APEX notification plugin logout/session time-out bug

Similar Questions

• session time-out

  This is the situation:

  -chanel AMFChannel

  -session expired web.xml = 1 minute

  1. from the connection of client app client and on the server in run mode I create destination for the logged-on user, and then the customer I agree a consumer for this destination. Everything is OK has send messages from the server and the client receive them, but the problem is here:

  When a minute past without any intervention from the client the session on the server is never closed, even if I wait an hour. So I rebiuld project just to try what happens if I do not agree with the destination of the customer, so now I don't use blazeds in this case the session is closed at the time. So where is the problem. BlazeDS is the open session? And how to overcome this problem, I have want to have job destination and http session that close at the time?

  Hello. With most channels, when the client is connected to the server, we keep alive HTTP session. With polling stations, your client may not be sending messages to or receiving messages from the server, but the client is actively poll the server for new messages. In general, as long as the client is connected to the server prevent us the HTTP session to time out.

  Is this a concern of security for you? The time-out should occur on the server, or is it on the client?

  If you are uncomfortable with having the timeout of the written customer a customer code to disconnect the consumer if no messages have been sent or received in a given period of time should not be too hard. You can also use the invalidate session on logout channel setting to disable the HTTP session as soon as the client sends the disconnect message to the server.

  If this solution is still a security issue, you may be able to get the HTTP session to time out using a long channel of the poll (with Mark activated and waiting-time-millis defined AMFChannel). If you set the interval-waiting-millis-1, the client will send a request to poll on the server and then demand survey will get parked on the server so that a new message arrives for the client. With the request to the server, it should not be any new request coming in it would be alive to keep the session HTTP and the HTTP session should timeout.

  I don't really like this solution because it relies on the client using a single channel to connect to the server and BlazeDS has been designed as much as possible to be independent. The behavior should be the same regardless of the channel is used.

  If you can describe in more detail a little bit what kind of behavior you want to see and why, can I apply for improvement on your behalf.

  I can see why for reasons of security we would like to be able to exhale the customer if she remained inactive for a given period of time. And by inactive I mean the customer only has not sent or received messages, not currently meant by inactive (the client is not connected to the server). Good to have feedback on how you want to see this implementation where you think this code should live (client or server) would be helpful.

  -Alex

• Auto disconnect / session time-out

  How do I leave the disconnected apex application or the session expires after, say, 20 minutes to be inactive?
  
  Elsie

  Hi Elsie,

  Goto: Tab properties of the Application-> Security .
  Then in the section Session Timeout .
  Here, you can set the required details for the Session Timeout.
  (1) maximum idle Session time in seconds
  (2) on the idle time of session timeout directly to this URL

  You can also go through:
  Components shared-> security attributes in the section Security components shared.

  Kind regards
  Kiran

• Network session time-out

  IAM a Non IT person. attempted to connect to the VPN to access my office network, impossible to do, "Netwrok connect session timed out" is popping up (nc.windows.app.23790). If I try to reconnect, I kindly help "session on the machine has expired", advises kindly to do

  * Post has been moved by the moderator of the appropriate forum category *.

  IAM a Non IT person.

  Install and configure a virtual private network is a complex process that requires the manipulation of routers and firewalls. You must ask the Manager of your desktop COMPUTING to solve this problem for you.

• & quot; Session time-out & quot;

  I was able to use Kuler normally yesterday, before the interview, which was announced on the main screen. However, today, I can't log in. I get the error message "your session has expired. Please refresh this page and sign in again. »
  
  I tried refreshing the page several times, empty my cache, erase my session data, delete my cookies Kuler... nothing's worked. I leave principle maintenance of yesterday could be responsible, but I don't know about you. Any help I can get would be great! The problem doesn't seem to be on the server side. Thanks in advance.

  Hello, we went live with a new version! Should be fixed this bug difficult Session has expired.

  If you are still experiencing this after you have updated your browser, please let us know. When you report, give your operating system/browser and steps to repro, which helps the QE to track things.

  Saami

• [ADF, JDev12.1.3] Session time-out: is it possible to perform a rederict to a URL to be composed on the basis of a model session ARVS?

  Hallo,

  using this tutorial Fortune Minds - Oracle ADF: how to redirect to a custom page each time the session of delay in the application of the ADF? I implemented a simple redirect when the session expires.

  The real URL 'redirect' should be composed according to the value stored in a var to a managed bean sessionScope, but the problem it is that... the afterPhase listener is run after the session has already expired.

  Could you kindly advice me a wokaround or a different approach to achieve this goal?

  Thank you

  Federico

  Cannot use a variable of bean in any scope as the info is gone. You can store the information in a cookie and read the form here.

  Or you use a different method like adventures of the man of Oracle ADF: heroic alternatives to avoid the annoying Popups SessionTimout ADF

  Timo

• Set session time out

  
  I start isqlplus session where I run the query sql may;

  If I leave this session for a while and come back to the re_execute sql query, I get the following error message

  SP2-0864 Session has expired. Please log in again

  How can set the session to expire unlimited expiration programmatically?

  Thank you.

  Hello

  1 - check how much you have profiles.

  SQL > select user name, profile of dba_users;

  2. If this is the default profile for the user that you are facing problem then check the idle time.

  SQL > select * from dba_profiles

  where profile = "DEFAULT".

  and resource_name in ("idle", "CONNECT_TIME");

  PROFILE RESOURCE_NAME RESOURCE LIMIT

  ------------------------------ -------------------------------- --------

  KERNEL IDLE BY DEFAULT 60

  BY DEFAULT UNLIMITED CONNECT_TIME KERNEL

  then make it unlimited

  SQL > ALTER THE DEFAULT PROFILE LIMIT IDLE BY DEFAULT;

  Thank you

  Sher

• How to change the server session time out?

  Hello

  When I start writing a file of more than about 2 MB of files using Java APIs writeResource(). My application upward changes and he says that the server time is out by throwing Exception...

  But I don't face any problem when writing to a file of about 1 MB.

  Can you tell me how set\increase the server time of the configurations.

  Concerning

  Sunil Gupta

  You should have write access to the jboss installation folder to change this settings.

  for example, if the Jboss installed on a computer, the connection in the machine and locate the following file:

  for example c:\Adobe\Adobe LiveCycle ES2\jboss\server\all\deploy\jboss-web.deployer\server.xml

  The path is just for your reference; Contact your system administrator for the exact location of this file.

  Look for the sessionTimeout and change/increase in the value attribute.

  It is clear now?

  Nith

• Related Taskflow Popup and Session time-out

  Nice day.  We use JDeveloper 11.1.2.4.

  We have a case where we are launching a taskflow in dialogue.  However, when the session expires, we get a message session timeout in the main window and the popup.  When you click ok, the user is redirected to the login inside the pop-up screen.

  I wonder if anyone has any suggestions on how to deal with this?  Ideally, it would be ideal for a single message of timeout and were redirected to the login page inside the popup window that runs the taskflow linked instead of the home page.

  Thoughts?

  BradW

  Hello

  because you cannot continue with a workflow bounded when the session expires you can use a filter of servlet on the FacesServlet and when you detect an expired session, redirect to a public landing page. However, you need to make a redirect. Alternatively, you put the warning of expiry so that the user is informed the session about to expire. This is explained in the web for the ADF Developer's guide.

  Frank

• unlimited time-out, but the idle time-out is 30 minutes per session

  Hi all

  I connect with client Anyconnect for an ASA5510 (8.2.1 (11))

  In group policy, I idle timeout = unlimited, but if I control the session in asdm and the command line

  I find idle timeout = 30 minutes.

  If I insert idle timeout = 60 in politics, in the session I see Idle timeout = 60 min.

  Is only a problem in the visualization of the session?

  Defining the 'vpn-idle-timeout none' group strategy is a misunderstood command. When it is set in group policy, it does not neutralize the idle-timeout. In the past, I filed a bug in order to clarify what this setting (see CSCsm15079) to clarify the misunderstanding. In more recent versions of the code with bug fix, context-sensitive help for command now correctly explained:

  ASA(config-Group-Policy) # vpn - idle - timeout?

  orders/options mode group policy:

  <1-35791394>Number of minutes

  No IPsec VPN: disable the time-out and allow indefinite idling;

  VPN SSL: Use the value by defect-idle-timeout

  When set to none, and you are using SSL VPN, this means that he will inherit the default-timeout defined under the Webvpn config. The default value for this command is 30 minutes, so that's probably why ASDM displays 30 minutes. If you want to adjust this value, it can be changed with:

  conf t

  WebVPN

  by default-idle-timeout

  If you want an 'unlimited' idle time, must be defined the vpn-idle-timeout in group policy for a specific number instead of "none" - the maximum that you can set to the vpn-idle-timeout command is 35791394 minutes (something like ~ 24000 days or essentially unlimited).

  Please note this post and mark it as resolved if he addressed the issue.

• APEX 5.0 Bug: apex.server.plugin pOptions is not defined

  When you call apex.server.plugin with just the identifier of the AJAX (i.e. no pData or pOptions) the following error occurs:

  TypeError: pOptions is undefined

  
  

  What happens in server.js on line 429...

  
  

  if ( pOptions.queue ) {

  
  

  As the docs says that pOptions is optional https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/javascript_api.htm#AEAPI29511 , I think it is a bug.

  
  

  When passing to a JSON null pOptions, traverse AJAX request object (confirmed this via the logging on the server), however, there is an error on the page via an alert message. Example:

  
  

  apex.server.plugin(
    myAjaxIdentifier,
    {
      x01: 'test'
    },
    {}
  );
  

  
  

  The following error message is displayed in an alert message: error: parsererror - SyntaxError: JSON.parse: unexpected end of data to column 1 of line 1 of the JSON data

  Hi Martin,

  Thanks to and for reporting this bug. I entered a bug and we will try to fix it in a version of the patch. For now, labour is about to pass an empty object to pOptions. Regarding the error you get when you do this, take a look at the answer. It cannot be valid JSON. If the response data are not JSON or there is no response data (204 no content) then you will need to use pOptions to specify the response format using the dataType pOption property. See the jQuery for this doc.

  When I tried passing an empty object I don't have the parsererror.

  Thank you

  -John

• Help: How do reset you default values for the session and the time-out at the admin level

  Hello
  
  The DBA was trying to save the settings of time-out value by following the instructions and it kept him setting a default off 28800 timeout of Session Timeout and Idle of 3600.
  
  He saved the value 1, and now we cannot get to change.
  
  How do reset you the default preferences?

  Bill,

  Sorry, I missed your point. To undo this damage, try this:

  Connect as SYS

  ALTER session set current_schema = apex_030200
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_IDLE_SEC', p_preference_value-online 3600)
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_LENGTH_SEC', p_preference_value-online 28800)
  /
  Commit
  /

  Adjust 3600 and 28800 as you like.

  Scott

• PCIe-1429 randome time-out errors

  I use a card National Instruments PCIe - 1429 Camera Link which gives timeout errors about 20% of the time every time that the show clock is stopped and restarted.

  The problem I see occurs for a 1-tap 16-bit and 8-bit 8 - tap camera configuration.  Every time the camera changes modes show link camera clock is momentarily interrupted, and PCIe-1429 is unable to acquire an image of 20% of the time.

  In Measurement & Automation Explorer, it returns the error: "a timeout error has occurred while you wait for the specified event.  If you expect a picture, make sure all the video data is acquired during the period.  If you wait for a signal, check that the assertion of signal occurs within the period.

  Now, I know that my timing is correct because if I simply stop the clock to show again the PCIe-1429 will begin to acquire images.  He was to acquire and then always correctly the images until the next time the clock of transmission is interrupted.  It is on a probability of 20% of a timeout error if the clock of transmission is interrupted.  It behaves like the phase PCIe-1429 liaison camera receiver locking loop has re-synchronization problems.

  Our camera (an intern built Kodak) uses the National Semiconductor DS90CR287 channel link transmitter.  When the PCIe-1429 gives a timeout error, I check the clock of transmission DS90CR287 on an oscilloscope and it looks always good.

  Is this a known issue with the PCIe-1429 or a known sender of DS90CR287 problem?

  Apparently, there is a bug in the DS90CR287 channel link serializer.  The phase lock loop, sometimes fails to produce a clock output series of acquisition card and the operating cycle if the input clocks are interrupted.  A phase lock loop should be able to recover from that.  We noticed that National Semiconductor changed their sheets to require power cycling the DS90CR287 after all of the input clocks are interrupted.  We have implemented the procedure of power cycle and time-out errors now appear to have stopped.

  All fixed!

• Using the MS ODBC driver to connect to Oracle and MS SQL DB - get a time-out error

  I have the driver installed and configured on the Linux host where sits the Oracle DB.  I worked through the configuration and tested along the way.

  If I execute the following SQL statement I get a timeout error after only 15 minutes:

  SQL > select * from host_table@UCMDB806;

  Select * from host_table@UCMDB806

  *

  ERROR on line 1:

  ORA-28511: interruption of the RPC connection to heterogeneous remote agent to help

  SID = ORA-28511: lost RPC connection to heterogeneous remote agent to help

  SID = (Description = (Address = (Protocol = TCP)(Host=localhost) (port = 1521)) (CONNECT_DAT

  A = (SID = UCMDB806)))

  ORA-02063: preceding the line of UCMDB9

  Process ID: 4070

  Session ID: 392 serial number: 40935

  If I limit the SQL to give hosting me only that start with 'a', I get this:

  SQL > select * from host_table@UCMDB806 where (name) lower like 'a % ';

  ID

  ------------------------------------------------------------

  NAME

  --------------------------------------------------------------------------------

  TenantID

  ------------------------------------------------------------

  name of the vendor

  --------------------------------------------------------------------------------

  softwarename

  --------------------------------------------------------------------------------

  4616

  AHOST-B

  76436

  ID

  ------------------------------------------------------------

  NAME

  --------------------------------------------------------------------------------

  TenantID

  ------------------------------------------------------------

  name of the vendor

  --------------------------------------------------------------------------------

  softwarename

  --------------------------------------------------------------------------------

  SYMANTEC

  .

  .

  .

  It seems to be a time-out on this query.  My software is located 20 minutes for a query.  MS SQL server is set to unlimited for remote queries (we did it to help isolate the timeout).  So, I guess the wait time that is happening at the level of ODBC driver.  Someone has all understand how to solve this problem?

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• my windows defender will not open or run. It indicates the time-out period has expired. Help

  an error code appears.  I can not download a new version because my vista comes with window cannot open security Defender.I either.  The time-out period has expired.  What does that mean?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902