AnyConnect VPN licenses

Similar Questions

• ASA 5500 x new anyconnect VPN license structure

  I wonder if anyone can give me some insight on the new ASA VPN (SSL VPN) structure of license.  Currently, I have anyconnect premium license installed on the ASA 5500 series but want to buy the same type of license for x ASA 5500 series.  I understand the premium license is required for SSL VPN and webvpn.  Can someone find out if the premium anyconnect and anyconnect essentials license has been replaced by the Cisco Anyconnect Apex licence?

  The new AnyConnect Apex maps old Premium licenses. They are now focused on the term (1, 3-5 years) and have been approved by a single user (regardless of the number of devices) vs. concurrent users on the old regime.

  Apex (or the old premium) is required for clientless SSL VPN. Regular-based on the SSL VPN client AnyConnect requires no Apex but can be done by using only more licenses.

  The new AnyConnect Plus is the old Essentials plus mobile licenses. There is an option of perpetual and based on the duration.

  By single user licensing is a terms and conditions / EULA stuff and not enforced by technical means at the moment.

• AnyConnect VPN license on ASA 5510

  Hello

  We have ASA 5510 IPS with basic license. We must now Anyconnect support for more than 2 users.

  Anyconnect (tunnel mode) but essentially Anyconnect license enough? Do need me a license for SSL VPN peers?

  What about Anyconnect without customer, I see that I need a premium license?

  This one is pretty ASA5510-SSL50-K9? It's really expensive compared the Anyconnect Essentials.

  Here is my worm out sh:

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 50
  Internal hosts: unlimited
  Failover: disabled
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 0
  GTP/GPRS: disabled
  SSL VPN peers: 2
  The VPN peers total: 250
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: disabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes a basic license.

  Yes, AnyConnect Premium includes all the SSL features (including the complete tunnel mode AnyConnect - which is what sustains essential AnyConnect).

  So if you buy the 50 user for AnyConnect Premium license, you can have up to 50 SSL VPN connections, if they are the combination of all without customer, or combination of tunnel without customer and full, or just full tunnel. All with a maximum of 50 simultaneous SSL tunnels.

• ASA 5510 Anyconnect licenses with Cisco Anyconnect VPN IP phone

  Hi, hoping someone can shed some light on what I'm just more confused over trying to get by. Not sure if this goes in the section IP Telehpony or here...

  We have an ASA 5510 with the base license. We need to install IP phones to home teleworkers, and I understand there are Cisco IP phones that have built-in VPN clients to enable a tunnel to the central private network. IT seems that you can't use Anyconnect VPN to do this, and I am trying to establish what upgrade licenses, we must apply to the ASA, as both Anyconnect licenses that you get for free on the SAA is not enough.

  This is the phone that we seek;

  http://www.Cisco.com/en/us/prod/collateral/voicesw/ps6788/phones/ps10499/ps11005/data_sheet_c78-603725.html

  I want to know is the Anyconnect Essentials license will work with these IP phones?

  When I do a version of the show,

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 50

  Internal hosts: unlimited

  Failover: disabled

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 0

  GTP/GPRS: disabled

  SSL VPN peers: 2

  The VPN peers total: 250

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect for Linksys phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  This platform includes a basic license.

  It shows "AnyConnect for Linksys phone: Disabled", it is the same for the Cisco IP phones? It is the kind of specific license, should I seek for Anyconnect on IP phones or will Essentials?

  Hi Leo,

  you will need 2 licenses: an Anyconnect Premium license and a permit «Anyconnect of Cisco VPN phone»

  ASA 8.2 and earlier license "for Cisco VPN Phone" has been named "for phone Linksys' it's the same.

  CFR. http://www.Cisco.com/en/us/docs/security/ASA/asa84/license/license_management/license.html#wp1487574

  HTH

  Herbert

• CISCO ANYCONNECT VPN CISCO VPN CLIENT

  Hi, I was in the process of configuring cisco anyconnect vpn for ip phones to our local obtained the license for them either, the question that I get is that I already have remote configured cisco connect via the old cisco vpn client.

  now, if I activate the anyconnect ssl on the same outside the interface both can exist without conflict or maybe I need to migrate users to install the end customer for anyconnect system software to connect.

  I also need help with authentication of certification.

  concerning

  You can run both VPN at the same time without problems.

  However, you should try and migrate everyone to the latest technology Anyconnect SSL anyway.

• Install the client via a browser web w. ANyConnect Essentials license?

  I wonder if it is still possible for individual users install the AnyConnect client by authenticating is via a web browser and allow the web browser to launch the installation, even if the device that the user connects to is running in mode anyconnect essentials?

  In addition, a bonus question: If there are several groups of tunnel and I want the user to know the name of the tunnel group in order to connect (because I don't want to show which groups of tunnel are available), can I force a user to access a specific URL to connect to this group of specific tunnel? I did it with the premium version of the AnyConnect VPN in my lab, but still works for the most part? And what happens if the user starts the AnyConnect client and connects without using the web browser to open the VPN session? The AnyConnect client remember what tunnel group was finally to that specific device or what I have to show which groups of tunnel are available in the AnyConnect client to allow the user to reconnect to this group of specific tunnel?

  Oscar

  You can continue to launch web AnyConnect the Essentials installed with a license. In order to direct users to a particular group of tunnel without using an alias and drop-down, you can configure the group URL. For example, you have a tunnel group called employee and another contractor called. With the group URL, users can access the respective web portal by entering https://vpn.test.com/employee or https://vpn.test.com/contractor. For users who already have the AnyConnect client installed, you can either insert the group above url in the connection box, or you can configure a host name address and the host by using a profile.

• AnyConnect VPN application

  Hi all

  There is a single query on the anyconnect ASA 5510 deployment. We have the ASA 5510 with security more lic. and for lack of run (client) anyconnect VPN for concurrent users. It requires a separate licence for Anyconnect (client).

  5510 a security more lic.

  Firewall settings:

  AnyConnect Essentials: disabled

  AnyConnect Premium: 2

  Max VPN session: 250

  If I run anyconnect VPN it takes max 2 session. But need more sessions.

  Thank you

  Vishaw

  If you just want to use computers to connect to anyconnect using the AnyConnect client and not the clientless SSL, you only need to purchase the license AnyConnect Essentials for the amount of connection you need (supports up to 250).  If you need SSL clientless also, then you must purchase the Premium license.  If you also require that mobile phones, tabs, etc. need to connect to the AnyConnect client, then you need client AnyConnect mobility.

  The following link gives you an overview of the licnenses for the 5510 and other models ASA.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/intro_license.html#wp2142486

  In addition, here Pete does a good job of explaining AnyConnect licenses.

  http://www.petenetlive.com/kb/article/0000628.htm

  --

  Please do not forget to select a correct answer and rate useful posts

• Cisco Anyconnect VPN client cannot establish a connection.

  Hello

  I am trying to connect to my server license from the University. I use 'Cisco Anyconnect VPN', but when it is goinh to initialize the connection it gives me the error "unable to establish a connection to the VPN client. At this point, the network of my Cisco anyconnect adapter gets disable automatically.

  I have no antivirus, and also it happens even when I turn off my firewall.

  Please help me solve this problem that prevents me from my all of the work!

  Thank you in advance.

  In addition to the advice of John I would also look at this document from Cisco for possible help...

  http://www.Cisco.com/image/gif/paws/100597/AnyConnect-VPN-Troubleshooting.PDF

  Cisco help as much as possible...

  http://www.Cisco.com/en/us/products/ps8411/tsd_products_support_series_home.html

  Its also possible you may have to run or reinstall the Cisco client in compatibility mode, if they do not have a version of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/help/compatibility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Otherwise contact your university network administrators may also be a viable option.

  MS - MVP Windows Expert - consumer
  "When all else fails try what the captain suggested before you started...". »

• AnyConnect VPN setup problem

  Hi all, I'm going to have bad configure anyconnect VPN on my router. I'm CCENT pre level and especially followed a tutorial, but feel I'm missing something simple here.

  It's a fairly simple installation on a Cisco No. 2851 - faces of a single interface my LAN 192.168.1.0/24, the other has a public IP address.

  I created a network 192.168.2.0/24 VPN users, mainly to have phones Android connection of their mobile phone networks, and have access to the servers/security cameras/etc by using their local IP addresses. When my phone connects, it gets an IP address and is connected, but is not communicating with my LAN correctly.

  The VPN client can ping 192.168.1.254 (the router's LAN IP) - but not the other devices on the network. However, the devices on my LAN can ping the VPN clients to their address 192.168.2.x.

  Here's a copy of my current config, I have reorganized some elements with #s. Also pasted my ip sh road under him. Do not forget that I am a novice, please forgive the hack :)

  Router (config) #do sh run
  Building configuration...

  Current configuration: 5782 bytes
  !
  ! Last modification of the configuration at 02:24:24 UTC Sat Sep 5 2015 by #.
  !
  version 15.1
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  host name #.
  !
  boot-start-marker
  boot-end-marker
  !
  !
  enable secret $5 1$ 0 #.
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login local sslvpn
  AAA authorization exec default local
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  dot11 syslog
  no ip source route
  !
  !
  IP cef
  !
  DHCP excluded-address 192.168.1.200 IP 192.168.1.254
  DHCP excluded-address 192.168.1.1 IP 192.168.1.10
  !
  pool of dhcp IP LAN
  network 192.168.1.0 255.255.255.0
  Server DNS 192.168.1.254
  by default-router 192.168.1.254
  !
  !
  IP domain name # '.com'
  host IP Switch 192.168.1.253
  8.8.8.8 IP name-server
  block connection-for 2000 tent 4 within 60
  connection access silencer-class SSH_MGMT
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  voice-card 0
  !
  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TRUSTPOINT-MY
  enrollment selfsigned
  Serial number
  name of the object CN = 117-certificate
  crl revocation checking
  rsakeypair my-rsa-keys
  !
  !
  MY-TRUSTPOINT crypto pki certificate chain
  certificate self-signed 01
  ##########################

  #########################
  quit smoking
  !
  !
  license udi pid CISCO2851 sn FTX1026A54Y
  # 5 secret username $1$ yv # E9.
  # 5 secret username $1$ X0nL ###kO.
  !
  redundancy
  !
  !
  property intellectual ssh version 2
  !
  !
  !
  !
  !
  !
  !
  !
  interface GigabitEthernet0/0
  LAN description
  IP 192.168.1.254 255.255.255.0
  IP nat inside
  No virtual-reassembly in ip
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  WAN description
  No dhcp client ip asks tftp-server-address
  No dhcp ip client application-domain name
  DHCP IP address
  IP access-group ACL-WAN_INTERFACE in
  no ip redirection
  no ip proxy-arp
  NAT outside IP
  No virtual-reassembly in ip
  automatic duplex
  automatic speed
  No cdp enable
  !
  interface Serial0/0/0
  no ip address
  Shutdown
  !
  interface virtual-Template1
  !
  local IP 192.168.2.100 WEBVPN-POOL pool 192.168.2.110
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  The dns server IP
  IP nat inside source list INSIDE_NAT_ADDRESSES interface GigabitEthernet0/1 overload
  !
  IP access-list standard INSIDE_NAT_ADDRESSES
  permit 192.168.1.0 0.0.0.255
  permit 192.168.2.0 0.0.0.255
  IP access-list standard SSH_MGMT
  permit 192.168.1.0 0.0.0.255
  permit 207.210.0.0 0.0.255.255
  !
  IP extended ACL-WAN_INTERFACE access list
  deny udp any any eq snmp
  TCP refuse any any eq field
  TCP refuse any any eq echo
  TCP refuse any any day eq
  TCP refuse any any eq chargen
  TCP refuse any any eq telnet
  TCP refuse any any eq finger
  deny udp any any eq field
  deny ip 127.0.0.0 0.255.255.255 everything
  deny ip 192.168.0.0 0.0.255.255 everything
  permit any any eq 443 tcp
  allow an ip
  !
  exploitation forest esm config
  NLS RESP-timeout 1
  CPD cr id 1
  !
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !
  profile MGCP default
  !
  !
  !
  !
  !
  access controller
  Shutdown
  !
  !
  !
  Line con 0
  exec-timeout 0 0
  Synchronous recording
  line to 0
  exec-timeout 0 0
  Synchronous recording
  line vty 0 4
  exec-timeout 0 0
  Synchronous recording
  entry ssh transport
  line vty 5 15
  exec-timeout 0 0
  Synchronous recording
  entry ssh transport
  !
  Scheduler allocate 20000 1000
  !
  Gateway Gateway-WebVPN-Cisco WebVPN
  IP interface GigabitEthernet0/1 port 443
  SSL rc4 - md5 encryption
  SSL trustpoint TRUSTPOINT-MY
  development
  !
  WebVPN install svc flash:/webvpn/anyconnect-linux-3.1.03103-k9.pkg sequence 1
  !
  WebVPN context Cisco WebVPN
  title "Firewall.cx WebVPN - powered by Cisco"
  SSL authentication check all
  !
  list of URLS "rewrite".
  !
  ACL "ssl - acl.
  ip permit 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
  permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
  Licensing ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
  !
  login message "Cisco Secure WebVPN"
  !
  webvpnpolicy political group
  functions required svc
  filter tunnel ssl - acl
  SVC-pool of addresses 'WEBVPN-POOL' netmask 255.255.255.0
  generate a new key SVC new-tunnel method
  SVC split include 192.168.1.0 255.255.255.0
  Group Policy - by default-webvpnpolicy
  AAA authentication list sslvpn
  Gateway Cisco WebVPN bridge
  Max-users 5
  development
  !
  end

  Gateway of last resort is #. ###. ###. # network 0.0.0.0

  S * 0.0.0.0/0 [254/0] via #. ###. ###.1
  (###ISP))) is divided into subnets, subnets 1
  S (# #ISP #) [254/0] via (# publicgateway #) GigabitEthernet0/1
  ###.###.0.0/16 is variably divided into subnets, 2 subnets, 2 masks
  C ###.###.###.0/23 is directly connected, GigabitEthernet0/1
  The ###.###.###.###/32 is directly connected, GigabitEthernet0/1
  192.168.1.0/24 is variably divided into subnets, 2 subnets, 2 masks
  C 192.168.1.0/24 is directly connected, GigabitEthernet0/0
  The 192.168.1.254/32 is directly connected, GigabitEthernet0/0
  192.168.2.0/32 is divided into subnets, subnets 1
  S 192.168.2.100 [0/0] via 0.0.0.0, Virtual Network1

  can you try to disable the FW on your internal lan hosts and then try and ping from users of vpn client

• Lock the AnyConnect VPN with broader access list

  I'm trying to lock my AnyConnect VPN interface. I use the split tunneling. I want only to http tunnel traffic to an external http server we have and ftp to another external server behave. I don't want anything else through the tunnel or anywhere else allowed on our network. My current setup, I can connect to the vpn and the servers ping external ip address, but not by name. I can also not navigate anywhere else while I'm connected. It is not imperative for me to navigate anywhere else, when you are connected, but I need to allow only access specified above.

  Configuration:

  attributes Anyconnect-group policy

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list WebAccessVPN

  WebVPN

  list of URLS no

  SVC request to enable default webvpn

  WebAccessVPN list extended access allow icmp disable any newspaper host FTP - EXT object-group Ping_and_Trace

  External FTP FTP access WebAccessVPN-list comment

  WebAccessVPN list extended access permitted tcp disable no matter what newspaper to host FTP - EXT object-group DM_INLINE_TCP_2

  WebAccessVPN list extended access allow icmp disable any newspaper host LICENSING-EXT object-group Ping_and_Trace

  WebAccessVPN list extended access allowed object-group TCPUDP any LICENSING-EXT eq www log disable host

  WebAccessVPN list extended access deny ip any object-group DM_INLINE_NETWORK_1

  You can use the vpn filter under the attributes of political group. In the vpn-filter, you can reference the access list you created.

• Would become Anyconnect essentials Premium AnyConnect vpn on asa

  Dear team,

  We have a pair of cisco ASA 5520 with version 8.2 (5) works well with active mode / standby. As the situation requires, we intend to change the SSL vpn to clientless SSL VPN (AnyConnect Premium) to anyconnect vpn with mobile clients (IOS & Android)

  Please specify below

  (1) I have read, we cannot have two Anyconnect Essentials & AnyConnect Premium on the same system time. We need to disable accordingly to our need-pl correct me?

  (2) what is the best way to have the device for end-user client deployment? pushing of ASA or install individually on the system? Can I have the best, I mean the latest version of windows, client MAC e.t.c I shud get?

  While pushing ASA LU that much memory cache will be used, since we have IPS (AIP - SSM) modules has also installed on ASA who shud method I adopt here?

  (3) what is the exact product for license Anyconnect Essentials & customer name mobile (IOS & Android) we get from cisco?

  (4) once I get the correct license how do I active in systems? should I remove the failover command and install the license in two devices separately?

  (5) Finally, I need to authenticate vpn anyconnect essentials with LDAP that is already configured for clientless SSL VPN(AnyConnect Premium). any suggestions here?

  Below the version Sh emitted by the devices, it seems essential Anyconnect is already active... Please correct me?

  Active Firewall
  ===============

  System image file is "disk0: / asa825 - k8.bin.
  The configuration file to the startup was "startup-config '.

  Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
  Internal ATA Compact Flash, 256 MB
  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Ext: GigabitEthernet0/0: the address is a493.4ca3.ce0a, irq 9
  1: Ext: GigabitEthernet0/1: the address is a493.4ca3.ce0b, irq 9
  2: Ext: GigabitEthernet0/2: the address is a493.4ca3.ce0c, irq 9
  3: Ext: GigabitEthernet0/3: the address is a493.4ca3.ce0d, irq 9
  4: Ext: Management0/0: the address is a493.4ca3.ce09, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: enabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license.

  =====================================================

  Firewall standby
  ================

  Updated Saturday, May 20, 11 16:00 by manufacturers
  System image file is "disk0: / asa825 - k8.bin.
  The configuration file to the startup was "startup-config '.

  Material: ASA5520, 2048 MB RAM, Pentium 4 Celeron 2000 MHz processor
  Internal ATA Compact Flash, 256 MB
  BIOS Flash Firmware Hub @ 0xffe00000, 1024 KB

  Hardware encryption device: edge Cisco ASA - 55 x 0 Accelerator (revision 0 x 0)
  Start firmware: CN1000-MC-BOOT - 2.00
  SSL/IKE firmware: CNLite-MC-Smls-PLUS - 2.03
  Microcode IPSec:-CNlite-MC-IPSECm-HAND - 2.05

  0: Ext: GigabitEthernet0/0: the address is 6073.5cab.3fae, irq 9
  1: Ext: GigabitEthernet0/1: the address is 6073.5cab.3faf, irq 9
  2: Ext: GigabitEthernet0/2: the address is 6073.5cab.3fb0, irq 9
  3: Ext: GigabitEthernet0/3: the address is 6073.5cab.3fb1, irq 9
  4: Ext: Management0/0: the address is 6073.5cab.3fb2, irq 11
  5: Int: internal-Data0/0: the address is 0000.0001.0002, irq 11
  6: Int: internal-Control0/0: the address is 0000.0001.0001, irq 5

  The devices allowed for this platform:
  The maximum physical Interfaces: unlimited
  VLAN maximum: 150
  Internal hosts: unlimited
  Failover: Active/active
  VPN - A: enabled
  VPN-3DES-AES: enabled
  Security contexts: 2
  GTP/GPRS: disabled
  SSL VPN peers: 2
  Total of the VPN peers: 750
  Sharing license: disabled
  AnyConnect for Mobile: disabled
  AnyConnect Cisco VPN phone: disabled
  AnyConnect Essentials: enabled
  Assessment of Advanced endpoint: disabled
  Proxy sessions for the UC phone: 2
  Total number of Sessions of Proxy UC: 2
  Botnet traffic filter: disabled

  This platform includes an ASA 5520 VPN Plus license.

  Thank you

  1 correct. You can run one or the other, but not both.

  2 since you have the upgrade memory to 2 GB, you should be fine perform web deployment via the pkg file method.

  3. for a 5520, you need:

  L-ASA-AC-E-5520 =
  L-ASA-AC-M-5520

  .. .to the Essentials and Mobile licenses respectively.

  4. on ASA 8.2, you need licenses for both units. If you upgrade to 8.3 + (8.4 (7) recommend at least), you can share licenses between members of a pair of HA. If you choose not to upgrade, just apply the key of activation on the rescue unit, then on the unit activates. You don't need to move on and in the failover configuration. Failover of the rescue unit status will show as ineligible briefly while he holds the new license is not the case of the active unit. Which will be resolved after you have applied the same license on the main unit. (If you were on 8.3 + would not happen at all).

  5. simply create a new connection profile for customers of Essentials by using the same AAA server group.

• Cisco asa anyconnect vpn client mode issue

  Hi team,

  I get my users anyconnect vpn connection failures very frequently and it that comesup.

  Can you please check see the version attached and explain, if I run with licenses right into place.

  concerning

  SecIT

  Hello

  You've got license for 250 users anyconnect so unless you are having more users than this number, it shouldn't be a problem. Debugs could help reduce the problem in this case.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• AnyConnect VPN Mobile disabled 5505 SEC no more questions

  Hi all

  I have a 5505-SEC-BUN-K9, must purchase a license of Mobile Anyconnect vpn.

  For the question now, I was able to active the anyconnect for mobile but the sec as well as features all failed. How can I check the question?

  The devices allowed for this platform:
  The maximum physical Interfaces: 8 perpetual
  VLAN: 20 unrestricted DMZ
  Double ISP: Activated perpetual
  VLAN Trunk Ports: 8 perpetual
  Guests of the Interior: perpetual unlimited
  Failover: Active / standby perpetual
  Encryption - A: enabled perpetual
  AES-3DES-Encryption: activated perpetual
  AnyConnect Premium peers: 2 perpetual
  AnyConnect Essentials: 25 perpetual
  Counterparts in other VPNS: 25 perpetual
  Total VPN counterparts: 25 perpetual
  Shared license: disabled perpetual
  AnyConnect for Mobile: 76 days allowed
  AnyConnect Cisco VPN phone: disabled perpetual
  Assessment of Advanced endpoint: disabled perpetual
  Proxy UC phone sessions: 2 perpetual
  Proxy total UC sessions: 2 perpetual
  Botnet traffic filter: disabled perpetual
  Intercompany Media Engine: Disabled perpetual
  Cluster: Disabled perpetual
   
  Internal guests: 10
  Failover: disabled
  Encryption - A: enabled
  Encryption-3DES-AES: enabled
  Security contexts: by default
  GTP/GPRS: disabled
  Premium AnyConnect peers: by default
  Other VPN peers: by default
  Assessment of Advanced endpoint: disabled
  AnyConnect for Mobile: enabled
  AnyConnect Cisco VPN phone: disabled
  Shared license Premium AnyConnect server: disabled
  Sharing license: disabled
  Proxy sessions for the UC phone: by default
  Total number of Sessions of Proxy UC: default
  AnyConnect Essentials: enabled
  Botnet traffic filter: disabled
  Intercompany media engine: disabled
  Cluster license: disabled

  Have you tried to re-apply your activation key for the license of security more?

  If you don't have it available, you may need to open a TAC case to get worldwide license team to regenerate it for you.

• Calculation of SSL VPN license

  Hello

  I need to purchase licenses for my SSL VPN (AnyConnect) 2901 router, and I would like to know how it is affected.

  If I buy a license 10 users, it is up to the 10 named user, or it is counted by concurrent users?

  If a user connects from a laptop computer and a mobile phone at the same time, with the same username, it counted as 2 user license, or just one?

  Also, AFAIK, the AnyConnect Essentials license is only available to ASA and not IOS routers. Is that still OK?

  Thank you.

  The number of licenses using simultaneous connections, regardless of the associated user ID.

  75 connected both unique usernames or a different user connected of 75 endpoints name would be count as 75 licenses in use. Laptop more phone = 2 users if the connections are simultaneous.

  The Essentials vs Premium distinction is unique to the ASA. Premium features only as a clientless SSLVPN, hostscan etc are not available based on the IOS SSL VPN

• ASA 5505 SSL VPN license update

  Hi all.

  Our ASA 5505 with DATABASE default license allowing only 10 simultaneous vpn sessions (including 2 Anyconnect + IPsec). attached a TXT file with the license information. This Firewall is's use only for vpn access, and we less vpn tunnel vpn IPSec-L2L, anyconnect client SSL and IPSec client access configurations vpn to the top and race walk,.

  We are in terms of upgrading vpn license to archive IPSec 10 and 10 Anyconnect and 1 anyconect mobile VPN sessions in time. so my questions are;

  1. can I buy "ASA5500-SSL-10 =" accounting and to upgrade our ASA 5505 without having to buy "L-ASA5505-SEC-PL =" license of pus of security.

  2. asa use to upgrade only Anyconnect SSL vpn license while keeping 10 vpn IPSec comes with the base license.

  Thank you & you expects value comment

  Thank you

  JCK

  1. Yes.

  2.Yes.

  If you want to keep Clientless SSL VPN you do not want to continue with the addition of the ASA5500-SSL-10 = part. If you can do without client (including the conversion the two existing ones), more economically, you can opt for Security Plus and AnyConnect Essentials licenses. (US$ 800 vs price $1250).

  In both cases, the Mobile requires the AnyConnect Mobile (ASA-AC-M-5505) license.