Satellite U200 - 161 Fingerprint software does not not with IE7

Similar Questions

• Satellite U200-122: Fingerprint Software does not work properly with Firefox

  When I first installed Firefox on my U200-122, everything worked fine. Connection to different sites by fingerprint has been problem free.

  After an update of firefox, the problems started. Rather than fill my username and pw, fingerprints of popups software and asks if I want to register for the site (which I did well before).

  Established since Fingerprint FF 2.0.0.6 ist is correctly installed. If I remove this configuration FF, get out, restart the installation, and come back in FF, it everything works fine... until the next reboot. I tried to install the latest version of the software of fingerprint - did not help.

  Any ideas?

  Thank you.
  Markus

  Hello

  According to your description of the update for firefox made mistakes
  Maybe the registry keys are corrupt
  I recommend you to remove the software of fingerprint.
  Then, restart the laptop and also erase the registry with freeware called CCleaner.
  Then run all updates of Firefox.
  After firefox update to restart the laptop and reinstall the fingerprint software.

  Good luck

• Fingerprint software does not recognize my fingerprints

  Hello

  I installed the 64-bit Windows 7 (using cd upgrade upgrade to win7 program)
  Installed all updates (windows)

  However, fingerprint software does not recognize my fingerprints-. -.
  The first two are fine, but the third party never works, it's the same story for all my fingers...

  I HAD the program works perfectly until I reinstalled my OS
  For some reason, I remember the same problem last time I had to reinstall, do not remember what I did to remedy

  any advice?
  Thank you for your time and help!

  Edit:

  To add a few details:
  It worked before
  The hardware is not the issue (he reads my fingers)
  It is software or just my DNA changes my fingerprints-. -.
  I can't remember which version of the software / I downloaded the last time, but I find the latest software online on this site and found

  In addition, the FACE program does not work either
  He was working before I reinstalled the operating system
  Is it just me or all the security programs like simply not me-. -.

  Hello

  In your case, I recommend you remove all traces of fingers first.
  Then, uninstall the software and clean the registry with CCleaner.
  Then download the new software for fingerprint for the computer laptop and Win 7
  After that, scan and configure the fingerprints once more.

  In regards to the face recognition software;
  You must uninstall this too and need to download the latest version of this software for Win 7

  Good luck

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Fingerprint Software does not work with Firefox after an update

  Hello

  the first thread that I started this topic is closed, so I have to make a new...

  As mentioned here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25776&TSTART=15

  Fingerprint Software no longer works with Firefox after updating the browser. Only by making the circumvention of the above thread it can be fixed. After the next update should be that any new... uninstall, reinstall... means a lot of time.

  Are there no real solution for this? For Firefox users, the fingerprint software is useless unless they all do the- and relocation on each update.

  There is no solution as the update of the utility of fingerprints or something like that!
  The solution is to remove and to reinstall Firefox to get it working with the utility of fingerprints!

  The update of Firefox damages registration of fingerprints in FF and therefore the new resettlement is necessary!
  If you want to know how this will be corrected in the FireFox browser, please contact support to Mozilla or the developer!

• Tecra M5 - Fingerprint software does not recognize the drive

  I have instaled new Windows 7 32 bit on my Tecra M5 - 12Z and I installed devices drivers provided by Toshiba. All devices were recognized even properly fingerprint reader, but the fingerprint software (Protector Suite QL) says that can't find the fingerprint reader.
  I tried with the driver for Windows Vista with the same result.

  What can I do? Thank you

  Hello

  I m not a Tecra owner, but you should try to reinstall the finger printer reader driver and software. It s worth a try! ;)

  Also check that the latest version of the BIOS is installed. You can download it on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com

  Good luck! :)

• Satellite U200: FN + F8 WLanHotkey does not work after the re - install

  On my Satellite U200, I had to reinstall and I installed correctly the shortcut utility wireless keyboard from the CD of tools and the site of drivers, but the key does nothing.

  I installed hotkey utilities and they are OK.
  The installer for it said it works and wireless and bluetooth devices work properly, but the fn + f8 does nothing.

  Any ideas?

  David

  What do you mean by reinstall?
  Have you used the Toshiba recovery disc or what have you?

  What operating system you have installed

• Fingerprint reader does not react anymore while the software seems to work (Thinkpad E530 Windows 10)

  I used logg in via the reader of fingerprints (windows 10) with no problems, now the fingerprint reader does not react anymore when I pull the finger. I managed to remove all the passwords in the password manager (still not sure about it as I don't really understand how all the components work together) hoping that would solve the problem. Not the fingerprint reader software keeps asking me to register a new finger. Everything seems to work fine (I can pick a finger to be registered, type my password windowns) until I asked me to draw the finger on the fingerprint reader: nothing happens! The indicator that shows how the finger was scanned shows nothing at all. Looks like the software works, but the fingerprint reader itself is dead. However, looking into the information system the "TouchStrip Fingerprint Sensor' (WBF mode advanced) seems to work fine.

  Help, please. I don't have any idea how to find out what's not here.

  Thank you very much for the tip! He works in fact :-). Even if it does not seem logical to me, as I never put it in place a front pin - and fingerprint reader work very well even without PIN code. But who cares - the main thing is it works now! So thanks a lot again :-)!

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• Even after the installation of the fingerprint scanner Scan fingerprint driver does not work

  I have hp pavilion dv6 7012tx and she was pre installed with windows 7, but now I have installed in windows 8 and my fingerprint reader does not work. I have installed finger print driver but its still does not, please help me.

  Thank you!!!

  Hey, I got it to work for me. Read what I posted in another thread

  (page 3) and see if it works for you also.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-J070CA-Windows-8-1-validity-fingerprint-reader/TD-p/3025495/highlight/true/page/3

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• DMM software does not.

  Why the digital multimeter (DMM) software does not work if the NI ELVISmx Instrument Launcher is?

  Initially, I installed subsequently myDAQ NI 2015 that included the NI ELVISmx Instrument Launcher containing the DMM software. Other pieces of software work however, the DMM stalls immediately after starting with a NI Instruments loading bar.

  I tried the repair option of software specifically for the NI ELVISmx driver and also tried wiping clean and reinstall fees. By receiving the same result.

  
  

• HP Probook s 4540: fingerprint reader does not

  Hello

  Problem: fingerprint - Windows journal reader under does not have the ability to connect via the fingerprint reader.

  Overview: after installing the drivers of the fingerprint on the HP site and thanks to the HP protection tools to register successfully to fingerprints, I tried to log in via this method, but the Windows Connect screen does not display this option. Device Manager correctly identifies and shows the fingerprint sensor - however, the Control Panel does no detection of biometric devices.

  I really need help with this problem. Details of what steps I took trying to make the scanner work are given below.

  Specs:

  1) 4540 probook s

  (2) Windows 7 64 bit

  (3) i5 - 3210 m, 1 GB Hd 7650 m, 4 GB at 1333 Mhz, 750 GB 5400 RPM, VFS 491 fingerprint reader.

  Details of the problem and the steps of my work to install the drivers:

  After a new installation of Windows 7, I went on the site of HP driver to download the latest drivers for Probook s 4540:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5229457&...

  I installed the drivers in roughly in this order:

  drivers ethernet controller 1) realtek.

  drivers audio 2),

  (3) the chipset and USB 3.0 drivers (but not the Intel MEI driver)

  (4) Intel video driver: a problem such that the pilots were not allowed to install. After you disable switchable graphics in the bios, I was able to get these drivers to install.

  (5) AMD video drivers: installed after graphic driver intel HD - installed but Catalyst Control Center was not displayed. Then I reactivated switchable graphics in the BIOS, re-installed these drivers and CCC was now available.

  (6) support for HP keyboard shortcut

  (7) HP Universal camera driver

  (8) fingerprint sensor fingerprint validity

  (9) Synaptics Touchpad driver

  (10) Atheros wifi & bluetooth

  (11) Jmicron card reader

  After driver installation, I installed the HP protection tools. According to request a reboot of the PC, which I did-, he asked for the setting up security etc... Part of this pocess was the registration of fingerprints - successful. However, log off / restart of windows, an option to connect with the fingerprint reader does not appear in the Windows login screen.

  I open the control panel and found there wasn't that no biometric device only tab, even if the Device Manager showed biometric sensor, device and validity (VFS 491). I then uninstall HP protect tools and driver validity sensor fingerprint, and made sure that these services are running:

  -Credential Manager

  -Remote Procedure Call (RPC)

  DCOM Server process Launcher-

  RPC end point mapper-

  -Windows Biometric Service

  Plug-and-Play

  Then as suggested in another post on the forum, I installed first of all this:http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe , then the drivers of the validity of 4540 s drivers page, then HP protection tools.

  After the reboot HP protect tools as before to register my fingerprints, but still no windows login prompt came to connect with fingerprints. However, a change after installtion of http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55109.exe that has been in Control Panel it is now a tab for biometric devices. However, it is said that windows did not find it all installed biometric devices. A picture is attached showing the Device Manager and Control Panel!

  Please HP offer a solution. Thank you!

  

  OK problem solved. I don't know if it is related to the HP windows 7 system essential updates driver installation and Intel MEI or not - but I install these.

  What has really worked probably was it - > install the drivers of fingerprint and then the HP protection tools. Once rebooted, open HP tools protect, then return to the administration in the lower right corner-> the administration Console-> increase of security system-> tick windows login security and your done. Now, you will be able to connect through fingerprints registered.