Apple Watch drop connection with Plantronics BackBeat FIT

Similar Questions

• Apple Watch Wifi connection

  I recently bought a Apple Watch sport and noticed that it does not connect to my home network. Can someone help me to try to connect to the network?

  I have at & t and Motorola NVG589 router, I believe that it is compatible with the Apple Watch.

  Hello

  Apple Watch can connect to a Wi - Fi network if the network is 802.11b/g/n 2.4 GHz and your iPhone, while being connected to your watch with Bluetooth has connected to the network before. If your iPhone is not in the scope of Bluetooth compatible Wi - Fi is available for free, your Apple Watch uses Wi - Fi.

  If you encounter any problems with your watch connect this way, try the following steps:

  • Before you begin, make sure that you made a note of:
    • Name of your Wi - Fi network.
    • The type of encryption it uses;
    • Your Wi - Fi password.
  • With your iPhone connected to the Wi - Fi network and with your watch near and connected to your iPhone via Bluetooth:
    • On your iPhone, go to: settings > Wi - Fi.
    • Press the 'i' icon on the right side of entrance to your current Wi - Fi connection;
    • On the next screen, click on forget this network - leave a few moments;
    • Then, with a short break between the two, disable and re-enable the Wi - Fi using the toggle at the top of Wi - Fi free.
  • Reconnect your iPhone to the network 2.4 GHz Wi - Fi.
    • If you have a hidden network (ie the network name / SSID is not broadcast), choose Add to the network with 'The other', then enter the name of the network, the encryption type, and password.
  • After that your iPhone has reconnected, leave a little time to get the information to share your watch.
  • Test your watch by placing your iPhone in Airplane Mode (via central control or via settings > airplane Mode).
    • On your watch, slide up on the dial of the watch, then swipe left / right until you find the look of parameters;
    • This should say connected, and display a green cloud icon to indicate that it is connected to the Wi - Fi;
    • Slide down again to return to the watch face.
  • Take your iPhone out of airplane Mode when you are finished.

  Note that, if your iPhone connection is possible via Bluetooth, it will always be used by your watch rather than connecting to a known Wi - Fi network.

• Apple Watch can connect to the WiFi of my airport when it is set to 2.4 and 5 GHz?

  Apple Watch can connect to my WiFi?  When the iphone is out of reach of Apple Watch of bluetooth, Apple Watch goes WiFi that is connected to the iphone. The WiFi of Apple Watch is 2.4 GHz. My Airport is 2.4 GHz and 5 GHz. in case the Apple Watch connect?

  Help here > Bluetooth and Wi-Fi on Apple Watch - Apple Support

• Apple Watch stay connected to the iPhone 7

  I unpaired my Apple Watch from my old iPhone reset 6, combined with my new iPhone 7. Since then, he continues to lose its connection, even if both devices are never spaced over 3 feet. It's killing the battery on the Apple Watch in the short term.

  What is happening to others? Any suggestions on how to keep connected?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first;
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the pairing and pair your watch again:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• My iPad is not visible for my iPhone via Bluetooth 6 and won't connect, I tried to reset the network configuration, erase and reset iPad, hard reboot. My Apple Watch is connected to my iPhone. It is visible for my Samsung phone.

  My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.

  Duncan2011 wrote:

  My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.

  You can only pair two Bluetooth to attach only apple devices.

  Here are the profiles of support iOS: Apple supported Bluetooth profiles supported -

  Get help with Personal Hotspot iOS - Apple Support

  Share your Internet connection with Personal Hotspot - Apple Support

• Apple Watch not work with iOS 10

  Hello

  I currently have an iPhone 6 more, will the iPhone Plus 7 Friday, but I decided to go and download iOS10 on my iPhone 6 Plus.  After that, I noticed that my Apple Watch was no longer in harmony with my iPhone.  I did several automatic reboots and ended up doing a factory reset.  After reset of my phone to the Apple Watch, I noticed that the watch is not reset.  So I reset the watch to the watch factory settings.  Now that he is back to zero, I can't pair it with my iPhone.  I even tried to do it manually and I have the same problem.  Does anyone have a solution for this or should I just wait my iPhone more 7 happens Friday?

  Hello

  When you pair your Apple Watch to your iPhone, make sure that you follow the steps detailed here, including the option to restore from backup if:

  Set up your Apple Watch - Apple Support

• The new Apple Watch comes compatible with my iPhone 5 s 16/09/2016?

  Hello world

  I am interesting in buying the new Apple Watch, and I don't know if the watch is compatible with my iPhone 5 s.

  I already pre-order my iPhone 7 more, but it won't do anytime soon, and I'm sure that the watch is compatible with the new more than 7. I wonder all the old iPhone 5s. My iPhone 5s does not use IOS 9, but 10 of IOS.

  Thank you

  Hello

  Yes - the new Apple Watch models are compatible with your iPhone 5s.

  As for the first generation watch, the new models require iPhone 5 or later.

• Apple Watch not advise with haptics during incoming calls

  Hi, my Apple Watch is not advising me with haptics for incoming calls. When I see the call on my phone and check my watch, I see appear on my Apple Watch face, but not with haptics the incoming call.

  I have the latest iOS on my iPhone 6 (9.3.4) and on my Apple Watch (2.2.2)

  Must be with the implementation in the application of Apple Watch, configure the options for the phone in the mirror?

  Hello

  It can help to use these settings:

  • On your iPhone, in the application of the watch, go to: My Watch (tab) > Notifications > phone:
    • Choose custom.
    • Allow everyone to view alerts, sounds and Haptic.

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• Why my Apple Watch is constantly with the application of the workout and kill my battery

  Since the last Watch 2.0 update my watch is constantly showing the little running man at the top of the watch.  He seems to think that I work constantly and telling me I'm burning crazy amounts of calories (pretty sure he thinks that my train ride is me currently underway).  For not to mention my battery dies quickly.  I started the day at 630 with 100% of battery, the green light on my wrist has served all day and my battery is at 13%.  How can I fix this.  I have not matched the watch and combined with new, but that solves nothing.  Any help would be appreciated since my watch is basically useless at this point.

  Hi Steve

  Green rider icon indicates that your watch has currently underway training.

  You can currently get a workout paused in the application of the workout or a third-party (for example, Strava) fitness application.

  If you have used Strava or any other third-party application, you must put an end to the activity via this application on your watch (not on your iPhone).

• WRT54G2 Dropping connection with active Access Restrictions

  Recently, we have replaced Nano from my 13 years with a key, which means that it can now access the internet from (almost) anywhere in the House.  So I did some research and found the WRT54G2 of Access Restrictions.

  I got the WRT54G2 for 5 years, and it has been extremely reliable.  I'm a programmer (although, ironically, not necessarily PC-savvy!) who works full time at home, and I have no problem with the network.  But now that I have implemented Access Restrictions, he abandoned his connection once or twice a day.  So it falls, it becomes quite slow.  Once it comes down, I unplug the router, wait 60 seconds and plug back in.  Then everything works again.

  I found no other people (in the forums) mention the same problem, but I hope someone can help out me.

  Access restrictions are the following:

  • Status: activate
  • Change the list of PC: IP range 01:2 ~ 254
  • Days: every day
  • Opening hours: 24 hours
  • Blocked Services: NO
  • Blocking of the website with URL: white
  • Blocking of the site by keyword: naked, nude, etc...

  I have 3 polciies due to the number of keywords I am trying to block, given that each policy allows only 6 keywords.  Policies are all set to the top in the same way except, of course, the key words.

  The WRT54G2 is model V1, and the version of the firmware is 1.0.01.   The upgrade of the firmware help?  Download from Linksys for model 1.0 page, says "no available firmware/driver download.

  Access restrictions, "IP Range 01" should be in 100 ~ 149 instead of 2 ~ 254?  I am train to restrict our family office, my laptop, iPad and keys - anything in the House with internet access.

  Thanks in advance for your help.

  Yes, I think that any other additional filtering that by default will slow down most any router. It is probably more problematic for wrt54g2 because if it is little CPU and memory.

  I guess you can try to reset to the default values and reconfigure him from scratch. But still, I don't think that the wrt54g2 has a very large CPU that can handle a large number of filtering.

  Maybe try a solution like Norton DNS DNS? Or open DNS? Instead of access restrictions. I don't know, I'm not real experienced with access or parental control restrictions.

• Can my Apple Watch with Weight Watchers app sync

  Does anyone know if my Apple Watch can synchronize with weight watchers app?

  Hello

  Another user who has the same issue recently reported that Weight Watchers advises them:

  • "I just talk with the service the customer to weight watchers. Apple Watch and WW app sync yet and they're not sure when / if they will do it. »
  • More information: can not sync ability weight watchers app Apple Watch

  Also: the description for the application of Weight Watchers does not support synchronization to Apple Watch. It also appears to advise that sync iOS health app has been temporarily withdrawn:

  «iOS 8 + users can connect with health of Apple app to sync your data from health and fitness...» This feature will return soon with other... "We regret that a number of features have been temporarily removed, but new and better versions will soon be back."

  More information:

  https://iTunes.Apple.com/GB/app/weight-watchers/id331308914?Mt=8

  Support resources are available from Weight Watchers here:

  http://www.WeightWatchers.com/help/index.aspx?PageID=1107041

  Contact information for assistance:

  http://www.WeightWatchers.com/help/index.aspx?PageID=1022291

• I have problem with my Apple Watch, during the step count of the market does not appear on the watch?

  I have a problem with my Apple Watch, when I use the watch on my treadmill, keep the phone, the number of step does not appear, the whole market is a waste if it shows only not on Apple Watch, how to solve this problem?

  Hi Shabbir

  Apple Watch has two integrated health and fitness apps: enforcement activity and the application of the workout. For best results, make sure your arms naturally swings while walking on the treadmill, as Apple Watch uses movement of arm (measured by the built-in accelerometer) to track and evaluate movement for indoor activities. If you use the application of the training session, your watch will also measure your heart rate continuously for training in order to estimate the calories burned.

  Check that you have configured the application of the activity:

  -Press the rings activity on your watch dial or open the application for the activity (if you have not set it upwards, you will be prompted to answer a few questions).

  Also, make sure that the fitness of tracking is enabled:

  -On your iPhone, in the application of Eve, go to: Watch My > privacy > Motion & Fitness > fitness monitoring.

  You can improve the accuracy of the estimates related to activity in calibrating Apple Watch (take your iPhone with you on walks outdoors or tracks, connected to your Apple Watch and with location enabled Services - see the detailed instructions in the article to support below).

  More information:

  http://www.Apple.com/watch/health-and-fitness/

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• GPS number race Nike Run Club with the Apple Watch 2 series

  I have my Apple Watch 2 configuration with the Nike Run Club app.  Repeatedly, I tried to run without my iPhone (6 current execution 10.0.2) and for some reason that GPS doesn't seem to work. While I open a session is running, pace/time is completely off and it isn't GPS data capture because cards do not appear in the app once I connect and send the run. Also, I assume that the GPS does not work because the pace is so far off the coast. It seems to me that it is logging tracks using the accelerometer, which has not yet been resolved as I want to be able to connect the tracks using GPS.  I need help. Has anyone else had the same help as he attempted to use this app? I bought the watch to replace an old Strip, Nike +, in the hope that I could run without the phone, but it has been an uphill battle implemented.  The Nike Run Club app not yet been updated in order to make full use of GPS data from the Apple Watch?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support