Connection WI - FI keeps breaking with the Satellite Z930

Similar Questions

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  At my place of work, there are a data server with LAN and internet networking. I want to disable the internet connection before it is infected with the virus.

  original title: server and virus problem

  Hi SurajMendon,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the platform of networking on TechNet. Please post your question in the TechNet Windows XP Networking forum.

  Networking platform

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• Can't connect to Internet with the Satellite A100-234

  Hello

  I have the Satellite A 100-234 but it doesn t work with internet. I put t know what to do. I formatted the computer two times. It's Windows XP by the way and I have LAN DSL connections so I need your help. Pease, what can I do with it?

  I have another computer. It's by Satellite A 100 (VISTA), but his work which is average I put t have a problem with my Cannon.
  I hope you can help me guys. Thank you!

  How did you install the OS on this laptop?
  Have you used the Toshiba Recovery CD?

  If you have not used the Toshiba Recovery CD so are you sure that you have installed all the drivers necessary?

  The network adapter has been properly recognized in Device Manager?

  I would appreciate your comments

• Problem starting with the Satellite A500-134

  Hi guys

  My laptop is a few years and two months back, the battery has just stopped charging (death), but because of the work schedule, I didn't get time to replace.

  In any case, I was working on a report and took a 20-minute break and when I came back the laptop was turned off by itself and that a single led white light for the AC adapter was.

  When I pressed the power button the camera and light led light power which ends of the AC adapter / light turned on and at the end a dry stop the laptop with the power and the orange light battery light on. Orange light battery led was off after 6-8 sec.

  I tried again and again and the same thing is happening

  Can someone please tell me what is the problem that I really need to finish this report and I am lost.

  Thank you in advance for all your backup stream.

  Try resetting your laptop. Unplug the power plug, remove the battery and press the power button for 20 seconds. After leaving it for a while, only connect the power supply and try to start your laptop.

  What happens when you do this?

• A few questions on its use with the Satellite 4030CDT

  I'm not very computer saavy. We have an old satellite 4030cdt. My son wants to use it to access the internet. What should I get to this point? We have the possibility to connect to internet wireless in the House with another laptop. In addition, the screen is not complete on the laptop. How do we get an extension on the screen. We tried to do it via the control panel and settings but us will not change it.

  Hello

  Maybe you should first check all the components in the Device Manager and make sure the drivers are installed. It will be interesting to know what operating system is preinstalled on this old notebook. Please let me know.

  If I remember well that laptop has no LAN card. Am I right about that? If yes then I recommend to buy the PCMCIA LAN card. Install properly and you can connect to your router and enjoy Internet at full speed.

  To be honest, I don't know what you mean with the larger image on the screen. Perhaps you should choose the standard screen resolution lower resolution screen, but on this laptop is 1, 024 x 768 and I think it should be OK.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• Connection Officejet 6100 to Wifi with the Mavericks

  I have Mac OS 10.9.2 (Mavericks) and have installed all available updates.  I just bought a HP Officejet 6100.  The configuration software supplied with the printer does not work on the Mavericks.  I can use the printer via USB, but have no idea how to do to connect the printer to my wifi network.  All the instructions I found point using the diskette supplied with the printer (not compatible with the Mavericks) or assume that I already connected the printer to my network wifi (which is the problem that I am trying to solve).

  I had HP products in the past and if it is connected to the network, but it supports WPS and has a touchscreen user interface.  This printer does not seem to be supported.  The wifi light just keeps blinking.

  I don't like on ePrint, etc..  I want just the printer connected to my wifi so I can print from any number of computers on this network.

  Help, please.

  Thank you

  It wasn't very nice, that we were just trying to help.  Don't tell you specifically that your router has WPS.

  On your printer, press and hold the button wireless for 3 seconds.  Within 2 minutes, press the the router WPS button.

  Wait about 2 minutes. If the printer connect successfully, the wireless light will stop blinking but stays on.

  From there, you can connect your printer on your Mac:

  -Go to System Preferences > print & Scan
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Re: A few questions with the Satellite A350-12J

  My father-in-law's cell phone is the Satellite 350 and I think there 12j after his name.

  We re-installed Vista 32 bit the other day and he said that some things do not work as they should.

  First of all, if he presses the FN key, and say the s, the brightness, it works but he used to have a small dock type thing will appear at the top of the screen with icons of FN button. The other don t FN keys work well as the permutation of switch monitor.

  Second keys soft touch media don t work as turning off the lights behind them or bring up media player.

  We have evidence and tried to install the value pack but he said during the installation that he was withdrawing the package so it must have already been installed. After having re-installed, there is no difference. I can't find any program or whatever it is in the Panel for her.
  Also, I tried the same thing to the hardware configuration. Once again, it seems telling herself it was there and uninstall. Yet once I re-installed but t still can't find anything for him anywhere for me to change any settings or anything like that.

  I don't have the laptop with me good that now it is at home, but I think I got it.

  All ideas welcome.

  Each Toshiba laptop comes with the pre-installed operating system and the old A350 will be delivered with Vista, so I would like to know if it is possible for you to use this original picture of the recovery.
  Have your father in law created recovery DVD such as recommended by Toshiba?

  I guess you are trying to install the version of Vista clean, right?

• Is it possible to connect and reconnect a keyboard with the computer on?

  I have now 2 iMacs Office sitting side by side on my desk.  Since I want a keyboard with a numeric keypad on the right side, I found the only way to get that with an Apple keyboard with a USB connected keyboard.  Therefore, when I want to knit back and forth between macs, I have to unplug the keyboard of one and then plug it in another one - and back.  It would be a hassle to turn off mac whenever I need to do that, so I was wondering if it would damage a computer.  Two usb ports are usb powered external hubs.

  There is no problem with the device on a keyboard with the computer and plug in another.  It's only external drives that need to be removed before unplugging.

  

• Problems with the Satellite A665-11Z

  Hi all!

  I have problems with my laptop, the problem occurs for the most part, any time.
  (start cold upwards) on the screen with the AC is plugged and the battery to connect, the laptop stops receiving power and battery light flashes orange. I re plug the AC several times and this until the battery dies

  which gives it a while it stops then when I play a game (Team fortress 2 to be exact or ETS2) play for about 15-20 minutes until the same symptoms recur...

  I replaced the DC Jack inside the motherboard and the problem persists,

  I have baught a new real charger from ebay

  I also have repasted CPU incase of heating, but is not the issue, as it happened on a cold start upward on the screen it just completely cut to connect.

  I also installed windows 7 ultimate sp1 and update all readers
  I just installed windows 8 pro and updates installed etc.

  I removed the battery of the laptop to see if that was the problem, but it still happens, but obviously there is no battery in the laptop just turns off completely without blinking light orange on the sign of the battery

  The battery is weak it holds for 10 minutes at full load, but this isn't the question why the laptop shuts down with the charger because I removed and still...

  anyone has any idea what it is? :(

  Thank you

  I agree with you that isn't related to malfunction of the accumulator.
  The laptop should work correctly even if the battery isn't inserted.
  That's why I think there must be something wrong with the motherboard or the part connected to the mobo

  However, its really hard to talk about possible troublemakers, because he could make almost any part that affect the functionality of the laptop.

  In the case where the motherboard is affected (a kind of power provide electronic malfunction) repair will be expensive affair because the new motherboard is one of the portable computer expensive parties.

• BIOS update failed with the Satellite A210-17Z

  I was asked by Tempro to update the BIOS of my laptop Satellite A210-17Z.
  I agreed but the laptop turns off before completing the update of the BIOS. As a result, I can no longer boot my computer.

  Looking for a solution on the internet, I have read that there is a possibility of creating a crisis recovery disk. I tried to do with the Phoenix crisis package, creating a crisis with a disk recovery disk and so on.

  When you try to Flash the BIOS and the start-up of the machine, I was pretty convinced to succeed as the system did start reading the disk for about 2 minutes... but nothing happened.

  I would like to know if anyone has experience and advice to help me recover my laptop.
  I was told that I should try with the original version of the BIOS (the one I got when I bought the computer) but I do not know how to find it because I don't know what version I had at the beginning.

  Hello

  To be honest, I think Tempro is the worst app Toshiba :-(that prompts users to update the Bios and after failure of the Bios. In this forum, you can find numerous threads about the failure of the Bios. He recommended to contact the ASP (SAV) to reflash it. You can read and ask other users how to recover the Bios Phoenix:

  http://www.theeldergeek.com/forum/index.php?showtopic=21209

  Good luck!