Anyway to use Lightbox video output in a Flash-based site?

Similar Questions

• Using s-video output on my Satellite L300D-13Y

  Hello

  I plugged the laptop with my TV using an s-video cable (4metres) and a s - vhs to SCART adapter.
  I chose the s - vhs input on the tv but when I choose "extend the desktop to this monitor", I get the confirmation message 'you want to keep this setting', but the check box is cleared automatically. the tv does not show anything.

  in Selector screen, he got two options

  1 pnp monitor (standard) with ATI mobility radeon HD3650 graphics card
  2 non-pnp-monitor (standard) with ATI mobility radeon HD3650 graphics card

  I got windows vista.
  Sorry for bad translation my OS is in German.

  Other questions:

  What are the options I have to get a s-video and HDMI on my machine, I only got s-video and output VGA.

  Thank you very much

  Hello

  If you connect the laptop to the TV using the s-video cable then you must choose the TV icon (and external monitor not) using the FN + F5 key combination.

  > What are the options that I have to get a s-video in and HDMI out on my machine, I only got s-video and output VGA.

  This is not possible, you can not convert the analog signal into digital signal (s-video = similar; HDMi = digital) is not possible.
  You can convert digital in analog but not digital/analog.

  You can try to use a VGA to HDMI. Google for it!

• Flash Player plays that VIDEO when uninstalled!  Flash utility site times features when it is installed!

  On:

  Mac OS X 10.9

  2011 27 "iMac 16 GB of Ram

  Safari

  Firefox

  Crazy as it sounds, in addition to all of the sites I tried, it seems that Flash video content will play only when I have ONEinstall Flash Player.  But then, any other Flash content, such as Internet speed Test utility or the content like that, won't work.  When I install the Flash player updated once again, the opposite situation with the videos DO not play, (static area 'black screen' that does nothing, but I can with the right button to 'Preferences of Flash') while the 'other' content Flash works.

  I've had problems with Flash for many months now, while I've upgraded to OS X Mavericks, but I identified only recently that this crazy situation exists where content video only works when I have oneinstall Flash.  Curiously, there are a limited number of Flash videos that work independently, but most don't.  Even Adobe own video tutorials that I guess are integrated properly, behaves to the weird way to work only when Flash is uninstalled.

  I appreciate all the help, and I understand if it's too weird to think.

  Videos that work probably are HTML5 that requires no plugin.

  Search Spotlight "Flash Player.plugin" and trash EVERYTHING in the results.

  Go to: [user] / Library/Preferences (hold the "Option" key when you click on 'Go' in the Finder to access this folder menu)

  Trash the com.macromedia.Flash Player.app.plist file.
  Trash folder Macromedia of there also (the folder INTEGER).

  Go to: Mac HD/Library/Application Support/Adobe

  Trash the Flash Player folder and the folder Manager Installer of Flash Player .

  Go to: Mac HD/Library/Internet Plugins.

  Recycle Bin, the files flashplayer.xpt .

  Empty the trash.

  Download Offline Installer: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac install_flash_player_11_osx.dmg and run it.

  If after all that, it still does not, you will have to watch you have other plugins that may cause a conflict.

  I have Safari, Firefox, Opera and Chrome, as well as a few "off brand" browsers and Flash Player works in each of them. End of 2012 Mini, Core15, 16 GB of RAM.

• Video output for PXI embedded real-time?

  I plan to buy a controller PXI real-time Embedded for security monitoring.

  Is it possible to use the video output of a controller PXI running RTOS to display a LabVIEW RT application messages? According to the literature, it seems that the use of the video output is more possible for Controllers PXI running Windows XP.

  Is there a specific application with LabVIEW RT?

  Thanx.

  H.L.

  Well, it works using the IMAQ RT video Out VI: images are displayed properly via the video output of the RTOS PXI controller running.

  Thanx.

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• My dv9700 use for video when the graphics card is disabled?

  Hello!

  I've had my dv9700 for about four or five years now. A few months back I started getting blue screens with an error code of nvidia. Turned my video card went out due to overheating, so I sent it have fixed output card (reflow). It lasted me until now, but the card is finally out again. I would try to start each time, I would get the error screen and blue nvidia even code (again, it is a hardware problem is not a problem of driver/software). However, I was always able to access safe mode, then I disabled my NVIDIA GeForce 8600 M GS display adapter through the Device Manager and now I can start normally.

  So my main question is, what is my laptop using for video now that the graphics card is disabled? I noticed something called 'vgasave', but I don't know if that is related. Also, someone said that my processor could limit the video feature (?).

  Second, what is the extent to which I can use this new video? I noticed that some programs do not run. In particular, I can no longer connect to my TV via HDMI. Is there a way to get around this?

  Sorry for the long post and thank you in advance!

  Axel

  AxelFen wrote:

  My laptop has the Northbridge: Intel PM965. Do you know of anyway to increase this functionality (IE allow a HDMI connection)? I know that at this stage I should just get a new computer, but it would be nice to be able to resign from the attached web enabled TV. Maybe I could use the external monitor (VGA) port, since it is analog rather than digital?

  Thank you very much for your help!

  The pleasure is mine!

  You're stuck with the video produced by the MCP67N. You can replace the video module. They should be available for a decent price on eBay. VGA is analog. You will find a disappointment.

• Satellite P100-102 without digital-video output TFT-connection-Port?

  Hello

  We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

  On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

  Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

  Best regards
  Sascha

  Hello

  Sorry, but I disagree with you.
  Toshiba designs laptops that support the digital port (D-video output port)
  Check for example the Qosmio of E, F, G series.

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Satellite 1800-100: video output does not work

  Jen
  I just installed windows XP on my old Satellite 1800-100, but now my video output no longer works. So I just downloaded the latest version of the driver, but there is no way I can get it installed. According to Windows the new driver is more recent, so it won't let me update. And when I try to uninstall the display driver, I have to restart for the taking of effect and wile it restart automatically installs the standard driver again.

  Can someone help me?
  Welcome,
  Daan

  Hello

  You say TV out port, or monitor the port? As far as I know, this unit is pre-installed with Windows XP Home edition at home and all the drivers can also be used for WXP Pro.

  You preinstall your own OS (no recovery image)?

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• Can I connect a CCTV to the s-video output?

  I have a sp20 with s-video and need some images of my microscope at Uni, but when I plug in any device is detected, do I need an external card or can I set up a card for the slots? Or the graphics card from the computer should read the s-video cable (the cctv said Iris, on which I connect to my s-video output?
  My career would appreciate any help

  Hi Mark,

  Sorry if I misunderstood your request, but I think that the S-video port on your laptop is out only that you will be unable to get a signal to your laptop using the S-video connection.

• Satellite A300 - possible port VGA - not problem of video output

  I use my VGA port in two main locations, at home to connect on an old television set via a PC/TV converter and work to connect directly to a projector.

  This week he suddenly stopped working on both at the same time. I tired to another laptop in the projector to work and it works great. I also tried different tracks. The problem is certainly my laptop (which is now almost 4 years).

  The most likely thing seems to be what is ' t the plug itself. If I plug something inside Windows (7 Ultimate) is work that is an additional monitor, but the projector/TV no signal. I've tried all the obvious things, hit F5 makes no difference, and the Windows settings have not changed. The resolution and refresh rates are properly defined. I try to avoid the standard answers on the verification of all the things that I already checked!

  Now I have a HDMI port on the side, the probability is that just buying a VGA/HDMI adapter and using this port will solve the problem? I guess if it's just a physical problem with the VGA port so it will, but the problem would be a graph problem or your motherboard, and if it is will this affect the HDMI port, but also the VGA port?

  Port VGA is an analog video output. HDMI is a digital output.
  Two are different and not related them to each other.

  So I don't very well if a HDMI adapter-> / m VGA would work properly.
  Maybe it works but only with a lower resolution. So in my opinion, FullHD is not possible. However, I think that you will need to test it with your laptop.

  Usually, you can use an adapter like HDMI to DVI or DVI to HDMI smoothly.

  With regard to the question of VGA output.

  Well, usually the Fn + F5 should pass between the internal and external production. It should work with VGA and HDMI port. Maybe it's just a software related issue.
  In your case, I will try to uninstall and update the display driver. Maybe it helps.