Application Finder does not, the computer will not be closed

Similar Questions

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Sierra: Finder does not display the modified files

  I just upgraded all my Macs and minis to Sierra 10.12 and have run on something that looks like buggy.

  My usual use of a Mini special is transcoding many video files, and I have a collection of (painfully tedious) shell scripts that manipulate file names, do the transcoding and moves the files to one directory to another to make this work. In * most * folders that I see in the Finder when a file is moved to the directory it shows in the Finder correspondent discovered, but in * some * of them, the Finder does not update when a new file is moved to the underlying directory, is renamed or deleted entirely.  For example, I see there are 28 video files to be converted into a directory named FLOOR TRANSCODE using ls - ls in the terminal, but only 6 looking at the same folder in the Finder.

  These scripts have been working for several years on this material under El Capitan and Yosemite.

  Records I've noticed so far are all in the root of the drive HD server, not under no/Users. Finder appears to display all files when displaying the files moved to USB external drives for storage after transcoding. Another element that might be relevant, is that my normal view of the mac is via RDP (Remote Desktop "headless", no physical monitor in use).

  Have you noticed something similar?

  This Mac Mini is late 2012, MacOS Sierra 10.10

  I'm not much of what you have written (for example, I don't know what "RDP").

  In any case, based on the title of your post, I will answer how to find files "changed" in the Sierra of MacOS.

  I just use the search box and type "Date: today".

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

  trying to remove a Malwarebytes(anti-malware) but the computer will not be aloud, how to remove it?

  See if this helps:-

  http://www.ComputerActive.co.UK/CA/download-review/2040736/remove-unwanted-software-Revo-Uninstaller-19

  If she please vote as helpful.

  I use the software that you want to remove and would recommend not removing it because 2 times last year he picked up the items that Microsoft Security Essentials does not.

• Windows Vista update (April 1, 2011) now the computer will not boot.

  1. Windows Vista update (April 1, 2011) now the computer will not boot.  Love updates been invited but now computer does not start. Just gets up to a certain point, and then restarts. Impossible to start safe mode! Don't know what to do, please help!

  Hi Ema1976,

  Do you have an error message when you try to start?

  Step 1: Disable the automatic restart of the menu advanced startup options and then enter the error message, see the link below:

  Advanced-Startup-options-including-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: Follow the steps mentioned in the link below to access system recoverytools and run the Startup Repair tool again.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

   

• Computers button just flashes and the computer will not start

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Computer on button just flashes continually and the computer will not start.  I unplugged everything and put it back together.  Same thing.  Nothing.  Monitor is on, but nothing on the screen, of course, because the computer does not start at the top.

  Hey Bowers

  you get a splash screen on startup with an acer for hp dell etc. or the logo of the motherboard

  otherwise, it would seem that you have a hardware problem

  Contact the manufacturer of the computer or a local reputable computer repair workshop

  Walter, the time zone traveller

• The application name does not change in 2.0 WebWorks

  Hello

  I changed the name of the application in the config.xml file in the www folder. But when I reinstall the application again, the application name does not change. Removal and installation of new but certainly not it's always the same thing with the default name which is «WebWorks app» What is the problem? I couldn't change it.

  Thank you.

  Hello

  It is a known issue with version beta. The name and the icon is changed in the file of the bar, but persists on the device. If you have to deploy the same file on another device appears the correct name.

  The solution is to change the code of the widget as well.

  This will be fixed in the Gold release.

• I want to use Windows 7, the computer will not accept my 25 digit product code please help

  I want to use Windows 7, the computer will not accept my 25 digit product code - please help.
   

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Application module does not record the client interface

  Hello.
  
  The problem is that the application module does not record the client interface that is automatically generated classes.
  
  Whenever I go to the module of the application and add them, they will be gone next time I open the workspace. Is this a known bug or is there something that I am missing?
  
  I use jdev 11g relsease 2 version 11.1.2.3.0.
  
  Please help, because I can't get anything done.
  
  TIA

  Possible cases:
  -There is something wrong with the method you created.
  -The return type does not match

• Have dwnloaded Firefox, but invites to drag in the applications folder does not

  Downloaded Firefox, but invites him to drag the icon to the applications folder does not occur. Please notify. Thank you

  If the disk image file is not opened automatically, then you must open the DMG file yourself.

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

• The computer will not send messages I type, but it receives messages correctly

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  the computer will not send messages I'm typing... but he recedives messages aok...

  Hey Keithkohrs,

  Usually, this means that outbound connections to the server are not properly Setup. Try contacting your email provider to ensure that your server settings are all correct. We can try to help you get the server settings appropriate if you let us know who provides your email address and what program you use as an email client.

  Hope that helps.

• Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Virus deleted and now the computer will not start... I get the blue screen with an error that says STOP: 0x0000007B (0xB84C3524, 0xC000000E, 0x00000000, 0x00000000) what is the problem? !!

  Hi ipitedafoo,

  You can check if this article helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  See also:

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

• Loss of internet connection after sleep and the computer will not be closed.

  I have a laptop GateWay w / Vista 32 bit OS.  Recently connected to the new internet connection and can connect without a problem.  However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart.  It just hangs and I have to make a hard stop and start again.  If I remive the connection Wireless via safe mode things is back to normal.  However, the cycle repeats when the connection is restored and the computer enters mode "Eve".

  Hi bobert1953,

  This problem can occur when the power management profile turns off your network adapter.

  Method 1: To disable power management feature ent of network cards

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 500 the application author does not match the author token of debugging

  My name is Jean-François Geyelin. My application name is PewPew.

  When you try to run PewPew on a playbook, I get the error "500 the Application author does not match debug token author.":

  the command deploy blackberry - installApp-password abdelkader 192.168.1.37 - package device-Debug/PewPew.bar returns:

  Info: Send request: install
  Info: Action: install
  Info: File size: 3575023
  Info: installation...
  Info: Treatment 3575023 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 the Application author does not match debug author token.

  I did check the following:

  the blackberry-nativepackager - listManifest PewPew.bar command returns (among others):

  Package-author: Jean-Francois Geyelin

  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  blackberry nativepackager - listManifest library/Research\ In\ Motion control / debugtoken1.bar returns (among others):

  Package-author: Jean-Francois Geyelin
  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  What should I check or what is the problem?

  
  

  Problem solved by clearing and forwarding of the token of the device debugging.