AOM lost disk upgrade test

Similar Questions

• "Disk hard test" failed

  My laptop was not starting and then to a system diagnostics page, advising me to do a hard drive Test. I did, and then he led me to a screen saying:

  "Disk hard Test" failed

  "Hard drive 1 SMART" (301)

  "Hard drive 1 QUICK" (303)

  'Hard drive 1 FULL' (305)

  Diagnostics of the system... and then it just says: tests of f1 - f4.

  What would the next step from here? I'll try some of the different tests.

  Thank you, Leah.

  Hi Lea,.

  All error codes (301 is a Smart failure with 303 & 305 respectively being the short & Long drive Self Test failed) would indicate that hard is defective and must be replaced.  This is also consistent with the question of commissioning.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, please let me know - include the full model number and the laptop Nr - see here for an explanation.

  Kind regards

  DP - K

• lost disk one, can I get a new one or download.

  lost disk one, can I get a new one or download. All other disks and keys to quiality.

  If you have lost a disk for a product not manufactured by Microsoft - contact the manufacturer of the software for a replacement.

  If you have lost a disk from Microsoft:

  How to replace Microsoft software:

  http://support.Microsoft.com/default.aspx/KB/326246

• Free HP Win7 upgrade, lost disk and product key, do wat?

  I would like to install the Win7 64 bit I got from HP through its free update of the vista program in 2009 on a new SSD for HP. However, I realized that since my computer came with vista, the product key vista stuck on the side of my computer probably isn't the right pair to install Win7 64-bit.

  Is it possible for me to get the product key for Win7 64 bit HP? Thank you.

  If you have lost the disk key and/or product... There is nothing that HP can do for you. The upgrade was administered by a third party, and it is likely that HP does not have this information.

  If you have an active Windows 7 installation of this drive and key, you will be able to recover the key using a utility that can be found on the internet. Apart from that, really look hard for the disk and key.

  Frank

• Lost Vista install disk - upgrade to WIN 7 - Help!

  Well, my problem is that I have an old PC that comes with windows XP Pro. About 2 years ago, I bought Vista Home from Best Buy.
  A few days ago I have upgraded to a trial version of Windows 7 Ultimate and I like 25 days to activate it, which I don't want to because I lost the characteristics that I had, I seem to have some compatibility issues, etc...
  HOW to return to my Vista?
  I DO NOT HAVE my disk of Vista that I bought at Best Buy.
  My version of Vista is registered with Microsoft and I have my Original Product ID and product key.
  It would seem that Microsoft would be able to easily provide me with a replacement CD I'm paying to have delivered to me or give me a link to loadable.
  How should I proceed? Microsoft will do for me?

  Thank you much for all support information.

  There is no Vista free download legal available.

  Borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Upgrade test lab to U4 - lost access to the premises of SATA storage

  Wonder if anyone has seen this when upgrading ESX of U3 to U4.  My laboratory ESX servers are based on the motherboards desktop, the ASUS P5E-VMDO (processors quad core, 8 GB RAM).  All the way up to and including the 3 update, installing ESX recognized the SATA controllers on board and I was able to use the local VMFS partitions.  In fact, this is where I had installed my Lefthand Networks VSA SRM test and demo-ing.  The upgrade to U4 has apparently updated drivers SATA for ESX and server does not see the SATA controllers on board.  The laboratory is still quite functional due to the Openfiler SAN I, but I can choose to downgrade to U3 ESX hosts, unless I can find a solution, so I can always access the local storage.

  Anyone got tips?

  Assuming that you do not use a RAID function on board with your SATA, see if your system BIOS has an option to portray the ICH9 controller as something else - achi if it is avaiable or portray SATA in IDE, if it's available and see if ESX 3.5 Update 4 it resumes after a reboot. You'll want to write to its original position first before making changes if you can put if none of this works.

  Datto

• All-in-one Officejet 5610: function Scan lost after upgrade to Yosemite

  Lost the ability to analyze after upgrade, print, and copy works. Have already done everything suggested by Double-U-di in the Mac OS 10.10 post Yosemite and HP Printer Support posted on 30/10/2014: checking for updates Apple, printer removed from the queue, add printer back, reset the printing system, removed the HP software, repair disk permissions * manually installed HP printer drivers v3.0 and added to the queue printer. No change, printing & copying ok, but the scanner does not.

  During approval of the repair disk found a number of problems related to printing and presumably repaired, had more to do with the ' should be 80, group is zero ", but others as well.

  Anyone know what I can do, short of buying a new printer? I realize, it's a dinosaur - always attached via the USB port, but she worked just beautifully before the upgrade.

  Hello @DrBucky,

  Welcome to the Forums of HP Support!

  I understand that you are not able to scan from your HP Officejet 5610 all-in-One Printer to your computer Mac OS X 10.10. I would like to help you to solve this problem today. Thank you for all the troubleshooting steps you tried before reaching out for support. You have completed almost all of the recommended steps. However, the order in which the steps have been completed can cause some problems. Therefore, I will be having repeat you some of these measures to ensure that the appropriate driver is being used.

  Step 1: Reset the printing system and uninstalling the driver:

  It is crucial for the repairs we have a clean slate to work with. Therefore, I'll take you reset the printing system and Uninstall the drivers for your HP Officejet. Please click here for instructions on how to perform the reset and uninstall. Once the site opens, select the drop-down list for 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9'. Then, please follow the steps in the method 1 and method 2.

  Once steps have been taken, please proceed to the next step.

  Step 2: Check and repair your Mac disk permissions:

  It is very important to perform the audit before the repair. By running the check first, questions are found. Once all questions are found the repair process will correct these problems. By repairing just without checking first, questions may be missed.

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Step 3: Manually install the driver Package:

  Please click here to manually download the package from Apple to HP v3.0 printer driversupdate. Once the site opens click on the download button at the top. Follow the instructions on the screen to install the driver package.

  Step 4: Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Step 5: Add the device:
  

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list.

  -Source

  Once your printer is properly added to, please try to scan the image. For instructions on the three supported methods of scanning without HP software please click here. The support document indicates that it is for Mac OS X 10.8 but the steps are the same for Mac OS X 10.10.

  Please let me know if a retry of the procedure described in this new order solves your problem of scan. Good luck!

• Virus ruined Win7, no disk upgrade is?

  Hello world.

  I have a laptop, G70 - 467 CL.  It came with Vista, with the promise that when Windows 7 is out I could upgrade for free.  I did as soon as I could.

  Here, 3 years later, I catch a virus that started my impossible machine.  I took the HD, copied my important files on a backup HD and started from scratch.  Only problem is, I can't find the upgrade disc ANYWHERE.

  Any help you can give me would be greatly appreciated, because I am in the 3rd week of a school semester new and I can't do without my laptop.  (That and I forgot how sucked much of Vista AND Win 7 to purchase seems silly since I already...)

  Anyway, I don't remember if sent HP upgrade disks or if you need to download Windows 7 or what the deal was, because it's been awhile.  If they sent discs, I can't find mine anywhere.  And the HP website is a mess when it comes to order recovery disks.  (On Windows 7, Vista no.  I did those, they worked...)  AND I must pay if I even want to talk to a real person...

  My apologies for my tone.  This whole ordeal is * really * bothers me...

  Thank you in advance and I appreciate really help everyone.

  Good evening.

  Brian

  To the best of my knowledge, the Windows 7 upgrade disks once lost, cannot be pronounced again. (Microsft restriction I guess, because of the long period since the program was launched). This is why I think that the only option is to have a retail version of Windows 7 and install it to your laptop.

• lost disk refortmat

  I lost my disc to reformat. is it possible to download one?

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Computer HP laptop disk hard test failure

  My HP Pavilion dv7 is not started Windows and I couldn't start in the start menu. I used menu F2 and not had a test drive. But there is no short DST. 0W7UWM-5B570Q-XD003A-60UP03 I. Product ID XZ031UA #ABA

  Does that mean I need a new HD? If so, what is good for my computer and how do I get windows 7 back? I still have to buy it?

  My laptop is 2 years old.

  You'll be fine with that which is recommended to David or that I've recommended. Between my post and sound, you have all the information you might need. He gave you links to download a Windows installation disc or order a HP recovery disk. Read and digest it all and after back if you still have questions.

  And we can help you find the version of Office Starter. It's free to use with Windows 7. Here is a link to download:

  Office Starter

• How to recover messages lost after upgrade to El Capitan

  After the upgrade to El Capitan! 0.11.3 much mail in Apple Mail has been lost. How can it be recovered?

  Your Time Machine backup. Mail (Yosemite): restoration of the mailboxes and their content in

• Lost after upgrade to Windows 7 HARD drive protection

  Hello

  After the upgrade to Windows 7 from Vista, I lost HDD protection and integrity monitor.
  Any help would be appreciated.

  Hello

  Visit the Toshiba download page and download these two tools for Vista and install it on your laptop Win7 preinstalled.

  I did the same thing on my Satellite A500 and everything works fine.

• Satellite M70 - 122 disk upgrade

  Dear all

  I want to upgrade the standard 60 GB HDD of my M70-122. I found some interesting patterns that dissipate even less power than the Toshiba. Can someone tell me if my laptop can take 120 or 160 GB hard drives? Has anyone completed this upgrade so far? Thank you

  Hello

  I put t know where swordbreaker found this information, but you should be careful with these large hard drives. Sometimes the BIOS don't support these large HARD drive sizes and thus the HARD drive might be not recognized by the BIOS.
  Test if the HDD before you buy!

  Good luck

• Audio lost after upgrade to Vista on a Satellite Pro A120 PSAC1E

  Hello

  I just upgraded to vista and I lost my audio. I tried all the latest orders, still no luck. The pc says the driver is installed and the device works correctly, but I can't hear anything. Volume is 100% also.

  Any ideas?

  Well, first of all how someone should provide advice, if you n t write anything on the name cell phone you! ???
  Then please provide more details on your laptop!

  I noticed the same problem on the satellite U200. After upgrading from XP to Vista there is no sound, but the audio driver has been correctly installed and audio chipset has also been recognized correctly.

  After a long investigation, I found a solution here in the forum.
  First, it was important to increase the volume to the maximum with XP installed. Together sound controls must also be set to max.
  Be sure to use the RIGHT driver sound after the new installation of Vista.
  Not all drivers are working!

• Lost disk space

  Hello

  I have a Macbook pro retina mid-2012 (10.1) with 16 GB of ram.

  I use mac OS X El Capitan 10.11.3

  I'm trying to set up a bootcamp partition. The problem is that the said finder I have 133 GB available, but the bootcamp assistant and disk utility I have only 56 Gb of available. I tried to do the procedure Sos in disk utility in recovery mode, it says that everything is ok and I do not get my space. Disk utility says that all of the lost space is used for 'movies '. But I have all the movies. And the viewfinder says I Go 133 left. Onyx even says I only 56 GB left. What Miss me?

  Thanks for your help.

  The problem, I suppose, is that Boot Camp requires contiguous space. Your drive is a little fragmented for Boot Camp could find only 56 GBs of contiguous space in your space. There is that a single fix for it - repartitioning the drive. Unfortunately, this operation also erases everything on the disc.

  Paragon Technologies is a software called CampTuneX utility that allows to resize Boot Camp partitions without the need to erase the disc. It costs about $20. You could try to create the 56 GB partition that allows to Boot Camp, then buy CampTuneX and see if it will extend to you. The alternative is to back up everything, use disk utility to repartition the disk, then restore your backup. This will defragment the drive then the empty space are all contiguous. It costs nothing if you have a drive for backup, but it will take time.