Appearance Office problem

Similar Questions

• Microsoft office problem - HP Pavilion Notebook PC g6

  Name of product: notebook PC HP Pavilion g6

  Windows 8

  the problem: when I open microsoft office, it says enter product key

  where can I find this key?

  You will need to purchase a key of Microsoft Office on the online store from Microsoft or a vendor who sells the version you want.

  Computers laptops HP are not delivered with Microsoft Office, unless it's a trial version. Laptops have been delivered a few years back with Microsoft Office Starter. Which is no longer supported by Microsoft and laptop manufacturers about two years ago.

• install microsoft office problems

  Complete Itrying to install the version of office home and student, system freezes before the installation is complete.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions at the general office issues

  Top Office newsgroups will help you.

  You are in Forum Windows Vista update.

  See you soon. Mick Murphy - Microsoft partner

• Installation card video-on-demand p7 - 1456c Office - problems

  Hello

  Recently I bought HP p7 desktop computer - 1456c and am trying to install a video about this card. (he uses the graphical subsystem integrated initially)

  First of all, I bought a new power supply (Corsair 500w one), because the original 300w wouldn't support it.

  The power supply, I installed and it works very well, my PC boots and works.

  Then I tried to install my video card, which is a Nvidia EVGA GTX 650.

  The hardware installation was not a problem, but no matter what I do, I have no video output.

  I am trying to determine if I have a defective hardware (video card) or if I have other problems.

  Is it necessary to configure the settings of the BIOS with this computer?

  The menu of the BIOS that I see is this:

  http://support.HP.com/us-en/document/c03383166

  I tried the things:

  * Disconnected and reconnected the video card to the PCI-e slot connectors and power him

  Tried both DVD-DVD-D ports with different cables and I

  * Tried to disable the secure in the BIOS boot option

  * Make that PCI-e port is enabled in the BIOS

  I know for sure that the computer starts, I hear sounds loading and can get into Windows.

  When the video card is installed, there is simply no video output.

  The monitor and cables I used works very well; There are good output video when I don't have the video card installed and use the onboard graphics with the same cable and monitor.

  Is there something else I should have tried, or are there problems of compatibility between this computer and the graphics card, I may have a problem with the motherboard or it's most likely a problem with the video card, I bought?

  I don't have access to another computer or graphics card to try.

  Thank you.

  Here are the specifications of your computer HP Pavilion p7 - 1456c. According to the specification, this model comes with Windows 8 factory-installed. Because it has Windows 8 is installed, it also has a BIOS feature called "Secure Boot" which is enabled by default. In addition, there an other BIOS feature called 'Legacy Support', which is disabled by default. Many video cards are not compatible with Secure Boot and it should be DISABLED for the video card work properly. Sometimes it takes that legacy Support is also ENABLED. Normally, you will receive an error code of BIOS indicating a video failure but not always.

  Please change the BIOS settings listed above, so that using the factory an integrated graphics card. Then, reinstall the new video card and connect the additional power required. Now, start the computer by using the new video card... What are the results? This solve your problem? If this isn't the case, you may have a bad power supply or video card.

  Please send Bravo

• Help! I can't restore my appearance in the control panel its all jumbled.can you help me? is it a default option for appearances in my computer?

  My Control Panel is blurred. my text look shady.my taskbar is outta wack.please help me.

  Hi,   1. this happens only with Panel? 2 you have any problem in appearance Office? 3. did you last changes made on your computer?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: Troubleshooting with Windows Aero http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Windows-Aero

• After uninstalling printer Windows Installer and Microsoft Office error "this update package not could be opened"

  Original title: Windows Installer and Microsoft Office problems after you have uninstalled the printer

  I tried to install more than one printer, a HP Photosmart C4280 by downloading the drivers and updates on the HP site. I uninstalled the printer after it failed to scan a document and I had no more use for it. Then the trouble started. When I tried to open some programs (iTunes, Skype, etc.) for the first time after the uninstall of the printer, a window "Windows Installer" popped up. After you have configured Windows Installer, the program would open normally. However, when I try to open any Microsoft Office programs (Word, Excel, etc.), Windows Installer appears, but it turns into a window that reads:
  "This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. »

  Microsoft Office programs are open at all, and I desperately need my programs of Microsoft Office to work even faster. I would appreciate it if Windows Installer will stop trying to configure when I open a program also. Can someone help me please?

  Hi Jennifer7,

  It is sufficient to indicate the complete error message you receive.

  Method 1: To solve the problem of Windows Installer, follow the steps

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2: Follow the steps mentioned in the article below which addresses Office question

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "" the installation source for the product is not available".

  http://support.Microsoft.com/kb/932857

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the question of the Office has not changed, you can post your request in the Office forums for more specialized help.

  Office forums

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1

• PROBLEM WITH MY OPERATING SYSTEM AND LAPTOP COMPUTER PART 3

  Hi all

  I speak not of what I already writtent here on my computer issues have, if you feel lost just report to my previous post below. Thank you all for your help. The following messages appear on the screen of my laptop:

  'msnmsgr.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "Skype.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  "OSA.exe file corrupted the file C:\Users\MYNAME\AppData\Local\Temp directory is corrupted and unreadable. Please run the ChKdsk utility "

  At some point of time, I got the following message "cannot install required Windows files make sure all files required for installation are available, and restart the installation of the error Code: 0 x 80070571" after trying to reinstall Vista.

  Today, I tried to install WinCleaner OneClick to solve problems has my laptop, but I got this message: Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-B29TV.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-AO2P4.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-819TT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-UARNT.tmp error 1392: the file or directory is corrupted and unreadable".

  Setup could not create the directory "C:\Users\MYNAME~I\AppData\Local\Temp\is-J8ISF.tmp error 1392: the file or directory is corrupted and unreadable".

  When I open the device under Network Manager maps I saw a yellow triangle with an exclamation mark in front of Microsoft ISATAP #2 with a message "the device status this device does not work properly because Windows cannot load the drivers required for this device (code 31)"

  Below, you will find all the information you need to help me solve these problems with my laptop, because I do not have how to keep a current thread. Once again, thank you for your help

  FIRST POST OF THIS THREAD

  Greetings to one and all and I thank very you much for your help to help me.

  I have a laptop Dell Inspiron 1501 with Windows Vista Home Basic AMD Mobile Sempron processor. Recently, I tried to upgrade the free version of my Antivir Avira antivirus for a trial version, but during the process, I lost my internet connection. Sometimes, my network shows another "Local and Internet" and "Local" only. However, in both cases I am not able to connect to the Internet. Whenever I try to open a page in the browser, it is blank and nothing appears on the screen... I also try to reinstall the operating system, but since I can't access the Internet when I reached the point of the process called "GET IMPORTANT updates to UPDATE for the INSTALLATION" where I have to choose between two options a) go online to get the latest updates (recommended) and b) do not get the latest updates for facilities , I can only opt for the other that says that the installation may fail. Therefore, it seems that I cannot even reinstall the operating system. In addition, I often small windows to appear on my screen as "msnmsgr.exe" "skype.exe" "OSA.exe" file corrupted with such messages "the file C:\Users\ myname\AppData\Local\Temp directory is corrupted and unreadable. Please run the chkdsk utility ". However, the problem is I can't run the check disk, because every time I have it try I got the following message "checking file system on C, the type of files is NTFS one of your disks needs to be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue"until I read the whole message again appears" the disk check was cancelled ". I am not able to get the help and Support Windows open, but on the window I only heard the message "you have lost your connection using Windows and support". I don't know what to get my computer works well and my connection internet back. Someone here tell me step by step what to do to solve all the problems mentioned above? I am very grateful to each of you. Please, note that from my computer I have not access to Internet, so tell me any solution which will take me to use my computer to connect to the Internet. Sorry for the length of my post.

  PS at the beginning of this problem I used to have errors with their code on the screen of my laptop, but unfortunately I did not take account of their > more, for to appear the problem worsens my computer was a bit slow

  SECOND POST OF THIS THREAD

  First of all, thanks a lot to you all and especially to the Lorien-SpiritX and their insightful answers. As they both suggest to me I tried sfc/scannow and I received the following message on my laptop screen "start the phase of checking system scan audit 44% complete Windows resource protection could not perform the requested operation"

  I did also check CHKDSK/f/r utility Office and I received the following message "the type of the file system is NTFS cannot lock drive current CHKDSK cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts "and I answered Yes

  In addition, I tried to use my CD to reinstall my operating, but if it starts well by copying files to the end of the process, when the second stage of the process "expand our files" starts, it stops at 27% and never goes further.

  These are all questions, added to all that I already mentioned in my first post with the same title

  This looks like failing hardware, not software. I would look at the hard drive first, and then the RAM and the motherboard.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If the computer is still under warranty, contact Dell technical support.

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.

  MS - MVP - Elephant Boy computers - don't panic!

• Office of the pen is not firefox

  Regularly, I insert hyperlinks in text OO documents. New hyperlinks inserted in a get of document text error message cannot find a web browser on your system, even hyperlinks inserted in the same document (I use an old document, "" registered under "and change parts of it to create a new") still works perfectly. Using OSX 10.8.5, Firefox 40.0.3. The original document was created before the latest version of Firefox. I tried to insert a hyperlink into a new text document and it didn't work either. Swapped the default browser Safari and back to Firefox, no luck. Not sure if this is related to the update of Firefox or Open Office problem. (OO tells me to install a web browser - suggest Mozilla - or modify desktop preferences.) The latter is meaningless for me)

  Welcome to all thoughts. Deadline for the next report to people who rely on external references is imminent!

  HI sandalholme,
  It's strange, but ask to install a browser to open an OO document URLS. I joined where preferences are for the default browser in the General settings. Firefox is listed here?

  • You are using version 2011? http://answers.Microsoft.com/en-us/Ma.../aae07aa7-9e07-4a41-b916-23de62ee6028
  • It is also mentioned that you may need to disable the automatic correct function in the preferences: http://answers.microsoft.com/en-us/ma.../09303d90-3fff-4024-94d3-c52b1970cb7f

  To reset Firefox sometimes.

• Re: Imagem om my Toshiba with problems

  Hello world

  When I start my laptop, the picture on the screen appears with problems, cannot read letters and some traces in the vertical. When windows start, displays a blue screen with a memory error but I can read because it disappears very quickly.

  I thing (I'm not sure) that may be a problem with the graphics card. I removed the ram cards and switch, but problems remain.

  Any ideas?

  Hello

  Yes, BSOD is the product of a software or hardware problem.
  Since you have a few vertical lines on the screen, the graphics chip could be affected.
  Seems only service technicians would be able to help by the way: what laptop do you have?

• SkyDrive displays blank thumbnails of photos. No problem in IE8

  Uploaded many photos on Skydrive. When I go into my Hotmail account I can't display an any of them - filenames are displayed, but not thumbnails. If I do the same thing with IE8, they appear without problem. Seems to be a FF issue but have tried all obvious checks on parameters etc.

  See:

  • http://KB.mozillazine.org/Images_or_animations_do_not_load
  • The problems that cause images to not show
  • A way to see what images are blocked is to click on the favorite icon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button opens the Security tab of the "Page Info" window (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll though the list with the arrow pointing downwards.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• Re: Satellite A300-29n - blue screen appears during installation of XP?

  Hello

  I'm working on windows vista and no problems
  When I tried to put in place XP on the machine, after loading windows files
  It was written "the installation program starts windows.
  everything was fine
  a blue screen appeared (a problem has been detected and windows has shut down to prevent damage to the computer...)
  Please help me
  Thank you

  Hello

  Go to BIOS (press F2 during the laptop turn on) and change the compatible SATA AHCI mode.
  Save the changes and try to install again the Win XP on this laptop.

  Good luck

• Speed problems according to the channel in which I connect - Possible hardware problem:

  Hello

  I bought a R8000 about 1 month, and it worked pretty well. Last week, I read a review on the router suggested what a turn on the Smart Connect. That's when the problems started.

  -Panda USB wireless that worked perfectly started to have speeds of 1.5 Mbps when my service is Comcast 150MBps explosion. Before turning on the S.C., it reaches that speed easily.

  -After the filming of Smart Connect, did not improve the performance of the USB dongle. It is remained at 1.5 Mbps to 3MBPs. I tried to fix it for a week now.

  -J' I reset the modem (button reset button for 10 seconds), configured my router again and added to my dongle is malfunctioning, the router started having trouble to detect my external WD "My passport".

  Today, troubleshooting the wireless dongle with Panda, I changed the channel 5 GHz at the elementary school and the speed is back to 170 Mbps. The router is kept at approximately 3 M from the computer without any obstacles between them.

  Finally, the streaming of my router (with cable) to my TV using DLNA sometimes stutters. yesterday, she even caused the TV to not recognize the transmitted file.

  Can you help me troubleshoot the router more far to find if it is defective?

  Thank you

  As I started the topic, I would give it a closure. My problem was that I had a USB Wireless Dongle of Panda, who performed in the secondary channel (high way) but ridiculously low in the primary (Channel Low). As I had Smart Connect lit, I couldn't control my connected computer channel and appeared the problem was with the router.

  That said, I noticed a better balance between devices when I disabled the dynamic QoS option. I don't know if the algorithm for dynamic QoS is simply wrong or its implementation by the current firmware (V1.0.3.4_1.1.2) is buggy.

  In any case, currently, everything works with me. Explosion of Comcast 150Mbps and rapid tests is between 157 to 153Mbps in tests using a channel 5 G.

• Chromecast and Airplay on the Netgear wndr 4500v2 connection problems

  I hope someone is able to help me with two questions, I have based on Chromecast and Airplay.

  Chromecast problem:
  Material: OS Android Lollipop 5.1.1 on a Sony Xperia Z2, 10 Windows on a laptop Lenovo S440 and Chromecast 1.

  Chromecast worked fine for a year with the same material. For two months, the Chromecast became unstable. When I want to stream Netflix from my Android phone then Chromecast icon is not available or the ico is available but when I select the icon disappears. That's why I have to reset the router and then it does not work properly. It continues to work fine until the next day. Then the same problem occurs. I have to reset the router every day when I want to use the Chromescast. I installed the new firmware again on the router, but this has not solved the problem. The router settings are accurate as described in the pages of Chromecast and netgear support.

  Problem of airtime
  Material: iPhone 4 iOS 7.1.2 Marantz receiver SR 6006, including air time, DHCP is enabled, latest firmware has been downloaded, exact version is not mentioned.

  When the Chromecast problem appeared the problem of airtime appeared as well. When I use Spotify (latest version 4.1.0.941) on the iPhone 4 the Airplay icon will no longer appear. Before that, airplay icon is available for several years and he always worked without problem as well with my old router like netgear router with current 4500v2. For some reason any Airplay is no longer in effect. The router's settings are not changed.

  Help or advise is welcome.

  The problem is perhaps due to interference, especially if both you are on the same channel.

  Better, it is recommended that you set a different channel to avoid such problems.

  Keep us updated, and I hope that this solves the problem.

• Display/appearance properties doesn't let me choose the XP Style for windows and menu items, etc.

  My XP Pro crashed, and the only solution was a re - format and re-install. Once back online, updates installed (64 of them!) and one or more of them now changed my appearance Office (from blue to gray, boxy... classic windows XP theme around the time of Win 95), display/appearance properties refuses to allow me to choose the XP Style. How can I fix?

  Thank you
  -- ! elbakrameR®-

  Start the themes service? See the following article for resolution.

  You cannot change your desktop theme in Windows XP:
  http://support.Microsoft.com/kb/883391
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• problem with graphic dv2600

  I have laptop hp Pavilion dv2600, it was the failure of GPU, displys 6 screens, please help me to give me any suggestions

  Hi dv2600,.

  Welcome to the Forums of HP Support!

  I'm happy to help, but it would be better to get the full product number and the version of the OS. Please see the following documents if you need help to find those.
  How can I find my model number or product number?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Did you get the error messages for the first, this took place or are there displayed error messages now? If so, what is the exact message?

  As a first step, I start with these pages and try to update video drivers.

  Video graphics issues

  Driver downloads & on this page you must enter the product number, and then select your operating system, access the correct driver for your laptop.

  If after this, the graphics are always the same, 6 screens describe you then I would look at these:
  Problems related to laptop (Windows 7 and Windows 8) displays
  The problems with the brightness of the screen
  Diagnose a display LCD (LCD) for damage

  If it doesn't appear that problem is certainly material then I would recommend fitness phone support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Kind regards