.
  
  https://developer.Mozilla.org/en/Profile_Manager
  
  https://wiki.Mozilla.org/Auto-Tools/projects/ProfileManager
  
  http://FTP.Mozilla.org/pub/mozilla.org/utilities/ProfileManager/1.0_beta1/
  
  You must have Windows Visual C++ 2010 redistributable installed for the application of the Profile Manager XUL Runner to work right now. I hope that this will change very soon, and all the necessary files will be included in the Zip package.

• LabVIEW Interface for installation of the Arduino

  I want to install the LabVIEW Interface for Arduino Toolkit, so I can control an Arduino Uno R3.  Say the instructions to download and install the VIPM and then you can download and install the Toolkit through the VIPM.  The only problem is that workplace of our company doesn't have access to the internet for security reasons, so the VIPM will not be able to download the Toolkit.  How can I download manually the Toolbox for a laptop without LabVIEW, save it on a usb key, then install manually on the workstation with LabVIEW?  Any help would be greatly appreciated.

  I asked the very question sometime back and here is the answer I received. I decided to use another computer on the network for the work of the Arduino, so I never tried what was suggested.

  Let us know how it turns out.

• Analog input for NI EVS-1463RT loging

  Hello
  Im trying to connect an audio input OR EVS - 1463 RT (LabVIEW RT App). I thought that the audio input behave as "analog input" for example DAQmx Device.

  Is there a driver to control the acquisition on audio input NI EVS-1463RT? I need only to connect the sound signal and save it for the next treatment.

  Thanks for the replies

  Jan

  In LVRT there is absolutely no way to use these audio jacks. I think they're working on the Windows version however.

• How to make interface for sending email

  How to make the interface for sending electronic mail.

  Just send a simple message and attach a file only.

  The outgoing server and incoming ip and user name with password is known.

  Thank you

  Example prog to send Emails through gmail.

• programming for PXI-6071e with SCXI1125

  Dear all,

  I connected the SCXI-1001 chassis with card Conditioning SCXI-1125 and SCXI-1327 block with PXI-6071E PXI-8176 with SH1006868 cable controller card. I chose the SCB-100 for PXI-6071 accessories, as there is no option to select SH1006868. I connected the Thermocouple on the SCXI-1327 block terminals.

  I am new to LabView, can someone guide me how to program. If anyone have example program, it will be useful to start learning

  Thanking you

  Concerning

  -Vishnu

  I don't think that you can select your accessory cables. Only the blocks for DAQ cards will be available on your list. Instead of the SCB-100, you can select the terminal box 1327? For starters, labview has a number of application examples. Go to the Help menu and select 'Search examples' then search for thermocouple. There should be examples on how to acquire tension of a thermocouple, graphic of your data readings, etc..

• Many DAQ cards synchronize hardware for PXI

  I recently went through the process of getting several PCI DAQ cards in a computer and synchronize them together using a RTSI cable.  I just bought two similar cards in PXI.  I had to add a RTSI cable DAQmx devices manually in the measurement and automation software, and connect the cable with the PCI cards.  I want to just make sure that I don't have to do the same with the PXI cards because there is no necessary RTSI cable for PXI.

  Thanks for any help,

  Mike

  The PXI chassis has backplane triggering and clock lines so that you don't need the RTSI cable.

• DeskJet 1510: Macbook Pro 2015 have no usb b female interface for Deskjet 1510

  Hi, Expert, Macbook Pro 2015 do not have usb female interface for Deskjet 1510 b, do I know what cable I can buy to connect? Thank you

  Sorry, I made mistake. I recently to get this product to a friend. When I saw the printer usb cable, I guess that USB Type B male interface must be connect to the MAC and USB Type A is for printer. I was wrong. Thank you for the support.

• User interface for the touch and trackball design

  Hello everyone

  Design the user interface for my ap, and I have a question.

  My access point has a lot of button image.

  I can imagine the ImageButton for touch screen and trackball.

  I have known that using touchevent for touchscreen and trackwheelClick for the trackball.

  When I use both in an application, the access point is not make sence to use,

  If this is not the case, can I know the user device or not doesn't have trackball or both.

  My code:

  final BitmapField bf_Projection = new BitmapField (B_Projection, Field.FOCUSABLE) {}
  {} public void onFocus (int direction)
  this.setBitmap (B_Projection_Down);
  }
  public void onUnfocus() {}
  this.setBitmap (B_Projection);
  }
  {public boolean trackwheelClick (int status, int time)
  UiApplication.getUiApplication () .pushScreen (p_Screen);
  this.setBitmap (B_Projection);
  Returns true;
  }

  protected boolean touchEvent (TouchEvent message) {}
  int x = message.getX (1);
  int y = message.getY (1);
  Make sure that the point is in this area
  If (x < 0="" ||="" y=""> < 0="" ||="" x=""> getExtent () .width: y > getExtent () .height) {}
  Return super.touchEvent (message);
  }
  {Switch (message.getEvent ())}
  case TouchEvent.DOWN:
  this.setBitmap (B_Projection_Down);
  break;
  case TouchEvent.UP:
  this.setBitmap (B_Projection);
  break;
  case TouchEvent.CLICK:
  case TouchEvent.UNCLICK:
  UiApplication.getUiApplication () .pushScreen (p_Screen);
  this.setBitmap (B_Projection);
  break;
  }
  Return super.touchEvent (message);
  }
  };

  Clintliu wrote:

  case TouchEvent.CLICK:
  case TouchEvent.UNCLICK:
  UiApplication.getUiApplication () .pushScreen (p_Screen);
  this.setBitmap (B_Projection);
  break;

  These two make no sense at all - either treat CLICK or UNCLICK because otherwise you will push the screen twice.

  That being said - the best way is to ignore the fact touchEvent() exists and replace just the click of navigation and/or uncheck.  They will work correctly for navigation in trackpad and touchscreen / click.

  One of the problems with the touchscreen is that if you click on a non-focus field or in empty space currently target field will get the event.  You can override the entire event (return super.touchEvent () in any case) DOWN carefully to detect this situation.

• ESA how to pin a specific traffic on a specific interface for mail flow?

  We have an ESA Ironport virtualized and normally he was running an interface on our DMZ, 192.168.1.200.

  On this DMZ, the firewall allows only the 10.1.1.10 to 192.168.1.200 internal mail server mail flow to and from, more obviously other traffic as DNS and web for filter updates.

  However, I would like to integrate with AD, so for this reason I had to connect to another interface on our LAN in vmware, and in config to Ironport ESA I implemented this interface on the local network of 10.1.1.200.  I have all services off the power on this interface, in order to access the web INTERFACE for spam or configuration still goes to the original interface of 192.168.1.200.

  Now, I've been able to communicate to the announcement and make an LDAP query, which is excellent, but now the incoming emails are hitting our exchange of the new 10.1.1.200 instead of the original 192.168.1.200 interface.

  When exchange sends an e-mail to, it still sends to 192.168.1.200, and Ironport addresses correctly.  But what Ironport receives by email is now send to Exchange on the new internal IP address.

  Question is can pin it so that Ironport works the 192.168.1.200 (management), the interface for all SNMP traffic?  The ONLY reason I added an internal data interface 1 is to query AD.

  Is it safe or not?

  Thank you!

  Hey Keith,.

  The details provided, I pray that ESA uses the right interface to send emails to your exchanges (192.168.1.200) instead of 10.1.1.200.

  (Assuming that the 2 interfaces, one for generally more traffic, another for only AD queries.)

  I advise you to change the following.

  GUI > System Admin > LDAP > change the LDAP interface for usage (for queries) to your new 10.1.1.200 (if you haven't already done so).

  Then, CLI > deliveryconfig

  Change the interface used for deliveries of mail to the 192.168.1.200 interface (chosen by name).

  I think that should correct the behavior.

  Kind regards

  Matthew

• How can I disable hierarchical keywording in LR 5?  The preference of the interface for the AutoComplete is turned off and I still get California &gt; United States &gt; country.  I want to just Caliofrnia.

  How can I disable hierarchical keywords in Lightroom?  The preference of the Interface for full Auto is already disabled, but I still get California > United States > North America when all I need is the California.

  You must be signed in order to respond to messages.

  One of the reasons why you can see the hierarchical format for the key words are you have the word 'California' duplicate key in your keyword list.

  Lightroom display these files directly with.< parent-keywords"="" appended="" to="" the="">

  IE California< state="">< country ="" and="" california="">< united="">

  If you re - keyword photos so that they use only one version and then delete it key word duplicate of your keyword list and then she displays just "California".

  Bruce

• Design of interfaces for a JMS XML queue data

  Hello
  
  I'm new on ODI and I am working on implementing XML JMS technology to recover data to a queue. I have read the Oracle documentation on that dozens of times, but I can't seem to figure out how to create a proper workflow.
  In the doc, I know that these two sentences are the key:
  
  -The first interface for reading the XML from the MOM message must define SYNCHRO_JMS_TO_XML LKM option to yes. This option will create and load the XML schema for the message comes from the queue or a topic.
  -L' last interface should commit to the message consumption by setting COMMIT_JMS_READ to yes
  
  However I don't see what that means in practice, in addition to the fact that we have several interfaces that do the work.
  
  Thanks in advance for any resource link (for which I've already spent days of searching) or lights on this subject.
  Mary

  953326 wrote:
  Hello

  I'm new on ODI and I am working on implementing XML JMS technology to recover data to a queue. I have read the Oracle documentation on that dozens of times, but I can't seem to figure out how to create a proper workflow.
  In the doc, I know that these two sentences are the key:

  -The first interface for reading the XML from the MOM message must define SYNCHRO_JMS_TO_XML LKM option to yes. This option will create and load the XML schema for the message comes from the queue or a topic.
  -L' last interface should commit to the message consumption by setting COMMIT_JMS_READ to yes

  However I don't see what that means in practice, in addition to the fact that we have several interfaces that do the work.

  Hi Mary,

  Your interpretation is correct.
  Most of the time, we have several interface that makes the JMS to load DB within a packet of ODI.
  In such cases interface 1st reading of the XML of the MOM message must define SYNCHRO_JMS_TO_XML LKM option to Yes and last interface should commit to the consumption of the message by assigning the COMMIT_JMS_READ YES.

  If you have only 1 interface then set option SYNCHRO_JMS_TO_XML LKM Yes and COMMIT_JMS_READ Yes.
  I hope this helps.

  Thank you
  Fati

• Could not find an appropriate interface for the private interconnection range

  I'm going to install RAC 11.2.0.2 on two nodes REDHAT linux.
  
  I ran runcluvfy pre crsinst, he gave me warning as follows:
  Could not find an appropriate interface for the private interconnection range.
  
  I asked her to use a different subnet as public interconnection for interconnecting private as well as the name / etc/hosts also set private ip addresses. Private ip address is not defined in the DNS system.
  
  .runInstaller also not will pop up the Ethernet because private interconnection over choice of network.
  
  What to do to solve this problem?
  
  Thanks in advance.

  You can temporarily change the mask of 255.255.255.0 on eth3 and see if YES recognizes eth3?