Cannot access Ethernet network

Similar Questions

• Cannot access the network ERR_NETWORK_ACCESS_DENIED

  I have Windows 7.  Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).

  Cannot access the network

  ERR_NETWORK_ACCESS_DENIED
  Google Chrome has access to the network.

  Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.

  Chrome allow access to the network in your firewall or anti-virus settings.

  If it is already listed as a program allowed to access the network, try to remove from the list and Add again.

  I tried the above, but can't seem to solve the problem.  Thank you.

  Hello Paul,

  Thanks for posting your question on the Microsoft Community.

  I would like to know some information about the problem so that we can help you better.

  The same problem occurs when you use Internet explorer?

  Thank you for details on the question and your efforts to resolve.

  If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
  Reference:
  Can't access some Web sites in Internet Explorer
  https://support.Microsoft.com/en-us/KB/967897

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also see this article:
  Understanding Windows Firewall settings
  http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7

  Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.

  To get help on Google chrome, I suggest you post your question on Google chrome forums.
  http://productforums.Google.com/d/Forum/chrome

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Cannot access the network - Get unspecified error 0 x 80004005

  Hi all

  I have a strange problem that I hope someone can help me with.

  I have a PC Windows Vista Ultimate, newly installed, all the patches applied. Any other installed apps don't except MS Office.

  Not my problem, I have a NAS drive on my network and can be accessed by different machines on my network (IE. \\NAS)

  However for some reason any my Vista machine has ceased to recognize this. Now I can only connect via an IP address (IE. ( \\192.168.0.2).

  Whenever I have try type \\NAS he says "Windows cannot access \\NAS... etc etc" with a "unspecified error 0 error Code 80004005 x.

  He used to work, but now it does which is very weird. When I click on diagnose says that it cannot find \\NAS. However, as this network drive has a web front end, when I type its IP address there is no problem at all and I can access it, but not through windows Explorer! I use a TP-Link wireless adapter. I have a LAN connector normal that I disabled and enabled with no effect (although I have not physically connected them)

  I can navigate to Windwos Vista machine to it seems to work very well.

  Any ideas?

  Thanks in advance.

  Neal.

  If the regular way, you connect a reader could not be used and that you were forced to connect by ip, get error 80004005 would make sense, because it means that the rights or false refused/insufficient access permissions. Your network can have a parameter saying denied access by ip address, so either you might find this setting, or find a way to solve the original problem, making it impossible to connect as normal to you.

  I would check the firewalls, because your firewall or the firewall of the NAS could have been changed to not connect to the NAS or do not allow you to connect, respectively.

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Cannot access the network without password drives?

  I had a failure of hard drive on my laptop and I can't access my network of resources to work after installing the new drive.  A dialog box opens for a username and password when I try to map a network drive.  No other computer in fact.  Vista is the problem, but what is the solution?

  You must create an identical user account and password on your Vista machine that corresponds to the remote computer. The error you get indicates that you did not do this. MS - MVP - Elephant Boy computers - don't panic!

• Cannot access internal network so AnyConnect SSL VPN, ASA 9.1 (6)

  Hello Cisco community support,

  I have a lab which consists of two virtual environments connected to a 3750-G switch that is connected to a 2901 router which is connected to an ASA 5512 - X which is connected to my ISP gateway. I configured SSL VPN using AnyConnect and can establish a VPN to the ASA from the outside but once connected, I can't access internal network resources or access the internet. My information network and ASA configuration is listed below. Thank you for any assistance you can offer.

  ISP network gateway: 10.1.10.0/24

  ASA to the router network: 10.1.40.0/30

  Pool DHCP VPN: 10.1.30.0/24

  Network of the range: 10.1.20.0/24

  Development network: 10.1.10.0/24

  : Saved
  :
  : Serial number: FCH18477CPT
  : Material: ASA5512, 4096 MB RAM, CPU Clarkdale 2793 MHz, 1 CPU (2 cores)
  :
  ASA 6,0000 Version 1
  !
  hostname ctcndasa01
  activate bcn1WtX5vuf3YzS3 encrypted password
  names of
  cnd-vpn-dhcp-pool 10.1.30.1 mask - 255.255.255.0 IP local pool 10.1.30.200
  !
  interface GigabitEthernet0/0
  nameif inside
  security-level 100
  IP 10.1.40.1 255.255.255.252
  !
  interface GigabitEthernet0/1
  nameif outside
  security-level 0
  address IP X.X.X.237 255.255.255.248
  !
  interface GigabitEthernet0/2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa916-1-smp - k8.bin
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_10.1.30.0_24 object
  10.1.30.0 subnet 255.255.255.0
  network obj_any object
  network obj_10.1.40.0 object
  10.1.40.0 subnet 255.255.255.0
  network obj_10.1.30.0 object
  10.1.30.0 subnet 255.255.255.0
  outside_access_in list extended access permitted ip object NETWORK_OBJ_10.1.30.0_24 all
  FREE access-list extended ip 10.1.40.0 NAT allow 255.255.255.0 10.1.30.0 255.255.255.0
  access-list 101 extended allow any4 any4-answer icmp echo
  access-list standard split allow 10.1.40.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ICMP allow any inside
  ICMP allow all outside
  ASDM image disk0: / asdm - 743.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) source obj_10.1.40.0 destination obj_10.1.40.0 static static obj_10.1.30.0 obj_10.1.30.0 non-proxy-arp-search to itinerary
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_10.1.30.0_24 NETWORK_OBJ_10.1.30.0_24 non-proxy-arp-search to itinerary
  Access-group outside_access_in in interface outside
  !
  Router eigrp 1
  Network 10.1.10.0 255.255.255.0
  Network 10.1.20.0 255.255.255.0
  Network 10.1.30.0 255.255.255.0
  Network 10.1.40.0 255.255.255.252
  !
  Route outside 0.0.0.0 0.0.0.0 10.1.10.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  without activating the user identity
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 management
  http 192.168.1.0 255.255.255.0 inside
  http X.X.X.238 255.255.255.255 outside
  No snmp server location
  No snmp Server contact
  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
  registration auto
  full domain name no
  name of the object CN = 10.1.30.254, CN = ctcndasa01
  ASDM_LAUNCHER key pair
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
  certificate c902a155
  308201cd 30820136 a0030201 020204c 0d06092a 864886f7 0d 010105 9 02a 15530
  0500302b 31133011 06035504 03130 has 63 61736130 31311430 12060355 74636e64
  0403130 31302e31 2e33302e 32353430 1e170d31 35303731 32303530 3133315a b
  170d 3235 30373039 30353031 33315 has 30 2 b 311330 0403130a 11060355 6374636e
  64617361 30313114 30120603 55040313 0b31302e 312e3330 2e323534 30819f30
  0d06092a 864886f7 010101 05000381 8 d 0d 003081 89028181 00a47cfc 6b5f8b9e
  9b106ad6 857ec34c 01028f71 d35fb7b5 6a61ea33 569fefca 3791657f eeee91f2
  705ab2ea 09207c4f dfbbc18a 749b19ae d3ca8aa7 3370510b a5a96fd4 f9e06332
  4355 db1a4b88 475f96a1 318f7031 40668a4d afa44384 819d fa164c05 2e586ccc
  3ea59b78 5976f685 2abbdcf6 f3b448e5 30aa96a8 1ed4e178 0001300 020301 4 d d
  06092a 86 01010505 00038181 0093656f 639e138e 90b69e66 b50190fc 4886f70d
  42d9b4a8 11828da4 e0765d9c 52d84f8b 8e70747e e760de88 c43dc5eb 1808bd0f
  fd2230c1 53f68ea1 00f3e956 97eb313e 26cc49d7 25b927b5 43d8d3fa f212fcaf
  59eb8104 98e3a1d9 e05d3bcb 428cd7c6 61b530f5 fe193d15 ef8c7f08 37ad16f5
  d8966b50 917a88bb f4f30d82 6f8b58ba 61
  quit smoking
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  VPN-addr-assign local reuse / 360 time
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  Trust ASDM_Launcher_Access_TrustPoint_0 vpnlb-ip SSL-point
  SSL-trust outside ASDM_Launcher_Access_TrustPoint_0 point
  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-linux-3.1.09013-k9.pkg 4
  AnyConnect image disk0:/anyconnect-macosx-i386-3.1.09013-k9.pkg 5
  AnyConnect image disk0:/anyconnect-win-3.1.09013-k9.pkg 6
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_cnd-vpn group policy
  GroupPolicy_cnd-vpn group policy attributes
  WINS server no
  value of server DNS 8.8.8.8
  client ssl-VPN-tunnel-Protocol
  by default no
  xxxx GCOh1bma8K1tKZHa username encrypted password
  type tunnel-group cnd - vpn remote access
  tunnel-group global cnd-vpn-attributes
  address-cnd-vpn-dhcp-pool
  strategy-group-by default GroupPolicy_cnd-vpn
  tunnel-group cnd - vpn webvpn-attributes
  activation of the alias group cnd - vpn
  !
  ICMP-class class-map
  match default-inspection-traffic
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map icmp_policy
  icmp category
  inspect the icmp
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  inspect the icmp
  !
  global service-policy global_policy
  service-policy icmp_policy outside interface
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:261228832f3b57983bcc2b4ed5a8a9d0
  : end
  ASDM image disk0: / asdm - 743.bin
  don't allow no asdm history

  Can you confirm that this is correct, your diagram shows your IP address public on ASA as 30 while you have assinged on 'outside' interface like 29?

• Cannot access the network using WiFi hotspot

  I have a lenovo ideapad z570 running windows 7 ultimate, processor intel pentium cpu B950 @2.10 GHZ 2 GB ram and 64-bit operating system. My problem is that when I create a wifi hotspot via intel my wifi technology, I so can not access the network on my android phone or the playstation 3. There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Original title: network
  

  There is a sign yellow triangle on the wireless icon and I have the cursor on it, she reads, access to the internet network, unidentified network no internet access. I tried to update all the drivers, I even reinstalled the operating system after a wipe, same result. I tried to use programs such as connectify but same result. Please help me

  Hello

  You try to use the Add-hock network so that you can access ac in android are as good as play station unit
  Like you would have checked in the id network properties material and device id, it yellow list means problem with driver, please try to update the BIOS and the driver appropriate with the hardware ID, if possible to install from the laptop power management

  IdeaPad Z570.please press fn + f5 and check the layout state of WIFI is turned on, current state should off
  Download these drivers and install it, then try again
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1WLN90WW5.exe

  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z370Z470/IN8STW09WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1MEI08WW5.exe
  http://download.Lenovo.com/userfiles/Driver/en/downloads%20and%20Drivers/Z570/Win7/IN1CHP30WW5.exe

• Cannot access the network drive after trying to change the shared folder.

  I had a 80 GB drive connected to my E3000 for a few years and it worked without problem. I recently turned to a 250 GB Maxtor One Touch drive. When I plugged it, the router automatically creates a shared folder. I was able to connect to this folder without problem, but I wanted to share the whole score. When I made this adjustment and tried to save the settings, I temporarily lost access to the router. He gave me the standard page cannot be error message appears. When I got access changes seem to be made. When I try to access the drive of my laptop I get this error message, "the mapped network drive could be created", "the name specified network is no longer available". I rebooted and power rolled my router as well reconnected the drive.

  I think that since you have replaced your hard drive, old settings are configured may still on the hard drive of old. You can change the users and group so that it syncs with the new hard drive or start from scratch (reformat the hard drive).

• Cannot access the network after you have installed the Windows updates

  original title: Windows update and Acer Aspire M3201

  Hi, I have a problem with my Acer Aspire M3201, which has Windows Vista on it. The system has installed the Windows Update automatically, so I can't access the internet and home network more. So I restored the previous update windows, then I can get into the internet again. A week later the update windows again but this time somehow corrupted previous restoration, I cannot restore and can not enter in the internet. I bought Windows 7 to upgrade my Windows Vista computer. The upgrade went OK game, but it was also installed the updateautomatically, and I cannot yet access the internet web browser of screws, but the command, I can ping any web site as www.cisco.com. Please help me. Thank you.

  If you updated that could trigger it, you can do is to uninstall and avoid installing it by hiding the update in Windows Update.

  Click Start, type: see installed updates
  Press enter on your keyboard
  Look for the update in question, no it click on, then click on uninstall.

  Restart your computer

  Open Windows Update, select the update, right-click and click Hide

  See also: Troubleshoot network Windows 7 http://clkon.us/bJtkA0

• PIX - PIX VPN and Client VPN - cannot access core network

  I hub and spoke PIX and a VPN Client that connects to speak it PIX, much the same as the example configuration here: -.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00800948b8.shtml

  This example shows the client VPN access to the network behind PIX RADIUS. I want the client to also be able to access the central network, i.e. the client connects to the pix speaks via vpn, and traffic is routed through the vpn to PIX - PIX to the central site.

  How this would change the configuration contained in the example?

  See you soon,.

  Jon

  You can not do this, the PIX cannot route a package back on the same interface, it is entered in the. The only way to do that is to have the client connect to the hub PIX, but then they would not be able to get to the network behind PIX distance either.

  Or that the customer would connect on a different interface in the PIX of distance, but this would mean another connection ISP on this PIX. Example of config is here: http://www.cisco.com/warp/public/110/client-pixhub.html

• Cannot access my network after I have reset my router

  HI, I recently tried to reset my default router and I followed the procedure to reset after doing so, my network says it is safe and I need to enter a password to access what I don't know. unless I conect to the router I can't access the web portal to change the seetings of my router, I have no idea what to do someone help me on this issue.

  Kind regards.

  Use the default settings... they are on the label of the router

• WebVPN cannot access internal network on 2821

  Hello, I'm trying to configure WebVPN to my internal network. The client is connected to the router, but I can't ping from my internal network. Also, I've lost ping between hosts on the internal network. I can ping only gateway (192.168.162.0)

  IOS Version 15.1 (4) M9

  webvpn-pool IP local pool 192.168.162.212 192.168.162.218

  IP nat inside source list 1 interface GigabitEthernet0/0 overload

  access-list 1 permit 192.168.162.0 0.0.0.255

  Gateway Gateway-WebVPN-Cisco WebVPN
  address IP X.X.X.X port 1025
  SSL rc4 - md5 encryption
  SSL trustpoint trustpoint-my
  development
  !
  WebVPN context Cisco WebVPN
  Easy VPN title. "
  SSL authentication check all
  !
  list of URLS "rewrite".
  !
  ACL "ssl - acl.
  allow IP 192.168.162.0 255.255.255.0 192.168.162.0 255.255.255.0
  !
  login message "Cisco Secure WebVPN"
  !
  webvpnpolicy political group
  functions compatible svc
  functions required svc
  filter tunnel ssl - acl
  SVC-pool of addresses 'webvpn-pool' netmask 255.255.255.0
  generate a new key SVC new-tunnel method
  SVC split include 192.168.162.0 255.255.255.0
  Group Policy - by default-webvpnpolicy
  AAA authentication list sslvpn
  Gateway Cisco WebVPN bridge
  Max-users 2
  development
  !

  Hello

  I saw the VPN configuration:

  webvpnpolicy political group
  functions compatible svc
  functions required svc
  filter tunnel ssl - acl
  SVC-pool of addresses 'webvpn-pool' netmask 255.255.255.0
  generate a new key SVC new-tunnel method
  SVC split include 192.168.162.0 255.255.255.0
  Group Policy - by default-webvpnpolicy
  AAA authentication list sslvpn
  Gateway Cisco WebVPN bridge
  Max-users 2
  development

  ACL "ssl - acl.
  allow IP 192.168.162.0 255.255.255.0 192.168.162.0 255.255.255.0

  webvpn-pool IP local pool 192.168.162.212 192.168.162.218

  IP nat inside source list 1 interface GigabitEthernet0/0 overload

  access-list 1 permit 192.168.162.0 0.0.0.255

  I recommend the following:

  1 use a local IP pool with a different range that is used in the internal network (routing wise issues)

  2. removed the VPN filter, it is completely useless, since it's the same for which the (Split tunnel is):

  webvpnpolicy political group

  no tunnel ssl - acl filter

  3 use an ACL on the NAT and create the NAT exemption for the network to the IP pool inside local outdoors:

  NAT extended IP access list

  deny ip 192.168.162.0 0.0.0.255 XXXX XXXXX--> network IP of the IP pool

  Licensing ip 192.168.0.0 0.0.0.255 any

  IOverload nat inside source list NAT interface GigabitEthernet0/0 p

  What are the appropriate changes, I recommend you to apply.

  Please don't forget to rate and score as correct the helpful post!

  David Castro,

• Windows 2003 cannot access remote network via Cisco VPN

  I have two computers at home, an XP Pro SP2 and another is Windows 2003 server SP1. If I set Cisco VPN XP (version 4.6) the Office (ASA 5510), I can access the office network resources. However, if I set the Cisco VPN on 2003, can I? t do the same thing. After studying the two routing tables, I think XP has this road: 192.168.0.0 255.255.0.0 192.168.101.5 192.168.101.5 1, but the 2003 doesn't? t. If I add this route manually (rou? add 192.168.0.0 mask 255.255.255.0 192.168.101.3) 2003, then I can access resources. Why?

  tale of 2003 routing.

  Active routes:

  Network Destination gateway metric Interface subnet mask

  0.0.0.0 0.0.0.0 192.168.10.1 192.168.10.3 40

  x.x.x.37 255.255.255.255 192.168.10.1 192.168.10.3 1

  127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1

  192.168.10.0 255.255.255.0 192.168.10.3 192.168.10.3 40

  192.168.10.3 255.255.255.255 127.0.0.1 127.0.0.1 40

  192.168.10.255 255.255.255.255 192.168.10.3 192.168.10.3 40

  192.168.101.0 255.255.255.0 192.168.101.3 192.168.101.3 10

  192.168.101.3 255.255.255.255 127.0.0.1 127.0.0.1 10

  192.168.101.255 255.255.255.255 192.168.101.3 192.168.101.3 10

  224.0.0.0 240.0.0.0 192.168.10.3 192.168.10.3 40

  224.0.0.0 240.0.0.0 192.168.101.3 192.168.101.3 10

  255.255.255.255 255.255.255.255 192.168.10.3 192.168.10.3 1

  255.255.255.255 255.255.255.255 192.168.101.3 192.168.101.3 1

  Default gateway: 192.168.10.1

  ===========================================================================

  Persistent routes:

  None

  VPN client has not been tested on Win2003. Customer requirements are described here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/client/4_6/relnt/4604cln.htm#wp1024664

  and the show to competition of WinXP is supported.

• Cannot access remote network via VPN

  Hello

  I'm trying to set up a router vpn access to my office network. The router is connected to the Internet through using pppoe vdsl.
  There is also a public oriented Web server in the office which must be accessible.

  I can access the Web server from the Internet and the vpn connects successfully. I can also ping the LAN Gateway, however, I can't access all the local machines.

  I'm quite puzzled as to why it does not work. Please could someone help.

  The results of tests and the router configuration are listed below. Please let me know if you need additional information.

  Thank you and best regards,
  Simon

  1. routing on the router table
  Router #sh ip route
  Gateway of last resort is ggg.hhh.125.34 to network 0.0.0.0
  xxx.yyy.zzz.0/29 is divided into subnets, subnets 1
  C XXX.yyy.zzz.192 is directly connected, Vlan10
  GGG.hhh.125.0/32 is divided into subnets, subnets 1
  C GGG.HHH.125.34 is directly connected, Dialer0
  172.16.0.0/32 is divided into subnets, subnets 1
  S 172.16.100.50 [1/0] via mmm.nnn.ppp.sss
  S * 0.0.0.0/0 [1/0] via ggg.hhh.125.34

  2. ping PC remotely (172.16.100.50) local GW (172.16.100.1) successful
  > ping 172.16.100.1
  Ping 172.16.100.1 with 32 bytes of data:
  Response to 172.16.100.1: bytes = 32 time = 24ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 10ms TTL = 255
  Response to 172.16.100.1: bytes = 32 time = 11ms TTL = 255

  3. ping PC remotely (172.16.100.50) to the local server (172.16.100.10) failure
  > ping 172.16.100.10
  Ping 172.16.100.10 with 32 bytes of data:
  Request timed out.
  Request timed out.
  Request timed out.
  Request timed out.

  4. ping the router to the successful local server
  router #ping 172.16.100.10
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 172.16.100.10, wait time is 2 seconds:
  !!!!!
  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/4 ms

  5 see the version
  Cisco IOS software, software of C181X (C181X-ADVIPSERVICESK9-M), Version 12.4 (15) T1, VERSION of the SOFTWARE (fc2)
  ROM: System Bootstrap, Version 12.3 YH6 (8r), RELEASE SOFTWARE (fc1)
  the availability of router is 1 hour, 9 minutes
  System image file is "flash: c181x-advipservicesk9 - mz.124 - 15.T1.bin".
  Cisco 1812-J (MPC8500) processor (revision 0 x 300) with 118784K / 12288K bytes of memory.
  10 FastEthernet interfaces
  1 ISDN basic rate interface
  Configuration register is 0 x 2102

  6. router Config
  AAA authentication login default local
  connection of local AAA VPN authentication.
  AAA authorization exec default local
  local authorization AAA VPN network
  !
  !
  AAA - the id of the joint session
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  Configuration group customer isakmp crypto ASI_Group
  key mykey
  DNS aaa.bbb.cccc.ddd
  domain mydomain.com
  pool VPN_Pool
  ACL VPN_ACL
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TS1
  !
  crypto dynamic-map 10 DYNMAP
  game of transformation-TS1
  market arriere-route
  !
  !
  list of authentication of VPN client VPN crypto card
  card crypto VPN VPN isakmp authorization list
  crypto map VPN client configuration address respond
  card crypto 10 VPN ipsec-isakmp dynamic DYNMAP
  !
  !
  !
  IP cef
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  username admin privilege 15 password mypassword
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  interface FastEthernet0
  WAN description
  no ip address
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  automatic duplex
  automatic speed
  PPPoE enable global group
  PPPoE-client dial-pool-number 1
  !
  interface FastEthernet2
  Description Public_LAN_Interface
  switchport access vlan 10
  full duplex
  Speed 100
  !
  FastEthernet6 interface
  Description Private_LAN_Interface
  switchport access vlan 100
  full duplex
  Speed 100
  !
  interface Vlan1
  no ip address
  !
  interface Vlan10
  Public description
  IP address xxx.yyy.zzz.193 255.255.255.248
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  !
  interface Vlan100
  172.16.100.1 IP address 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  no ip mroute-cache
  !
  interface Dialer0
  IP unnumbered Vlan10
  no ip unreachable
  IP mtu 1452
  IP virtual-reassembly
  encapsulation ppp
  no ip mroute-cache
  Dialer pool 1
  Dialer-Group 1
  Authentication callin PPP chap Protocol
  PPP chap hostname myhostname
  PPP chap password mychappassword
  PPP ipcp dns request accept
  failure to track PPP ipcp
  PPP ipcp address accept
  VPN crypto card
  !
  IP pool local VPN_Pool 172.16.100.50 172.16.100.60
  !
  !
  no ip address of the http server
  no ip http secure server
  !
  VPN_ACL extended IP access list
  IP 172.16.100.0 allow 0.0.0.255 any
  !
  Dialer-list 1 ip protocol allow
  not run cdp
  !
  !

  Simon,

  Basically when you connect through a VPN Client PC routing table is updated automatically as soon as the connection is established. If you do not need to manually add routes. You can check this by doing a "route print" once you are connected.

  Ideally, you need to put your pool of VPN on subnet that does not exist on your physical network, the router would be to route traffic between the IP pool and internal subnet.

  Now, you said that you have a web server with a public IP address that you need to access through the VPN, that host also as a private IP addresses on the 172.16.100.0? If it isn't then the ACL that I proposed should work. If she only has a public IP then your ACL VPN address must have something like

  IP 172.16.100.0 allow 0.0.0.255 192.168.100.0 0.0.0.255

  219.xxx.yyy.192 ip 0.0.0.7 permit 192.168.100.0 0.0.0.255

  Who says the router and the client to encrypt all traffic between the subnets behind your router and your VPN pool.

  I hope this helps.

  Luis Raga

• EZ - VPN Cisco cannot access internal network

  Hello

  I configured an EZ - VPN on my router, but after a login successful in the VPN, I can't ping my internal network or access all the resources. Also, I can't ping my router VPN Client IP address.

  Can someone take a look at my Config?

  Here is my config:

  Current configuration: 7730 bytes

  !

  ! Last configuration change at 16:24:55 UTC Tuesday, June 14, 2011 by suncci

  ! NVRAM config update at 20:21:30 UTC Friday, June 10, 2011 by suncci

  !

  version 12.4

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  router host name

  !

  boot-start-marker

  boot-end-marker

  !

  no set record in buffered memory

  no console logging

  !

  AAA new-model

  !

  !

  AAA authentication login default local

  local AUTH_VPN AAA authentication login

  AAA authorization exec default local

  local AUTHORIZE_VPN AAA authorization network

  !

  !

  AAA - the id of the joint session

  IP cef

  !

  !

  !

  !

  name-server IP 208.67.222.222

  name of the IP-server 205.188.146.145

  !

  Authenticated MultiLink bundle-name Panel

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  !

  Crypto pki trustpoint TP-self-signed-1861908046

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 1861908046

  revocation checking no

  rsakeypair TP-self-signed-1861908046

  !

  !

  TP-self-signed-1861908046 crypto pki certificate chain

  certificate self-signed 01

  3082023E 308201A 7 A0030201 02020101 300 D 0609 2A 864886 F70D0101 04050030

  2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30

  69666963 31383631 39303830 6174652D 3436301E 170 3032 30333031 30313431

  30365A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D

  4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 38363139 65642D

  30383034 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101

  8100AD30 FB88278D F9010218 AD58E479 21C00A39 76974 HAS 87 DF43C948 D56E65CC

  98F484A1 1F5BA429 449E416F B3C5729C 78598186 8873 HAS 168 DB9EEAAA B0521523

  C8011877 14888C9A 193E43E3 C3575491 74A940A2 B2970549 FE436E4A 4DA6FB23

  C 21, 20110 0CD3A8F6 32EAD292 648F9E32 7EE6C86F 181FC3C2 8F91DA66 A3886F5C

  0203 010001A 3 66306430 1 130101 FF040530 030101FF 30110603 0F060355 467D

  1104 A 0, 300882 06526F75 74657230 551D 1 230418 30168014 FD800727 1F060355

  5FA9AD41 6EAE99B0 1EDA2735 C0DBBBCC 301D 0603 551D0E04 160414FD 8007275F

  A9AD416E AE99B01E DA2735C0 DBBBCC30 0D06092A 864886F7 0D 010104 05000381

  810076CE E5030E51 5BD6FE9F A8A42483 53E7D250 CDE09E87 6AD77195 09D225AF

  25858304 034D146B C4970C31 F6EF496B 7F57C772 7A1F0DFE 8A06B878 919AFD58

  212E475A 0346ADA6 D629BDFC AE58C42A 36D971D1 3BAB8541 EAC0AA10 919816A 1

  E22F5015 52086757 2171A4C7 6832C2BC 89ADEF72 95A81A51 0B888B1C 9EE9EE58 8E65

  quit smoking

  !

  !

  username privilege 15 password 0 xxxxx xxxxxx

  Archives

  The config log

  hidekeys

  !

  !

  crypto ISAKMP policy 1

  BA aes

  preshared authentication

  Group 2

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto nat keepalive 5

  !

  crypto ISAKMP client VPN-Sun-group configuration group

  key to 12345

  DNS 208.67.222.222

  pool VPN_Pool

  ACL VPN_Test

  Crypto isakmp ISAKMP_Profile_EZVPN profile

  Group of Sun-VPN-Group identity match

  list of authentication of client AUTH_VPN

  AUTHORIZE_VPN of ISAKMP authorization list.

  client configuration address respond

  Client configuration group Sun-VPN-Group

  virtual-model 1

  !

  !

  Crypto ipsec transform-set Sun-VPN aes - esp esp-sha-hmac

  !

  Profile of crypto ipsec IPSEC_Profile_EZVPN

  game of transformation-Sun-VPN

  ISAKMP_Profile_EZVPN Set isakmp-profile

  !

  !

  !

  !

  !

  !

  !

  !

  type of class-card inspect all internal match

  tcp protocol match

  udp Protocol game

  dns protocol game

  http protocol game

  https protocol game

  match icmp Protocol

  type of class-card inspect entire game Internet

  tcp protocol match

  udp Protocol game

  match icmp Protocol

  type of class-card inspect match, all the traffic-IntraNet-InterNet

  tcp protocol match

  udp Protocol game

  match icmp Protocol

  match the group-access InterNet-to-IntraNet-ACL name

  type of class-card inspect match, all the traffic-InterNet-IntraNet

  tcp protocol match

  udp Protocol game

  match icmp Protocol

  !

  !

  type of policy-card inspect InterNet-IntraNet-policy

  class type inspect traffic-IntraNet-InterNet

  inspect

  class class by default

  drop

  type of policy-card inspect IntraNet-InterNet-policy

  class type inspect traffic-InterNet-IntraNet

  inspect

  class class by default

  drop

  type of policy-card inspect sdm-policy-Internet

  class type inspect Internet

  inspect

  class class by default

  type of policy-card inspect internal sdm-policy

  class type inspect internal

  inspect

  class class by default

  drop

  !

  Security for the Internet zone

  security of the inner area

  the IntraNet zone security

  Description Interfaces all connected to the Intranet

  Security for the InterNet zone

  Description of all Interfaces connected to the Internet

  destination inner security zone-pair source sdm-zp-internal-self self

  type of service-strategy inspect sdm-policy-Internet

  zone-pair security IntraNet - InterNet source IntraNet InterNet destination

  type of service-strategy inspect IntraNet-InterNet-policy

  InterNet - IntraNet source InterNet destination IntraNet security zone-pair

  inspect the type of service-strategy InterNet-IntraNet-policy

  !

  !

  !

  !

  interface Loopback0

  IP 192.168.1.1 255.255.255.0

  !

  interface FastEthernet0/0

  Description external PPPOE Interface ETH - WAN$

  no ip address

  response to IP mask

  NAT outside IP

  IP virtual-reassembly

  automatic speed

  PPPoE enable global group

  PPPoE-client dial-pool-number 1

  No cdp enable

  !

  interface FastEthernet0/1

  switchport access vlan 10

  !

  interface FastEthernet0/2

  switchport access vlan 10

  !

  interface FastEthernet0/3

  switchport access vlan 10

  !

  interface FastEthernet0/4

  switchport access vlan 10

  !

  type of interface virtual-Template1 tunnel

  IP unnumbered Loopback0

  members of the IntraNet zone security

  source of Dialer1 tunnel

  ipv4 ipsec tunnel mode

  Tunnel IPSEC_Profile_EZVPN ipsec protection profile

  !

  interface Vlan10

  Description $FW_INSIDE$

  IP 192.168.0.3 255.255.255.0

  response to IP mask

  no ip redirection

  no ip unreachable

  IP nat inside

  IP virtual-reassembly

  members of the IntraNet zone security

  route IP cache flow

  !

  interface Dialer1

  Description $FW_OUTSIDE$

  the negotiated IP address

  no ip redirection

  no ip unreachable

  no ip proxy-arp

  IP mtu 1492

  NAT outside IP

  IP virtual-reassembly

  the Member's area InterNet security

  encapsulation ppp

  IP tcp adjust-mss 1452

  Dialer pool 1

  Dialer-Group 1

  No cdp enable

  PPP authentication chap callin pap

  PPP chap hostname pty/69733

  password PPP chap 0 DSLconnect

  PPP pap sent-username pty/69733 password 0 DSLconnect

  !

  IP pool local VPN_Pool 192.168.1.30 192.168.1.40

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 Dialer1

  IP route 192.168.1.0 255.255.255.0 Dialer1

  !

  !

  IP http server

  local IP http authentication

  IP http secure server

  IP nat inside source overload map route NAT interface Dialer1

  !

  InterNet-to-IntraNet-ACL extended IP access list

  permit tcp any 192.168.0.0 0.0.0.255

  allow udp all 192.168.0.0 0.0.0.255

  allow icmp any 192.168.0.0 0.0.0.255

  refuse an entire ip

  Internet extended IP access list

  Note Internet

  Remark SDM_ACL = 2 category

  Notice all THE

  allow a full tcp

  allow a udp

  allow icmp a whole

  allow an ip

  NAT extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 any

  deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  VPN_Test extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  !

  Remark SDM_ACL category of access list 1 = 2

  access-list 1 permit 192.168.0.0 0.0.0.255

  access-list 1 permit 192.168.1.0 0.0.0.255

  Note access-list 2 = 2 SDM_ACL category

  access-list 2 allow to 192.168.1.0 0.0.0.255

  access-list 5 permit one

  access-list 10 permit 192.168.0.0 0.0.0.255

  access-list 102 deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 102 permit ip 192.168.0.0 0.0.0.255 any

  not run cdp

  !

  !

  !

  route NAT allowed 10 map

  corresponds to the IP NAT

  !

  !

  !

  control plan

  !

  !

  !

  !

  !

  !

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  exec-timeout 30 12

  privilege level 15

  Synchronous recording

  transport input telnet ssh

  !

  NTP-period clock 17208070

  NTP 17.151.16.21 Server

  end

  As I've mentioned earlier, you can of course ping from router to 192.168.0.2 because they are in the same subnet. It uses ARP instead of routing to the device when you are pinging on the same subnet.

  The switch is configured with the correct default gateway? The switch must be configured with the default gateway 192.168.0.3.

  You also mention that you can ping 192.168.0.30 which is beyond the router. This means that it is not the router VPN configuration error, but rather the terminal that you are trying to ping since you can ping 192.168.0.30.