Related Taskflow Popup and Session time-out
Nice day. We use JDeveloper 11.1.2.4.
We have a case where we are launching a taskflow in dialogue. However, when the session expires, we get a message session timeout in the main window and the popup. When you click ok, the user is redirected to the login inside the pop-up screen.
I wonder if anyone has any suggestions on how to deal with this? Ideally, it would be ideal for a single message of timeout and were redirected to the login page inside the popup window that runs the taskflow linked instead of the home page.
Thoughts?
BradW
Hello
because you cannot continue with a workflow bounded when the session expires you can use a filter of servlet on the FacesServlet and when you detect an expired session, redirect to a public landing page. However, you need to make a redirect. Alternatively, you put the warning of expiry so that the user is informed the session about to expire. This is explained in the web for the ADF Developer's guide.
Frank
Tags: Java
Similar Questions
-
I have an iPod hooked up to a Pioneer AVH-X4700BS 160, and nine times out of ten the iPod reads OK TO DISCONNECT.
It seems normal. What happen?
-
Try to publish on my Muse BC and it times out.
I've been tryng to publish a simple page to muse BC and it times out, manage it before our era under file is grayed out.
Don't know what else to do?
Hello
If you receive error 'access using your AdobeID has expired. Check your network connection and try again"then try this,
Disconnect Muse
restart the muse
connection again
And republish the site.
If you receive a different error message, please let us know the exact error message, or a screenshot of the error message.
-
Help: How do reset you default values for the session and the time-out at the admin level
Hello
The DBA was trying to save the settings of time-out value by following the instructions and it kept him setting a default off 28800 timeout of Session Timeout and Idle of 3600.
He saved the value 1, and now we cannot get to change.
How do reset you the default preferences?Bill,
Sorry, I missed your point. To undo this damage, try this:
Connect as SYS
ALTER session set current_schema = apex_030200
/
wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_IDLE_SEC', p_preference_value-online 3600)
/
wwv_flow_platform.set_preference (p_preference_name-online 'MAX_SESSION_LENGTH_SEC', p_preference_value-online 28800)
/
Commit
/Adjust 3600 and 28800 as you like.
Scott
-
This is the situation:
-chanel AMFChannel
-session expired web.xml = 1 minute
1. from the connection of client app client and on the server in run mode I create destination for the logged-on user, and then the customer I agree a consumer for this destination. Everything is OK has send messages from the server and the client receive them, but the problem is here:
When a minute past without any intervention from the client the session on the server is never closed, even if I wait an hour. So I rebiuld project just to try what happens if I do not agree with the destination of the customer, so now I don't use blazeds in this case the session is closed at the time. So where is the problem. BlazeDS is the open session? And how to overcome this problem, I have want to have job destination and http session that close at the time?
Hello. With most channels, when the client is connected to the server, we keep alive HTTP session. With polling stations, your client may not be sending messages to or receiving messages from the server, but the client is actively poll the server for new messages. In general, as long as the client is connected to the server prevent us the HTTP session to time out.
Is this a concern of security for you? The time-out should occur on the server, or is it on the client?
If you are uncomfortable with having the timeout of the written customer a customer code to disconnect the consumer if no messages have been sent or received in a given period of time should not be too hard. You can also use the invalidate session on logout channel setting to disable the HTTP session as soon as the client sends the disconnect message to the server.
If this solution is still a security issue, you may be able to get the HTTP session to time out using a long channel of the poll (with Mark activated and waiting-time-millis defined AMFChannel). If you set the interval-waiting-millis-1, the client will send a request to poll on the server and then demand survey will get parked on the server so that a new message arrives for the client. With the request to the server, it should not be any new request coming in it would be alive to keep the session HTTP and the HTTP session should timeout.
I don't really like this solution because it relies on the client using a single channel to connect to the server and BlazeDS has been designed as much as possible to be independent. The behavior should be the same regardless of the channel is used.
If you can describe in more detail a little bit what kind of behavior you want to see and why, can I apply for improvement on your behalf.
I can see why for reasons of security we would like to be able to exhale the customer if she remained inactive for a given period of time. And by inactive I mean the customer only has not sent or received messages, not currently meant by inactive (the client is not connected to the server). Good to have feedback on how you want to see this implementation where you think this code should live (client or server) would be helpful.
-Alex
-
IAM a Non IT person. attempted to connect to the VPN to access my office network, impossible to do, "Netwrok connect session timed out" is popping up (nc.windows.app.23790). If I try to reconnect, I kindly help "session on the machine has expired", advises kindly to do
* Post has been moved by the moderator of the appropriate forum category *.
IAM a Non IT person.
Install and configure a virtual private network is a complex process that requires the manipulation of routers and firewalls. You must ask the Manager of your desktop COMPUTING to solve this problem for you.
-
Auto disconnect / session time-out
How do I leave the disconnected apex application or the session expires after, say, 20 minutes to be inactive?
ElsieHi Elsie,
Goto: Tab properties of the Application-> Security .
Then in the section Session Timeout .
Here, you can set the required details for the Session Timeout.
(1) maximum idle Session time in seconds
(2) on the idle time of session timeout directly to this URLYou can also go through:
Components shared-> security attributes in the section Security components shared.Kind regards
Kiran -
Hallo,
using this tutorial Fortune Minds - Oracle ADF: how to redirect to a custom page each time the session of delay in the application of the ADF? I implemented a simple redirect when the session expires.
The real URL 'redirect' should be composed according to the value stored in a var to a managed bean sessionScope, but the problem it is that... the afterPhase listener is run after the session has already expired.
Could you kindly advice me a wokaround or a different approach to achieve this goal?
Thank you
Federico
Cannot use a variable of bean in any scope as the info is gone. You can store the information in a cookie and read the form here.
Or you use a different method like adventures of the man of Oracle ADF: heroic alternatives to avoid the annoying Popups SessionTimout ADF
Timo
-
I start isqlplus session where I run the query sql may;If I leave this session for a while and come back to the re_execute sql query, I get the following error message
SP2-0864 Session has expired. Please log in again
How can set the session to expire unlimited expiration programmatically?
Thank you.
Hello
1 - check how much you have profiles.
SQL > select user name, profile of dba_users;
2. If this is the default profile for the user that you are facing problem then check the idle time.
SQL > select * from dba_profiles
where profile = "DEFAULT".
and resource_name in ("idle", "CONNECT_TIME");
PROFILE RESOURCE_NAME RESOURCE LIMIT
------------------------------ -------------------------------- --------
KERNEL IDLE BY DEFAULT 60
BY DEFAULT UNLIMITED CONNECT_TIME KERNEL
then make it unlimited
SQL > ALTER THE DEFAULT PROFILE LIMIT IDLE BY DEFAULT;
Thank you
Sher
-
How to change the server session time out?
Hello
When I start writing a file of more than about 2 MB of files using Java APIs writeResource(). My application upward changes and he says that the server time is out by throwing Exception...
But I don't face any problem when writing to a file of about 1 MB.
Can you tell me how set\increase the server time of the configurations.
Concerning
Sunil Gupta
You should have write access to the jboss installation folder to change this settings.
for example, if the Jboss installed on a computer, the connection in the machine and locate the following file:
for example c:\Adobe\Adobe LiveCycle ES2\jboss\server\all\deploy\jboss-web.deployer\server.xml
The path is just for your reference; Contact your system administrator for the exact location of this file.
Look for the sessionTimeout and change/increase in the value attribute.
It is clear now?
Nith
-
&; quot; Session time-out &; quot;
I was able to use Kuler normally yesterday, before the interview, which was announced on the main screen. However, today, I can't log in. I get the error message "your session has expired. Please refresh this page and sign in again. »
I tried refreshing the page several times, empty my cache, erase my session data, delete my cookies Kuler... nothing's worked. I leave principle maintenance of yesterday could be responsible, but I don't know about you. Any help I can get would be great! The problem doesn't seem to be on the server side. Thanks in advance.Hello, we went live with a new version! Should be fixed this bug difficult Session has expired.
If you are still experiencing this after you have updated your browser, please let us know. When you report, give your operating system/browser and steps to repro, which helps the QE to track things.
Saami
-
APEX notification plugin logout/session time-out bug
In one of my applications, I created a dynamic action on page 0 which fires the apex notification plugin after modal 'autoclose' event of the Skillbuilder plugin page.
The bug is that whenever the dynamic action for notification plugin is triggered, I'm connected on the generator of the APEX.
This bug occurs on the apex.oracle.com as well as my local instance of the APEX.
I have reproduced this bug on apex.oracle.com.
Workspace: OPENWORKSPACE
username: developer
password: Password_123Go to "Page 1" and click on create to open the modal window, then add an entry to trigger the event autoclose and notification plugin.
Concerning
Anoush
Anoush salvation,
you use the most recent version of the plugin (version 1.3) notification? Because nearly two years ago, we have fixed this bug. Since the release notes
v1.3 (November 24, 2011)
-) Fixed the problem with the CSS files that caused the underlying Application Express session to be invalidated
I think that covers your problem. Simply download and update the plugin and you should be good.
concerning
Patrick
-
last execution of procedure and relaxing time-out
Hello
How will I know when the procedure was executed the last time? I would like to know if some old procedures and triggers are used by any application or not.
Thank you
SandyOracle does not follow when a PL/SQL block was performed last time by default. The code itself would either need to write in a journal or your DBA would need enable auditing for you to follow this kind of thing.
Justin
-
OPENINFO and SesTm (session time limit)
Hi all
And thanks in advance.
We do not quite understand SesTm and his behavior. (We spent a lot of time to read about it and yet)
We have SesTm = 60 (and transaction time-out set to 5 min) how is a call to the database last 10 min and then come back with "ORA-02049?
* ' ORA-02049: timeout: distributed transaction waiting for lock.
(1) why the query does not return after 60 sec with an error like SesTm = 60 instructs?
* May be that we do not understand SesTm. (please advice)
(2) why the query only returns after 5 min, as indicated the transaction timeout? (TMQFORWORD 300 t)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Documentation of ADDITIONAL (OPTIONAL) INFORMATION from SesTm
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The definition of SesTm:
"SesTm = session_time_limit".
Specifies the maximum number of seconds in a transaction between a service and another, or between a service and the commit or rollback of the transaction before the transaction system is abandoned. For example, SesTM = 15 indicates that the idle session time is 15 seconds.
For example, if the TPM is used between the client and server remote procedure calls, then SesTM applies both between the completion of a RPC and the opening of the next CPP, the tx_commit or the tx_rollback.
A value of 0 indicates no limit. Enter a value of 0 is strongly discouraged. He can tie up resources for a long time if something goes wrong. In addition, if a child process SesTM = 0, then the SesTM parameter only come into force after the parent process is finished. »
You can learn more about OPENINFO here:
http://download-East.Oracle.com/docs/CD/B19306_01/AppDev.102/b14251/adfns_xa.htm#i1006488
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Concerning
TechSgin
Edited by: TechSgin may 6, 2010 14:09
Edited by: TechSgin may 6, 2010 14:42You are absolutely right on me mix up of PERIOD with SCANUNIT - is SCANUNIT which determines the maximum possible "rounding error" in wait times (blocking or transactional). PERIOD has nothing to do with the situation you described, the blocking wait times have always yield to transaction delays.
Sorry for my mistake, fortunately you seem to have understood what I wanted anyway :-)Best regards
/ By -
I am trying to migrated one turned off the virtual computer. Migration ends at 39% and then times out. The error message is not particularly useful. It says "Operation timed out." Does anyone have experience with this? Is there a configurable timer linked to migration?
Try to remove the virtual machine of the inventory of the VC (do not drive remove), and then add it before you try again vmotion.
Maybe you are looking for
-
Given that I have installed OS X10.115 El Capitan on my iMac 24 4 g memory 2.66gh I have a rectangularbox around my pointer, how can I get rid of him?
-
Satellite Pro P500 - standby and Shut Down crashing
I have a Satellite P500. Bought new with Windows 7. It is new and has had a bad hard drive replaced. Since then, I've reconfigured everything and everything seems to be working - except when the sleep and the closure are activated, they do not work.
-
Sharing notes iCloud, do not sync on devices of my wife
My wife and I have an iPhone, iPad and Mac. My account main iCloud is JeffCloud@iCloud and I use it as my account real iCloud on my 3 devices and Notes turned on. His main iCloud is [email protected] and it's what it uses as its real iCloud accou
-
Looking for drivers for the video controller and PCI Modem for nx9020 running windows 7 - I hope someone can help me thanks in advance
-
Switching providers using Windows Media Center
I've been using Windows Media Center as a DVR with Verizon FiOS for a couple years now, but I'm going to switch service providers soon to Optimum to save money. WMC will recognize that there is a new cablecard immediately and ask me to put up? In add