Application installed on network shared car-business mode

Similar Questions

• Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

  When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

  Hello MarkPogue,

  Thank you for the question!

  I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• The KB2929437 patch is not installing on my PC. Without this fix IE 11 business mode is not activating.

  I am running Windows 7 and IE 11. The KB2929437 patch is not installing on my PC. When you try to install, I get the message that this patch is not applicable to your PC. Without this fix IE 11 business mode is not activating. Help, please

  Hello

  Please contact Microsoft Community.

  Please provide detailed information about your question.

  According to the description of the problem, it seems that you can not install the patch (KB2929437), this problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  If it helps, try the methods and check them off below.

  Method 1

  If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2

  Step 1

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Step 2

  Try to follow the steps in the Microsoft Article and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 3

  If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Additional information:

  You can also refer to the following Microsoft article for more details on the update (KB2929437) .

  Description of the update of security for Internet Explorer 11 on Windows 7 and Windows Server 2008 R2: April 8, 2014

  http://support.Microsoft.com/kb/2929437/en-us

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Network TCP/IP XP mode connection problem

  I just bought Windows 7 pro and installed XP mode in order to run programs that only work with xp.   My question is that some can tell me how I can connect to a specific network in xp mode.

  Hello

  Virtual machines use the hardware of the host, but for their own internal use, they imitate their own material.

  XP-Mode is always 'wired' even if it is co tailing on a wireless card. For example, you cannot run a XP-Mode Wireless. A valid connection is chosen by the

  Host and the virtual machine uses a card PCI of Wired Intel 100 Mb/s, getting its signal of the current host connection.

  When you configure the updated virtual computer to use the adapter on the host computer.

  http://www.ezlan.NET/Win7/XP-mode-NIC.jpg (This is done in the general framework of the VPC).

  If you have a router with DHCP, it will then automatically obtain an IP address as a standalone computer.

  Otherwise (in the XP VPC ), examine the properties of the network card and configured its TCP/IP as you would with any other XP Pro computer in network.

  You can use the static IP address or set it to automatic get.

  For example, http://www.ezlan.net/example/tcp2.jpg (this is done inside of the EPM XP Mode, it runs active on the screen).

  Set the static IP address under Win XP, http://portforward.com/networking/static-xp.htm

  -----------------

  When all the foregoing is configured correctly, the XP-Mode acts as a standalone computer on the network. It follows all the ordinary rules of connection to local networks, sharing files and printers, as well as connecting to the Internet on its own.

• Applications installed with device drivers OR

  I bought a few applications that have been written entirely in LabVIEW that also use data acquisition OR PXI cards.  Before the installation, I installed the drivers of devices OR newer.  I discovered that more than 70 applications installed with the drivers.  Where can I learn what do each of these applications?  I need this information because, in order for me to install device drivers OR on my networked computers, I need to know what my local network vulnerabilities could be introduced with these applications.  If anyone can help?  I enclose a list of executables (*.exe) installed in the C:\Program NIUninstaller Instruments\ folder only.

  Hi USAARL.

  I follow with you on a private message. As mentioned, we have what you ask because well documented right now, it's something we will address actively. We are having this type of information will be documented and available to all users soon. Please, followed in the manner specified in the private message.

• network shared variable treatment

  Hello everyone,

  Someone tried to link data from a network shared Variable to the query (running in a smartphone or Tablet) made with "treatment"? I know on the dashboard of data but I would like to know if West someone working with these two technologies. Thanks in advance for your answers, comments, suggestions, etc.

  Hello Bene

  Apart from the dashboard of data there are other technologies that you can use for mobiel applications in LabVIEW

  If you already use a shared Variable, then the easier and faster way to connect your mobile device and the PC on the same network and then simply use DataDashboard to read from your published variable.

  You can also create your own thin clients or http Web pages and link to labview, send sms, share a front panel to distance between computers

  Here is a link where you can read all about it

  Cheers and good luck

• Why can't I install Turbotax 2010 Home and Business in XP?

  Several months ago, I installed Turbotax 2010 Home and Business in XP Pro and set up two returns. A few weeks later, I went back and TurboTax would not. Thinking that the files have been corrupted, I uninstalled TTH & B and tried to re - install from the CD, only to receive error messages. So I tried to use the cleanup tool, which partially worked, but I still get error messages. Other things I've tried only to get the error Stops include:

  1 clean the registry both manually and with the cleaning tool
  2. clean the files .net (3.5 and below)
  3 reinstall XP
  4 reinstall MS Installer.
  5 copy the disc on my desktop and install - always get error messages.
  6. cancellation of registration and record msiexec.exe
  7 detection and cleaning with StopZilla Reg Cure and PC Health Advisor (which is SUPPOSED to fix)
  8 Mode installation without fail, at the command prompt and in other modes
  9. other methods

  If you can help, I would be very happy.

  What are the error messages?  Word for Word, please.

  What "cleaning tool" specifically?  What is "partially worked?  How could you say this partially worked mystery cleanup tool?

  • #1, second part, of least not such a great idea - even if your machine...
  • #2, which means "cleaning"?  Versions of the .NET Framework are all independent.  Just because you have later does not mean that you have all the versions you need.
  • #3, that * you * average by reinstalling?  Repair?  Or real format and install?
  • #4, OK...  You must have had a reason for this?
  • #5, interesting - approach and yet you still don't give error messages?
  • #6, OK...  You must have had a reason for this also?
  • #7, I have no words to #7...
  • #8, okay - I can see which ones are something to try...
  • #9, the #9 was really necessary to add?  * smile *.

  What you say about intuit?
  http://TurboTax.Intuit.com/support/

  As it seems your entire number around their product centers, which help you got on their part?  Given you didn't mention (and you were detailed enough) get help from them - I suppose you did this road for some reason any?

  If you are running their "System Check" tool, you can copy and paste the results presented here?
  http://TurboTax.Intuit.com/support/IQ/install-product/TurboTax-2010-system-requirements/GEN12939.html
  (Specifically: https://turbotax.intuit.com/support/detect/index.jsp )

  The results of the example:

  Operating system:	Windows
  Version of the operating system:	7 (x 64)
  Web browser:	Internet Explorer
  Version of the Web browser:	8.0
  Status of JavaScript:	Activated
  Flash version:	10
  Screen resolution:	2560 x 1600
  Popups:	Popups allowed
  User Agent:	Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C; InfoPath.3)

  Past through their list of common interest issues?
  http://TurboTax.Intuit.com/support/IQ/install-product/Windows-Installer-and--NET-errors/SLN12216.html

  Specifically their installation problems?
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/GEN12454.html

  HTH

• Can't find applications installed on the mini pro: S

  I bought this phone yesterday and the first thing I did was last updated for the software. It went well. Then I installed some applications via PC who worked as they should and went out for a walk. Later, I checked my phone bill, and it was abnormally huge so I guessed that some background applications use internet to do what they must do and put me in this situation. I couldn't stop my Bill raise and said that at one of my friends who helped me in calling his friend and asking him what to do because he has the same phone. He helped me by telling me to turn off "Data Enabled" in settings/WIFI and networks mobile/networks/data access via the mobile network (data set) and my money leak stopped. It was great. When I came home later, I wanted to continue with the installation of games and apps from Android Market via a PC, but I could not. On the web site, I selected an application, click on install and new window pops up telling me that my phone is supported. I pressed install again then it says "this application will be downloaded on your device shortly." Just like earlier that day, then I pressed OK. A took my phone to check the application installed, but I couldn't find it. I've been checking everywhere but no trace of it. I tried other apps and it was the same thing. Then I did a factory reset or however, it's called (the one with the phone being erased memory) and the problem was still there. I just reinstalled my phone software and the problem persists. Someone knows how to fix this? It's a bit disappointing that what happened first day.my conjecture is that the app would not allow the phone, so maybe that's a problem suddenly on my PC?

  the "active data" function controls your internet connection through carrier network

  you need an internet connection to download the app... it may be the network of the operator or WiFi
  first day that your data transfer has been enabled for all the applications that u installed by means of pc have been downloaded

  but then you turned off your data traffic

  now that u installed apps (((after you disable data traffic))) through your pc would be in the queue of download >...
  as soon as you swith on the traffic of data, all applications will be uploaded, but again you will be charged heavily for the transfer of data from the android market on your mobile... so its best to do with wifi or activate certain data plan on your mobile

  conclusion: you need an internet connection (wifi or carrrier network) to download applications...

  Don't forget to mark the correct answers and useful answers

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Reference Dell wireless wlan network contoller care stopped working and was closed

  When I sign on my computer a pop box message titled: "dell wireless wlan network contoller care stopped working and was closed" and said "a problem caused the application to stop working correctly. Windows will notify you if a solution is available. "whenever I close the dialog box, it reappears in 10 seconds, say the same thing. i've tried looking for updates and correct the problem, but so far nothing is working even my wireless (of course). I don't remember the updates or installations on the eve of what is going on has begun. I had a few downloads, but those who were on a week or two ago and I have had similar to those downloads of before and it did not.  they the day before I started getting this message didn't notice or do something out of the ordinary on my computer. Help! Please and thank you.
  Oh and I get another message when I first turn on your computer but unlike the other reappear... and says something about an error with C:/Windows/System32/onex.dll and asked me to open it, but windows can not open it and I do not know what program to open it with and by using the internet option no longer works.

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest you put the computer to boot and check which application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: follow step 7 to set the computer to a normal startup.

  Method 2: I would say as update you the WLAN driver and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Run the hardware and devices Troubleshooter and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• Error 0 x 00000006 when you try to install a network printer.

  Original title: try to install a network printer when the search covers on the printer 0.00000006 error code what is it to say that I've looked everywhere and do not get results

  inatalling a shared printer, search for the error code 0 x 00000006 what this error code means?

  Hi carolnorris,

  I suggest you try the steps suggested by Srinivas R, from the following link and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/operation-failed-with-error-0x00000006-Windows-7/3deb8c17-AA1D-40a1-bdad-20dc2c9cb3d0
  (Applicable for Windows 7)

  Also, take a look at the link to the following article:

  Network printer problems

  I hope this helps.

• Windows Media Player Network Sharing Service missing in Windows Vista

  I use Vista and WMP11.  I have all the Vista and WMP11 installed updates.  I'm trying to set up the sharing and noticed that the Windows Media Player Network Sharing Service is totally absent from Services.  I ran the Vista System File Checker and it did not help.  How do we install this service?

  Hello
   
   
  1. have you made changes on the computer recently?
   
  I recommend you do a system restore to the previous times and check if that helps. I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Player network sharing problems

  Hello

  I operate a laptop Gateway using Windows 7. In recent weeks, I started receiving messages saying "Windows Media Player Network Sharing Configuration Application has stopped working and needs to be closed." After this, another message appears asking if I want to report the problem to Windows. This happens about once every 5 minutes or so, even when the Media Player does not work. If anyone has experienced this problem and is there a way to fix or disable this feature of sharing media player? Thank you for your time.

  Patrick Taylor

  Hello patrick1210,

  Sorry for the delay in responding to your message.

  In the views of others with the same question, it seems that maybe that's a problem with the file mf.dll.
  Some have been able to replace the file.

  A few suggestions:
  (1) run SFC to see if you have corrupted system files.
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  (2) register the dll from the command prompt. Go to a command prompt, right click and select 'run as administrator '.
  Regsvr32.exe mf.dll

  If please reply back and let us know if this helps with your question.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Debug an application installed from a signed .bar

  I sign my app with RSA keys to operate. If I generate the signed .bar export the project with the unit and then debug configuration I install it on the device.

  The question is: How can I debug my application?

  Obviously I can't just run the application in debug mode because in this way the application does not work as signed bar.

  Is it possible to attach the application installed with the bar to a debugger?

  Thanks in advance.

  When the application is built in release mode debugging is disabled. Core files would be generated, but they are generated in sandbox APP output mode (not that you can see the use of the system target file browser). The only way to access them is through your application itself (the next time that the launch of the app, it has access to its directory of newspapers in his sandbox).

• Install a network infrastructure for a single-node Windows Server cluster

  Hello
  
  Can you suggest me how to install a single-node RAC Oracle 11 g on a Windows Server 2008 x 64-bit? It's for testing purposes and I do not need two nodes. I know that Linux is better, but my company uses only Windows servers. Our former consultant has been able to do, but doesn't tell us how to, this server has been lost.
  
  I know that to install the first grid Infrastructure. Run the installation program "Oracle Grid Infrastructure", I could install a "Grid Infrastructure for a stand-alone server" successfully. But this Grill is not a RAC database. When you try to install the database software, which is available to me to install only "single-instance database", not "Real Application Cluster installation".
  
  Run the installation program "Oracle Grid Infrastructure", I have tried select the option:
  'Install and configure a Cluster Network Infrastructure'-> typical Installation:
  The name of the SCAN: SRVORAC-cluster
  Validation of ANALYSIS information
  INS-40922 SCAN invalid name - insoluble in IP address.
  
  Is it possible to install a network infrastructure for a cluster to a single node or a node on Windows Server?
  
  Published by: user521219 on January 30, 2012 12:46

  Hello
  You probably misunderstanding about single-node RAC. This feature didn't need that you have only one physical machine in a RAC, this in fact means that in a CCR environment (2 or more nodes), you can run your database on a single node (single instance), and then later you can move this single instance to another node of the RAC (so that you can make some fixes on this node making your database available all the time). It also has a few other advantages, see below.

  http://www.Oracle.com/technetwork/database/clustering/overview/UG-raconenode-2009-130760.PDF

  http://docs.Oracle.com/CD/E11882_01/install.112/e25666/whatsnew.htm#sthref8

  Salman