Animation question: when adding new layers...

Similar Questions

• How to sort previously existing records, when adding new bookmarks?

  I use FF 8 on a Windows PC.

  I know that I can add new bookmarks by clicking on the icon star or by right-clicking and selecting bookmark this Page. However, these two just send the new bookmark in the folder of unsorted bookmarks . At the end of each session, I then go manually through said folder, sort newly added Favorites in named folders.

  On the drop-down menu Edit this bookmark , there is the option to send the new bookmark to: choose, Unsorted Bookmarks, bookmarks Menu, Bookmarks Toolbar. I do not use the bookmarks toolbar by choice. If I choose the Menu bookmarks as destination folder, I still have the task of 'end of session' sort manually bookmarks newly added. And if I go for the option of Choosing , the same options available just recycle.

  Is it possible to create new folders of pre-sorting, which correspond to the and with my list of files of existing bookmarks? So I don't have to go through the sort of "end of session"? Or is folder: drop down menu, just a redundant back to a previous version of FF? (If it's the latter, it may be something for developers remove.)

  Please don't refer me back to the help files on the bookmarks. The only advice given sort, are recirculation references to add new bookmarks to the Unsorted Bookmarks folder and renaming, neither of which I have a problem with for the moment.

  "If you use the default theme there are two arrows next to the folder: name in the dialog Page Bookmarked." The arrow to the right opens a larger window (the same as when you select Choose) where you can select any folder in the folder Menu bookmarks by opening this folder (where all bookmark folders residing of your creation, outside the Bookmarks Toolbar folder). Simply select the folder you want to in this larger window. »

  I noticed that both of these arrows; If I select the larger of the two I just get a drop-down menu that lists the Bookmarks Toolbar, bookmarks Menu, unsorted bookmarkswith the new folderoption. If I then select new folder, then only I am presented with my existing bookmarks menu. From here I can then select a directory, but the new bookmark is placed inside the list in the folder/sub folder.

  If I choose the smaller arrow, I get Bookmarks Toolbar, bookmarks Menu, bookmarks not sorted, to Choose. Now if I select Choose, then I get a drop-down menu of bookmarks, Bookmarks Menu, Unsorted Bookmarks toolbar, with the new folderoption. And the above applies with respect to sorting.

  "Personally in profile with my largest set of bookmarks (have 3 different sets of bookmarks in separate profiles), I opened the sidebar using {Ctrl + B} with my left hand (small and indexes), drag the icon of the Web site with the mouse in my right hand, and then close the sidebar with another use {Ctrl + B}."

  You use the Ctrl + B to open or close, is by far the simplest method and I will use it in the future. And by dragging the icon of the Web site in the manner described above seems a valid method to add a new bookmark. However, there is no way to change the new name of the bookmark before being placed in the folder. But at least with this method, you can choose the exact position in the file/folder.

  "In addition, sometimes in another profile I drag site for the Bookmarks button icon in the Navigation bar, which opens the drop-down list of bookmarks and also the folder I want to place the new bookmark and save a new bookmark in this .manner....

  By dragging the icon of the site Web in the manner described above is also a valid method to add a new bookmark. However, there is no way to change the new name of the bookmark before being placed in the folder. But at least with this method, you can choose the exact position in the file/folder.

  "... "I do not use the bookmarks toolbar in any profile, I reduced the upper toolbar area down to only one or two toolbars to save space for the content of the page."

  Me too.

  As you say, it's not perfect, but there are ways to sort the entries. However if you want short and precise names for bookmarks, (and not the complete Web site address and or the list of what is at that site) then a certain amount of editing and or random play will take place at a later date. I'll look around for a Add-on to help me and thank you for your knowledge and help in this quest. I think for now at least, I will have to mix & match different ways to add new bookmarks and continue editing bookmarks newly added at the end of each session.

  Novel I just fell on the info that FF is a 32-bit application. Now I use it on a 64-bit PC. I checked beforehand to make sure that I got the correct version. But the newly acquired information indicates that the 64-bit versions of FF may be unstable. Maybe that's why I don't get the same range of menus as suggested.

• Query took too much time when adding new column to the table and the index set on this

  I added a new column to the table that contains thousands of records. and created the composite index with three columns (those newly added + two existing column)

  for the specifics. TBL table there are two columns col1, col2

  I added the new column col3 to TBL and created composit index (col1, col2, col3).

  Now for all the records in col3 is NULL. When I choose on this table, it takes too long...

  Any idea what my I do bad., I have check the query plan, it is using the index

  It is solved using collection of statistics using the

  DBMS_STATS. GATHER_TABLE_STATS

  @Top.Gun thanks for your review...

• When adding new record create id data and the static information

  Hi, I have a tabe datbase like this:

  CREATE TABLE 'paper')
  'id_paper' INTEGER (11) NOT NULL AUTO_INCREMENT,
  'sample_url' varchar (50) COLLATE utf8_general_ci NOT NULL DEFAULT ",
  PRIMARY KEY ('id_paper')

  
  When I add the new record, I need the "sample_url" field to automatically add this information:

  images/15_sample.jpg.

  images - is subfolder where my pictures are stored
  15. is id_paper (primary news NuméroAuto ID)
  _sample.jpg - static and must be added.

  I use adobedeveloper Toolbox to generate code with minor changes, I'm no guru php either.

  I retrieve my data like this:

  SELECT
  Paper.ID_PAPER,
  Paper.sample_url,
  Concat ("< img src = images /', sample_url, ' ' ' width ="66"height ="174"/ >") AS sample
  Of
  paper

  I use this code to add fields:

  Add columns
  $ins_paper-> setTable ("paper");
  $ins_paper-> addColumn ("sample_url", "STRING_TYPE", "POST", "sample_url");
  $ins_paper-> setPrimaryKey ("id_paper", "NUMERIC_TYPE");

  It's php for the text box:

  < b >
  < class td = "KT_th" > < label for = "sample_url" > sample_url: < / label > < table >
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  <? PHP echo $tNGs-> displayFieldHint ("sample_url");? > <? PHP echo $tNGs-> displayFieldError ("paper", "sample_url");? > < table >
  < /tr >

  
  What should I change?

  I think in this line here:
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  I need to add php code to get the primary key ID and my static text too, but how?

  Hello

  Well the modified code is irrelevent at this stage. The custom trigger should do the trick. Test on my test server here it worked fine. So, something is missing. I was even going to the point of adding nothing to the sample_url field and he was always fill the db.

  It's my registerTriggers

  $ins_paper-> registerTrigger ('STARTER', "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
  $ins_paper-> registerTrigger ("FRONT", "Trigger_Default_FormValidation", 10, $masterValidation);
  $ins_paper-> registerTrigger ("END", "Trigger_Default_Redirect", 99, "paper.php? done");
  $ins_paper-> registerTrigger ("AFTER", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("ERROR", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("AFTER", "Trigger_Custom", 50);

  Maybe you can post a txt file with the uninstall code?

  I really think at this point it's something small.

• Problem when adding new column on table with report form

  Hello
  
  I have a form on table (either emp) with report(select_empno,ename,job_from_emp).i have insert, update, delete operations on the table.
  
  Now I added a new column DOB for alteration report emp.i sql query to show the new column altered report.i insert process (Block anonymous plsql) to insert this column too all by creating a new row.but the problem is with update.i am not able to find how to upgrade this new column while doing the update to line level.
  
  pls let me know if you can give some ideas on this.
  
  
  Kind regards
  CK

  Well, sorry for sounding terse.

  I have a few questions.

  Have you added the item to the form page and associated with the database column?
  You use your own PL/SQL page process to update or do you use the 'row emp process' process produced auto?
  If it's your own please send the code with the word {noformat}

  {noformat} (with the curly brackets and in lower case) above and below it. Your code should be formatted like this once you've hit post message:
  

  BEGIN

  NULL;

  END;

  Cheers
  
  Ben                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                    
  

• OfficeJet Pro 6830: Change HP ePrint address when adding new printer

  I recently bought a new printer to replace the one I had.  I chose a custom for ePrint with the old printer e-mail address.  I removed the old printer to my devices, but when I try to update the email ePrint for the new printer, it is said that the enamel is already used.  I want really to use the simpler email ePrint, I chose, rather than an HP gave me.  Is it possible to do this?  Thank you!

  Hello

  I'm afraid there is no way to use the previous e-mail address.

  An any used ePrint address no solitaire is usable for any device remove or even for the specific device (for example after a reset of the product) for reasons of security.

  You must choose a new address custom ePrint, the past can no longer be used.

  Kind regards

  Shlomi

• Error when adding new subnet for CSM group

  Hello

  I'm trying to add a new subnet to an existing group in the CSM v4.0.1 b7823 company.  When you add a new subnet to the Group (the other elements of the group is a different subnet), CSM emits several errors for each SAA touched:

  Description:

  BB (GROUPNAME), referenced by the 'Http network' on maps (DEVICENAME) device to multiple network IP addresses!

  Cause:

  Made http refers to a network object that corresponds to more than one IP address on the device

  Action:

  Please config the policy with the network object that resolves to a single IP address.

  There is an error for ICMP as well.  The group is already a /24subnet content, I don't think it's a clear mistake.  Has anyone encounter this?

  Thank you very much.

  Justin

  Hi Justin,

  what you observe is normal given the way in which we have set up the remote access policy. As you probably know, in cli, you can specify only one rule of access by line for ssh, http, telnet etc...

  For example, if you want to allow ssh access to ASA lines host 1.1.1.1 and 2.2.2.2 you put two

  SSH 2.2.2.2 255.255.255.255 outside

  SSH 1.1.1.1 255.255.255.255 outside

  The CSM, we model this two lines as two different object, so the building of network type block object that refers to the object of type ssh access can have only one entry. This behavior is the same for ICMP as well.

  Access list is different because we model to the CSM in a different way, plus you can use the object-group put on different networks. It is not possible to access to the device.

  I hope that gave you an overview a little more on the reason

  Also it would be nice to score this answer if this is the case

  Stefano

• Jar of i/o Error when adding new class

  I have a huge problem. I get the following error of Cap trying to fill:

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  After adding a class to the project. I delete the class, and everything works well again. It does not matter what class I add or where - it seems that there is a size limit or number of classes?

  I am not able to finish my project because I can not add new classes...

  solved by moving

  C:\Program Files\Java\jdk1.6.0_21\bin\jar.exe to C:\Program Files\Java\jre6\bin\jar.exe

• How to change a field that is the "Standard report column" when adding new line

  Hello

  With apex 5.0 and database 12 c, I have created the query as follows:

  
  

  APEX_ITEM. HIDDEN (2, TRANS_M_CODE).

  APEX_ITEM. HIDDEN (3, TRANS_D_CODE).

  APEX_ITEM. HIDDEN (4, TRANS_TYPE).

  APEX_ITEM. HIDDEN (5, CO_CODE).

  APEX_ITEM. HIDDEN (16, DR_LOCAL).

  APEX_ITEM. HIDDEN (17, CR_LOCAL).

  APEX_ITEM. POPUP_FROM_LOV (6, ACC_CODE, 'GL_ACCOUNT') ACC_CODE,

  
  

  This field is a Standard report column, when there are data without problems, but when you add news is disabled showing null.

  
  

  
  

  Any Suggestions please
  

  use the query

  Select

  "ROWID",.

  apex_item. Hidden(1,empno) | EmpNo as empno,

  ENAME ename,

  "JOB."

  "BISHOP."

  "HIREDATE",.

  "SAL."

  "COMM"

  "DEPTNO".

  of ' #OWNER # '. " EMP.

  Empno as hidden item and ename like textbox to display as a tabular presentation

  apex_item. Hidden concat with hidden empno point for your use

• How to keep the chart with different colors when adding new data

  Hi, please help me.

  I want to compare my first plot the data (trace of legend) with my following data in the graph of the plot. my program didn't work it just add new field data and color for the next data has not changed.

  What's a matter of signal conditioning? Please, click on Options, and to request the removal of moderator for the jury of LabVIEW.

• When adding new events to the calendar for Thunderbird lighting plugin, the application refreshes and removes recently added events.

  I have three calendars ICS (network) in lightning. All have offline support checked in the settings.
  Yesterday I opened TB and lightning to find all events that I had entered disappeared (there for a split second then it regenerated).

  My Calendars online are in the electronics/Pim 'Horde' mail system provided by my Web host.

  I tried several tests and disabled the Auto-Refresh feature (a solution proposed by another article), however the entries created in lightning disappear spontaneously. However, these events that I create in the online version of the calendar persist. So it would seem that they never actually get downloaded (synchronized) in the online master calendar.

  I use ICS as the online master calendar access method.

  Any help solving this would be appreciated, otherwise I'll have to remove the light and find a replacement.

  Concerning

  Adam

  ICS is a file format and are not really suitable for a network schedule. Apple cannot do anything more than read only works on their Ical calendars and for reading writing recommend CalDav. Horde maybe has a similar problem.

  Their web site, I noticed that they support CalDav. This is a calendar designed from scratch like this network protocol.

  This seems to be instructions on how to locate the URL caldav in the Horde, but knowing nothing about the product I don't really know. http://wiki.Horde.org/CalDAV

• Break AP - SSO when adding new license?

  According to Cisco guide: click ON ME

  It must break the AP in order to add the license on elementary WLC. Is this good?
  All entries? I find it weird because we need to break to add license

  I guess if it is then it is not possible to add the license if they are pair? Is that right as well?

  Add additional licenses for the primary Wireless LAN Controller (WLC) of High Availability (HA) and to avoid any conflict that may arise in the network, you must break the HA pair.

• Data Center / Intellegent scheduling / planning company tide Software / Configuration settings when adding new hardware

  Tidal.V621.Suggested.Configuration.Settings.For_.clientmgr.props_. Master.props_.and_.TES - 6xxx.dsp_.jpg

  

  My environment is running v6.2.1.415 tide in Windows.

  Recently, I was able to receive more processors to the computer (and memory) for both servers - the Client Manager and tide Master.

  My environment was not in fact considered environment tide (due to the size of the database), "medium" because of the number of jobs on a daily basis and/or users running clients.

  Looking at the Performance Tuning Guide 6.2.1, she suggests to place some more recent values in three files:

  --

  [1] Master.Props,.

  [2] Clientmgr.props and

  [3]-6.0.0.0.dsp

  --

  But the most funny about this, is that the file-file 6.0.0.0.dsp does not exist.

  Someone at - he had this situation before? How do solve you? (Don't you worry about this?)

  In addition, is the only way the changes - is to turn off the two services, make the changes, and then turn on services?

  Or can I make configuration changes, and then stop and start the two services (master and client Manager)?

  Thanks in advance-

  Hi Dave,.

  The performance guide uses an arbitrary name for the dsp - Data Source Provider / plugin CM. This file is located in your Customer Manager-config-*.dsp

  Backup of all your accessories and all the PSD files. It is best to stop the Client Manager, and master, make configuration changes, then launch Master, then the Client Manager. Online changes don't usually end up too well.

  Kind regards

  The Derrick

• BlackBerry Smartphones eliminating action of auto-sync when adding new entry in the calendar on my BB Curve 8330

  Hello world

  I use my Yahoo email address as my main profile to my calendar (CICAL) and messaging (CMIME) as my default Services.  I do a daily sync with my Outlook 2003 calendar, contacts, notes, etc., via the USB port but I will not sync my BB calendar with my Yahoo calendar (I don't even use Yahoo calendar besides).  Whenever I have to edit a record on my BB calendar I see arrows at the top right flashes.  I guess that means that my curve trying to synchronize changes made to another application, may Yahoo calendar.  How can I disable this feature?  I want to reduce the most possible the wireless transmission of my BB and I think that it is a useless activity since I am not wireless sync my calendar for something else.

  Thank you.

  It has nothing to do with the fact that your yahoo email is configured on your BB, although its default configuration BOF calendar. It will not sync wireless with yahoo. It is not possible unless you have yahoo GO application, which I did not even think synchronizes with your BB calendar, just gives you direct access to your yahoo calendar.

  My BB has always arrows, rarely is it not... it does not mean that final data... for data control... checking doesn't use your data, not only the sending and receiving

• Animated images in place when loading new QML file

  I noticed that when I insert new QML files, the images Animate into place.

  For example, if the screen contains an image at the position X, Y, and width W and height H, then the image becomes visible at the point of coordinates 0,0-0 width and height 0 and anime then in place by flying over to the X, Y coordinates and more in addition to being finally width W and height H.

  If I then click on the 'Back' button and enter this QML screen a second time, it does not animate.

  This implicit animation is intended?  While the implicit animations are pretty amazing and a great tool to have, it seems intuitive to the use of screens animations implicit when they are first loaded. It creates a rather unpleasant company and Visual distraction when loading screen.

  I thought that I could disable it by adding the following to the ImageView controls:

                  attachedObjects: [
                      ImplicitAnimationController {
                          enabled: false
                      }
                  ]
  

  ... but they are always animate.

  Thank you

  Daniel

  Did you notice the sample code above?  (yes)

  This seems to be fixed with the latest SDK.