Android apps have poor performance

Similar Questions

• SG300 switches have poor performance in layer 3?

  We have several switches SG300 Serices. We use them to route traffic to VLAN remote offices, the Internet connections and wireless access Points.

  In a remote office, we have a SG300-10 facility to route the HQ network and the remote office subnet. The SG300 is connected to the seat through fiber and contains several VLAN Tag. If I speed, tests on the fiber of the entrants Netwotk tag link I get decent performance, 80Mbs. If I switch to a networtk who is not priginating of the central administration and road SG300-10 package, I get poor performance. 15 - 20Mbs.

  I have Fireded until a new FW SG300 - 28 p v1.2.7.76. Added a HQ VLAN 101 and VLAN new, 1025. Mapped some Tagged and not marked for each ports.  Switch has been connected to the network of HQ as untagged VLAN 101.  I put a laptop on a unmarked port VLAN 101. Ran some tests, cam is back with 750-850Mbs. great.  Put the same computer laptop on a Port of 101 tag, set the NETWORK card for tag VLAN 101, same test, same speed, 750-850Mbs.

  I configured then laptop for tag VLAN 1025. Connected to the port 1025 VLAN scored. Done speed tests, the results were 15-20Mbs!

  Then I configured laptop for Untagged VLAN 1025. Connected to unagged port 1025 VLAN. Done speed tests, the results were 15-20Mbs!

  It was only the laptop and connect to the net on the SG300 - 28 p P.C. Why this device's performance is so poor when he needs to route?

  Other switches have v1.0.0.27 FW or FW v1.1.2.0. They have similar speed problems. All configured for layer 3.

  Thank you!

  Scott<>

  How are customer gateways and server configured?

  The default gateway for connecting devices should probably be that of the IVS, they are directly connected to. So if you have a server connecting to a SVI 192.168.1.100 then the gateway server should be 192.168.1.100, not a router upstream. Who can create a loop of road if the return circulation.

  -Tom
  Please mark replied messages useful

• BlackBerry Z10 "Make sure you have sufficient network coverage" when you run android app download.

  Hello

  I want to remove and reinstall some out of my android apps.

  After that deletion of apps, Apps icon was disappear, but I can not reinstall it because is is still in the system.

  At resolutions that download 'android activity '.

  But now all trying to download this application. I'm getting "Make sure you have sufficient network coverage" this error msg.

  I tried

  -Clear cache

  -Sufficient coverage

  -Plan data does not work as well.

  I need to go back a few apps very badly

  Help, please

  The issue of "network error" has been resolved, so please let me know if you are still having this error when you try to download or update applications using BlackBerry World. Thanks for your patience so that this issue has been studied.

• Illustrator draw android app says that it requires 4.3. I have a viking RCA pro 10.1 which is 5.0, but it says that my device is not compatible. Can anyone help with this?

  Illustrator draw android app says that it requires 4.3. I have a viking RCA pro 10.1 which is 5.0, but it says that my device is not compatible. Can anyone help with this?

  HI JBlessed,

  What is a Tablet? Because the draw is not yet supported on Android tablets.

  Sue.

• Android app brings is very slow

  Hi all

  So far, I brought an Android app to BB10 and it works fine. It is based on the client-server communication. However, I wore a new, which relies on the caching of files and stuff to database backup which makes large average andorid phones. However on BlackBerry Z10, which has excellent material is very slow and laggy. I have a suspisions one of the reasons is because litters applications rely on Android 2.3. But no experience or help Blackberry developers will be appreciated. Thanks in advance!

  Hello

  I just wanted to add that 10.2 has now gone gold! With this, you will get the Jelly Bean 4.2.2 runtime which includes a load of improvements to the gingerbread.

  I suspect that many of the concerns performance will be improved considerably.

  Justin

• Poor performance InternetExplorer9

  Hello

  I have my InternetExplorer9 on a clean Windows7 VM thinapped and have Veery poor performance when I run the finished app.
  I tried many things to increase the speed. My normal ie9 starts in 5 seconds, until it's on google.com, my thinapped however ie9
  needs about 10 seconds, even after the restart of the 5th. What I've tried so far is:

  -J' have compressed the ie9.exe when generating

  -J' put 'AutoStartServices = 0' in the Package.ini generating

  -J' put 'NetRelaunch = 0' and 'AutoStartServices = 0' in the Package.ini.

  -J' set the sandbox sand-path %appdata%\microsoft\windows\sendto and the local path (tried both)

  -J' deleted some unnecessary user-specific folders in the project path

  -J' got only InternetExplorer.exe as entry point

  I tried the last few steps of each constellation, but no finished package is better than the others. You have any other suggestions for

  My problem? (I use the Thinapp_4.7.2 by the way)

  Kind regards

  Tobias

  It doesn't matter as long as it is in the right section:

  [Compression]

  CompressionType = None

  [Segregation]

  DirectoryIsolationMode = merged

  [BuildOptions]

  OptimizeFor = mΘmoire

  DisableTransactionRegistry = 1

  I forgot to mention it, but there was a new feature of Internet Explorer 9: hardware acceleration.

  Change IE9 to disable hardware acceleration has helped me get better performance in my VDI environments.

  See:

  http://support.Microsoft.com/kb/2528233

  Go to Internet Options, advanced, check ""use the software instead of GPU rendering rendering "."

  Recover application or use sbmerge to update your project file.

  
  

• My email has been hacked and used to send Spam. I have to perform a virus check, or simply change the password?

  My email has been hacked and used to send Spam. I have to perform a virus check, or simply change the password?

  Do not install or run an anti virus app.

  How do you know that your email has been "hacked"? It is a common practice for spammers to forge an envoy from the e-mail address. It may be that your email address has been misused. There's nothing to do if this is the case for you. The spammer will soon pass and usurp another email address.

  It's a good idea to immediately change your password by email if someone would actually managed to access your e-mail account.

• How to refresh the playlist on Android app

  There is a setting in iTunes/Windows to update the library to the cloud, it sends recent changes, but how do update you the library on the Android app so it pulls down the updates pending in the cloud? I saw him run updates from time to time, but it seems to do it randomly.

  Android app 0.9.9 version (245)

  LG V10 performer Marshmallow 6.0

  I noticed most sync of things more in a few minutes, but things like play counts can take about 24 hours to synchronize with devices.

  Also in the music of Apple on Android, when you're in the high level view of playlists you can drag and pull down to refresh.

• Poor performance of Firefox after you apply the latest Microsoft Updates (Win 7 x 64); all solutions?

  Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E450 APU, Win 7 x 64, 8 GB RAM, SSD) who has always had pretty decent web browsing performance for a low end machine.

  At first, I blamed FF because poor performance coincided with the update to version 27, but now I think that the first cause to be a recent Microsoft Update. The reason is that my wife has a laptop with a same low-end APU (APU C60, hard drive 5400 RPM, 4 GB of RAM, Win 7 x 64), and she was getting much better performance with FF27 until I applied a backlog of some 90 + updates. Now she suffers from the same poor performance I am and she is pretty p * ssed at home.

  Interestingly, I have two WIn 7 x 64 Intel computers to office who have 27 FF and are fully patched, and performance are very good. Maybe this problem is specific to AMD APU.

  Any thoughts? I tried to turn off the backend Azure with some comments in this forum, but makes little or no difference.

  Thank you!

  Success! 32 FF seems to have solved my problems of performance. Thank you!

• How can I get the ePrint android app to print on the correct printer?

  My home network is a HP OfficeJet Pro 8500 A909 connected to the network wired (not wireless), and which is NOT active ePrint (I understand it does not support ePrint).

  The network also has a HP OfficeJet 7500 has yet once connected to the network by wire (not wireless) and what ePrint IS activated.

  Both printers are on my network 192.168.1.x behind a router, but not a proxy with separate IP addresses.

  If I send a print by the 7500 ePrint a email address, he goes out on the printer correct (7500).

  But If I print using the HP ePrint home & Biz Android app that shows to the 7500 a print out immediately on the 8500 - the incorrect printer. The app shows the type of printer as 8500, although she still bears the name of 7500 a correct.

  So I have 3 questions:

  1. How could I get the ePrint initiated by app printed to reach the 7500 a?

  I like the idea that it is possible to reach the 8500 and 7500 a remotely (when I discovered ePrint after buying the 7500 a I checked if the 8500 supported that to find it does not work). But, if I wanted to keep accidental remote printing to the 8500 then...

  1. How can I print on the 8500 email? (Remember, emailed still prints go to the 7500).
  2. How can I add the 7500 a the ePrint application so that I can print to the 7500 a still without disturbing the current app ePrint printer that prints to the 8500?

  Thanks for the tips you may have.

  Kevin

  Hi, I would like to try and answer your questions to the best of my ability:

  1. How could I get the ePrint initiated by app printed to reach the 7500 a?

  With the printed file you want displayed in the app, you must see the details of the printer at the bottom of the screen on your device. If the printer you want to print to is not presented, you can press the arrow to the right of the name of the printer and then select the printer at the top of the next screen. It will automatically search and find printers available on your network. Choose the printer you wish to print and it will update the printer selected at the time of printing. I've included a few screen shots of what it will look like

  

  1. How can I print on the 8500 email? (Remember, emailed still prints go to the 7500).

  Unfortunately, it is not possible to print on the 8500 email. The printer must have the ability of ePrint in order to be able to do this.

  1. How can I add the 7500 a the ePrint application so that I can print to the 7500 a still without disturbing the current app ePrint printer that prints to the 8500?

  See the answer to the first question

  If this does not solve your problem you can try to install the HP Home Network Diagnostic Utility tool to check that nothing is wrong with your network printers

• Unable to connect via the android app

  I am able to s n the community and through my browser to change account details but am unable to connect through my android app. Only, I have the app and do not have a computer to check anything. It has literally been working just this morning/yesterday night 3 am is the last time that I checked).
  ZTE Zmax, 4.4.2 android, model z970, version 5.5.0.11658. Gives error "unable to connect".

  I fixed the problem by uninstalling and reinstalling.

• LaserJet pro m127 fn: impossible to analyze by using HP all-in - One Printer Remote android app.

  Hello

  I use Hp all-in-One Printer Remote android app, Print function works fine but scanning works nor on my phone (4.4 KitKat) or Tablet (jelly bean 4.1).

  analysis function works by using my laptop (Windows 7)

  Help, please.

  Hi @EslamHassan

  Welcome to the Forums of HP's Support. I think that you have a question about the HP all-in-One Printer Remote app.

  The LaserJet M127fw printer is not a printer supported for the HP AiO application. I have included the HP printers and Mobile Printing Solutions support document for reference.

• Remove ReadyCloud android app

  I can connect to the web interface of ReadyCloud and only to find my 3 OS 6 NAS units. If I use the ReadyCloud android app, I also find a former NAS unit that once, I have used (or tried) but who has failed a few months ago. I tried to empty the cache and the data on my android device but when I connect the device to the app reappeared, showing the status of 'unknown '. I found a similar question posted by "n_damian" in early 2015, and apparently the solution was sent by PM and is not included in the view of the forum. Any help is appreciated; I clearly have a workaround, but it would be nice to have a fix in place! Thank you.

  Closing according to the PM.

• Why don't downaload music Android App in LG G3 D855?

  I can't downaload music Android App in LG G3 D855, because the game store tells me that I have incompatible device.

  Why? The device is running the latest version of android.

  He can drink only downloaded in Sony devices? Because I have a Sony Smartwath 3 and I would use this app for android by default player intead.

  Thanks in advance for your help.

  Yes, all native Sony applications are made only for the Xperia devices. This includes music, video, Album, etc.

• HP Mini 110-3530NR extremely poor performance on the Internet

  My HP Mini 110-3530NR Netbook has very poor performance on the Internet.  I use Windows 7 Starter.

  Say hello to new coppens1.  I apologize for the delay in my responses.  I have not received the normal e-mail notifications.

  When I had to go to msconfig earlier in our interactions you make sure that the Synaptics driver load with Windows?  Follow these steps to check.

  1. Click Start, type "msconfig" and press ENTER.
  2. Go to the Services tab and search for "HP Software Framework".  This should load with Windows for a lot of the HP software to work properly.
  3. Then go to the Startup tab and make sure that anything it either by "Synaptic" is loaded with Windows.
  4. Save your changes and exit msconfig.
  5. Then go to your touchpad settings and, even once, make sure that the settings are correct.
  6. Finally, restart the machine and make sure it works properly.

  I totally understand if you want to open a new thread as this covered a few topics!  Just make sure to send me a private message with the link so that I can make sure to help you here.

  I wish you a beautiful day JC!