Analytics to extend for creation of star of HFM application schema

Similar Questions

• How to connect the Airport express as an Extender for airport extreme to El Capitan

  I have a model extreme A1521 airport and a model express airport A1392 and upgraded my OS to El Capitan. I want to use the express as an Extender for the extreme because my old House is long and has thick walls. My problem is that Airport utility will not 'see' the express, regardless of its proximity to the main router (extreme). I tried to move and reset.

  Of course, as soon as I get the utility to see, I need instructions on how to configure the express as a booster for my extreme.

  Any ideas?

  Unplug the Express and put it in the same room as the AirPort Extreme.

  Put power on the Express for a few minutes, then hold down the reset button on the back of the Express for 7 to 8 seconds and release.

  Allow a minute for the Express to restart

  

  Click the WiFI icon at the top of the screen of the Mac

  Look for an announcement of the new AirPort base station

  Click directly on the AirPort Express Terminal

  

  When you click on AirPort Express, the "Wizard" will open and take a few seconds to analyze things, and then see a screen that looks like the figure below, except that you can see your cameras.

  

  Type a short and simple name that you want to call the Express

  Click next

  The installation wizard will take care of everything for you

  When you see the message Setup is complete, unplug the Express and move to halfway between the AirPort Extreme and the area of the House that needs more coverage of wireless signal

  Turn on the Express and you're all set

  Important note... the Express to expand the quality of the signal it receives. About half of the potential speed on the entire nextwork is lost when you extend using a wireless connection between the airports.

  It would be much better if you could connect the Express to the extreme by using wired Ethernet wired, permanent, since there is no loss of signal via the Ethernet cable and there is always a lot of loss of signal through the air, the (thick walls especially) walls, ceilings, etc.

• If on a support contract extended for XP and 2003, will we receive MS16-077 as part of this support?

  * Original title: MS16-077

  Hello

  If on a support contract extended for XP and 2003, will we receive MS16-077 as part of this support?

  Try to determine what to do if the netbios disabled is not an option?

  It is a forum for specific consumers. If your TAM can answer your questions, you can find appropriate in the partner-online https://partnersupport.microsoft.com/ forums support

• I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else).

  Hi all.

  I just installed windows XP Pro on one of my computers. Now when installing, it showed me the main partition C and another extended partition (which was very small). Now windows gave me the option to install Windows on the C partition and it me has failed to use the extended partition, he said is reserved for windows. Now my problem is that it does give me an option to create a new partition (except on the extended unallowed was D). I want to divide the partion primary/basic C in 2 small, a C (primary with the OS) and G (extended-for everything else). I want only the OS on C. How do I do that? The PC has a single 79GB hard drive

  Hi DextrousDave,

  Refer to the article below to learn more about partitioning during the installation of Windows XP.

  How to partition and format a drive hard using the Windows XP Setup program

  http://support.Microsoft.com/kb/313348

• Media center immediately crashes when I try to add the extender for the Xbox 360

  I am running Windows 7 Home Premium.  I try to add the extender for the Xbox 360 to Windows Media Center. When I go to Media Center tasks and add an Extender, Media Center crashes immediately after I enter my Xbox console 8-digit code and click Next.  I have disabled the firewall of the router and firewall windows without success.  Restart the computer and the Xbox has not helped either.  Any suggestions that I can not yet put in place the Extender?

  Thank you.

  Hi Eric,.

  Thanks for posting your query in Microsoft Community Forum!

  According to the description of the problem, it seems that you have trouble connecting Xbox 360 extender for Windows Media Center.

  I will certainly help you with this issue.

  Here are some methods that you can try in order to solve the problem.

  Method 1: Disable the antivirus software and make sure.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Clear the Xbox 360 console system cache and check.

  http://support.Microsoft.com/kb/971755

  Method 3: Reconnect to Windows Media Center

  In the event that something happened to your connection, try to disconnect and reconnect to your Windows Media Center computer.

  To disconnect and reconnect to Windows Media Center:

  a. in the Xbox Dashboard, go to My Xbox and open Control Panel.
  b. Select computers, Windows Media Center.
  c. Select Disconnect.
  d. Select the installation program and follow the instructions on the screen to complete the Media Center Windows Installer.

  For more information, see the articles.

  www.Microsoft.com/Extender/Help

  Here is a demo for an Xbox 360 as an Extender for Windows Media Center unit setting http://Windows.Microsoft.com/en-us/Windows7/set-up-a-Windows-Media-Center-Extender
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Extenders/help/Extenders-firewalls.aspx

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• I need to install my Adobe Photoshop CS6 extended for mac (was: I)

  I need to install my Adobe Photoshop CS6 extended for mac os on my new computer. My last computer is broken and cannot acess nothing on it more. How can I do this?

  Please see this link:

  Download Creative Suite 6 applications

  I hope this helps.

  Concerning

  Megha Rawat

• Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  Hi, I bought a new laptop and I would like to install Photoshop 5.5 Extended for the new laptop computer. Something to consider before you begin to install?

  The reason is to avoid any inconvenience. What do I need to uninstall Photoshop beforehand?

  Thanks for the tips

  The mobile fact have separate start-up and data readers?  If so and the boot drive has limited space, you may want to consider relocation of things like bridges on the data disk cache.  I can't think another thing to consider from the start, however.

• Transfer the Software Photoshop CS6 extended for Windows Edition student from a Windows PC to a Mac

  I bought Photoshop CS6 extended for Windows Edition for my PC online student year last of Curry of PC World. I was told, at the time of purchase, that I would be able to transfer this software from my PC to a Macbook. I've now bought the Macbook and would like to transfer the software on my old Windows PC on my new Macbook. Please could I have assistance for that purpose. thank you!

  You don't mention who told you you can transfer the software, but I suspect it wasn't someone from Adobe.  Versions are platform-specific, so there is little chance of the installation of the version of Windows on a Mac without the use of a Windows emulator any.  Since it is CS6, you have the possibility to request an exchange of platform.  See the following...

  Product change or the language platform
  -----------------------------------

  You can exchange languages/platforms for a newer version product if you follow the instructions on the following link:

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Order-Product-Platform-Language-swap.htm

• Has anyone been able to Stand Up Essbase Analytics link (EAL) for financial management in version 11.1.2.2?

  Anyone no matter what chance standing places the link Analytics Essbase (EAL) for the purposes of financial management in 11.1.2.2?  We are at the point where when you click on 'Create the Bridge Application' it creates an application and a database in the EA and then blocks the Hyperion Essbase Analytics Link - Web Application Server.  Before this we were receiving an error NetRetry and NetDelay and increased, these parameters are do not receive the same mistakes.  I'm curious to know if 11.1.2.2 there's even a functional version of EAL or if we are out of luck until the next version.  Any comment is appreciated.

  FYI, we were able to raise the EAL and running after adding the following entries in the registry on our servers...

  Solution

  This timeout issue can be fixed by adding two TCP/IP registry settings, but first you must identify the customer who communicated with essbase when the time-out period exceeded so that you know which machine to add the settings.  If all the EAL and EMP components are installed on a single machine, while the machine would also host the client.  If the products are installed in a distributed environment, you determine the client machine depending on how the Essbase EAL server component is defined.

  The URL of the APS is part of the Analytics Server Essbase in EAL definition link.

  If (APS URL) value is "incorporated" means that the application EAL server communicates via the JAPI directly with the Essbase server. In this case the EAL AppServer is the client to the Essbase server. In this case, the following registry settings tcpip need to go on the computer running the application EAL server.

  If the value of (APS URL) is http://serverName:13080/aps/JAPI then the EAL Application Server communicates by way of Hyperion provider of Services (APS). In this case queries EAL proxies to and from the Essbase by APS Server. This means that the APS is the client to the Essbase server and registry settings tcpip need to go on the machine running Hyperion service provider.

  Once you have determined what machine acts as a customer of essbase, set the TcpTimedWaitDelay = 30 and MaxUserPort = 65534 settings via the windows registry.

  1. open the Windows registry.

  2. go in HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.

  3. Add the new DWORD value named "TcpTimedWaitDelay.
  -Right click and select Edit
  -Select "decimal" radio button, type 30.

  4. Add the new DWORD value called MaxUserPort
  -Right click and select Edit
  -Select "decimal" radio button, type 65534

  5. a server restart is necessary.

• Security event log getting the message "local computer maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries. System and application logs do not receive messages

  PC is Windows XP.  The server is Windows 2000.  I have administrative rights on both machines.

  On getting PC security event log do message "local computer, maybe not the files of the necessary registry information or message DLL to display messages from a remote computer" for all entries.  System and application logs do not receive messages

  Hi carmol,.

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on TechNet forum.

  Please post your question in the Sub forum. Link: http://social.technet.microsoft.com/Forums/en-us/winserverManagement/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• How to activate the trace for request to define in oracle application?

  How to activate the trace for request to define in oracle application?

  Please see and steps/comments for 'Presentation of simultaneous program' in (Doc ID 1516355.1).

  Thank you

  Hussein

• Ho labor-intensive creative cloud, my of nelle App installate mi dice che devo acquistare - I bought the package creative cloud for €9.99 in the installed application but tells me that I have to buy? What should I do?

  Ho is he Creative Cloud pacchetto a €9.99 My App installate mi dice che devo acquistare nelle? Cosa devo fare?

  I bought the package creative cloud for €9.99 in the installed application but tells me that I have to buy? What should I do?

  Please see this FAQ if it asks you to try or buy when you already bought:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• can I understand my Aplications more elderly for example CS4 Creative Cloud Desktop Application?

  can I understand my Aplications more elderly for example CS4 Creative Cloud Desktop Application?

  You should be able to install them on the same machine, but they would not managed programs of CC.

• Unable to kill the task of Consolidation for HFM application

  The user is unable to kill the task of Consolidation in HFM application. Consolidation process that lasts 2 minutes did evidence of State that execution of @79 % for 4-6 hours. The user ID is a configuration manager, to lock the data and unlock the provisions of common data Services. The task button in the list of running tasks is not enabled. Our support team has helped users access which is not as able to stop the task. Please Note Access Admin is limited and not allowed for these tasks.

  I would check the HFM log to see if you find anything referring to blocked documents locked.

  If your HFM application is killed in the middle of consolidating or perform other activities that requires him to "lock" a memory segment in the database, that "lock" is maintained on these data points when the application restarts.

  If you then try to make an another codification and it hits one of these points of data locked, it will sit there for a very long time waiting for the "lock" erase.

  I forgot the exact error message that you will find in the newspaper AND I forgot the time-out; However, it sucks having to wait over there.

  The other possibility that comes to mind is that really abandoned building and the State has not updated. (once more check the logs)

  Charles