Annotate a graph

Similar Questions

• Name on the track of graph

  Hello

  Is there anyway that I can control the names on a graph plotted in the graph XY?

  My goal is to have a name that follows the chart according to which graphic I choose

  Etc when I choose Chart 1, a name appears point plotted on the graph, the same thing when I choose graphic 2 but a different name associated with this chart

  Not know Annatations but I can programingly control this?

  Using the List of the Annotation property. Look at the example called programmatically annotate a graph to get some ideas.

• graph track color

  Hi all

  is it possible to have multiple colors in a single parcel?

  Here is a summary of what I'm trying to do:

  a graph is continually running with the value '0'. When the pulse is given, the value "1" appears on the chart (just a value when the stimulus is given) and "'-1 when it receives the response." Sometimes, the user gives answer when no pulse is given. that would be an invalid response.

  so if the response is valid that I want to show '-1' as if it's a no answer valid I want to show '-1' in red and green. "

  I enclose the photo of the chart.

  How can I achieve that?

  Thank you

  Ritesh

  MikeS81 wrote:

  Hi Ritesh,

  a unique waveform can have only one color. Maybe you can use annotations. See the example "programmatically annotate a Graph.vi ' for more information.

  Mike

  Fix!

  We must therefore use using a second plot to highlight parts of the plot tht are out of spec.

  I've used two methods

  1)

  Second plot to use which has "naN" values for all points that lie in the spec and the actual values outside the norm ' NaN' points are drawn not so the second plot will paint only when the values are out. ' "." Optionally set the collor 'fill' of the second plot to "zero" and you will get under this bad resposnses blobs.

  2)

  More work but what CC has suggested in this thread where it uses "NaN" thing on the first parcel so cut the normal plot while the value is out of specification.

  Have fun!

  Ben

• How to annotate the diagram?

  I need to annotate the following table with the values in the column of the brand.  I would like to a symbol appear for each date in this column.  The values in the column of the brand are calculated simply by subtracting a constant from a date in the Date column.

  

  Here's what it looks like if I try to include the column of the brand:

  

  Any ideas how to make this work?

  HI ' space,.

  The chart you are using is a graph of the category. Cards draw one or more sets of values in a list of categories.

  Your chart uses data listed in column A of the table (column heading) as labels for categories, spaced along the x-axis of the chart.

  The values in column B (not a column header) are plotted against the y-axis.

  When you add a second set of values to the table (in column (C), and then include this series in the chart, this series is added to the graph and the scale of the axis is automatically adjusted to account for these values (more on that below).

  You will notice that the four values in this column are placed on the card directly above the values in the same row in column B. Each value in the same row is attached to the same category, and each category in the list in column A is assigned to a post also spaced on the x (x-axis).

  Given that the values in column C are derived by "subtracting some constant of a date in the Date column' these values are also dates. If you want to note these dates on the x axis, the x axis should be a value axis, rather than a category axis.

  Digit has two types of graphics plot values against values - the scatterplot and the bubble chart. The appropriate choice for this task is the dispersion diagram.

  Category graphics take the line header and the column header labels.

  Values for scatter graphs cannot be placed in the column header or header lines. So the first place, needing a change is the Table.

  Click on any cell in column B (Delta) and press option + left arrow to insert a new column (non-en-tete) to the left of column B. Label the Date column and copy the dates in column A in this new column B. Note that these must be Date values and actual time, which can be formatted to display as those of the current column.

  Columns B and C now contains the first set of pairs x - y for the new diagram. Column D (Mark) will contain the values of x for the second series. Add a new column (E) to the right of column D to hold the values of y associated with brand x values in column D. These values will determine to what extent above the x axis each mark will appear. With the current range of value y (43-104), you can consider placing these brands with a value of 38 next to each date in the column of the brand.

  The result would be similar to this:

  

  Kind regards

  Barry

• draw the line in graph (picture) xy

  Hi all

  I place an image in xy graph that I allow to annotate some of the indicators.

  After I put the flag in a place in xy graph (picture) I want to draw lines between indicators.

  can someone help me with this? I'm using LABVIEW 8.2.1

  Sorry for my English.

  Take a look at my example of the past.

  Here; rapid s and diry draft amendment to your VI, see if it works for you. (the lines are drawn between annotations when you press OK).

• About Grapher

  Hi, I tried to graph of the entire greater function Grapher. However, I discovered that I can't put 'int' as a valid command.

  

  Here is the image that shows what it looks like on calculator TI-84.

  

  So, I was wondering if there is another symbol that can replace "int" to Grapher?

  Enjoy it!

  Use Floor. In other cases, click Help, and then view the built-in definitions.

  (144660)

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Of a complete log of Information can I find myself with several graphs of selected information

  I received a great response here before, here's something that I'm not sure is possible... but maybe you know.

  Current version of numbers (3.6.1)

  So, I create a log of the different courses.  Here is a simplified version of what I do:

  

  The idea is so that I will have separate sheets for each of the classes, where I will have the analysis of numbers.  For example:

  

  What I would like to have on this page is a graph being each class, day by day, showing the presence so that I can follow increases or decreases trends, from the newspaper on the first sheet.

  I thought I'd try to find a way to have a referenced version (Alias) of the main newspaper on this sheet, which I can then do a filter before you apply a graphic, or perhaps a function which will only list info in a new table which matches certain information (such as the title of "Workshop").

  I can be looking for a function that does not exist, but if there is anywhere I could get a clear answer on this subject, I figure that it would be here.  Thanks for any advice you can give.

  Kevin Cunningham wrote:

  I can be looking for a function that does not exist, but if there is anywhere I could get a clear answer about it,

  Numbers (and other spreadsheets) are good to extract summaries of data and plot summary.  Here's a way, using SUMIFS.

  

  The formula in B2, filled to the bottom of the column:

  = SUMIFS(log::E,log::$B,$a2,log::$C,$A$1)

  The formula in C2, filled to the bottom of the column:

  = IFERROR (SUMIFS(log::F,log::$B,$a2,log::$C,$A$1) "/ B2," "")

  The SIERREUR function tells number of leave the empty cell if there is an error because attendance is 0.

  The graph is 2D 2 axes in the case where you want to do something similar.

  Once you have the summary table and table of work, then you can 'clone' them by copy - paste other sheets and put another name of the workshop in cell A1.

  SG

• Point of intersection between the line interpolated in Grapher

  How to find the point of intersection between interpolated lines using points offered as input to a file in grapher comps?

  What version of Mac OS X?

• Using annotate preview - delete + insert?

  Hello

  I just started to use the feature to annotate previews for annotate PDFs on a MacBook Pro, after you use the GoodReader app on an iPad.

  In GR, there is a way to expunge erroneous text and insert the correct text in a single action that perfectly binds the struck-out text.

  by example, if the text read "mAcbook", you could use GR to delete the word and leave a note to insert "MacBook", in a single action.

  Is there a way to do this in the preview? I found the action for strike through text, but not a way to "strike-out-and-insert-correct-version-in-same-place".

  Thank you very much in advance for anyone to help. I use a MacBook Pro running Yosemite 10.10.5

  What you can do is in the menu Tools-annotate.

  As far as I know, there are no simultaneous action you describe for Goodreader.

• First HP: Lack of Sections of first graph with steep slopes on HP

  I saw somewhere an old post on the Internet where a user was having difficulty to see the graph of y = x ^ 4 (x-2)(x-6) using a "Decimal point" display window and the "Evolutionary" method in the application of the function. The chart has not demonstrated the branch of the chart with the x origin of (6, 0). The response at the time was to use a different window or switch to advanced graphics application. I don't like either of these options, because much cheaper calculators have not this problem.

  With a little experimenting, I found that the calculator will be graphic curves where the absolute value of the slope (derivative) is less than about 375 * (Ymaximum - Yminimum) / (Xmaximim - Xminimum) where the minimum and maximum levels refer to the values specified in the configuration of the land. When the curve is steeper than this amount, the curve has holes and gaps until this value exceeds of approximately 1500 *(Ymaximum-Yminimum) / (Xmaximim - Xminimum). At this higher value, the curve is usually not in graphic form at all. These expressions are based on the study of graphs of the polynomial given above, y = 1 / x and y = e ^ x for different values of configuration of land.

  I realize with the option of touch screen on the first HP for the graphics window resizing, calculator, developers should be a little more sophisticated in how to get the calculator determine the graph. The current 'Adaptive' method is too risky for me to use unless I know a little on the chart. And the graphic progress is too slow. HP working on another option or is there maybe a setting on the computer I do not use its full potential?

  I've only used the calculator for a few days, but others who have used the calculator for many more are also puzzled. Thanks for any info. You can send our way.

  It is currently being considered. I can't say when / if there will be changes, however on the political basis of HP on 'future-looking '.

  However, graphical representation is one of those things that is "deceptively simple" because it seems to be pretty easy but is actually infinitely difficult. It has in fact been mathematically proven that you * don't * create an algorithm to be quite accurate for the same simple algebra. All graphics engines turn example is a very simple method that collapses quickly for something else then the case of some, it's well, a series of different behaviors for different types of problems in an attempt to account for different types of situations.

  The average general graphic has been done in the past was "moving pixel, evaluate and connect the dots." This works for simple things, but falls apart pretty quickly. Most of the calculators except the first on the market at the present time use some techniques of "smoothing" kind of hide the types of problems, this method can generate and generally work well for simple cases. While that hides things, the problem is he hiding things. :-) In more complicated cases, it actually makes things quite worse.

  In this simple case, most of the systems actually get the "right" result because they always assume that a big jump in values one line drawn to connect them. Result directly in other cases where it draws a vertical line to an asymtote that shouldn't be there. That's why things like Tan (x) go very often vertical asymtotes where there shouldn't be any. To try to avoid this, you need the code to make a special analysis in the case of start trying to filter false positives. It seems that in this case, it is bad filter and eliminate the line here.

  For another thing of pleasure, try the example simple "sin(e^x)" on all your systems. You will get some pretty crazy things and strange patterns here where there should not be any. The "speculative", the first will be closer, but only the grapher advanced with its graphics of interval it gets correct.

  So in short, yes - you put this to our attention. In long, graphic representation is in fact much more complicated then one might expect. :-)

• First Graphing Calculator Identification of old Version of main material has

  Hello

  I tried to update the firmware to the latest version (2014-07-02 (6031)) on my graphing calculator of premium without success, the release_info.txt file which indicates (for 2014 03 31 (6030) firmware version):

  There is limited between that backward compatibility and earlier releases.

  First older hardware (revision A) supports this version, but the stream without thread-to-unit and data functionality is not supported on previous models. In the first screen HP help > revision of material appears with the software version information.

  How will I know if my calculator hardware number is A revision material?

  Is the version of CASE the number of material?

  Thank you very much

  H.

  Hello

  All primes of HP are upgraded to the version 6030 (note that 6031 is for PC emulator only). It's just that the material has a problem with certain communications.

  Firmware version prior to 6030 (5447 and older) do not show the hardware version in the display 'a way'.

  When you upgrade to 6030 the hardware version will appear on the display 'a way'.

  Alternatively, you can determine the version of the material from the model number (located on the back of the box she approached, the bar code):

  NW280AA is A revision material

  G8X92AA is the review material C

  In addition, the following process is recommended for the upgrade of the premium:

  Install the connection from the CD Kit.

  Once installed the connection, update the calculator.

  The following method is recommended:

  • Connect your HP Calculator first via the supplied USB cable (connected directly, do not use a USB hub)
  • Start the HP connectivity Kit
  • Click the tab of the calculator
  • Right click on the name of the first HP you want to update (it would be that you connected before starting this procedure)
  • Write down the version number, and then click the OK button
  • Click the Help Menu and select Check for update
  • Look for the pop-up box to update, check the version number that is newer than the one you want to update.
  • Then click on the download button
  • That's it, you will see the update being loaded and installed on your calculator screen. Don't click too quickly out of the HP Connectivity Kit, wait a minute or two after the completion.
  • In addition, there are a step in the connectivity Kit where it is advisable to back up the version that you had before the procedure, just in case. This way, you have a way to cover again.

  Kind regards.

• HP 50 g - graph of the function of library

  Hello

  I try to graph for example the distribution function UTPN (cumulative normal distribution) with two parameters set and the third as a variable. I tried in vain in the 2D/3D window (ALG mode):

  (a) entering the function UTPN (0,5,X). When I want to type () (shift + left) it emits a beep and no way.

  (b) entering the function utpn (0,5,X). It accepts input and tries to graphics, but only the axes appear. Looking at the TABLE, I see all the Y1 is "error".

  (c) entering the function using CAT and choosing the function UTPN in Equation Editor. He gives... too "little arguments."

  How can I accomplish this?

  Thanks for the responses,

  Franz

  Thanks a lot, it works great

• Pavilion g6 - 2379sr: graph Pavilion g6 problem

  Hello!
  
  I have problems with my HP Pavilion g6 - 2379 sr video drivers.
  Windows 8.1 operating system (x 64)

  Graphics card: Intel HD 4000 + AMD 7670 M

  When I first installed Windows 8.1, my Intel HD graphics drivers and AMD, the two came via WIndows update, everything worked, except fans made a lot of noise even when the PC is idle. I was suggested that I should install the official graphic drivers by manufacturer. So I downloaded the AMD drivers (which should include the drivers Intel aswell)
  on the site of HP my laptop support specific. And now the fun part begins, applications that turned 55 frames per second before, now, is down to only 3 to 5 images per second, no matter what gpu are assigned.
  I have no object in the BIOS settings related to switching of graphs, and no BIOS update is available for my laptop running WIndows 8.1 (there are updates to the BIOS for windows 8, but I'm not sure if I should use this driver for the update).

  Device Manager indicates that two graphics cards work fine, but of course, they are not.
  
  Any kind of help would be welcome!

  Solved my problem!
  
  Apparently the drivers for HP support are not the best choice!
  What to do if someone has the same problem:
  
  1. download the latest drivers Intel HD of the Intel Download Center (make sure that the drivers downloaded matches your Intel processor generation).
  2. download the latest AMD catalyst AMD Download Center.

  3 disable internet access for the entire process stop windows update to automatically install the drivers. (do not enable internet access until all the drivers were re-installed manually).

  4 uninstall the Intel HD drivers via the control panel - uninstall programs.

  5. restart the PC.
  6. express uninstall all the drivers AMD via Control Panel.

  7 restart the PC.

  8 install the Intel HD drivers.

  9 restart the PC.

  10 install the AMD drivers

  11 restart the PC.

  12 turn on the internet connection.

  Now you should be fine, also fixed my problem whitch I previously had on fan makes a lot of noise all the time.

• First HP axis line bug in Boolean expressions (Adv. Graphing App)

  When the graphic representation of an inequality and excluding a part of it using Boolean expressions, there is a bug where the first will be graphic axis lines are part of the solution by using 'AND NOT '.

  An example of this is that if you were to graph a circle of RADIUS < = 5 and remove a circle of RADIUS < = 4.

  Example:

  V1:=(X^2+Y^2<=5^2) AND NOT (X ^ 2 + Y ^ 2 < = 4 ^ 2)

  Axis lines X - there exist in the excluded (X ^ 2 + Y ^ 2 < = 4 ^ 2) and can be traced back as if it were part of the solution of V1.

  Interestingly, if V2 is set to be equal to V1 (X - 0.5, Y - 0.5), axis lines are no longer aligned with the axis of the grid, but are rather shifted-0.5 on the X and Y as well as the rest of the V2.

  In this case, the equation can be modified to work around the bug by removing the NOT and change the sign of the circle radius 4-more of:

  V1:=(X^2+Y^2<=5^2) AND (X ^ 2 + Y ^ 2 > 4 ^ 2)

  Does anyone know if there is a reported bug?  Where I might be able to look to see a list of known issues?

  Thanks for the detailed examples. It took me a while to see what you were talking about, but once I did I had the info the graphic calculator expert.