Another case of player XI crashing after start

Similar Questions

• InDesign crashes after starting from Sierra update [URGENT]

  Hello

  on my MacBook Pro, InDesign crashes immediately after the start from Sierra has been installed.

  1 uninstall and reinstall do not solve the problem

  2 setting the menu bar auto-masquage did not help.

  If someone has an idea, I would be eternally grateful...

  Personal Adobe > please help, I need to finish a project quickly.

  Kind regards.

  OK in my case, that it is related to the RAID used on my computer, with which Indesign 11.4.1 problems, known by developers.

  Easy solution: uninstall 11.4.1, install version 11 and install the update to 11.4 and NOT 11.4.1.

  11.4 works well.

  Thanks to the team of Adobe support for this solution.

• Tecra A4 - freezing / crashing after start upward

  Hello

  My Tecra A4 is nearly 3 years old and over the weekend, it just started to freeze within minutes of the start.
  The point at which the machine crashes seems to be when all the various treatments start are completed. The hard drive seems to be stopped and at that time there it freezes.

  I managed to make it work for more than start a full crawl. Sounds weird I know, but as long as the hard drive is active the machine seems ok.
  It is still then up to a point and freezes leaving me with the only option of the laptop off the power by pressing the power button. Oddly enough, I didn't press the power button I have to just tap on it and the machine switches off completely. The longest, I got it to work for since is so fortunately I managed to copy 20 minutes on all my photos etc.

  I thought to try the recovery disk, but as I'm not sure why it freezes so I do not know if this will help?

  Any thoughts would be greatly appreciated.

  Mark

  No one will be able to say exactly why your laptop freezes.
  Perhaps only the operating system is confused upward and therefore, it does not work properly. This should be checked permanently.

  But in my opinion, the laptop crashes because of the higher internal temperature.
  Perhaps the highest temp affect that the memory modules and this would lead to these symptoms of the computer.

  I had something like that on my old laptop and one of the modules was of damage due to heat.
  I replaced the modules of memory, clean the cooling fans and fans using a jet of compressed air and the laptop works fine now.

  In your case perhaps only cooling grids cleaning would be necessary.

  Check it out!

• Windows Media Player 12 crashes after each track when ripping a CD, then crashes at the end of the disc.

  I've recently updated to Windows Vista Home Premium to Windows 7 Ultimate - it was clean install and most things work very well. One of the most common things that I do on my PC is rip CDs and Windows Media Player 12 seems much slower to do what Windows Media Player 11 on Vista. The big problems I have are:

  1 after each track has reached 100%, WMP12 freezes, said the top of the window (not responding) and after about 30 seconds, it moves to the next track.

  2. This continues for each track, until it reaches the last track of the CD - when it reaches 100% on this one, it freezes again and still average forever (or at least until that my patience runs out!). Then I have to close WMP12 that triggers a dialog box saying "the program is unresponsive"-choose "Close the program" and closed WMP12. When I restart my album WMP12 was torn with success. Adding album art using the right click "paste Album Art" feature is just as slow compared to WMP11 on Vista.

  Please note: I initially thought that these delays were because the destination music folder Rip is a drive network hard (although WMP11 was ok with that) so I changed the destination music Rip in a local folder - C:Users\Public\Music - and the fault still happening.

  Does anyone - especially someone of Microsoft - can help with this. Using WMP12 was one of the things I was most excited by my Windows 7 upgrade and it's really disappointing.

  Thank you

  Brett

  SYSTEM: HP Pavilion Elite running Windows 7 32 bit Ultimate edition, AMD Phenom 9500 2.20 GHz Quad-Core processor, 4 GB RAM, 1 TB of disk hard of the shipped. Media stored on a WD World Edition 2 TB of disk network accessible through Devolo dLAN 200 AVeasy Mbps home candles of Xbox 360 Elite and WDTV Live HD Media Player.

  I suggest that you try to reset the media library. Note firstly reset the library will make you lose all play counts and ratings too. Then, follow these steps:

  -Restart the PC.
  -Click Start, type services.msc in the search field and press ENTER. In Services, locate the Windows Media Player Network Sharing Service . If its status is started , double-click the service, and then click stop .
  -Click Start, type %LOCALAPPDATA%\Microsoft in the search field and press ENTER. This folder opens in Windows Explorer.
  -In this folder, rename the folder Media Player as Old Media Player . If you do not see the folder, then it is probably hidden. Set Explorer to view the hidden files and folders and show protected system files.
  -Launch WMP, your library will have been reset and will be rebuilt. Check if the problem persists. Tim Baets
  http://www.BM-productions.TK

• First Flash Player in FireFox after start total Casuses freeze except excessive action HD for 5 seconds

  Especially anytime I boot vista and use firefox to load the first page of interest of any Flash Player on this page, the Computer freezes.

  My mouse to tail (on the screen) will have multiple pointers, showing that the action of the mouse on the screen's show and then suddenly stops leaving the mouse pointers of 4-5 spread on the screen.

  When I say freeze, I want to say keyboard does not work, no option to see taskmanager, possible extra mouse no movement, no keys work.

  Then, it does nothing except totals action HD for several seconds (5) and then after that, everything is ok.

  I took the time that this has happened (looking clock screen) and returned with a search for the Explorer for the date and time to find all the files that had we created or modified during this time - nothing has changed - so the other question is how is it, nothing has changed when my HD was going ballistic (solid green light)?

  Since then I uninstalled FP in FF and removed my computer adobe.

  Thank you for your interest

  Upgrade to Firefox (26)

• DVD player not recognized after starting in windows server 2003 r2

  I installed Windows Server 2003 R2 Std on my HP DL180 G6 by using the internal DVD player, but after booting into windows, the DVD drive could not be recognized and it's showing in the 'PCI device' Device Manager under "Unknown device" with a yellow question mark. I googled and tried some of the solutions, also tried to reformat and reinstall Windows, but still facing the same problem. HP support gave me some solutions like updated BIOS, erasing the CMOS memory, unplug and plug back the sata cable, but always without success.

  Hi Lilida85,

  The question you have posted is related to Windows Server 2003 R2 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  Windows Server

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Outlook Express 6 (Windows XP Pro) keep crashing after start-up.

  When it crashes at startup, it freezes when receiving mail electronic (no email is downloaded).

  See if you can get OE open and in tools | Options | General, uncheck the box: check for messages at startup and check for messages every X minutes. It's probably the gel in the poll for messages.

  Create a new identity, you probably have the corruption of dbx files. Make the new identity by default value.

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

  ***********************

  To avoid this in the future:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Dreamweaver 8 crashing after start-up

  I had this problem a few weeks ago and the culprit was a corrupted file, but for the life of me I can't find the site that explains how to fix this. It was recreate a Site definition folder (or Cache, I don't remember) and replacing the old. I was exploring to do this as DW8 does not completely start.
  
  If anyone knows what I'm talking about can lend you a hand please? I have to get this up and running again.
  
  Thank you
  

  After much research I found that the place to go to fix the problem is in your Application Data folder. Simply navigate to this place (Windows only)
  The documents and Settings\ username\Application Data\Macromedia\Dreamweaver 8\Configuration\SiteCache

  In the cash site folder delete or rename the site definition that is suspected to have caused the problem. Launch Dreamweaver 8. The site cache will be rebuilt and you're back in business.

• Yet CS6 crashing after start build Blu - Ray

  The project burn on a DVD perfectly but will not burn the project directly on a Blu - Ray player or even create a folder of Blue-Ray. I used the "check project" and everything seems to work smoothly. I tried to remove sections of the Menu/assets, then export, without success. The build will fail at the launch which makes me think it's a bug.

  Thanks for the help!

  When still an adjustment, rebuild the project from scratch (except for the menus, you can save them on the hard disk of the old project.

• Photoshop crashes after starting with white window

  

  When I run Photoshop I see this after a few seconds. PS is then not answer and I have to force her to leave.

  Once I could see the window as "Participate to improve" but I couldn't click it as PS freezes again.

  Mac OSX Lion mountain with all updates, freshly installed 2 days ago. Photoshop has been installed twice intant. I already deleted the preferences to check if this is useful, but same thing happens again. To be sure this isn't one of the custom brushes I have re installed PS

  

  How do I get rid of the window or how I can fix this problem?

  Thanks to you all

  Hi Bonepenonline,

  Please open Photoshop root account and check if its not working here.

  New user account: http://support.apple.com/kb/ht1528

  Kind regards

  Romit Sinha

• Computer FREEZES / Crash after startup or start-up

  Hello! It's a little frustrating and I had to post this with the help of another laptop because my laptop ASUS freezes/crash after starting and also during the login screen! It's like when I open and enter my password, and enter the screen and click on any program, it will just freeze and hang there! And I couldn't do anything with it! LIKE NOTHING! Nothing, I need to force close by pressing the power button for a long time and makes many times because I wanted to check whether it is really something bad ~ it's been a week but I still can't use my laptop :( The most frustrating thing is, I can't even use the recovery options! The first time a blue screen for the recovery options showed that I had the chance to choose because it froze again!

  I tried to restart my laptop and went into the advanced boot options and you click on RESTART NOW to make that screen again, but UNFORTUNATELY, the TROUBLESHOOTING option does not show! Only the choices available are "CONTINUE and EXIT to WINDOWS ' and 'TURN OFF VOLTAGE the COMPUTER '.

  I wanted to choose "Automatic repair", but given that the TROUBLESHOOTING Option does not appear it seems I have no choice. I tried several times but no luck if I had to choose REFRESH PC but another problem is in place! -_ - I don't know how! I clicked REFRESH PC and selected FOLLOWING, but he said, "COULD NOT FIND THE NECESSARY THAT WE are looking for" something like that so he can't go!

  Please help me :( I have no media recovery, so it is impossible to make the alternatives recommended on internet, I don't want to lose my files. TT__TT please help me. I really appreciate your answers! Thank you so much! ^ _ ^ You're cool!

  You can get the recovery media that you need here: http://windows.microsoft.com/en-US/windows-8/create-reset-refresh-media

• Crashing immediately after starting

  Hello

  My computer crashes immediately after start upward. Sometimes I have the chance to actually click on something, but usually it will freeze just upward before I can do anything whatsoever. I'm running it in SafeMode right now and it works completely fine. Any ideas on what I can do?

  Follow these steps to exclude material failures.
   
  Type of memory in the start search box, and choose Diagnostic memory. This will
  take a few minutes.
   
  In computer discs right click and choose Properties, then the Tools tab.
  then click on check now. Check the TWO boxes and then click Ok. Reset. This will take
  from one day to the next.
   
  After running chkdsk (what does the foregoing) checks file
  corruption by clicking on Start - Programs - Accessories - right click
  Command prompt and choose Run as administrator. Type
   
  sfc/scannow
   
  You can clean clean boot
  http://support.Microsoft.com/kb/331796
   
   
  --
  ..
  --
  "Casey Polon" wrote in message news: ee0fe058-d881-40f3-a9ef-c2c0ae5d0936...
  > Hello,
  >
  > My computer crashes immediately after start upward. Sometimes, I had the chance
  > actually click on anything, but more often it just freeze before
  > I can do anything. I'm running it in safe mode now and it works
  > quite well. Any ideas on what I can do?
  >
   
   

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• BSOD a few minutes after starting. And another after entering IE.

  Wake up BSOD a few minutes after starting.  Then I start and it's OK.  Then when I go into IE I get a new one.  Then, everything is OK for a long time (often for the rest of the day).  Trouble started when I downloaded Firefox, while IE was found to have a big security problem.  Download problems.  Tried to go back to the previous state good.  Still getting BSOD.  Then I backed up all personal files, reinstalled windows 3 times!  Still no luck.  Updates seem to work.  I have no material on it, more just printer, keyboard, mouse and speakers.  Something about a Bad pool caller and something on a manually initiated crash appear to be the most common BSOD.  Anyway, I don't understand all this.  I tried to talk with Microsoft technical support, but they could not help and indicate that it could be the hard drive itself.

  Someone at - it look at my https://onedrive.live.com/?cid=7C2BA0B8D210B559&id=7C2BA0B8D210B559%21105 minidump file

  And I would like to know if this is something that I can fix it or do I have to take the whole thing in a shop for repair.

  Thank you!!!

  Linda

  Hi Linda,.

  BAD_POOL_CALLER (c2)

  This indicates that the current thread is doing a bad pool request.

  4: kd > k
  Call child-SP RetAddr site
  fffff880 '03bf5928 fffff800' 031f2be9 nt! KeBugCheckEx
  fffff880'03bf5930 fffff880'01015431 nt! ExDeferredFreePool + 0 x 1201
  fffff880 '03bf59e0 00000000' 00028000 excsd + 0xa431
  fffff880 '03bf59e8 00000000' 642 d 0 x 28000 0000
  fffff880'03bf59f0 fffffa80 1006475 c 0x642d0000
  fffff880 '03bf59f8 00000000' 00000000 0xfffffa80 1006475 c

  excsd.sys (Diskeeper - ExpressCache) is tempted to rescue the pool which was previously already released.

  Uninstall ExpressCache as soon as possible.

  Kind regards

  Patrick

• Speed Grade crashes on start immediately after each time.

  There is not even for a second. no time to start a project or import a film. It crashes without fail after starting upwards. Have not been able to do one thing with this program because it will not stay running.

  All my other programs CS6 run great. First, After Effects, Audition, etc all smoothly.

  Motherboard Asus X 79 Pro

  CPU i7 3930 K

  64 GB of Ram

  GTX 580

  MUSHKIN Chronos Deluxe SSD boot drive

  MUSHKIN Chronos Deluxe SSD for the Disk Cache

  24 TB raid array.

  Windows 7 64 bit

  All my other software Adobe is stable. Don't remember even when the last crash was on a program of CS6 except fo Grade speed which I couldn't use.

  Is there something not compatible on my computer? He just doesn't have accounts for me. The crash is instantaneous at startup. Of course I tried to reinstall

  firmware Central drivers etc. ran updater adobe etc. Tested the Ram for problems that takes a long time to 64 GB.  5 passes all the memory sticks, with a hitch.

  I you send an email.

  _

  Duy Anh