Anyone running a Cintiq off their w520?

Similar Questions

• I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the doc

  I'm trying to create a PDF file with several signature lines in that anyone can "Sign" by using their digital signature CAC (Common Access Card) active. The goal is to have a single document that people can open, sign on a designated line and save the document (replacing the existing document) and close. Then another person can open the same document digitally sign another area of the form, save it, and close it. So on, and so on. Is there a way to do this? At the end of the day, I would end up with a PDF file with literally hundreds of signatures to enable different ACC everywhere...

  I don't understand what the problem is. In the post of the davidr96549424 on May 8, 2015 07:58 you presented a structure of a correct document. Is the issue of the creation of this structure in a PDF file? For this, you will need an Acrobat, not reader.

  XI in Acrobat, select Tools-> forms-Edit. Click 'No' on the form fields 'detect '. In the tasks Panel that opens, click on "add new field". Select "Digital Signature" and move it to the location in the document where you want to than the appearance of the signature to be. Repeat that for signature fields as you want. Users will sign by clicking on the prepared unsigned signature field which shows the dialog box "sign. Do not forget that as TSN has noted that a digital signature applies to the entire document. The entry in the document where it is is irrelevant. Each next signature covers all previous signatures.

  Your users can also sign a document from anywhere that they want without signature fields already prepared. For this select fill & sign-> work with certificates and the type of signing you want to sign up with. A dialog box that will tell you a rectangle for the appearance of signature rises and after you draw the rectangle of the dialog 'Sign' rises.

  PDF/Acrobat doesn't have a limit on a number of signatures in a PDF document. But! Don't forget that when you open a PDF file with Acrobat/Reader signatures valid all of them and takes time (several seconds - until 10 - for every signature), so if you have several signatures of dozens of their validation open can take a long time.

  I don't know how build you your workflow so that each person signs the same PDF and saves it. Economy runs on the same computer where the PDF is stored. You'll have to decide how to allow different people to have access to the same PDF. They, of course, you may sign this only one-at-a-time PDF.

• Does anyone know how to cancel their account of adobe acrobat?

  Does anyone know how to cancel their account of adobe acrobat?

  Randel salvation,

  Please visit the following link: https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

  Kind regards

  Rahul

• Is there a way to enable LiveCycle forms is visible in Firefox or Chrome without turning off their built-in PDF readers?

  Is there a way to enable LiveCycle forms is visible in Firefox or Chrome without turning off their built-in PDF readers?

  I read an article which stipulates that, in order to view the XFA forms in Firefox and Chrome, you will need to turn off their built-in PDF rendering engine. However, this seems a lot of work for my end users. Is there a way to activate the form to open without turning off their PDF rendering engine built into Firefox and Chrome? Is there a setting somewhere?

  # Third for interactive PDFs of any kind is rare. I don't think that built-in player of the two browsers can handle XFA or AcroForms. Look at (Support XML Forms Architecture (XFA) forms · Number #2373 · Mozilla/PDF.js · GitHub) for more details. PDF is a complex standard, and most viewers have problems enough supporting the basic principles. Of course, you could look at following Adobe LiveCycle server, which allows the rendered HTML of XFA forms.

• Anyone running HP DL 585 G1 with ESX 4.0?

  Anyone running HP DL 585 G1 with ESX 4.0?

  Yes I know that it is not taken in charge in the HCL. I need for the work of Storage VMotion. Downtime will not accept being the customer.

  If I remember correctly, this model has a processor specification that would not be supported in the latest version of VMware ESX (in this case, ESX 4.0)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• Photoshop CC 2014 crash when you open or create new files when running with Cintiq 13HD.

  I have a problem where Photoshop CC 2014 crashes when you try to open or to create a new file while the Photoshop window is displayed on my Cintiq 13HD.
  When Photoshop is displayed on my main screen, it does not crash.

  I am running Windows 7 (64-bit) and have updated my graphics and wacom drivers in their latest versions and Photoshop is completely up to date. (I'm under the 30 day free trial)

  
  Here is the log of the events of the accident:

  The failing application name: Photoshop.exe, version: 15.2.1.257, time stamp: 0x543dbc5e

  The failed module name: atig6txx.dll, version: 8.14.1.6398, time stamp: 0 x 54176130

  Exception code: 0xc0000005

  Offset: 0x00000000000122b7

  ID of the process failed: 0x23dc

  Start time of application vulnerabilities: 0x01d0030b1092334e

  The failing application path: D:\Program Files (x 86) \Adobe\Adobe Photoshop CC 2014\Photoshop.exe

  Path of the failing module: C:\Windows\system32\atig6txx.dll

  Report ID: 61680f48-6efe-11e4-aeeb-bc5ff45851ea

  Next, you need to communicate with AMD/ATI to see why his latest driver is crashing on your system and not on the other user's systems.

• Anyone running McAfee LiveSafe please check version.

  I've got 13.6. Version control is out of the home page under everything down right. The version is for the Security Center itself that so-called account. Also if you run CHECK FOR UPDATES (from the right mouse button on the icon on the Systray McAfee) he says that there is an update?

  I'm "stuck" worm. 13.6 and I need 14.0 worm. that was disclosed by McAfee to solve a problem of Thunderbird and this version is also necessary for W10 apparently.

  Supposedly Dell's worm. 14.0 but has not published, at least I can't find it or update it.

  Does anyone have this version?

  It seems OK, it was just updated today...

  

• Anyone running Windows (Vista or 7) with a SSD having problems with Windows Update? FIXED *.

  I ask this question because I have now two computers with this problem.

  A computer running Win7 and it used to work with the SSD but recently I wipe the drive and reinstall the OS and now it will not update windows.

  The second computer is a laptop with WinVista final.  This machine, I have improved since a physical hard drive to an SSD a month ago.  This time, he made Windows update without problem.  Now all of a sudden it will also not Windows update.

  A third computer in my house that runs WinVista on a physical drive will be the Windows Update now without any problems.

  So the only link I see is the SSD...

  I replied to your other thread on this issue, but in the case where you'd miss it, I copied and pasted what I wrote here.

  FIXED!

  My laptop is fixed and is installing new updates (I probably Jinx it now and it will come with an error).

  What I did ask the help desk where you chat with a microsoft technician, they take control of remote access from my laptop, and after about an hour of playing around with it (I tried to follow what they were doing - many command prompt and things) they have restarted and said it should be good now. I was very doubtful, because it just shows the same page hanging so thought I would not want to go back and ask them again the next day, but I left it overnight and here this morning there were some updates 208 ready and waiting!

  The technician was really helpful, they offered me paid a pension of microsoft (I think they must do this in standard), but I politely declined and they were wearing on fixing it free in any case for me!

  They gave me a few options also, they said that if they had done did not work, then I could try searching with an ethernet cable (sometimes a more stable connection is all you need) or if it does not, they offered me a newer version of windows 7, which had all updates already downloaded if I wanted to do an OS reinstall everything (I said I prefer not the) do that but it was nice to have the option, if everything else has failed). They also said they would offer phone support for free all the reinstall if I need assistance.

  He also confirmed that they solve this problem a lot and it was certainly not an error at the end of microsoft, or anything to do with the SSD/HDD, etc..

  Overall, really impressed with the service of help desk, I highly recommend asking them if you still need help. Go here: https://support.microsoft.com/en-gb/contactus?wa=wsignin1.0# and click on "services and applications" to open a window where you can chat.

  One thing though, once that my laptop had found all of the updates, I clicked on install and it came with the error message 80240016. I Googled, followed the instructions on this link here: http://windows.microsoft.com/en-gb/windows7/windows-update-error-80240016 and it worked perfectly the second time around.

  Just to confirm, now that I've finished writing this post, my updates have completely installed!

  Hope it will be useful to anyone still hurt!

• Cisco Catalyst 6509 and 6513 running config backup to their respective disk0: / Script

  We use a Cisco Catalyst 6509 and 6513 switches in our network LAN and Man.

  Please help me and share the script to take backup of all respective running to their disk0 configuration switches: / per week.

  Kind regards

  Vinay

  Double post.

• anyone running on CentOS 5 6 WCS?

  I ran into a problem trying to install and run the WCS 6.0.132.0 on a new install of CentOS 5 (2.6.18 - 194.3.1.el5.centos.plus)

  After properly installing WCS by using the option "-DCHECK_OS = false ' I tried to start the service of WCS with the startupscript as root, but got the following error:

  [[email protected]/* */ WCS6.0.132.0]# ./StartWCS
  
      Starting WCS
  
      *********************************
  
      The Server seems to be unavailable. The possible reasons are
  
      1. The server is not running yet.
  
      2. The server is hanging.
  
      3  The server has crashed.
  
      If the server has crashed or is hanging
  
      Please report the issue and follow the instructions to restart it.
  
      1. Run StopWCS to stop all WCS processes.
  
      2. Run StartWCS to start the WCS server.
  
      3. If the server still fails to start, or you still get this
  
         message, then reboot the machine.
  
      *********************************
  
      failed to start WCS on startup Health Monitor
  
      Failed to start WCS.  Check hm_launchout.txt for details.
  
      Log files are located under webnms/logs in the WCS install directory.
  [[email protected]/* */ WCS6.0.132.0]# cat webnms/logs/hm_launchout.txt
  
      JAVA_HOME=./../jre
  
      Starting Health Monitor as a primary
  
      Checking for Port 8082 availability... OK
  
      Starting Health Montior Web Server...
  
      Health Monitor Web Server Started.
  
      Starting Health Monitor Server...
  
      Health Monitor Server Started.
  
      [[email protected]/* */ WCS6.0.132.0]#
  [[email protected]/* */ logs]# cat launchout.txt
  
      Invalid OS version detected, can not start Xvfb.
  
      JAVA_HOME=./../jre
  
      Checking for Port 21 availability... OK
  
      Checking for Port 8456 availability... OK
  
      Checking for Port 8457 availability... OK
  
      Checking for Port 1299 availability... OK
  
      Checking for local Port 1299 availability... OK
  
      Checking for Port 6789 availability... OK
  
      Checking for local Port 6789 availability... OK
  
      Checking for UDP Port 69 availability... OK
  
      Checking for Port 8005 availability... OK
  
      Checking for UDP Port 162 availability... OK
  
      Checking for Port 8009 availability... OK
  
      Starting RMI registry on port 1299
  
      Registry started.
  
      DB is already started
  
      Starting NMS Server...
  

  the only mistake I can interpret is the "can not start Xvfb', but my google thing not performance no results for this question, then:

  Anyone here successfully under this configuration?

  Best regards

  -THE

  PS: I realize that this isn't a supported Cisco OS, but I would try it before falling to RHEL

  Editing/etc/redhat-release should allow WCS start.  I run ours on CentOS 5 and I had to make this change.

  Just comment out the line CentOS and add the following Red Hat line.  You will probably need to be root to do this and

  It may require a reboot.  I also after execution of updates to CentOS note that usually back the file changes

  and WCS does not restart.  I keep a copy of the file on the server's desktop, then copy it on after the updates.

  I have not noticed any problems running on CentOS, just thought I'd throw that out there.

  See you soon!

  Eli

  Release of Red Hat Enterprise Linux Server 5 (Tikanga)

  #CentOS version 5.4 (Final)

• can anyone run this script?

  Hi all

  in order to proceed to a reconfiguration of the alarm, I need to get metricId of an alarm by default,

  the problem is, then from a previous test I accidentally deleted some of these alert, so I have to manually recreate but I can't find the metricId that match.

  So, in order to help me, can someone run this script:

  $Name = "unable to connect to the storage.

  $alarmMgr = get-view AlarmManager

  $alarms = $alarmMgr.GetAlarm ($null)

  $alarms | %{

  $alarm = get-view $_

  If ($alarm.Info.Name - eq $Name) {}

  "Write-Host-object' * $alarm.Info.Name:"-nonewline

  Write to $alarm.Info.Name

  Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric:"-nonewline

  Write $alarm.Info.Expression.Expression [0]. Metric

  Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.CounterId:"-nonewline

  Write $alarm.Info.Expression.Expression [0]. Metric.CounterId

  Write-Host-object' * $alarm.Info.Expression.Expression [0]. "Metric.Instance:"-nonewline

  Write $alarm.Info.Expression.Expression [0]. Metric.Instance

  }

  }

  First of all, as is the case, a second time with $Name = "host error.

  and one last time with $Name = 'high-availability Cluster error. "

  The result of these commands will help me a lot to get my alarm

  Thanks in advance to anyone who can help me

  Here you go (host)

  

  and (cluster HA)

  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Why Apple turn off their phones when they are just iPods

  I got iPhone 4 32 GB is two years company Apple told me connect it to iTunes on my PC I did after 31/2 hours connete to iTunes Apple iPod said that they could not fi the phone now, I have lost over 32K photos and all info on my iPhone iPhone 4 all is portable and iPod put together when you unplug the phone cell you have regular ipod as you sell in stores

  Apple didn't turn it off.

  Why do you think that?

• Anyone running ART?

  I was wondering if someone is running Art vs dalvik If Yes, how are you. I have been putting forward and backward. So far, the Art is significantly faster. It just runs a lot smoother. I noticed battery time on art stand is much better. However I noticed that the battery life is better on dalvik under heavy use.

• My watch has an oversized police.  Cannot run or power off.

  Watch is hung with the very large font size which cannot be read.  Sometimes done in the past, but corrected with hook up charger.  It does not restore nose and cannot be turned off.

  Hi Oliver

  On your iPhone, in the application of the watch, go to: My Watch (tab) > General > accessibility > Zoom > disable Zoom.

• Anyone not really 'pleased' with their Turbo?

  First of all, I don't want to turn this into an anti-Turbo or a negative wire.

  I'm curious is that I can't say I'm really pleased and I wonder if there are others.

  I've lived a lot of phones from the G1, Droid, Droid X, 2, incredible, S3, S4, M8, Moto X and probably some that I forgot. I used the Turbo a few months now.

  Before my Moto X (first generation), I was one of those who have always wanted a bigger screen. I now find miss me my Moto X because of the size (and teak). I loved the convenience of slippery in my pocket at the front and not noticing the weight. I can't get used to return to a more grand/more phone heavy which may not be good for my future phone. I'm afraid that with the madness with the new size phones (Nexus 6) that the 4.7 screen size will be a thing of the past. I know that Samsung has unveiled "Minies" If S3 and S4 versions, but I think the specs are lower than the originals. Not a Jack fan anyway.

  In any case, I love my Turbo, but I don't like my Turbo. I'll use it until my Edge allows me to exchange the next year. I hope that we will see another return to a style phone first gen Moto X next Christmas. Turbo Mini Droid anyone?

  So is this the thread of official buyers remorse?

  

  Now that the data and simultaneous appeal has been settled, we are quite happy.

  We both experienced the problem of battery depletion / sudden mysterious IQ initially, but who also still has to come back.

  So no, we're not, not convinced...