Ethernet network Officejet Pro L7555 printer-perfect on one but feel problems with others

Similar Questions

• Scan to network Officejet Pro L7580 printer

  The printer does not recognize my computer on the network.  I can't use the analysis feature.  Windows recognizes the scanner exists but the HP software does not work.

  I need this job.  I called customer support several times, sitting for hours on the Chat support, uninstalled and reinstalled the software and all without success.

  I'm using an Intel computer dedicated, i.e.:

  Intel DP35DP Board

  CPU Intel 2 2.20 gig

  2 GB of ram

  Printer # is MY76C5212V

  MS Windows XP SP3

  I've been round and round with HP support on that.  There must be some conflicts of software on my machine.  Can you provide a list of known conflicts in order to run through my software and solve the problem.

  I might add that the other computers in the House are recognized by the printer.  The Vista machine does best with it.  I don't want to use the work around to do this, i.e. through the IE interface.  It is a bit expensive and unnecessary, method producing bad results regarding the scan image is concerned.  I need to scan photos and documents for commercial purposes.

  Please do some research and provide me with real and tangable help on that.

  O.K.  Here is what is the solution.  Are you ready?  Using all of your comments, combined with an Internet search for my problem, the solution lies in the trigger port and shipping.  Firstly, ICF must be set to allow "Host-name of the printer" port 9100.  Then, my Linksys router must be configured to allow the "printer name" transfer via port UDP and TCP port 9100.  Since all my computers are set to automatically receive IP, the printer must be set as such.

  Restart the computer.  Install the package of software and as if by magic, all is well in the office.

  So, the problem is not the software as much as it is in the installation and management of the network.  But, HP IT guys need to learn some of this stuff, so they can be better assistance in the future.

  Message edited by Hfefloors on 06/01/2009 15:14

• HP Officejet Pro L7650: PCL 6 driver for HP Officejet Pro L7650 printer all in one

  I have an old HP Officejet Pro L7650 all in one and due to new software that I use for my small business, I was told that I must download PCL6/drivers for my printer to work with the new software correctly. I searched and found the right driver online and downloaded, however, during installation to choose the machine and it lists just about everyone but the machines HP Officejet Pro L7650. I was wondering if anyone has an idea or knows a PCL 6 driver that will work for my particular all in one machine. Any help is appreciated. The driver I downloaded was the HP Universal print for 64-bit systems driver specifically (upd-pcl6 - x 64 - 6.0.0.18849). Thank you.

  According to the specifications of the charges (see http://support.hp.com/gb-en/document/c00839084 ) and in common with many (but not all) peripheral inket printers OfficeJet L7650 use the Language of Description of Page PCL3 Enhanced - they do not support PCL5 or PCL6.

• OfficeJet Pro L7580 printer all in one

  I recently downloaded the HP Officejet Pro full features (Version 14.0.0) software to my computer HP windows Vista (32 bit) and now I'm my files scanned problems - they disappear after scanning with the HP Solution Center that is installed with the new software.  I have read several posts and tried their solutions but also download all the patches available on the HP website, but whenever I try to install the patch I get a box pop up that tells me that I have not all installed components that need the fix.

  Does anyone know a solution to the 14 software version?

  Hello

  Please try follows him and check any changes:

  1. Make sure that the HP Solution Center is closed.
  2. Enter C:\Program HP Imaging\bin and locate the file hpqxmlul.dll .
  3. Move this file to a temporary folder elsewhere as your office, just to backup porpuses.
  4. Download and save the following file to your desktop, remove it by double-clicking, a new hpqxmlul.dll file appears on your desktop.
  5. Move this file into C:\Program HP Imaging\bin.

  Now, launch the HP Solution Center and try scanning.

  Please let me know of any changes,

  Shlomi

• Officejet Pro L7555 printer

  My printer prints pink when it should be blue. I deleted the drives and reinstalled. I changed all the ink cartridges. In addition, even if the printer will print, when I try the solution Center, it tells me that it is not connected to my computer.

  Ok. Let me know what happens when the new printhead is available in.

  It may have simply been damaged.

• HP officejet pro 8600 prints the document around, but on any OTHER page

  Please see above the subject.

  Printer preferences changed.

  Five test pages print.

  It worked. No blank pages of morse.

  What now? Let set to the "BEST?"

• Officejet Pro L7555 replacement ink cartridges

  I have a HP Officejet Pro L7555 printer.  It uses HP 88XL size printer cartridges, but lately, I haven't seen this size of cartridge in my local stores.  The 88XL has been replaced and this is the new model of cartridge No. ?

  Hey 2davidc8,

  To get a HP 88XL cartridges to print to your printer, I can't say as to why the cartridge is not available in your local stores. I don't see that the cartridges are still available at HP Shopping.

  Kind regards.

• OfficeJet Pro 8600: Printer offline and HP Support for Windows 10 don't come upward

  I'm trying to scan pictures to my computer.  Have upgraded to windows 10. My printer is connected wifi.  I bring the printer in Control Panel, set up my printer and it says printer is offline.  Indications are no good they do not appear to be implemented for users windows 10. When I try to go to the hp support for windows 10, I have just a white screen.  I am very frustrated.  I can print to the printer, but he won't let me not scan to the computer, and that's what I need.

  Hi @Procats,

  Welcome to the HP Forums!

  I understand that you cannot scan on Windows 10, with your HP Officejet Pro 8600 printer. I'm happy to discuss this issue scan for you!

  Please, try the following steps:

  Check the connection of the printer on the network and troubleshoot any problems with the printer, router, installation or connection.

• OfficeJet pro 8000: Officejet pro 8000 prints the part of the document

  Have a problem with both networking Officejet pro 8000's. If you print a paginated document 4, printing two pages and stops, then 2 minutes he feeds a white sheet of paper in the printer, the printer hangs then error light on, who need to power cycle to restart. The network is in a school, unused printers for a few weeks, before now, they both work as it should.

  This problem is with a laptop with free Wi - Fi. However, even 4-page document sent to another that officejet pro 8000 prints as it should, and prints as it should when sent to a photocopier.

  The network of small schools there are ten computers wired to office, after trying to print from one of them, the same problem occurs with 2 of 4 pages printing, then a white sheet, then the printer hangs. This desktop computer will also print the same document on the photocopier without problem.

  Not very well where to go with this, help please!

  Problem solved, simply wanted the new cartridges!, but what I do not understand why the part of a document of four pages would be absolutely fine print, all the colors print as they should, then stop and hang. Power cycle printer, exactly the same result. Exactly the same on both 8000 printers?

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8630: HP Officejet Pro 8630 printing problem

  Hello

  I have a printer HP OfficeJet Pro 8630 with two different computers connected on it. I have no problem printing from the computer that I use every day, but when I try to print from the other office, nothing happens. The second recognizes the printer and says it is connected, but it does not recognize the printer. In the meantime, I can turn around and print something on the computer to work immediately after I try to print on the other. If anyone has any suggestions, I would be very happy! Thank you.

  Hi @AdminGuy,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you have a HP Officejet Pro 8630 e-all-in-one printer is connected to two computers via a wireless network, the main one has no problem printing, but the printer is not responding to print jobs sent from the second PC. I would like to help with that.

  Is the PC that does not work with the printer to Apple or Windows computer, and what operating system is running?

  If it's a Windows PC, try to download and run the HP print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  Please get back to me if you want.

  If it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

• HP Officejet Pro 8610: Problems for install HP Officejet Pro 8610 e-all-in-one printer on Windows 10

  We have a HP Officejet Pro 8610 e-all-in-one printer that is connected to the network.

  The printer is installed and can print successfully from 3 desktop with Windows OS 10.

  4 desktop pc with Windows 10 is not able to install the printer drivers.

  When addind printer with device to add the printer is recognized and installed, but only the driver scanner.

  We have tried to remove the printer some time but without success.

  Also, we tried using various HP and Assistant tools, but these tools can not install the printer driver.

  Adding the printer manual, also don't do not install us the printer driver.

  The only driver installed is the scanner.

  We are out of ideas, you can help us with all the great ideas.

  Sincerely,.

  Gilbert

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

  I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

  What happens and how can I solve this problem?

  Hi TM1997,

  Thanks for the reply!

  Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

  Have a great weekend!

• iPhone to HP Officejet Pro L7555

  Is it possible possible to print from an iPhone to an Officejet Pro L7555; Maybe a firmware update?

  The printer listed does not support ePrint.  A workaround that you can try is the Hp ePrint app.

  I included a link to the app.

  HP ePrint app.

  Let me know how it goes.

• Correct ink cartridge HP Officejet Pro L7555 - was 88XL; can I use 940XL?

  The HP Officejet Pro 7500 series seems to require the HP 88XL ink cartridges, but these are not well highlighted these days.  The 840XL works in the 8000 series and these machines seem almost identical to the 7555 I.  The 840XL works instead of the HP 88XL?  What is the difference between these anyway?

  Thanks for any light you can throw on this issue.

  HP Officejet Pro L7555 requires ink HP 88 is correct. These are not well highlighted these days; is not true. You can always shop online at http://shopping2.hp.com/en_US/home-office/-/search-SimpleOfferSearch?PageSize=15&search=&SearchTerm=HP+88 for the HP 88 ink.

  It's the HP 940 ink that works in HP Officejet Pro 8000/8500 series printers.

  The HP L7555 and Pro 8000 may seem identical in some aspects, but not all because many features are added in the new printers. Even ink the printer technology is updated.

  The two sweepers in discussion mechanism different ink and so HP 940 work nto on both.

  Inkology HP: http://www.youtube.com/watch?v=dIF_myynUlc

  I hope this helps.

  I work for HP but my messages and responses are mine.

  Have a great day!

  Michael. If you like this post, click on Bravo.