appears that constantly tries to open a program

Similar Questions

• whenever I tried to open a program, a window opens asking me programs that should be used to open the other program

  I was remove some unnecessary programs and sudennly the computer ask me which program to use to open the other program. I turned off the computer and then I used safe mode to see if I could restore my computer to a quick setup. but the very thing. I don't know if I erased by mistake som program. This never happened to me before. I use windows XP. I use internet explore to open a program and send me just for internet explorer, but not programs to opt I want you use. Any help o help to solve this problem? I'll apreciate any help thanks.

  Hello

  I suggest you to related changes by default by using Set Program Access and computer defaults:

  Method 1:

  How to change your default programs and enable or remove access to Microsoft Windows programs and non-Microsoft: http://support.microsoft.com/kb/332003

  Method 2:

  How to change or choose the program that starts when you double-click a file in Windows XP.

  http://support.Microsoft.com/kb/307859

  Method 3: If the problem persists, then try to create a new user account and check if it helps.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Hope this information is useful.

• Error - the application or DLL is not a valid windows image. Please check this against your installation diskette when trying to open a program or start the computer.

  Original title: bad image.

  I get two errors of bad image whenever I open a program or start a computer, for each program.  the error that says "the application or DLL is not a valid windows image. "Please check this against your installation diskette" I don't have any disk and don't know what to do.

  These file names, look a little suspicious and didn't get good Google search results, so I think that the first thing to do is to tell us a little about your system.  Now you can enjoy when you report a problem, provide you with any error messages you see and not a part of it (not paraphrase either).

  The second thing to do is to try to be reasonably sure that your system is free of malware and then if you have these problems, you can fix them (which would be the third thing to do).

  I still wonder why the Microsoft Support Engineer made you reference to an article that makes no sense at all...

  The first thing to do:

  Unfortunately, MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  The second thing to do:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  The third thing to do:

  Restart your computer and solve the outstanding issues.

• Getting error while trying to open a program on Windows 7

  

  Everytime I open a program, I keep getting this error report or a similar one. Anyone know what is happening?

  Hello

  Thanks for the reply.

  As you tried to put the computer to boot, but the problem persists, I suggest to create a new user account and check if the problem still persists.

  See the following Microsoft support Article to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  You can also see the following Article in the Microsoft help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Try these steps and let us know the results for assistance.

  Thank you.

• Player tries to open all programs

  After installing the drive 11.0.03, I can't open or run any program but pdf. Always the player to try to open the program and all the icons are adobe readers. Uninstall solves the problem, but then I can't open PDFs... seems to be a situation of 'catch '... 22

  See sicelle contributes to:

  http://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acroba ANSI.org/access/access_t.html

• my dvd is battery and does not open after that I tried to install a program.

  Hello

  I started to install a program on my laptop.

  The installation did not pass. And the cd is stack on the disc and does not open.

  On my computer, it does not see the drive that reports to the Conference on disarmament.

  shows that C; and f:

  Hello Arturomaduro,

  By "stack" I assume you mean that the CD/DVD is 'stuck' in the player and you cannot get the drive to open it? The most important thing right now is to get the DVD from the drive. You have two options.

  1 / restart your PC and press the eject button on the CD/DVD drive to see if the drive open and release the CD/DVD. Normally, this should do the trick.

  2 / if my first option does not release the disc caddy, you will need a large paperclip and bend straight. Take a look at the front of your DVD drive and you should see a small hole. This is usually placed near the eject button. Make sure that your PC is off and you have removed the plug from the socket. Now insert the straigtened paper clip into the hole and the 'push' the draw caddy should now begin to open (or open completely). If it opens only paritally, then gently pull the draw caddy until it opens completely and then remove the CD/DVD. After removing the CD/DVD push the caddy draw lots to close. Be sure to gently push to clear the draw caddy.

  Maybe it's just a unique and the player will operate normally afterwards. If she keeps refusing to eject a CD/DVD, there may be something wrong with the CD/DVD unit itself.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows Installer runs when trying to open any program

  original title: Installer windows continues execution

  to restore computer to 10 days ago.very hard do.have vista 64 svc pk 2 4 gig memory 4 fifths free.  This happened after my system came down very shortly after that I used Mr. fixit to sucessfully remove office 2003 pro and I reinstalled successfully.  I was trying to get my updates made when it went down.  When I got to the high winds Installer keeps exe when I open a prog or restart the computer.  Thank you bill

  If your problems started with the updates, read this bit this bit of info on problem updated, I did:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Why do you always do the spinning wheel of death while trying to open a program CC?

  He ends by open or hold on and I have to try again.  Waaay sloooow - my CS5.5 is better - what's the problem?  With the help of Mac OS X Lion and I have a lot of memory.

  Everyone knows about this problem? -I don't have time to wait several minutes for a program to open.

  Hi bludetailsdesigns,

  You can try these & check.

  1. If the internet is very good that so maybe it's becase of files cloud creatives, please try the steps here described in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g - cc.html and see if it works.

  2. Please navigate to ~/Library/Application Support/Adobe/OOBE/opm.db and trash. Try running the CC Office and sign in with your Adobe (iles.html http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f) ID.

  {Step 2 note: the file is located in the user's library, not the Applications folder.} To see hidden user library (not the library system) in the Finder , click on the item of menu go , then hold the Alt / Option key. You will see library appear between the House and the computer. Clicklibrary , and then navigate to Application Support > Adobe > OOBE.

  You can also open the Terminal and paste later and then press entry / back :

  {RM ~/Library/Application\ Support/Adobe/OOBE/opm.db, this will also remove the file}

  Hope it works.

  Kind regards

  Baudier

• PlibRCodec.dll message when trying to open webcam programs

  libRCodec.dll! message when I try to open the new Webcam. It is said that I didn't do it.

  Hello

   

  1. What is the exact full error message?

  2 were there any hardware or software changes made on the computer before this problem?

  3. what operating system are you using on your computer?

   

  I suggest you put the computer in a clean boot state, and then try to open the Webcam and check if that helps. Help with error messages and other issues; You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Answer comes back with more information so that we can better help you.

• Recently loaded a tax program and I get an error message (HR Block has stopped working) trying to open the program.

  Disk load and got the habit successfully installed. Click the icon to open and get the program has stopped working. Removed and reinstalled, but get the same results.

  Hi Nerraw,

  If you are able to access the program from another user, then your user account is damaged. You must follow the steps in the following article to resolve the corrupted user account.

  Difficulty of a corrupted user profile

• I am trying to open a program on CD rom. I even installed on my computer, but it does not open!

  What do I get when I click on my program:

  The procedure entry point? _xfunc@TR1@STD@@YAXXZ is not found in the MSVCP90.d11 dynamic link library

  Hi JoAnne Johnson,

  I suggest you try the following steps.

  Method 1 - execute a System File Checker tool.

  See this link for more information about the System File Checker tool.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  If the System File Checker is no help, perform a clean boot.

  Method 2: Run the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• PhotoShop Elements 9 crashes with trying to open the program.

  Hello

  I installed Photoshop Elements 9 and had problems with the security code.  Case No. 0212257523, I am using one of your technitions.  He took the serial number and installed but it freezes when ever I try and open it.

  Larry

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-system-errors-freezes-Photoshop. HTML

• my computer wants to be constantly trying to install a program

  the source of use seems to be "C:\DOCUME~1\Chuck\LOCALS~1\Temp\7zS3105\setup\SmartWebPrinting\".

  any help?

  Hi, ConfusedF22,

  Try the Fixit found here:

  Compatibility issues with HP Smart Web Printing and Internet Explorer

  http://support.Microsoft.com/kb/969227

• All programs are now trying to open with WORD.

  Model HP laptop G56. Windows 7-64 bit. After inadvertently pressing the WORD by trying to open the Cubase 5 music program (after asking what program I want to open Cubase with) all the program on the desktop icons now appear as the letter W and the computer tries to not open in WORD now, which is impossible so no open programs. How I can fix this and restore the situation so that each program, i.e., Cubase, Excel and all the rest opens just in its own right? I tried to remedy this by the OPEN WITH menu, but it shows just a few programs and no way to repair my error.

  Hello:

  If it has not been produced for a long time, I just use the system restore utility and choose a restore point for awhile before you tried to open the program with Word.

  If you are not familiar with this utility, please read the link below on how to use it.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Paul

• When I try to open a program on my hard drive it opens in a tiny window, and I don't see anything that he. Help?

  This is an installation for my msi video card disc

  Hello

  1. are you able to open other programs very well?

  2 have you made any changes to the computer before the show?

  3 have you tried to maximize the window?

   

  Method 1: Try to expand the window and see if that helps.

   

  Method 2: Try to open the program face the files on the hard drive and see if that helps.

  See the following steps:

  (a) create a folder on the desktop

  (b) open the DVD player, copy the files from the DVD

  (c) paste the files in the folder

  (d) tries to open the program from the desktop folder and see if it opens fine.