Annex MSP import in Instantis

Similar Questions

• Using Primavera P6 project

  We want to serve you Primavera P6 project to enter dates of start/end of project Instantis phases in order to plan the resources via Instantis. What is the best way to do it? We thought the export of P6 in the MSP, then in Instantis? Best practices for a use like this case?

  Yes, here are the steps to make this work

  1. 1. print a copy of your Active calendar / roadmap for reference
  2. 2. in EnterpriseTrack, create a new project and include the team you want to use
  3. 3 export your schedule/roadmap for MSP
  4. 4. insert or remove columns from the MSP on the asset/roadmap calendar to match the format of the schedule/roadmap that you exported from the EnterpriseTrack.  You can do the same for the actual and planned Effort.
  5. 5. in your schedule/roadmap active, add a text column and copy the resource assignments in the text column (add the same column of text to your schedule/roadmap exported EnterpriseTrack)
  6. 6 remove all resources in your Active calendar / road map by going to the table of resources and removing resources
  7. 7. highlight the lines of Active schedule / roadmap and copy them into the schedule/roadmap from the second line (this will keep the beginning of the project at the same time)
  8. 8. change the two line so it has the same start date as the start date of the project and make sure that it is at the same level as line 1.
  9. 9. Remove line 1
  10. 10. your resource assignments. (Refer to the printing or the text column)
  11. 11. Save and import the project schedule/roadmap to EnterpriseTrack

• Sony camcorder initially recognized in the new Firewire on HP Pavilion 500 - 267C Desktop, then fails.

  Hello, I have Windows 7 on my HP Pavilion 500-267C.

  I bought a Firewire card (http://www.amazon.com/JacobsParts-Express-Firewire-Profile-Controller/dp/B007WTV092/ref=sr_1_5?ie=UT...) to install it firmly into the short slot and the computer restarted, he acknowledged, driver installed. I checked Device Manager and says "OHCI Compliant IEEE 1394 host controller, under IEEE 1394 Bus Host Controllers" when I play my clogged (wall and CPU) mini camcorder - DV Sony DCR - HC 85 NTSC, video import window instantly appears (from the photo gallery), I choose "Import video parts" or also "full band", the band rewind then I always get this message no matter what :

  "The digital video device that is used for importing video has been disconnected from your computer. Importing video will be closed.  Check that the digital video device is properly connected and turned on, and then try again. »

  I didn't hit what whatsoever. This also happens when I use Windows Live Movie Maker and free software that I downloaded to capture AVI. This problem is never happened on my Windows Vista HP Pavilion 2009 a6750t (it came with firewire) and with the same Camcorder - software started instantly, any specifications of my time, no worries, 5 weeks ago.

  On the new computer, I rebooted several times, also in a position to firewire cables (used one supplied with the card and mine), had the band in 'Play' or 'Stop', changed ports, nothing helps.

  Movie Maker initially rewind the tape however, but above message always appears, and the program closes automatically.

  What can we do?

  Success took place! I bought Texas Instruments FireWire card here http://www.amazon.com/gp/product/B002S53IG8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and the driver is automatically installed on my computer and photo gallery and Movie Maker recognized and allow me to import portions of the band successfully on my hard drive where I can edit the video. I tested and retested without any problem. I'm came across this site http://kc.flex-radio.com/KnowledgebaseArticle50179.aspx which had recommendations, including the Syba I bought (check 1/3 down), as well as an another chipset Texas Instruments also available on Amazon, http://www.amazon.com/SIIG-FireWire-2-Port-PCIe-NN-E20012-S2/dp/B000G6U8VY/ref=sr_1_1?s=pc&ie=UTF8&qid=1406680989&sr=1-1&keywords=firewire+texas+instruments. I thank very you much referring to the Texas Instruments chipset firewire cards. I didn't realize that they would work so well. I am very happy.

• WVC54GCA two cameras record

  I installed 2 cameras. The two picked up and seen on screen. I tried instant registration. Record show both. However when I try to play, it shows two MyCameras on the drop down menu even if I named cameras like 'Before' and 'Back '. I can read it again since the 1st MyCamera and when I try the 2nd MyCamera it says there is no file to play! Sometimes, when I select the 2nd MyCamera it says "Reading S has encountered a problem and needs to close" when I checked the hard drive I see .sef files under the TWO cameras under data. I think that the problem can be solved if the drop-down list displays the names I gave for the cameras and not two MyCamera.

  Any help/suggestions appreciated.

  I solved the problem.

  First of all that I restored to factory default. Advanced Configuration/Administration.
  So to be doubly sure reset the cameras with the reset button on the camera.
  Installed the first camera and gave a name.

  (During the 1st attempt, I installed two devices one after the other and later changed the names.) I don't know if this is important)

  Instant recording was done, BUT in reading, it was just a single camera called MyCamera!
  Has been able to reproduce the recording.

  Installed the 2nd camera as above and makes an instant recording.
  This time, the drop box showed two cameras. MyCamera AND the name of the 2nd camera!
  The camera clicked and I could play the two records!

  Thank you everyone for your suggestions.

• Instantis 9.0 - custom fields can be updated when importing

  Sure that the answer is no, but thought I would check to make sure.

  The custom field to project are available on the tab Instantis_Financial_Parameters in the export of the financial model for a project. It's a one-way simple push, right?  Impossible to update the Instantis infield by changing it on the spreadsheet and import, correct?

  You import the area directors or of export/import in the field of project finance.  You must enable the possibility to import and export in the project.  If you do, you cannot update manually or have a calculated field.  You are locked.

  An import from spreadsheet (saved in a zip file), should be updated all custom fields.

• AE crashes instantly when importing PSD as a model.

  I tried EVERYTHING (the layer styles rasterize and fonts, keep the size of the layer or not)

  nothing works

  don't know if it works for everyone, but remove autodesk link compositor plug fixed it for me.  If anything, copy all your third-party plugins, to a new folder that is remove and see if that solves it.  If so, add them in one at a time to see which plugin is it.

• After you import the demo for intantis 9.0 activity type is no error.

  I installed Instantis company track 9.0 and sitewanddemo.zipe imported for her. "After import, when I validate ' Configuration ', I get the following errors:

  Static data

  1	Error 55102: A type of activity with identifier containing 'question' does not exist for the Initiative of skeleton.
  2	Error 55104: A type of activity with ID containing 'at risk' does not exist for the Initiative of skeleton.

  How can I fix these errors.

  Thank you

  Go back to mode reconfigures, click on the Deployment Options tab, and make sure you have these types of activities defined as activities Non - WBS.  If they are, make sure that they are defined as Non - WBS annexes the area set schedules.  If you need more detailed support, you can get ahold of me at [email protected] or 206-396-5588.

• Is it possible to play different sounds for the emails and instant messages?

  Hello

  I was wondering if it was possible to play different sounds for the emails and instant messages. I use Thunderbird quite often with emails and instant messages imported from Gtalk.

  I think it would be very convenient to be able to distinguish the two sounds, because they do not involve the same things.

  Thank you very much.

  Olivier Hubert.

  There are only six modules of cat, three of them are on notifications. Choose the one you think will do the job for you. https://addons.Mozilla.org/en-us/Thunderbird/Extensions/chat/?sort=popular

• Send instant messages via email from yahoo with the new version of firefox

  I can't send instant messages via email yahoo in the new version of firefox, how do I fix this problem

  Hi hwkangel,

  It looks like a known issue reported here:

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=713014

  There was a workaround solution posted, but I have not tested it myself. Here are the steps.

  1. Go to the Yahoo Messenger Options - change the window in the tab menu and press OK.
  2. Then go back and switch to the small window and press OK.

  The bug has already been fixed. So, you can download the beta version of FF 10 If this is a really important feature for you.

  Hope this helps!

• not all the imported photos appear in moments without leaving the app

  Hello.

  I use a photo stream having the photos to import into my Mac (which has iCloud library enabled) from my iPhone (which has no active ICPL).

  About half of the time on my mac Photos will miss a photo or two times. You can see in the "pictures" section, but it will not appear in the 'Moments '.

  Leave the Photos App and relaunch it solves it.

  Anyone else running into this on a regular basis?

  Curious. And please in advance.

  Holly

  For devices using iCloud Photo library My Photo Stream is not active - the photos are synchronized using ICPL not MyPhotoStream

  When you have pictures in all the Photos that you don't see in Moments right click in all the pictures and show instant - made pictures then show in a moment?

  If it does not back up your library of Photos and then press the command and option keys during the launch of Photos and the repair of the database

  LN

• Mail crashes when importing MBOX files

  Mail crashes instantly when I select a MBOX file to be imported. In the brief moment before crashing it creates a folder to import and an MBOX, but the MBOX is empty.

  


  A few days ago I had a MBOX to import. It appears in the Library/Mail/V3/boxes to the letters/folder, then the MBOX container keeps messages from work. However, this MBOX does not appear in the sidebar.

  I went to a backup clone made shortly after the installation of El Capitan. I have replaced Mail and every file relating to mail that was in my user library. This leads to crashes instantly every time instead of intermittent partially blocks by an import.

  I made a secure boot boot. The problem remains.

  Reason 49 on why it is wrong to let the snow leopard. I wouldn't have moved to the Mail except that Outlook 2011 cannot search for emails or run unread simple as filters. (Recommendation from Microsoft is to buy Office 2016).

  Any ideas on how to fix the post other than to reinstall El Capitan?

  I have more information. I started in Snow Leopard and opened Mail 4.6. He had no problem importing the files MBOX to Outlook emails and attachments. I started to El Capitan. I deleted the folder/Library/Mail. I launched Mail 9.2. He created a new folder/Library/Mail that had obviously, no emails. I imported into the Mail 4.6 Mail folder. Everything imported perfectly. Yay! I then tested the capacity of 9.2 mail to import a MBOX to Outlook-created file small. Immediate crash.

  I hope that the problem was that Outlook 2011 on El Capitan generates corrupt MBOX files, but appears not to be the case. They looked good in BBEdit. Outlook had no difficulty to import.

• I can't install Windows Update and instant messaging

  I am currently using Windows Vista on the desktop, I tried to update the Windows Update for a few months now. Windows Update checks the updates and State it is 36 important updates.
  But when I try to download the updates, a few error codes are displayed. The error codes are A 80071, 30 and 643.

  I tried to access Windows Defender and he spent 2 hours after scanning my computer, he is unable to check for definition updates (error code is 0 x 80244015.

  Recently, I also tried to access instant messaging Windows, but it prompted me to update to the last Messenger until I can use it. Windows Live install managed to run, but then the download will fail again.  I think it's also because of the inability to access Windows Update?

  Help, please! I'm trying to find the problem.

  Thank you very much!

  We use Trend Micro Internet Security Pro (installed since 03/20/2009) as our main Anti Virus app for less than a year and the subscription is still valid...

  Other security applications are Registry Repair Pro (the free version, install Date: 28/02/2008)...

  Yes, Norton has been previously installed on the machine when we bought it first. However, it has since been removed from the beginning using Trend Micro.

  Uninstall Registry Repair Pro & reboot. If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  Norton applications are notorious for not properly uninstall.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  Test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Important NOTE about passwords in bios bug!

  Hey everybody,

  IM the proud owner of the laptop Lenovo SL - 500 series. I never had any problems until today:

  I decided to add a supervisor and Boot password in bios to better secure my files, I found a huge problem here and I found the solution that perhaps others would like to know too:

  Example:

  Ive like password "abc123 #1" in the bios, he asked me to confim this password and I did it. All is well until now.

  I restart my laptop and he invites me to type my password to start:

  Password: "abc123 #1.

  Jim

  Hey now, that's strange, the password that I just put refused. (Stress level was up to 90% instantly, cause as you may know Lenovo data security is so good that you would need a new motherboard if you can't get the password!)

  I have tried tons of passwords but he refuses the password. Until I found the problem and the solution of a lot of luck!

  the symbol # is NOT handled correctly in the bios. If you set the password, it allows. If you try to change it and retype the password it allows. But when you're out of the bios and the password prompt is displayed. It wil not understand the special symbol.

  What causes your password not valid cause is not the 'same' password.

  Solution:

  I replaced the # with the TAB key on my keyboard

  So instead of typing the # I knocked my TAB key once (Yes it magicly is considered as a symbol).

  So that was my password 'abc123' TAB '1 '. Instantly my laptop boot and I was able to access the bios again and remove my password set using the TAB key instead of the special symbol # in my password.

  So for future reference: do not set a special symbol like password in your bios. Even if she acts as if it was OK. It will be brick your laptop and it will cost you a new motherboard if you find out what the symbol is replaced by.

  In my case No. == TAB, I don't know what it is for other special symbols and im going to try it!

  I hope that people will appreciate this information and this will help other people who accidentally brick it portable by applying a special symbol in the password here!

  Other users of Lenovo good luck!

  Séverine,

  Thanks to consolidate related topics. Based on these discussions, their solution was to omit the special character when access to the bios, but this current thread's advise to use a different key replaces a special character. However, it doesn't matter as the most important thing is to ban the use of special characters in the first place. Don't you think?

  Technokiddy,

  I reported this problem and advised him to consult the version 1.28--> update BIOS (Bootable CD) - ThinkPad SL300, SL400, SL400c, SL500, SL500c

  Before you can update this new bios, make sure to disable the BIOS password avoid any unexpected errors.

  Problem fixes:
  -Improved password security.
  -Fixed an issue where the LCD brightness setting could not wo

  However, I do not know if the use of special characters are not allowed or not in an attempt to put in place a new password.

  There are a few questions that I need to confirm double with you also.

  1. Could you tell me how you insert the special character ' # ' for supervisor password?  The English keyboard layout and Netherlands's character "#" is given by shift + 3
  2. Are you sure you selected character ' # '?
  3. Go to the windows Notepad and press the same button that you press is the BIOS password settings. What character do you see?

  -Cleo

• VM Exchange or SQL with instant HIT Kit and VSM

  Hello

  I wonder if someone could explain a bit more on integration of VSM and HIT kit without scenario ISCSI based comments like below...

  Exchange and SQL servers are run under vm on Vcenter/Vsphere 5.5 environment, and there is no comments ISCSI connection which means that all disks are vmdk.

  So, based on this scenario, is it possible to use the HIT kit to restore data (granular level) even if the snapshot has been taken by VSM data store option?

  Thanks in advance...

  Hello

  No, you cannot use HIT / ME in this case.   The HIT kit requires the MS ISCSI initiator to work properly. For creation and restoration of snapshots.

  VSM is against the whole VMFS data store.  First VCS invites you to create snapshots, the VMware VMDK VSM will require instant volume EQL.

  VSM don't offer currently not at the file level restore.  However, you can do it manually.

  Bring the EQL data store snapshot online.

  Connect to a node ESXi and add this snapshot of the data store to that node.

  (With storage add, after a new analysis of the ESXi iSCSI initiator)

  It renames the snapshot of the data store for: "snapshot - XXXXXX -

  You can do a few things here.  Copy the original entire virtual disk of the snapshot to the data store. Or more generally to add the file VMDK from the snapshot on another virtual computer as another drive.

  When you start the virtual computer, it will appear as a new drive letter.  Then, you can copy individual files of this copy.

  An important thing to note.  When you use a snapshot, you will use instant reserve.  So make sure if you attach not already 100% instant reserve that increase you it as much as possible.  If you consume the reserve of the snapshot, you work with is removed.  According to which EQL FW version, you can borrow from the free space.  This is especially true if you replace a VMDK set.   That will use up to the reserve very quickly...

  When you are finished with the EQL snapshot, make sure first that no VMs still use it.  Then put the instant EQL offline in EQL GUI.  And then do a rescan the iSCSI initiator in ESXi GUI.  This will cleanly remove the volume from the node ESXi.  Otherwise, he might try constantly to reconnect to the EQL snapshot, generating errors repeated in the EQL GUI and alerts if you have set up.

  Kind regards

• Instant ink HP program

  I just received an email offering me replacements of ink automatic as required by my printer at $2.99 / mth - plan of 50 pages: $4.99 / mth - plan of 100 pages: $9.99 / month - plan of 300 pages.

  When I tried to pick this up, I like it is available in UK and USA - so why do we have sent emails in Australia?

  I just tried to buy a black ink and tri-cartouche high yield and will cost me $72,63 minimum, which is a very important difference.

  Come on HP - you plugged into the sending of these emails.  Now you must stand by your mistake.

  Hello Laura,

  I apologize for any confusion about the email. There was an error on the part of HP where wrong sending emails. Emails were sent to customers who have an account connected HP based in the United States, but he did not remove the printers that are located outside the United States. And unfortunately, at this moment, the moment HP ink will not work with printers in Australia. HP is looking to expand the instant ink to other countries, and we will check back with you as soon as it is available in Australia.

  Sincerely,

  KAB_11