Anyone with access to the rim knowledge bases

Similar Questions

• Hello try to configure Wi - Fi wzc service article 871122 in the microsoft knowledge base

  Hello if you can help I have 2 other laptops that work through my wireless no problem so I know that the internet is very good but I also 520 on xp pro dell latitude it asks me to set up the connection Wi - Fi wzc service article 871122 in the microsoft knowledge base can u tell me enymore about this and that I have to do to fix it thx

  Hi paulm_733,

  ·         He has already worked?

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  Follow the steps in the article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Windows wireless and wired network connection problems

  For reference:

  How to troubleshoot a network home in Windows XP

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• problems with access to the FS comments

  I'm a begineer with VMvare and read a lot of documents on this site, but I'm still not sure about whether it is possible or not, according to

  someone who is not the guest user, to access the information stored in the comments SO

  I'm developing a web application for one of my clients, and he wants to set up a guest VM Ubuntu running on the server of its host running a MS SBS 2008 SO.

  If the web application will run on the Ubuntu Server installed as a guest and I'll be the only administrator of virtual machine of Ubuntu.

  My concern is whether we can or not by anyone to access information stored in a guest THEN (Ubuntu Linux) via the file system of the host, through the workstation or directly by the hard file or have it any other way!

  How can I be sure that no one will be able to copy the files I put in the httpdocs folder in the guest PC?

  Of course, I won't share any folder with the host system, but is - that enough?

  Thanks in advance for any help or suggestion...

  Best regards

  Francesco

  Hello, Francesco.

  The way I mentioned refers to VMware Workstation 7.0. I don't know if the versions previous to this product or other VMware products include this feature. I assumed so. I have referred in my first answer. However, I thought VMware Infrastructure to be superior to the workstation and, therefore, also include it.

  In VMware Workstation 7.0, you go to the Virtual MACHINE menu, choose the settings... item, select the Options tab in the settings dialog that appears, and then choose the encryption setting.

  With regard to the question of if you must be an administrator in order to use encryption, I would think so. And I expect an encrypted virtual machine to perform a little more slowly than an unencrypted, but cannot be sure that I have not tried myself.

  Sorry for not being able to provide more help, but I'm sure that experts here will be!

  Good luck.

  Filipe Alves

• Best way to extend the network of Apple using Cat5 and wireless, but with access to the same network

  Appreciate any help here.

  I need to extend my network coverage for the part out of my house where the current signal does not cover.

  I have a Time capsule in the office connected to my Modem and then created a wireless (XXXX) network that connects to the extreme in my front room... .well when I'm in my room before the signal does not increase when I go near the extreme... and maybe it's that I'm still picking up XXX to my Time Capsule wireless network.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5 and therefore the extreme would be able to stream my network wireless XXXX?

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which currently gets no signal... then do cela via Cat5 to the EXTREME at the 3rd device... or must it come directly from the TC?   (and again... the 3rd device will also be able to broadcast the network XXXX?

  Ideally, I want the network to be possible STB and flavours around the House, and I think that the connections between Ethernet devices would accomplish that... but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX wifi network I have printers, VPN, etc all together towards the top on.

  Oh... and 1 other point, I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... is - it possible... and that has to be directly connected to the time Capsule and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Hope that makes sense... but please let me know if you need more details.

  I'm just a Cat5 cable around the House and I was wondering if I can connect the TC to the extreme via CAT5

  Yes. Hate to be picky here, but I hope you'll use CAT5, CAT5e cabling being quite a bit obsolete.

  wireless network and if so the extreme would be able to stream my XXXX?

  Yes

  If I then want to connect to another airport (explicit / extreme or even TC) in the part of my house which gets currently no signal... then do cela via Cat5 to the EXTREME at the 3rd device

  Yes, but it would be preferable to cables to connect the 3rd to the main TC, if that's an option.

  or does have to come directly from the TC?

  No, but it would be better if she could, if this is an option.

  and once again... the 3rd device will also be able to broadcast the network XXXX?

  Yes

  and I think that the connections between Ethernet devices would achieve this

  That is right. Ethernet is always the best choice in terms of performance.

  but I also need the i-devices, streaming boxes etc. around my house to then access the XXXX same wifi network I printer, VPN, etc all together towards the top on.

  That should work well.  However, you may not aware that most of the PC and iOS devices not 'automatically' between different wireless access points as they move from one place to the other.  For example, you have your iPhone near the time Capsule, so he'll be looking for a strong signal from the time Capsule. If you move the close AirPort Extreme iPhone or any other device 3rd... the iPhone usually will stay connected to wireless Time Capsule... even if a stronger signal may be available in another wireless access point. Nature of the beast with IOS devices.

  Thus, with most of the PC and iOS devices, you will have to get used to temporarily turn off the WiFi on the iOS device when you move from one place to the other, then re - turn on WiFi once the device is close to the other wireless access point. The iOS device then generally will pick up the strongest signal from the nearest access point.

  Portable Mac computers will generally do a good job of automatically 'switching' to pick up the best signal of different access points in you walking the laptop around the House.

  I have a cisco 8port 10/100POE switch managed... which I would also like to include in the network to connect to the servers and devices IP etc... It is possible.

  Yes, but the Time Capsule and AirPort Extreme Gigabit Ethernet ports or 10/100/1000, then the switch is going to limit the maximum speed on the network at 100 Mbps when the devices are capable of much higher speed.  If you plan to invest in the installation of Ethernet wiring around the House, then you also want to invent a new Gigatibit Ethernet 10/100/1000 switch, because it will allow up to 10 times faster compared to a 10/100 switch network connections.

  can do this via Cat5 to the EXTREME at the 3rd device... or need to come directly from the TC?

  Yes, but it would be best to connect the switch to the time Capsule if it is an option.

  and could I still use it to take place between the TC and the 3rd Apple Airport device... as above?

  Yes

• WVC210 DYDNS AND PROBLEMS WITH ACCESS TO THE WEB

  I have 2 Configuration for WVC210 cameras on dydns of deleted I can't see them on the web. I can access via the local network using the ip address and port or the dyndns name and port. The router has listed as a virtual server and I even put one of them is like DNZ (outside the firewall of the router), the port check tools show a port opened from a remote location. And I can ping. But I can't connect to the camera. Also, I was able to view a WVC54GCA camera with the same configuration. Any ideas?

  I can get both of these cameras no problem... just not able to connect but the login box comes right to the top as soon as I hit him enter after you put the URL...

• I have a problem with access to the C drive.

  Original title: lost access to the C: drive...

  When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

  Please, please help!

  Hello

  Method 1:

  You can enable integrated admin and restore the system.

  Step 1:

  To activate the built-in Administrator account, follow these steps:

  a.Click theStart button, then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  net user administrator , c.Type and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Step 2:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2:

  If the problem persists, perform a repair installation (upgrade on the spot).

  Check out the following link to do the same thing:
  http://support.Microsoft.com/kb/2255099

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  It will be useful.

• problem with access to the records of oracle on windows 7?

  I use windows 7 and after that I installed oracle 11g in my PC, I created a database (DBCA). After that I tried to open my file (SPFILE) server named SPFILEORCL settings. ORA
  located in oracle\product\11.1.0\db_1\database... But when I try to open the file it gives me a prompt window ("access denied"), and the only way I could open it is thanks to my administrator account.
  
  My question: it means that it is better to do my job and coding on oracle through the administrator account? or it's always better to use my limited user account, although it does not access to all records of oracle? What is the Advisor for a better future use of the product?
  
  Note: I use 64-bit oracle 11g release 1 on Windows 7 ultimate 64 bit
  
  
  Published by: user12238193 on December 6, 2009 01:39

  user12238193,

  The spfile is a binary file - edit the file with Notepad/Wordpad or another text editor will corrupt the file. Use the ALTER SYSTEM command to change the values in the spfile. If you want to use a text editor, create a the spfile init.ora, open the file init.ora (in the database folder), change the file init.ora with a text editor, close the database, rename the spfile, the startup of the database. You can then create a new spfile from pfile (init.ora).

  The following command will create a the current spfile init.ora:
  CREATE PFILE FROM SPFILE;

  Once Oracle is installed, you should be able to use your limited account. The instance of database (Windows service) must default to run with permissions of the SYSTEM account, so you will always be able to modify the spfile with ALTER SYSTEM command when logged in with your limited account.

  UAC (User Access Control) in Windows 7 seems to work a little better than the same functionality in Windows Vista, and if this feature is enabled, even an account to the local administrator group does not work with permissions of administrator permanently. This means that you will not use the limited account to prevent the unexpected drive - by spyware infections.

  Charles Hooper
  Co-author of "Expert Oracle practices: Oracle Database Administration of the Oak Table.
  http://hoopercharles.WordPress.com/
  IT Manager/Oracle DBA
  K & M-making Machine, Inc.

• I can't open Windows Update in safe mode with access to the internet by trying to resolve an update Error 80070020 on Windows Vista... Can anyone help?

  I followed the instructions for Error 80070020 to start Windows in safe mode with internet access, but Windows Update does not open when you click on it in the box start the search.  Internet access is available and I can connect with other sites.  However, it starts when Windows is in normal mode, but that does not help me solve my problem

  To decode 0 80070522 x. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of the East of 20, the number, the Windows error.
   
  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 20 Menu display - decimal. It will say 32.
   
  Start an command prompt (Start - All Programs - Accessories - command prompt) and type
   
  net helpmsg 32
   
  and it will say
   
  The process cannot access the file because it is being used by another process.
   
  Use Notepad to search for FATAL and 80070020 in C:\Windows\Windowsupdate.log.

• I have a problem with access to the computer after forgetting the password.

  Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash

  My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?

  [Moved from comments]

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• problem with access to the image data after you have installed latest windows

  Hi, my name s mayur, I got the problem when I open my photos data, actuly I have a computer laptop sony vaio there and I m a photographer so usually I saved my data in my vista drive was slove, so I upgraded mwan Formate c drive and install windows 7 in there then when I cheack my image data in f drive I cant able to see the thuumbs when I open it in the windows image viewer He told me i dnt have the permission to access

  I did this solutions

  I changed my user to administrator - has not worked
  I changed the security settings and gives full control to user - does not work
  I've changed owner ship - does not work, I reinstalled vista - not worked
  I used hodden administrator - has not worked
  I have attached the HDD in the pc of windows genuen - has not worked
  I opened my hard drive under linux and not worked

  I am a hardware engineer also so can someone tell me what will be the reson when I cheak the propertese folder there are a few user (s16561613) with red qustion mark in the authenticated user, my laptop has a genuien windows and now I have installed the windows is not genuine and I dnt have the original windows. so is this problem related to the license... or is the problem of pricing to someone please help me... the security and

  Hello

  There will not be any support for a pirated copy of Windows. I suggest you install a genuine Windows 7 on the computer and test the issue. If you face the same problem let us know so that we can help you further.

  Reference:

  Windows Genuine

  http://Windows.Microsoft.com/en-us/Windows/genuine

• Problems with access to the internet - suspected hardware conflict (IP address)?

  Hello

  I wonder if you could help out me?

  I have problems with internet access on a wireless router with what appears to be a conflict between three different pieces of equipment.

  I have a laptop running Windows 7 & an Ipod Touch which access entered it internet without any problem on a Belkin 54 g wireless router.

  Everytime I turn on my Windows Vista desktop PC, both devices 'hang up' (not the o/s of just no internet access) desktop PC seems to have access to internet at the outset and then access toggle on and outside.

  I then shut down the PC and reset before internet access wireless router is available on the portable computer and the IPOD Touch. I find it very frustrating, because I want that all three devices to be able to access the internet at the same time.

  An error message came up initially on the laptop, marking an IP address conflict. I paid for for a guru PC "told" to come take a look at this - he made some changes to the IP address of the desktop computer, then it wouldn't be anywhere near the addresses of the other 2 devices, but this seems not to have solved the problem.

  Can you please specify? Any help would be welcome!

  Thank you very much

  Rob Fleetwood.

  Hello

  Method 1:

  I suggest you follow the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you follow the link and check.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 3:

  I suggest you follow the link and check.

  Get help with the message "There is an IP address conflict"

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-there-is-an-IP-address-conflict-message

• Problems with access to the blackBerry Smartphone Internet and e-mail?

  Hey everybody

  I just got my curve 8900 yesterday t-mobile, and I wondered why I couldn't access the internet and why I couldn't use my messages. Whenever I would try to resemble something upwards using the internet from my blackberry it woud still say something about the subscription. In addition, for messages there it would not allow me to send stuff only save drafts for her, that's why I used the SMS and MMS text to work around my messages. So PLEASE someone please help me understand this problem!

  Well, it's basically what I said earlier.

  The part of your contract with your operator voice covers some elements:

  • Voice
  • Voicemail
  • SMS/MMS
  • (I'm not sure - T-Mobile can give you the full list)

  The data item for your contract covers other elements:

  • Internet browser
  • E-mail
  • Applications that require internet access
  • (I know - T-Mobile can give you the full list)

  You will only receive what you contract for services. So, if you don't have a data contract with T-Mobile, you won't get these services.

  Contact T-Mobile and find out what your policy covers. If it covers the services to which you do not have access, it must be changed (since you're already paying for it). If it does not cover data and that you want these services, then you must add to your contract (for the $$$ they will charge).

• Set up a user account with access to the Internet only

  Original title: the user account settings

  Anyone know how to configure a user account so that it can use the internet and nothing else. Any help would be appreciated muchly.

  Hi Duane,

  I suggest you to go through these links to apply restrictions to a user account with parental control settings.

  Set up Parental controls

  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls

  Parental control

  http://Windows.Microsoft.com/en-us/Windows7/products/features/parental-controls

  Hope this information is useful.

• Urgent need help with access to the scene.

  I want to access the video clips that are nested inside of each other and I want to access the main theater of my project when it was created, but I can't do that with Actionscript 3. How do I access the root of my project?

  You can reference the root or the main timeline to use anywhere:

  MovieClip (root)