Similar Questions

• How do I connect my new Apple TV to an Onkyo receiver so I can listen to music on zone 2?

  I have an Onkyo TX-NR515 A / V receiver attached to a TV Apple 3rd generation. The receiver only accepts an analog feed its speakers to zone 2, to solve that I connected outbound connection of ATV HDMI Theater 1/home area and the outgoing optical connection in an analog converter that I am connected to the digital input TV/CD which became ATV feed source for zone 2. I recently bought the new apple TV, when connecting, to my horror, I discovered that it was only a point of sale, which means that I don't have a second signal to transform analog and connect to zone 2. Any ideas on how I can resolve this issue without transforming the two areas in analog or to buy a new receiver? So far the only feasible option I can think is to keep my old Apple TV, give a new and berating the Onkyo and Apple for her.

  They sell HDMI optical converters as Mark J-tech, you could add to your Setup program to make it work.

  However, your amp inputs HDMI on the wazoo.  What is your current speaker configuration and that you use the zone 2 for?

  It is a simpler way to make it work.

• ITunes does not sync Apple podcast app with my Nano

  iTunes does not synchronize my Apple podcast app, with my ipod nanos podcasts.

  The result is that if I'm half listening to a podcast on my ipod nano, and then use the usb cable for syncing with itunes, then connect my iphone 5 via the usb cable and synchronize with itunes podcast Apple app reflects not the amendment, despite the fact that initially the app podcast Apple pulled all the podcasts to itunes.

  That is to say itunes is not cross sync from my ipod nano at Apple podcast app.

  That's what itunes is done.

  Simple synchronization works very well and if I was not an iphone owner then everything would be as expected it is say podcasts of nano sync properly, or what if all I had was the application of podcast Apple iphone would be nice synchronize. But sometimes I want to listen to on my Nano, and sometimes on my phone and continue on from where I left on my Nano, I thought that was the point of the Apple ecosystem?

  Use iTunes Feedback or Apple Bug Reporter to report the problem and make the Apple to know how you want it to work as before.

  TT2

• problems with sending/receiving messages

  For the last two weeks my iphone 6 s and my son 6 more have had problems with sending/receiving messages in the texts of the Group and regularly comes to a voicemail.  Messages are not at all or you may be able to receive them. Then last night on a group text between me and another user of iphone and a droid user messages were not all going through and an 'unknown' appeared on the screen of the droid users as if this person has attempted to send a message to our group text but nothing was there.  Iphone users could not see it.  This morning - messages still does not go through the text of the group or on one.  Any ideas?

  SMS texts are a function of carrier

  Control an upgrade of the carrier

  If the droid user used an iPhone before having them their registration number

  Also check with support carrier technique

• can Apple Watch connect with monitor polar heart

  can Apple Watch connect with monitor polar heart?

  Hello

  If you are referring to the H7 polar, then Yes, we can.

  Firstly turn off pairing the monitor from other devices which he may previously have paired with (for example your iPhone), then:

  • Wear the polar H7 (which lights up by being broken to the strap and rotates when detached).
  • On Apple Watch, go to settings > Bluetooth.
  • Wait that Polar H7 appears, then press it.

• Apple not recognized with the new update ID

  What now, after the update

  Apple not recognized with the new update ID!

  I have the same question. The user and the password are ok because I can log in here: https://appleid.apple.com

  But after the last update my iPad say that "the apple ID or the password is incorrect."

• Can I pay for the apple's music with an iTunes gift card?

  I have $10.01 on my account and they sent me an email saying they charged it to my house but I was under the impression that the card would work. I don't have a payment option on my account to something other than the gift card. I wonder if they will eventually take money from my iTunes or will really want to make me pay the invoice they send me.

  Hi madison0505

  Yes, you can pay for the Apple's music with an iTunes credit. If you have enough credit to iTunes, which is used first.

  It's actually how to pay my subscription of Apple's music.

  Apple's music is $ 9.99 / month, but you did not take into account applicable sales tax.

  I pay $10.69 / month after sales tax.

• Feather of apple works well with the iPad air2

  I would use a pen to take notes and ratings on Adobe reader etc. will be (or is) the pen of Apple works well with iPad air2?

  # Apple pencil is only compatible with the iPad Pro.

• Stuck on Start Up Apple screen logo with 50% progress bar, tried everything. Help, please!

  Hello world. I'd appreciate it really all the advice that you can offer me to help me fix my laptop. I have a mid-2010 Pro 2.4 GHz Core 2 Duo Macbook running OS X Yosemite. A year ago, he started trolling a lot, so replaced the HDD with a Samsung 850 EVO 120 GB SSD internal 2.5 inch SATA III. He works much better since.

  A few days ago, I bought a Google Chromecast and had set up with my MBP. Subsequently, he began trolling and I noticed there are apps in the Launchpad, that I had never downloaded (reader of Google, Gmail, Youtube, etc.). I could not remove these applications or drag them to the trash. Concerned, I decided to back up my files on a USB key and re - install the OS X.

  However, during the priming of the MBP, it is stuck on the Apple logo screen, with the bar never go beyond 50%. (Photo: http://postimg.org/image/66qh6x633/)

  What I tried:

  PHASE 1 (Before reformatting)

  -Safe Mode: Button power button and shift held down. Hit or miss, worked 1-2 times, but when I reboot, is again stuck at the Apple logo.

  -Reinstall OS X: CMD + R; After 15-20 minutes get to OS X utility screen; Reinstalled OS X Yosemite; 7 hours to reinstall - but when the mbp restarts to complete the installation, it is stuck at the Apple logo again.

  -Reformatting: CMD + R; 15-20 minutes get to OS X utility screen (several reboots to work); Select repair for all discs/drives (Samsung SSD, HD Recovery). Exit said that both are very good; Select clear to HD recovery. When this was done, I tried to reinstall OS X Yosemite, but the MBP shuts down suddenly. When I turned on it again, it is returned to be stuck on the loading screen Apple logo. Attempt to restart after 15 +, but same result every time.

  PHASE 2 (After reformatting).

  -Power-> CMD + R = blocked screen Apple logo with 50% progress bar

  -Power-> Option = shows 2 player and free Wi - Fi area (Pic: http://postimg.org/image/58qi2j1vl/); Have you tried all the combinations, but regardless, always gets stuck at the screen of the Apple logo to 50% complete, after an hour, I suddenly hear ' to use English as the main language... ". ", but the screen is still stuck. I left it on 36 hours once and nothing has changed

  -Power-> Shift = error (Pic: http://postimg.org/image/tahklsvy1/); Keep restarting or shows some other error (Pic: http://postimg.org/image/thstc6b59/) and restart. Never crosses.

  Tried other things:

  -Reset PRAM: When restarting MBP, is stuck at the Apple logo screen, 50% progress bar

  -Reset SMC: Stuck on the Apple logo screen for a long time and then the screen turns off, but the laptop is still on. When I press Caps Lock, the indicator light lights up. Also, after some time, I again hear "to use English as...". "even if the screen is off. No matter what I press, it does not wake up to the screen.

  Note:

  -The bottom of the laptop feels hot (maybe), but I do not hear the drive in motion.

  I am trying to save my mbp because I can't get a new one for a few months. Any advice/help is greatly appreciated! Thank you very much!!!

  P.S.: I only am not too computer savvy, please use everyday words words/non-tech, when possible, thank you!

  Remove the SSD and install it in a closed Chamber.  Connect it to the MBP via USB.  It will start?

  Ciao.

• Apple Cinema Display with old Mac

  Hello! I was wondering, I have an apple Cinema Display with the famous ADC video plug. I also have a couple of old Mac without a monitor, for example a performa 6360 Powermac 6100 and Macintosh iicx and Iisi. Y at - it a video adapter to use the movie with these old Mac screen? is this possible?

  Thanks in advance!

  The main obstacle is that a screen ADC must get its power through an ADC port on the computer. The old Mac you list can only the power of their old school connectors.

  I remember this adapter:

  http://www.eBay.com/ITM/Apple-Mac-A1006-DVI-to-ADC-adapter-cord-for-cinema-monit 221995991474 or-display-EMC-1918? hash = i...

  be needed to power a monitor ADC to an ADC not Mac, but I would feel much better if another old graybeard archived to check my aging memory. You still need an adapter to convert the DVI on the adapter port 15 pin Apple old Mac. Some 6100 s required a special just HDI15-to-DB15 adapter to use a normal Apple display that would have been contemporary the 6100:

  

• How can I replace the Playlists tab on bottom of Apple's music with the Connect tab?

  How can I replace the Playlists tab on bottom of Apple's music with the Connect tab?

  Found my own answer online.  It's in the Restrictions under settings.

• Is the apple tv compatible with 4 K tv

  Is the apple tv compatible with the 4 K TV

  It will work with 4 k TVs but feed only with standard high definition (1080 p). All will be high range for its 4 k display.

• Apple ID associated with too many credit cards

  Apple ID associated with too many credit cards

  This can be useful:

  Change or remove your information from payment of Apple ID - Apple Support

• Replacing the old Standard Wireless Optical Mouse... can new mouse- or even model work with old receiver (mouse/keyboard)?

  I have a model 1025 MS Standard Wireless Optical Mouse that has a flashing click function (it often does register any). It is part of a game that uses a keyboard with the same (office-puck-type computer) wireless receiver. I would only replace the mouse with all that is the closest current model (or maybe I can find a refurb or exact same model used, if need be).

  QUESTION: The interchangeable receivers for a given model, or that they can be used with only one unit (mouse) specific?

  I'm guessing that they refer to the receiver, otherwise with a range of 300 ft, chaos would result in an office full these. But maybe also this "overlay" is insider manually first handshake which is known later. If so, then there's a chance? My mouse: model 1025 p/n X 800127-113

  The BIGGEST QUESTION, then maybe: a current 1000 series mouse will work with the receiver old (my model is more made, apparently)? Thank you!

  It depends on the frequency that work on the mouse and the base.  I tried to find info on your old mouse and there is nothing available.  I think would be best to simply select a new wireless mouse.  It will come with a wireless receiver dongle that you can plug into a USB port.  I think you'd have a very hard time finding a new mouse that will use the same exact frequency as the old configuration.  If you're short USB ports to plug an extra dongle you can always buy a USB hub for next to no money. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• Help with Apple TV (4th gen) ADCOM receiver.

  I'm trying to connect my Apple TV (4th Gen) to my receiver with basic cable AV (sound). I have an Apple TV to TV HDMI. The audio input of the TV, I have the AV cable connected to my output of receivers. I can't understand why the sound is still coming from the television and not sound surround. Thanks for any help!

  Note:

  My TV is a Sony kdf-e42a10

  My receiver is an ADCOM GTP-600

  It's a little tricky because of the age of your components.

  You should connect the plug the ATV HDMI to TV. You then connect the stereo audio output TV at the input of the receiver. (Your description reversed entry and exit.) You must then turn off the TV speakers in the TV configuration menu and select the right input on the receiver. You get digital surround sound with this Setup, but you could get Logic Pro.