Analysis of the performance of the DB

Similar Questions

• A premium of 6700 Officejet do an analysis of the inverted image?

  Hello

  I have a few documents where the background is black and the writing is white.  I want to scan and to reverse the image so that the background is white and the writing is black.  Is this possible with a premium of 6700 Officejet and the accompanying software?  Do I need a scanner dedicated with the best software to do?  Thanks in advance for your help.

  Gary

  Hello garyg45,

  Welcome to the HP Forums!

  I understand that you want to perform a "reverse image analysis" with the Officejet 6700 Premium. I will do my best to help you! What is your operating system on your computer? Windows or Mac?

  How is the printer connected? USB or wireless?

  The HP software does not come with this feature, but there are of the workarounds you can try. If you have a Windows computer, you can use Windows Paint, which has an option to "Invert color" and "invert selection". You can scan a document into paint using the "from camera or Scanner" or you can copy and paste an image. I'll give you a document from HP on this step here. Click on 'How to Scan without HP software. Then follow this document How to invert the colors in painting.

  Please post your results, I'll be looking forward to hear from you.

• Analysis of the BSOD

  Hi all

  I've been making BSOD every few days.  I analyzed a memory full dump and found specific things that lead me to think that I can be infected by malware.  As I am new to the analysis of the BSOD, I'd be happy to get your insight as it seems logical or not and what other steps can I take by completing the analysis.  Here's the info from the analysis:
  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: fffff680000198c0, memory referenced
  Arg2: 0000000000000000, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff80002de9a66, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: fffff680000198c0

  CURRENT_IRQL: 0

  FAULTING_IP:
  NT! MiGetWorkingSetInfo + 286
  fffff800'02de9a66 488b 0408 mov rax, qword ptr [rax + rcx]

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0XA

  Nom_processus: svchost.exe

  These two related AVGIDSFilter.sys ID Application activity monitor filter driver. by AVG Technologies

  I notice that you have of moy.
  AVG can be a cause of BSOD.
  Please remove and replace it with Microsoft Security Essentials
  http://www.Avg.com/ww-en/utilities'] download tools and utilities | AVG worldwide

  http://www.Microsoft.com/security_essentials/ "] Microsoft Security Essentials - free Antivirus for Windows"

  Error checking 24, {c08a5, 0, 0, 0}
  Probably caused by: avgidsfiltera.sys (avgidsfiltera + 1 b 88)

• On Mac, how to scan multiple pages to a pdf file using the analysis of the glass?

  Mac OS x v10. 7, how to set up analysis of the HP Officejet 6500 multiple pages in a single pdf of the file by using the analysis of the glass?

  I couldn't find the box uncheck the box to 'Save as individual file' to the Mac.

  My reccomendation is to use the Image Capture in your Applications folder.  Choose your scanner to the left, then click on "Show details" on the bottom.

  Choose the PDF format, then check the box for "combine several pages into single file" (or similar words).

• The analysis of the non-numeric characters in a string

  Hello

  I am communicating a robot to LabVIEW (2013) via TCP/IP and sockets. The robot is the server, and LV is the customer.

  I start with the target data in this format (in a string):

  "[0 ~ 100 ~ 0] ~ [0.96593 ~-0.25882 ~ 0 ~ 0] ~ [1 ~ 0 ~ 0 ~ 0] ~ [150 ~ 50]."

  [X, Y, Z], [Q1, Q2, Q3, Q4], [C1, C4, C6, Cx], [TCPVel, OrientVel] except replacement ',' (comma) with a ' ~ ' (tilde) because I load the target data in a spreadsheet which is a comma-delimited file.

  In LV, I take this string, the analysis of the chain and split individual items. I then pulled the singular elements as unique, 32-bit of real numbers. I take each one and convert them individually to a string, concatenate them and send them to the robot. The robot decompresses these raw bytes individually and converts them to a target of robot (position in space).

  I train (BT) check if the user has sent a bad character (non-digital) in the target data. Example of this is:

  [- 50 ~-150 ~ 0] ~ [0.96593 ~-0 ] [B2has5D882 ~ 0 ~ 0] ~ [1 ~-1 ~ 0 ~ 0] ~ [150 ~ 50]

  Now in BT, when I'm scanning the chain, these bad character becomes the entire element to zero and everything else then to zero as well. See attachment for example screen similar.

  My question is, my VI, I can analyze all non-numeric characters (that are inside the parentheses and characters that are NOT a ' ~ ' (tilde))? In this way, I can always get this item numbers and do not have this element or other items turn to zero?

  Thanks in advance for any help!

  Sorry for the question of the test

  SM

  
  

• Analysis of the particle pixel measurments - how to get the co - ADR of the first pixel

  Hello

  I'm developing some labview code to measure particles.

  I'm having trouble with the analysis of the particle VI. I'm not sure what values of table, I need the table to return the co - ADR of the first pixel (more to the left the higher pixel) and also any useful information!

  I joined the program, I worked on that. To test I'm loading a black bitmap with some white circles on it.

  Thank you

  Jack

  Right click on the entry of measurement in pixels and select create constant. This will paste an empty array of metrics on your chart. Click on and select the first pixel X and the first pixel Y parameters, as shown below.

  

• Analysis of the error in normal mode string

  Hi all

  Suddenly, my analysis of the chain has stopped working and started giving me this error. The read string ends up being something like 2.86E - 4 or similar. When I run mode highlighted everything works fine and it interprets the number very well but when he's not in highlight mode it returns an error. Not sure why since it is just a number to convert. Any help? I have attached the error and the highlight mode version. Thank you!

  First guess: synchronization problem. Especially since you said it works in highlight mode. Specifically, when you run culminating point mode you expect probably not long enough before trying to read, and the loop will immediately detect any byte on serial port. This delay function there will not guarantee a delay of 1 second between writing and reading. There is no dependence on the data - a rookie mistake. Use an image sequence or time to late VI to have clusters of error wiring through establishing the data dependence.

• The good examples of the construction and analysis of the data in bytes?

  Hi all

  Very soon, I'll have to find a way to build messages to bytes to send to a serial port and a serial port to receive and review to the basis of events out of...

  However, before I delve into the complexities of the serial port communication and VISA, etc... I would just like to see some examples of working mainly with data of bytes.

  I found how to get a digital constant the byte value... the binary representations signed and unsigned, etc..

  However, if I could find a simple example or tutorial just to see how to assemble the byte-code... and how to analyze it, it would prove invaluable for me to study.  I've never really worked at the byte level / binary front... and a few examples with LV would be very practical.

  Anyone know of any good links out there something like this?

  I'll eventually be sending 5 bytes out I need to build... and will receive 9 bytes in, each of which I need to parse out and respond...

  Links or information GREATLY appreciated.  I'm pretty decent analysis of the chains, real expressions, etc... but never worked with the construction and analysis of the data in bytes.

  Thank you in advance,

  Cayenne

  If you are comfortable with binary data, you can use the Boolean charts. Look at the number of table Boolean and array Boolean functions numbers. Instead of masking with an AND, you can easy to use array index to check a bit particular.

• The analysis of the Variables of e/s channel properties

  I have a situation in which I would like to configure the Daq on a cRIO since an interface of configuration on a Windows host. In particular, I would like to get IO addresses Variable for all analytical engine channels configured on the cRIO. The Setup program runs on the Windows host and impossible to deploy any demon on the RT which could question the material. He needs run as if the cRIO is not present.

  The configuration program is part of the same project as the cRIO, so my thought was to analyse the project to find corresponding topics. Here's a post that does something very similar:

  https://decibel.NI.com/content/docs/doc-16630

  However, this has several problems. This example was written in 2011. I am using 2015. Apparently, the properties have changed since then. Children' find' (it is no longer named "children []") does not give me the chassis on my 9068 reference. Instead, I could use the property "Items Owned []", which gives a bunch of things, and then I search the TypeString of these things until I have find one that is "Chassis". Fair enough. Then the ref chassis gives me the Modules and the Modules of give me the channels. Seems pretty good. But all I get are the names of channel. I can't find all the properties that define the type of module or the direction of IO. For example, I would like to know if a variable is a Boolean or real, and if it is a path of entry or exit. You can deduct that the names 'standards', if the project has not been changed to allow giving them a meaningful name to create or. But it looks like there should be a way to find these properties directly.

  Any ideas?

  TIA,

  DaveT

  I think that the analysis of the project tree is a quite fragile strategy that you should know already. AFAIK the OR sanctioned for this sort of thing for a few years now is to use the API of the System Configuration. Yes, it's a pretty involved API and need you a little time to learn how to get the specific information you are interested in. Fortunately there are some examples that you can use to start with.

• The analysis of the data of a string of series

  Alert LabVIEW Express 7

  Sorry, all I have to work with and there is no budget at the moment to upgrade.

  Hello, I am in phase 1 (data transfer reliable to labview) 24/7 of my small Miettinen, who is to display and record data environmental Lab 24/7 our Fisher 02-403 digital barometer that has a serial port. In fact, it came with the software, but no one here seems to like use it so I'll try to find something more intuitive. I can't find any info at all about I/O with this device, so I'm reverse engineering. I'm sure that you cannot write anything to this device only read.

  I started with the connection of the device and the interface with NOR measure and automation and received the following string: P,43,1019,44,31,01,0023.0\r\n.

  I tried to use the Labview 7 Express e/s Companion Instrument, selected 1 COMM, changed the timeout to 5000 (trial and error), added a step reading and analysis, ran and received the following string: P, 43,0999, 44,41, 01,0018.0, XX. After well guess, I determined that the values I have in bold change with the environment and the other 3 are always the same idea 9no what they represent). Alphabetical 1 in bold represents the tendency of climate S sunny = P = C sunny cloudy = etc., the value 2 is the atmospheric pressure in hPa, the 3rd is % relative humidity and the last is the temperature in Deg. C.

  At first, I tried to create simply chips for data I want and operation loop the wizard of e/s in awhile, but often error messages obtained suggesting that I need to define all the tokens in the string. I did it and it worked, then I opened the front panel to access the underlying schemas whence I came with the attached VI. I left this race for more than 24 hours, no error, seems good.

  My question on this forum is, can I simplify this VI losing a part of the analysis of the data that I don't need at this point?

  Please let me know if you can not access this VI maybe I can do a screenshot or something.

  Thank you

  Doug

  Yes, it can be simplified to just a bit.

  

  Since you are new to LabVIEW, you can start with the basic tutorial.

• I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

  Original title: there was an error of analysis of the data on your system

  I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

  In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

  It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

  Could there be other issues behind this failure?
  Thanks in advance

  Hello

  Follow these methods and check if that helps.

  Method 1:

  I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  Method 2:

  Refer to step 2 and step 4 from the link provided below:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

   

   

  Method 3:

  I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

  For use with different media windows easy transfer, you can click on this link for steps to follow:

   

  http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

   

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

• Computer stops when I run a program as a complete analysis of the Norton System or a program to convert video.

  When I launch a program like the complete analysis of the Norton System or a program to convert video on a DVD from my computer stops without warning.  Yes, I cleaned and blew all the dust inside.  Y at - it a program that will monitor the heat inside that is compatible with Vista?

  Hi, what type of program you use to convert video?

  Also, take a look at the following site Web de Norton:

  http://community.Norton.com/T5/Norton-360/full-scan-shuts-down-or-freezes-my-computer/TD-p/469270

• Drive CD/DVD not visible in BIOS, Device Manager or Windows Explorer - only during the analysis of the system.

  Until a few days ago, this problem didn't exist - I know.  My CD/DVD drive is no longer recognized in Windows Explorer, BIOS or Device Manager.  It doesn't, however, appears briefly in Windows Explorer in the analysis of the security of the computer.  It allows to open/close, etc.  and when it is visible, I am able to open the drive and see the contents of the CD.  Then it disappears again.  The light flashes indicating that he works and I can hear it trying to read the CD.  I uninstalled iTunes because I read somewhere that this may have been the issue - but that didn't work.  I tried the system restore, registry cleaners, removal of upper/lower case filters from the registry, used the program Fixit found on the site Web of Microsofts etc and still no luck.  Any ideas?  The computer is a gateway SX2850 (?) with Windows 7 Home Premium installed.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• error analysis in the file c:\program files (x 86) \hp\digital imaging\bin\hpqscloc\1033.xml

  Hi all..

  I had this problem for a while now, but now its got to the point where I can't scan anything now or the other.

  If I try to click on the HP Solution Center, all I get is a popup saying "error analysis in the file c:\program files (x 86) \hp\digital imaging\bin\hpqscloc\1033.xml.

  I had a link to the screen so that I could use my scanner, but now it will not work, and I tried uninstalling and reinstalling every driver HP & file I can find, but I'm not getting anywhere.  Any ideas?

  IM using a laptop Toshiba Satellite C660D-1 and can connect to my HP Officejet 6500 has more (E710 n) by usb and wireless network.

  IM using 64 bit Win 7 Home Premium, Service Pack 1, with an AMD E - 450 APU Radeon HD Graphics and 6 GB of ram.

  Its a cell phone works, so reformatting wouldn't the best solution, even if it's as well as I would have originally been.

  Any other suggestions would be appreciated

  Thanks in advance

  Roy

  Hi DavRao

  Thanks for the answer... Sorry that I won't be back for you so far, I ended up going out on the road all week.

  I had already seen the advice below on the first page I've found in research to help, but I forgot to mention that I had already tried.

  I have a drive and downloaded another copy of my drivers, but at no time I found L4uninstall.exe

  Also, I do not consider the L1, L2 and L3 uninstall that I've seen mentioned previously...

  I found the uninslaller on the HP Web sites, and runing it me have once step 1, a second round was stage 2, stage 3, stage 4.

  By now, I got desperate and tried everything I thought that could help to remove all traces of services in msconfig, uninstall everything related to HP, I even backed up and then deleted (in desperation) and the entered boot records of HP.

  Nothing helps. Uninstall would start to remove the drivers, but just before it finished every time, it would start to recede and that should give up then.

  I ran a system restore to before you start tweaking options, etc, just so that everything was back to normal, but still does not...

  Then downloaded and installed "Iobit Advanced Uninstaller" (100% free to use)

  http://www.iobit.com/advanceduninstaller.php

  This allows to uninstall all references of HP and its first rotation used the regular unilstall sequence and didn't, but then he gave me the choice of force uninstall...

  He gave me options of backup/backup so that if things went wrong, it could be cancelled... and it all uninstalled... Then authorized registry references and a set much more that I never would have found manually.

  After that restart 99% of HP had disappeared...  I then used CCleaner (100% free to use)

  http://www.Piriform.com/CCleaner

  It cleaned all the cookies for leftovers, abandoned the entries in registry etc...

  I was on the moon...

  HP full software downloaded again, just to be sure, I got later and he ran...

  It was the same version that I had often tried to install above all that I had been unable to remove, but this time, the options and the stadiums were completely different, it was as if my laptop had never seen a HP printer before and has been learning new.

  Installed perfectly, (with all updates and shopping addons unchecked)

  My scanner now works on the whish network wireless its NEVER done in almost 2 years.

  All the drivers are up to date, where as before, I often saw up to 10 versions of my printer all the tag errors, even if the printer would work for basic operations...

  IM happy now IM 100% healed...

  All this thanks to 2 bits of free software that I am now keeping the hand on lol...

  Hope this helps someone else with similar issues

  Roy

  Fan of HP printer, HP software hater

• Problem attaching text file of inventory analysis for the process of conflict for Oct 2014 CPU

  All,

  Subject: Oracle 11.2.0.3.0 db SPU, SPARC 64-bit, opatch Version is 11.2.0.3.3.

  Newbie trying to application of the patch (SPU)... like I am at the step to attach the text of the inventory file to run the analysis of the conflict process, I get the message:

  FUP-RF-01: unable to recover the file: Please RΘessayer.

  
  

  I pulled down the file inventory from the opatch/lsinv and placed directory on my desktop windows 7 when I want to scan. The platform is appropriate and Oct2014 patch (19271438) is displayed correctly with the appropriate platform.

  
  

  Any help would be greatly appreciated.

  
  

  Thanks in advance.

  
  

  rG
  

  Can paste you your exact commands and errors

  concerning

  Pravin

• If the analysis of the discourse is not included in Premier Pro, which product Adobe has it?

  If the analysis of the speech is no longer included in Premier Pro, which product did Adobe?

  The current version has an area of discourse analysis in metadata, but it does not work as it does in any tutorial I could find.

  Lynda.com does not include something on this subject in its 2015 cc tutorials.

  Of course, some products Abobe has?

  Intercostal salvation,

  Welcome to the Adobe forums.

  Analysis of speech feature is available in Premiere pro cc version. After that, it has been deleted from the latest versions of Premiere Pro.

  Please check this:

  https://helpx.Adobe.com/Premiere-Pro/using/speech-analysis.html

  You can download Premiere pro cc version of your application client creative cloud. (Follow to install the previous version)

  http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

  Concerning

  Shiphrah Singh