Analysis over the HDMI interface incorrectly detected as digital television

Similar Questions

• GRE and IPSEC VPN tunnel over the same interface

  My client is currently connected to a service provider of call through a GRE Tunnel over IPSEC. They chose to move all connections to a VPN site-to-site traditional behind a firewall, here, to your corp office.  As the questions says, is possible for me to put in place the VPN site to site on the same router? Interface Tunnelx both ethernet have the same encryption card assigned to the destination router.  I thought that traffic could divide by identification of traffic 'interesting '.  Thanks for all the ideas, suggestions

  Ray

  Ray

  Thanks for the additional information. It takes so that the existing entries in ACL 101 remain so the existing tunnel will still work. And you have to add entries that will allow the new tunnel. Editing an ACL that is actively filtering traffic can get complicated. Here is a technique that I use sometimes.

  -create a new access list (perhaps ACL 102 assuming that 102 is not already in use).

  -Copy the entries of ACL 101 to 102 and add additional entries you need in places appropriate in the ACL.

  -Once the new version of the ACL is complete in the config, then go tho the interface and change the ip access-group to point to the new ACL.

  This provides a transition that does not affect traffic. And he made it back to the original easy - especially if something does not work as expected in the new ACL.

  If the encryption of the remote card has an entry for GRE and a separate entrance for the IPSec which is a good thing and should work. I guess card crypto for GRE entry specifies an access list that allows the GRE traffic and for IPSec crypto map entry points to a different access list that identifies the IP traffic is encrypted through the IPSec tunnel.

  HTH

  Rick

• Satego X 200-no sound when the HDMI connection is used

  Hello

  I got my Satego X 200 a year ago and since yesterday I try to use the HDMI interface to connect to an LCD TV. I get a brilliant picture, but no sound at all. Is there anything that I do not take into account? I googled everything I could think of, but appropriat answers found.

  I'd appreciate any help.

  Thanks in advance

  So I'm back again with the solution that has helped so I hope it will help other users. I did an update of the BIOS, graphics card and HD Audio. The only thing that really helped was the driver / software update, I did it on the sound by updating the drivers and s/w them have downloaded directly from the Realtek Site. SO I hope this hepls someone else in the same situation.

• Where is the hdmi port?

  I have a 1205it TouchSmart 600 c.

  It's the http://h20000.www2.hp.com/bc/docs/support/SupportDocument/c02575520/c02162360.jpg port

  I do not open. The shooting, but nothing. How do I? I'm afraid to break

  Oh, are you talking about the three USB ports that are under a cover on the left side of the system? Those who are always included. If you remove the cover, they will be there. There are also two USB ports to the bottom left of the system.

  Ports of entry/output only option (I think) are those that are included in the game console - video display entries, including the HDMI interface.

  May I ask if there is a certain task you're trying to do with your computer? If you let us know what you try to use the input/output ports, because we might be able to help more easily.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• HP 8500 replaced, software does not detect printer even though I can't ping / connect to the web interface

  Windows 7 Pro 64

  Reference Dell

  Printer connected via ethernet

  software worked well until the printer has been replaced by HP under warranty

  in the new device, the screen of the wizard to set the time/language etc.

  Software HP does not detect the device and so I can not use all the features.

  I can connect to the printer via IP and also tried to put the TCP/IP port with printer static IP. Can I print using this, but the software "suite" does not detect the printer.

  Removed all software, cleaned the registry, removed the IP port, re-installed the software, does still not detect printer.

  Installed HP printer diags and it passes all the tests, but the suite software HP will always be NOT detect printer.

  Tried without firewall, tried with, still can ping printer, connect to the web interface, the static value, always the software does not detect the printer... so whats left to please other than an another replacement warranty which is used to solve the problem, as it is definitely bad coding in the suite.

  I also tried downloading drivers/full later on the HP site.

  Note that all windows updates are met, reconstruction is out of the question that it is a machine of the company and would almost take me 3-4 days to replace all the software on it (Sage, DW, COFFEE, HMRC).

  Hi-Dillion, Declan

• No signal is detected by the TV (KDL55HX800) using the HDMI source devices after the storm

  No signal detected by Sony Bravia TV (KDL55HX800-S/N 8114631) using the HDMI source devices after a storm last night.  Inputs RGB and components work fine.

  I have reset to factory default

  Installed the latest software/firmware from Sony site

  Checked the HDMI cables and selected the correct entries to the TV but even problem

  What could be the problem? At main / V Board? If so, what is the replacement P/N and where can buy it go? Link to store etc.

  Thanks in advance

  Hi mgkaundi!

• Scattered all over the hard drive downloads

  Trying to gain some control over the download process; I always put Firefox 'always ask me where to save files. For the first half of the life of FF that worked perfectly well. Save a file that is brought to the top of the corresponding dialog box, showing the location that I lasted sauvΘs and asking if I wanted to re-use that one.

  I can see how that might be a concern of privacy on a shared computer, such as the list of recently used files that comes with so many applications, but it has never been a concern for me.

  What bug the absolute $% & % $& % hell out of me is that FF now appears most goddawful of random places as suggestions. No matter hoe, I always use the same folder, FF suggests places that are literally everywhere in the hard disk without detectable rhyme or reason. I waited patiently for the development team correct everything they did to make FF cannot perform this simple operation he was quite able to reach with an apparent ease at least as far as his Phoenix days. But, alas, the output ' Let's Break everything "of the week schedule has never solved the problem.

  What gives? Someone at - it a fix for the problem? I know that there are affecting a lot of people just longer because I have heard the complaints.

  I added the Boolean preference. I wasn't sure if she would take effect without rebooting or not. Of course, I had not too long to wait... Crash-O-Matic pulled on plan and gave him the restart that he may or may not have needed.

  I used some time now and have not had the problem again. I will temporarily call this one resolved.

  Thank you, man. You can't imagine how crazy this thing driving me for how long.

• 13 d-0016nl envy: problems with the HDMI audio

  Dear Sirs,

  Due to some problems with an engineering program I had to reinstall Windows 10 on my laptop. The version of Windows is the same of the one installed on the laptop when I bought it. Before the laptop with HDMI audio installation worked fine, but then, while the HDMI video continues to work well, the audio turns off directly from the laptop, such that the cable was not connected.

  I tried to activate the 'reproduction devices' HDMI connection, but I'm not able to do this because it's as if the cable is not connected, and the HDMI connection icon appears as gray.

  I tried to update the audio driver, but it didn't work, so I tried to download and install the latest version of these drivers from the hp site but neither this worked.

  Can you help me? The laptop is quite new and I would like to solve this problem without using 2 different cables to connect also a speaker with a cable to the because the HDMI does not work as it should.

  Thanks in advance,

  Martina.

  You are the very welcome, Martina.

  It would be the graphics driver you need install the HDMI audio driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  http://ftp.HP.com/pub/SoftPaq/sp74501-75000/sp74569.exe

• Satellite P500 - cannot get sound through the HDMI to the TV

  Hello

  my system is a P500, win7 64 bit, ATI Mobility Radeon HD 4500/5100 Series video card, 4 meg RAM.

  I can't get sound via the HDMI to the TV,
  I've updated all the drivers.

  There is also no noise from interface SPDIF playback devices, it says Conexanant SmartAudio HD ready. Computer laptop speakers and headphone works.

  See you soon.

  Hello

  SPDIF or digital audio (HDMI) output is visible in Control Panel-> Sound-> tab reading?

  If so, mark this device as * default * and test the sound of the TV again.

  Greetings

• C7280 - cannot scan. Error message indicates another program has control over the device

  I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:

  'Cannot perform the function you have requested because another program has control over ice dev'.

  I have nothing else open and so I can't work on what program has control over the printer.

  C7280 Prtinter. Mac OS x 10.7.

  The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.

  So far, you have the choice of scanning with picture Capture or preview.  I'm sorry.

• Slow response from the user interface with acquisition of data of type long time

  Hi all

  I have a question to ask more out of curiosity than necessity right now. I've built a program that acquires data from the accelerometer and the Treaty in a number of ways: filtering, FFT, FRFS, things like that, but the answer of the UI is still slow, because I need a resolution of frequency of 0.2 Hz for my data domain, which means that the sample acquisition time is 5s and all this awaits before execution.

  My question is this: is there a way to completely isolate the user interface of data acquisition so that it responds immediately?

  I tried a design model of producer consumer with queues, but found everything to be always waiting for samples to be taken. Maybe it was exactly as I did.

  Thank you

  Phil

  If you need to sample for 5 seconds in order to have enough data to analyze, so unless you can "predict the future" and "knowing" the five seconds of data, simply wait for the data that arrives.  Using parallel loops of producer-consumer will allow data acquisition to proceed (for the next 5 seconds of data) while you do the analysis, but you still have to wait for the data to be analyzed.

  Note that the previous paragraph assumes you are collecting data in 5 seconds 'chunks' and analyze each "chunk" (independent) on arrival.  You could also do something like having a "second 5 sliding window" which moves, say, a second at a time, giving your FFT a finer resolution of 'time' (at the expense of their independence).  This would be a (slight) change in your loop of producer (you want to taste in 1 second pieces, accumulate 5 these pieces) and the consumption loop (start analyzing, spewing a FFT every second, while replacing the older "chunk" with the most recent - a queue with loss can do for you).

  Bob Schor

• Analysis of the error in normal mode string

  Hi all

  Suddenly, my analysis of the chain has stopped working and started giving me this error. The read string ends up being something like 2.86E - 4 or similar. When I run mode highlighted everything works fine and it interprets the number very well but when he's not in highlight mode it returns an error. Not sure why since it is just a number to convert. Any help? I have attached the error and the highlight mode version. Thank you!

  First guess: synchronization problem. Especially since you said it works in highlight mode. Specifically, when you run culminating point mode you expect probably not long enough before trying to read, and the loop will immediately detect any byte on serial port. This delay function there will not guarantee a delay of 1 second between writing and reading. There is no dependence on the data - a rookie mistake. Use an image sequence or time to late VI to have clusters of error wiring through establishing the data dependence.

• The analysis of the Variables of e/s channel properties

  I have a situation in which I would like to configure the Daq on a cRIO since an interface of configuration on a Windows host. In particular, I would like to get IO addresses Variable for all analytical engine channels configured on the cRIO. The Setup program runs on the Windows host and impossible to deploy any demon on the RT which could question the material. He needs run as if the cRIO is not present.

  The configuration program is part of the same project as the cRIO, so my thought was to analyse the project to find corresponding topics. Here's a post that does something very similar:

  https://decibel.NI.com/content/docs/doc-16630

  However, this has several problems. This example was written in 2011. I am using 2015. Apparently, the properties have changed since then. Children' find' (it is no longer named "children []") does not give me the chassis on my 9068 reference. Instead, I could use the property "Items Owned []", which gives a bunch of things, and then I search the TypeString of these things until I have find one that is "Chassis". Fair enough. Then the ref chassis gives me the Modules and the Modules of give me the channels. Seems pretty good. But all I get are the names of channel. I can't find all the properties that define the type of module or the direction of IO. For example, I would like to know if a variable is a Boolean or real, and if it is a path of entry or exit. You can deduct that the names 'standards', if the project has not been changed to allow giving them a meaningful name to create or. But it looks like there should be a way to find these properties directly.

  Any ideas?

  TIA,

  DaveT

  I think that the analysis of the project tree is a quite fragile strategy that you should know already. AFAIK the OR sanctioned for this sort of thing for a few years now is to use the API of the System Configuration. Yes, it's a pretty involved API and need you a little time to learn how to get the specific information you are interested in. Fortunately there are some examples that you can use to start with.