Answer to all window doesn't wordwrap

Similar Questions

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• After re-installing Vista: error message "Windows doesn't detect any hardware networking".

  On another thread Microsoft Answers, I was advised to do an "inplace upgrade" to Vista to solve a problem I had with the opening of Word documents.

  I followed the instructions but was unable to do the upgrade in place of Vista.

  (The 'Upgrade' option has been blocked during the installation process.  And there is no other choice available "Troubleshooting", even if the directions had mentioned that this could be an option.  There is no workaround solution mentioned about how to proceed where it upgrade when the 'upgrade' option has been blackened.)

  So, I did a clean install of Vista - after saving all my files on an external drive, of course.

  This fixed the initial problem that I ask.

  Now, however, I can't access the internet after you complete this process.  I tried via wireless and services to broadband.

  Reads the error message: "Windows doesn't detect any hardware networking."

  How do I fix this?

  Thanks in advance.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Pinned tabs on all windows

  When I close the firefox window that contains a pinned tab before my other firefox windows, pinned tab does not open the next time I start firefox. (I chose "show my windows and tabs from last time"). Therefore, it would be nice if it was possible for the tabs pinned to:
  be on all windows.
  be on the active window,
  or transferred to another window when the first window is closed.

  Is this possible? This is for a future version? Thanks in advance for the answers.

  You can have different sets of tabs pinned on each open window.
  
  Better is to get used to using Firefox > quit to close Firefox and not the X close in the title bar to make sure to close all open windows at the same time.

  • Tab initializer App: https://addons.mozilla.org/firefox/addon/app-tab-initializer/

• ALL WINDOWS OPEN WITH 3 IN A WHITE PAGE AND ON THE SIDE STRIP IN THE MIDDLE

  I HAVE TRIED EVERY THING TO SOLVE THIS PROBLEM, EACH WINDOW, I OPEN, IT OPENS WITH A BUNCH OF 3 INCHES OF WIDE WHITE ON EACH SIDE AND THE PAGE IM TRYING TO LOOK IN THE MIDDLE OF THE SCREEN FOR EXAMPLE WHEN I OPEN YAHOO TO CHECK MY EMAILS E HOME PAGE IS DISPLAYED IN THE CENTER OF THE SCREEN WITH A 3 INCH STRIP WIDE WHITE ON BOTH SIDES OF THE SCREEN. HOW DO IT SO THE PAGE FILLS THE SCREEN WITH ON STRIP 3 INCHES ON EACH SIDE

  Hi CWALKERALA,

  1 when was the last time it was working fine?
  2. did you of recent changes on the computer?
  3 - is only Internet Explore or all windows?

  Please provide us with more information about the issue to help you!

  If possible send us a screenshot of the issue to better understand.

  You can also see question persists in safe mode or not.

  Steps to start in safe mode
  1 restart your computer if it is running.
  2. press the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Startup Options , you can stop tapping.
  4. use the up/down arrows to select your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Restart the computer to return to normal mode

  If the problem is that with Internet explore, you can reset the default browser settings and check.

  For more information please visit the link below.
  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737
  Important: Reset Internet explore its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Excel display all windows in the taskbar is enabled, not all on the taskbar

  In Windows 7 Excel, the "show all windows in the taskbar" is selected; However, only a single file displayed on the taskbar.

  Hello

  Please contact Microsoft Community.

  We have a dedicated team to support issues related to Microsoft Office Excel. I suggest you to report the query in Microsoft Office Excel queue for assistance.

  http://answers.microsoft.com/en-us/office/forum/officeversion_other-excel-os_device_win7?sort=lastreplydate&dir=desc&tab=Threads&status=all&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=Questions&tm=1432638825052

  Hope this information helps.

• How to get assistance from mozilla to answer questions for windows when I use a macintosh computer

  How to get assistance from mozilla to answer questions for windows when I use a macintosh computer?

  Look on the right side of the knowlegde base articles, where it is said ' help to ". Here, you can change the operating system and the version of firefox. The content of the article will adjust.
  
  If you ask a question on the help forum, you can simply say this in your question.

• Gigaframe L80 - Windows doesn't recognize it as a second monitor

  Hello

  I have a Toshiba Gigaframe L80 but is not fully functional.
  Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
  Only works in clone mode.

  I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.

  Can you help me?
  Is there a driver/software/firmware for the L80 was updated to fix?

  Anyone with the same problem?

  Hello

  I found this info:

  Sub visualization allows the Gigaframe to act as a second monitor for your PC
  To activate the view Sub follow these steps:
  (1) install subview on the laptop.
  (2) in the main menu of gigaframe select settings, then press OK
  (3) select subview and press OK
  (4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
  (5) connect the GigaFrame to your PC with the supplied USB cable
  (6) run the subview on your PC software
  (7) the display of Sub pop window, display the current screen display in the gigaframe

  By activating the function void View the willing Gigaframe of two display modes:
  Scope and the Clone mode.

  To assign the suffixe_etendu mode_ Gigaframe follow these steps:
  (1) right click on the desktop and select properties from the menu
  (2) in the display properties panel select the settings tab
  (3) under the view drop-down list, select 2. default monitor on Subview
  (4) check the option extend my Windows desktop on this monitor and the bottom of the settings tab

  Note: in extended mode screen gigaframe becomes your office extensions!

  To set the Gigaframe in _Clone mode_ follow these steps:
  -Uncheck the extent my Windows desktop on this monitor option!

  The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!

  Love let you subview job function properly, please consider to stop your acceleration DirectX function! _

  If you want to play the video on the Gigaframe, you must select it * as primary monitor! *

• What is the command of shortcut for all windows get the information from the computer?

  What is the command of shortcut for all windows get the information from the computer?

  instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

  just a command for windows xp, vista, 7 for system looking for information....

  original title: what is the SHORTCUT COMMAND to get information from the computer system?

  Hello BlackSecret,

  The keyboard shortcut to get to the top of this information is Windows key + break Attn.
  
  
  Who does what you ask?

• There was a new threat for IE, and on May 1 2014, microsoft announced a one time fix for all windows XP systems

  There was a new threat to IE, and may 1, 2014, microsoft announced an a time difficulty for all Windows XP systems, but I can't seem to get the updates of windows to work. Anyone out there who can help me, need to pay you for this download

  Hello Barry,.

  Update IE KB2936068 updated my copy of Windows XP this morning with no problems. And no, I didn't have to pay for the download.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Impossible to uninstall Google Chrome. "Close all windows and try to uninstall.

  Original title: try to uninstall google chrome it says first close all windows, but can not find open windows

  trying to unstall google chrome it says close all Windows Google canfind first everything in the open wind

  I faced this problem too, but I realized what the problem was.

  Open the Task Manager and there you can find on Google Notifications running in the background.

  Put an end (END TASK) and then try to uninstall chrome, it worked in my case.

  NOTE: apart from this, you can find a few other tasks of chrome running in background.

  Usually, they would have the Chrome icon, but sometimes, in the case of Notifications, the icon is different.

• Windows doesn't detect any network hardware... HELP Please

  Hope someone can help me...

  I have a HP Pavilion g6 and have been able to connect to the internet wirelessly with no problems. So far!

  I have two user accounts on the laptop, Mine which is the main and also a guest account. I am able to connect to the internet and so post this message on my own account, but when I try the guest account which was also connected to the internet without any problem has now suddenly stopped working...

  This message is displayed: Windows doesn't detect any hardware networking

  but I can connect to the internet very well on my user but not on the other...

  Any help?

  Thank you

  I highly recommend to disable the guest account.

  You use a malware antivirus\anti product when you are connected to the internet?

  Best regards

  ERICO

• How to turn off all Windows sounds?

  I would like to work in a quiet environment.  So I would like to turn off all Windows sounds without going through each of them via Control Panel-> Sound and defining each and every one of them (no).  I don't want to rely on turn off the speakers I could forget often because I do not use the speakers every now and then to use practice.

  If you want to silence your system completely, you can simply click on the volume icon and then select Mute.

  Now, if you want only to silence the sounds of Windows, open the Control Panel (large or small icons) and select audio, select the sounds tab. Under his regime to No. soundschange, at the bottom click on apply then OK.

  Kind regards

• Microsoft have all Windows 7 OEM ISO downloads and buy an a microsoft certified provider ok OEM key?

  Microsoft have all Windows 7 OEM ISO downloads and buy an OEM key provider Microsoft Certified OK?

  What I hear for question 1 is it a new Digital River (Microsoft ISO download service) since you can now no longer download the Iso of Windows 7 from Microsoft unless you have a retail key.  Question 2 is explicit thanks.

  No, there is no key only option sanctioned by Microsoft, so be prepared to find the rejected key if you try to download the ISO. The PID is actually built into the authorization key, all other sent by e-mail is meaningless

  Microsoft are selling more than Windows 7, all real dealers withdrew the product.

• Show all windows

  I found a personalized on my logitech keyboard, which will show all currently open windows, placing them adjacent to each other and scaling the dimensions of the window, then all the windows will be adapted to the screen. The function is similar to OS x expose feature "all windows". What is the keyboard shortcut to trigger this function? that is the windows button + tab. And is there a way to customize this function to be triggered by another action of keyboard or mouse.

  Thank you.

  I found a personalized on my logitech keyboard, which will show all currently open windows, placing them adjacent to each other and scaling the dimensions of the window, then all the windows will be adapted to the screen. The function is similar to OS x expose feature "all windows". What is the keyboard shortcut to trigger this function? that is the windows button + tab. And is there a way to customize this function to be triggered by another action of keyboard or mouse.

  Thank you.

  Hello

  Here are the options that you can access by clicking on an empty spot in the taskbar.

  There are 3 options, see the Windows Cascade, stacked and side by side. After selecting one of the following options, right click again on the taskbar displays an Undo option for this selection.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP