APC, "access denied" for the General Ledger of Domino.

Similar Questions

• I receive error Code: 0 x 80070005 (access denied) for the KB2698365 & KB2719985 updates

  The environment is Windows XP SP3

  -Windows Update fails for these 2 updates

  -Fixit research and 'fixed' a problem to update storage location.

  -Windows Update still does not work

  -Download the update on Microsoft.com

  -Manual installation fails with 'Access denied' during installation.

  Runnng Bit Defender but it too fails when you try to automatically install these 2 updates.

  Yes, I am the administrator and the only user on the machine.

  Thoughts?  Help?

  THX!

  Hello

  1. what ran fixit?

  2. what version of Windows XP are you using (whether x32bit or x64bit)?

  3. you have made no changes to the computer before the broadcast took place?

  Follow the steps:

  Method 1:

   

  Follow the article:

  http://support.Microsoft.com/kb/968003

  Method 2: To run only the fixit for Windows update reset component

  http://support.Microsoft.com/kb/KB971058

  Restart the computer and the monitor upgrade of windows, if you get the same error then perform method 3.

  Method 3:  Run the Windows update agent and check.

  http://support.Microsoft.com/kb/943144

  a. click on the link above and download the appropriate version of Windows Agent and run it.

  b. restart the computer and control it upgrade of Windows.

  c. If the problem remains same run the run the Register the Wups2.dll file attach it in the above link and check for the issue.

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://support.Microsoft.com/kb/322756

  Hope the above information is helpful.

• Access denied for the files that I am recovering from a backup

  A lot of my music files were accidentally deleted, but they are still in my computer under protection of owner but the computer indicates that access is denied. I also get a message that .net Framework is not installed, even if I install.  I tried to figure this on my own, but I can't, so I hope someone here can help me out.

  Thank you!

  Hello

  ·        When it asks for the installation of .NET framework?

  ·        Where did you install the .net framework and how, thanks to Windows updates?

  There are many .net framework available updates that must be installed on the system.

  ·        What version of the .net framework is installed on the system and what is the version prompting to be installed on the system?

  I suggest you to check in the patches installed on the system if the .net framework is installed on the system or not.

  See whichWindows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Install updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  If you have deleted the files on the system, I suggest you follow the steps mentioned in the article below.

  Recover lost or deleted files

  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-lost-or-deleted-files

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• "Access denied" for the administrator

  I have only my account (like my name and "Computer administrator") and the comments "the guest account is disabled. Even with that, I get "Access denied" when I try to delete the "System Volume Information" (has two verses in the archive according to my antivirus software). What is the next step to the top of "Computer administrator" who will make me even better access. I really want to be the boss of this thing, not the tail which is moved.

  System Volume Information is a protected operating system file, and users cannot remove it.  It can contain files created by System Restore .  To remove content System Volume Information , turn off System Restore , then turn on again. That will delete all restore points, then create a new one.

  Note that infections in System Volume Information cannot become active and cause damage to the system unless you intentionally run the system restore and restore the system to a date and hour earlier.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• access denied to the local disc (c :))

  access denied to the local disc (c :))

  Read the article below and post back with all the relevant information. Thank you.

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  Windows Update forum is one of the three forums that doesn't have different forums for different versions of Windows (Internet Explorer and the game are the others).  With this in mind, we ask that you postat LEAST the following information.  If you don't know how to find some of the information and then post what you can and let us know that you need help to find information.

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.

  If the question is never happened before with other updates.

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think. Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I get an error, access denied to the C:\Users\myuser\AppData\Local\Temp

  Original title: access denied to the C:\Users\myuser\AppData\Local\Temp

  Hello

  I have a problem with the Windows 7 C:\Users\myuser\AppData\Local\Temp temp folder. Sort randomly, I lose access to this folder, in the sense that if I open a cmd terminal and I try to cd to that folder, it gives an access denied error (at least that I start cmd as administrator). I noticed in the list of permissions on this folder does not appear the SYSTEM. I read somewhere that this is the problem, so I added back, and then it worked. Unfortunately it disappears every day the list of permissions, and I have to put in place every day which is annoying. Do you know what could cause this problem? How can I see which changes these permissions?
  Thank you
  Razvan

  Hi Razvan,

  Thanks for posting your query in Microsoft Community

  According the information you have provided, I understand that you found error access denied when using certain commands to the command prompt. I will certainly help you in this matter.

  1. have you logged as administrator?

  2. do you have an antivirus software installed?

  Some commands that you run at a command prompt, you need the administrative privileges for the good functioning of Windows.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Error code O9XNZMXB - access denied for briefing

  I gave access to information books to a user through the manage privileges. However, this user always gets the error:
  O9XNZMXB - access is denied for the user/users/ABC/_briefingbook path
  
  Can anyone help? We created groups with the same name as the user ID.
  
  Peppy

  So, you got your answer?

  If not then to delete the user ABC Catalog Manager Help and ask the user to sign in again as it will create a new folder with default privileges or click this user and then set permissions recursively for its ID

• access denied for user access to/users/weblogic/_portal/dashboard of path

  Hello world
  
  I installed 11.1.1.6 OBIEE. Until yesterday, everything worked well. But today, I made a new RPD and restarted BI services.
  
  Then after that when I open MonTableauDeBord it is throwing the following error
  
  "access denied for user/users/weblogic/_portal/dashboard path available.
  
  One faced this question earlier? Please give me some suggestions to overcome this problem.
  
  Thanks in advance.

  If possible, remove the weblogic and weblogic.atr folder and restart the BI services

  Either using Catalog Manager, change the permissions

  Published by: svee on July 31, 2012 11:28

• Access denied for user path in 11g

  Hello
  
  I deleted and recreate a user, when I login and goto my dashboard it shows error below.
  
  access denied for user access to/users/kavitha/_portal/dashboard of path.
  Error codes: O9XNZMXB
  
  Thank you
  Kouadio.

  Kouadio,
  Find the sub folder

  That is to say, drive installed: \Oracle\Middleware\instances\instance2\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\YourCatalog\root\users

  1 delete the problemcs folder and of
  2. restart the BI services
  3. sign in with the user.

  Thank you
  Oldia...

• access denied to the combustion process

  When I try to burn a disc double layer the trial started, no problem found, project size 7.9 G.

  Then, during the sorting process begins: "building navigation, strengthen the system of files (sorting) and a pop lights saying"access denied"and the process hangs there.» During the editing process, I made to halfway through a test to a 4.7 G disk, and that went well spent, I burned a 4.7 G disc with some of the material.

  Anyone has any suggestions that it may be. Thanks for the reply.

  Chris

  Begin again by a right click and choose 'run as administrator '. Try again. This version fixes a number of problems.

• Access denied for user access path...

  I created the new filter by copying an existing and making some changes. I created this as an Admin user. However, when connect as a tester, I get the error "access denied for user to the path... /.. '. /.. "/ New filter.
  
  I think I might have to grant the privilege to this user to the filter. But I am not able to know how I can do.
  
  Help, please.
  
  Thank you.

  give access to shared folders were the filter is stored in the user, because the common filters were stored there only.

  Thank you
  Vino

• What is my access code for the software updates

  What is my access code for the software updates?  It seems to be a six-digit numeric code, but I have no recollection of anyone establishing.

  Take a look at this thread, what is the password for software update

• Download videos from Sony Handycam; error: do not import because you don't have access privileges for the file to import

  Original title: Downloadinf videos from Sony Handycam

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  I have sony handycam HDR-XR550V.   When I tried to down load my videos and pictures of the handycak for PC Windows 7 I get the following message appears after download some of the pictures "may not matter because you don't have access privileges for the folder to import to. well.»  Help, please

  It is probably a permissions problem.

  Appropriating a file or a folder
  Add 'Ownership' in the context Menu for files, folders, and drives

• EBS Templates-Modify outline of design for the "General Conditions"?

  Hello Oracle:

  I work with EBS - IN. contracts.  My current challenge is to reformat the models of XSLFO printing contracts. I have 90% complete.  2 following questions will get the finish line.  These must include with model of XSLFO code changes.  This is part of the EBS.  NO editor of BI was available to work with - so I work with the live code XSLFO.

  (# 1) where can I change STYLE of OUTLINE for the "General Conditions", I'm working on a copy of the model terms of contract Oracle-> 'OKCTERMS_en. XSL".

  • Currently expose style = 1.  (a) (1) (see below)
  • Desired contour style = 1.    1.1 1.1.1

  

  Here is my best guess where this change must be made.  Please notify.

  

  (# 2) If I had to incorporate attachments so they printed in PDF-direction within the current model.  Any ideas how to maximize part Oracle to make impression attachment in the PDF?

  Open to all ideas.

  Thank you all!

  TreeStrepek

  The answer is to configure the outline style when CONTRACTS are set up.  It is a frontal process.  This isn't a change in XSL - FO.

  Look at this link

  https://docs.Oracle.com/CD/E18727_01/doc.121/e14436/T392333T392339.htm#T392410

  

  

• ORA-20001: unauthorized access (package for the undefined security group variable).

  I'm creating an application that uses the authentication of the APEX and characteristics (work) registration and forgot password forms (does not work).
  
  My I forgot the password is public (requires authentication). The user provides the user name and a secret answer, which are validated and then provides the new password. I try to use htmldb_util.reset_pw to reset the password of the user, but it does not work.
  
  I have a process on the new password page call a PL/SQL anonymous block that looks like this (see below), where username = P16_ITEM1 and P18_ITEM1 = new password.
  
  BEGIN
  apex_040000.htmldb_util.reset_pw (V ('P16_ITEM1'), V ('P18_ITEM1'));
  END;
  
  I don't know how to send a message of success/failure of such PL/SQL block to the APEX, but that's a separate issue, I guess.
  
  In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:
  
  ORA-20001: unauthorized access (package for the undefined security group variable).
  ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 22
  ORA-06512: at "APEX_040000.WWV_FLOW_FND_USER_API", line 1220
  ORA-06512: at "APEX_040000.HTMLDB_UTIL", line 1253
  ORA-06512: at line 8 level
  
  I've searched previous discussions and tried different suggestions with no luck.
  
  I'm on Oracle DB 11g XE and APEX 4.x.
  
  Any help will be appreciated. Thank you
  
  Alex.

  In any case, during the trial through SQL Developer as the user with APEX_ADMINISTRATOR_ROLE, I get the following error:

  ORA-20001: unauthorized access (package for the undefined security group variable).

  When executing code outside the Apex which depends on the security defined Apex group, perform the following steps before your own code:

  wwv_flow_api.set_security_group_id(apex_util.find_security_group_id('YOUR_SCHEMA_NAME'));
  

  Google "wwv_flow_api.set_security_group_id" for more details, like this blog:

  http://www.easyapex.com/index.php?p=502

  -Morten

  http://ORA-00001.blogspot.com