Network session time-out

Similar Questions

• session time-out

  This is the situation:

  -chanel AMFChannel

  -session expired web.xml = 1 minute

  1. from the connection of client app client and on the server in run mode I create destination for the logged-on user, and then the customer I agree a consumer for this destination. Everything is OK has send messages from the server and the client receive them, but the problem is here:

  When a minute past without any intervention from the client the session on the server is never closed, even if I wait an hour. So I rebiuld project just to try what happens if I do not agree with the destination of the customer, so now I don't use blazeds in this case the session is closed at the time. So where is the problem. BlazeDS is the open session? And how to overcome this problem, I have want to have job destination and http session that close at the time?

  Hello. With most channels, when the client is connected to the server, we keep alive HTTP session. With polling stations, your client may not be sending messages to or receiving messages from the server, but the client is actively poll the server for new messages. In general, as long as the client is connected to the server prevent us the HTTP session to time out.

  Is this a concern of security for you? The time-out should occur on the server, or is it on the client?

  If you are uncomfortable with having the timeout of the written customer a customer code to disconnect the consumer if no messages have been sent or received in a given period of time should not be too hard. You can also use the invalidate session on logout channel setting to disable the HTTP session as soon as the client sends the disconnect message to the server.

  If this solution is still a security issue, you may be able to get the HTTP session to time out using a long channel of the poll (with Mark activated and waiting-time-millis defined AMFChannel). If you set the interval-waiting-millis-1, the client will send a request to poll on the server and then demand survey will get parked on the server so that a new message arrives for the client. With the request to the server, it should not be any new request coming in it would be alive to keep the session HTTP and the HTTP session should timeout.

  I don't really like this solution because it relies on the client using a single channel to connect to the server and BlazeDS has been designed as much as possible to be independent. The behavior should be the same regardless of the channel is used.

  If you can describe in more detail a little bit what kind of behavior you want to see and why, can I apply for improvement on your behalf.

  I can see why for reasons of security we would like to be able to exhale the customer if she remained inactive for a given period of time. And by inactive I mean the customer only has not sent or received messages, not currently meant by inactive (the client is not connected to the server). Good to have feedback on how you want to see this implementation where you think this code should live (client or server) would be helpful.

  -Alex

• Auto disconnect / session time-out

  How do I leave the disconnected apex application or the session expires after, say, 20 minutes to be inactive?
  
  Elsie

  Hi Elsie,

  Goto: Tab properties of the Application-> Security .
  Then in the section Session Timeout .
  Here, you can set the required details for the Session Timeout.
  (1) maximum idle Session time in seconds
  (2) on the idle time of session timeout directly to this URL

  You can also go through:
  Components shared-> security attributes in the section Security components shared.

  Kind regards
  Kiran

• [ADF, JDev12.1.3] Session time-out: is it possible to perform a rederict to a URL to be composed on the basis of a model session ARVS?

  Hallo,

  using this tutorial Fortune Minds - Oracle ADF: how to redirect to a custom page each time the session of delay in the application of the ADF? I implemented a simple redirect when the session expires.

  The real URL 'redirect' should be composed according to the value stored in a var to a managed bean sessionScope, but the problem it is that... the afterPhase listener is run after the session has already expired.

  Could you kindly advice me a wokaround or a different approach to achieve this goal?

  Thank you

  Federico

  Cannot use a variable of bean in any scope as the info is gone. You can store the information in a cookie and read the form here.

  Or you use a different method like adventures of the man of Oracle ADF: heroic alternatives to avoid the annoying Popups SessionTimout ADF

  Timo

• Set session time out

  
  I start isqlplus session where I run the query sql may;

  If I leave this session for a while and come back to the re_execute sql query, I get the following error message

  SP2-0864 Session has expired. Please log in again

  How can set the session to expire unlimited expiration programmatically?

  Thank you.

  Hello

  1 - check how much you have profiles.

  SQL > select user name, profile of dba_users;

  2. If this is the default profile for the user that you are facing problem then check the idle time.

  SQL > select * from dba_profiles

  where profile = "DEFAULT".

  and resource_name in ("idle", "CONNECT_TIME");

  PROFILE RESOURCE_NAME RESOURCE LIMIT

  ------------------------------ -------------------------------- --------

  KERNEL IDLE BY DEFAULT 60

  BY DEFAULT UNLIMITED CONNECT_TIME KERNEL

  then make it unlimited

  SQL > ALTER THE DEFAULT PROFILE LIMIT IDLE BY DEFAULT;

  Thank you

  Sher

• How to change the server session time out?

  Hello

  When I start writing a file of more than about 2 MB of files using Java APIs writeResource(). My application upward changes and he says that the server time is out by throwing Exception...

  But I don't face any problem when writing to a file of about 1 MB.

  Can you tell me how set\increase the server time of the configurations.

  Concerning

  Sunil Gupta

  You should have write access to the jboss installation folder to change this settings.

  for example, if the Jboss installed on a computer, the connection in the machine and locate the following file:

  for example c:\Adobe\Adobe LiveCycle ES2\jboss\server\all\deploy\jboss-web.deployer\server.xml

  The path is just for your reference; Contact your system administrator for the exact location of this file.

  Look for the sessionTimeout and change/increase in the value attribute.

  It is clear now?

  Nith

• & quot; Session time-out & quot;

  I was able to use Kuler normally yesterday, before the interview, which was announced on the main screen. However, today, I can't log in. I get the error message "your session has expired. Please refresh this page and sign in again. »
  
  I tried refreshing the page several times, empty my cache, erase my session data, delete my cookies Kuler... nothing's worked. I leave principle maintenance of yesterday could be responsible, but I don't know about you. Any help I can get would be great! The problem doesn't seem to be on the server side. Thanks in advance.

  Hello, we went live with a new version! Should be fixed this bug difficult Session has expired.

  If you are still experiencing this after you have updated your browser, please let us know. When you report, give your operating system/browser and steps to repro, which helps the QE to track things.

  Saami

• Related Taskflow Popup and Session time-out

  Nice day.  We use JDeveloper 11.1.2.4.

  We have a case where we are launching a taskflow in dialogue.  However, when the session expires, we get a message session timeout in the main window and the popup.  When you click ok, the user is redirected to the login inside the pop-up screen.

  I wonder if anyone has any suggestions on how to deal with this?  Ideally, it would be ideal for a single message of timeout and were redirected to the login page inside the popup window that runs the taskflow linked instead of the home page.

  Thoughts?

  BradW

  Hello

  because you cannot continue with a workflow bounded when the session expires you can use a filter of servlet on the FacesServlet and when you detect an expired session, redirect to a public landing page. However, you need to make a redirect. Alternatively, you put the warning of expiry so that the user is informed the session about to expire. This is explained in the web for the ADF Developer's guide.

  Frank

• APEX notification plugin logout/session time-out bug

  In one of my applications, I created a dynamic action on page 0 which fires the apex notification plugin after modal 'autoclose' event of the Skillbuilder plugin page.

  The bug is that whenever the dynamic action for notification plugin is triggered, I'm connected on the generator of the APEX.

  This bug occurs on the apex.oracle.com as well as my local instance of the APEX.

  I have reproduced this bug on apex.oracle.com.

  Workspace: OPENWORKSPACE

  username: developer
  password: Password_123

  Go to "Page 1" and click on create to open the modal window, then add an entry to trigger the event autoclose and notification plugin.

  Concerning

  Anoush

  Anoush salvation,

  you use the most recent version of the plugin (version 1.3) notification? Because nearly two years ago, we have fixed this bug. Since the release notes

  v1.3 (November 24, 2011)

  -) Fixed the problem with the CSS files that caused the underlying Application Express session to be invalidated

  I think that covers your problem. Simply download and update the plugin and you should be good.

  concerning

  Patrick

• Why my network time-out when you try to download the update for ipod?

  I keep trying to download Ipod software version 5.0.1 which takes about 2 hours, but after an hour or two, says network error message has expired. I checked all the settings that I found but nothing helped.

  Hello

  I removed the suggestion of Brian Tillman on the accounting in the Forum Feedback since I went ahead and moved this thread in a forum more appropriate responses.

  However, I still agree with his second suggestion to ask in the forums of Apple. As you mention that this problem occurs by updating your iPod, I think there must be a problem with her or with iTunes which is at the origin of the network to time out.

• Why my pc tells me network timeout errors occurred during the download of update itunes? How to change the time-out settings?

  I can download but when it comes to treatment of file I have error 3259. network time out

  Read article from Apple about the error 3259
  iTunes Store report error - 3259

  http://support.Apple.com/kb/TS2799

  Thank you

• unlimited time-out, but the idle time-out is 30 minutes per session

  Hi all

  I connect with client Anyconnect for an ASA5510 (8.2.1 (11))

  In group policy, I idle timeout = unlimited, but if I control the session in asdm and the command line

  I find idle timeout = 30 minutes.

  If I insert idle timeout = 60 in politics, in the session I see Idle timeout = 60 min.

  Is only a problem in the visualization of the session?

  Defining the 'vpn-idle-timeout none' group strategy is a misunderstood command. When it is set in group policy, it does not neutralize the idle-timeout. In the past, I filed a bug in order to clarify what this setting (see CSCsm15079) to clarify the misunderstanding. In more recent versions of the code with bug fix, context-sensitive help for command now correctly explained:

  ASA(config-Group-Policy) # vpn - idle - timeout?

  orders/options mode group policy:

  <1-35791394>Number of minutes

  No IPsec VPN: disable the time-out and allow indefinite idling;

  VPN SSL: Use the value by defect-idle-timeout

  When set to none, and you are using SSL VPN, this means that he will inherit the default-timeout defined under the Webvpn config. The default value for this command is 30 minutes, so that's probably why ASDM displays 30 minutes. If you want to adjust this value, it can be changed with:

  conf t

  WebVPN

  by default-idle-timeout

  If you want an 'unlimited' idle time, must be defined the vpn-idle-timeout in group policy for a specific number instead of "none" - the maximum that you can set to the vpn-idle-timeout command is 35791394 minutes (something like ~ 24000 days or essentially unlimited).

  Please note this post and mark it as resolved if he addressed the issue.

• HP OfficeJet 6500 (not wireless) times out on the network after various periods of inactivity

  Hello

  As the subject says, I have a HP 6500 from JO that will expire after a random period of inactivity on the network.  It will not respond to print jobs, pings, http for its Web page requests, or scan nmap.  Stop/restart the printer temporarily resolves the issue until it times out again.  I think it is not related to drivers, because there is no need of drivers installed on a machine on the network.  Anyone has any idea on what this could be?  Has anyone experience this problem?  I have no history of problems of auto-negotiation on my network (I am dealing with devices at work who do not play nice with auto-negotiation, and the only option for them was to put it to manual), but just in case, I changed the setting manually set to 100 Mbps Full.  Having just done this, I do not have yet to see if this changes what anyone, but I want to see if someone else has all possible solutions.

  Thank you.

  It seems that the static IP address has been resolved - it has not yet expired since I put it.  It seems that he fixed - lease DHCP renewal seems to give this printer problems.

• 14 Adobe photoshop elements requires registration at the start and then the process times out, say that there is no network connectivity

  When you try to start the program that a window pop up - registration required. The process of application certificate (implemented at least a dozen times). The process times out, say there is no network connectivity, which is a nonsense at least at my end. Same behavior applies for the first loose. I have the license keys for both products and they appear under my adobe account. However, because of the described behavior I can't use the products.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Help: How do reset you default values for the session and the time-out at the admin level

  Hello
  
  The DBA was trying to save the settings of time-out value by following the instructions and it kept him setting a default off 28800 timeout of Session Timeout and Idle of 3600.
  
  He saved the value 1, and now we cannot get to change.
  
  How do reset you the default preferences?

  Bill,

  Sorry, I missed your point. To undo this damage, try this:

  Connect as SYS

  ALTER session set current_schema = apex_030200
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_IDLE_SEC', p_preference_value-online 3600)
  /
  wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_LENGTH_SEC', p_preference_value-online 28800)
  /
  Commit
  /

  Adjust 3600 and 28800 as you like.

  Scott