Apply camera profile

Similar Questions

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• Apply DNG camera profile scanner?

  I'll set up a workflow to analyze and process a large volume of slides.  I'm scanning with a Nikon LS5000 and Vuescan, sending the output DNG (linear) and the treatment and then in Lightroom.

  For me it's effective because it evens my analog and digital workflow.  I could also just released raw format tiff (not color corrected), but I like the small file size and the integration of the parameters of LR with DNG.

  I did tests to test for which I then created a profile of custom in the DNG editor profile color correction.  I am very happy with the level of mastery of the color in the profile editor and I would use it to apply the color correction to lots of scans turned on a particular film type (for example kodachrome).  I know that these tools are designed to be used with camera raw, but they do just as well with linear files.

  The problem is that as the dng file was created by a camera, but a scanner (even though EXIF data show the LS5000 as "camera") I can't get the profile is displayed in the tab Calibration/profile of the camera in order to apply to an image.

  Issues related to the:

  is 1 - possible to force the profile to load anyway? (LR might have an 'other' option in the profile tab)

  2-can we get LR / Profile Editor to consider the LS5000 as legitimate a camera, as opposed to simply produce a generic tiff?

  3 - can I somehow manually integrate my custom profile in a DNG so that the embedded profile is automatically good?

  Thank you.

  There is no reason why LR in principle should not be able to apply a profile to a linear DNG - in fact, if she does not, I would call that a bug as the DNG specification is not making the difference between linear or mosaiced image with respect to the use of profiles. And there are "real" cameras that produce the linear DNG. Some multi-shot supports for example.

  But just to go back to the basics, you are sure that your profile is the right place for LR to find - aka have reproduce you your process with a normal camera and it works?

  Sandy

• GO CRAZY! ACR camera profiles

  When I open a raw file with my d700 in ACR, I get all sorts of custom from the dropdown options camera profile. When I open a file with my D750, they are all gone, except for the half dozen standard (Adobe, neutral, Portraits, etc.).

  WTF I'm missing here?

  Profiles are specific to each camera model, so if you bought for the D700, then you would probably need to buy them, once again, for the D750, if they still exist for this camera.  Addition profiles there are a set of predefined settings that also apply in conjunction with the profiles, if I remember correctly.

• How to create a camera profile that works with a JPG image with my color chart to check inside? [was: color Checker chart.] Really need help]

  I got a color chart to check. It came not with any software whatsoever. I shoot my images in JPG format. I know it's not really ideal but I'm on a tight budget and don't have the money for a digital SLR cameras that shoot raw. Is there anyway that I can always create a camera profile that works with a JPG image with my color chart to check inside? My table also includes RGB values below each color. Maybe I can match each color in the photo these values manually? If so how is this done?

  Thank you

  Bryce

  I've never seen software that does what you ask for JPGs, only RAWs.  The main problem is that any profile or adjustment is calculated according a JPG of a particular chart photo would apply to the other JPG photos with the same white balance.

  Jpg does not use "camera profiles" anyway in Lightroom, the profile is always integrated.

  There is a product that allows to calculate the HSL cursor offset values given a JPG photo their own table owner who looked like a color checker, but had two lines reversed so the software could not be used with a standard-checker color, unfortunately.  Now their table has twice as many patches (48), and looking at it on their site I'm not too sure that it does not always work with JPGs or if she's just raw files, now.

  The graphic and software are called SpyderCheckr of Datacolor.  There are various software that do different things, but none are using a ColorChecker, so having one is mainly a loss until you get a camera that can take raw photos, so keep a humidity and temperature controlled environment as much as possible until you have the right camera.  You can probably use the grey patches to adjust exposure, but that's all.

  Today you need not a digital SLR to have raw photos, well.  My phone Galaxy S6 with the last update of Marshmallow and the software of camera update will take photos in format raw DNG in Pro mode which I can create custom profiles camera to use a ColorChecker, although the camera is really good in itself, so when I found everything first he could make DNG I took a little but now, I usually just use the camera to make the jpg unless the shot is really important and the lighting is not too hard.  I think that S7 phone's camera is even better.

  What kind of camera do you have?  Sometimes, there are firmware hacks that allow the camera to shoot raw format even if the standard camera cannot.

• Remove the calibration of camera profile

  I experimented with ColorChecker Passport of XRite and created several camera profiles.  I have one, I am satisfied and I'll delete the rest of

  C:\Users\{username}\AppData\Roaming\Adobe\CameraRaw\CameraProfiles

  as described elsewhere.

  QUESTION: What happens if there are still images that use one of the deleted profiles?  Will they get just "Adobe Standard" applied, or this (reference to non-existent profile) will cause a problem in the catalog database?

  I decided to try this by the movement of old profiles out of the folder (do not remove) with Lightroom does not, then from Lightroom

  The answer is that the image returns to the camera's ' Adobe Standard' profile.

• How to stop the bridge to automatically apply the profile to images?

  Adobe Bridge (CS6) seems always automatically apply the profiles of lenses (vignetting correction) my photos. I don't want to do that, I want the images have no correction applied by default. How can I do this?

  Thank you

  Dave

  Assume that you are talking about Camera Raw.  Depends on what you have set to the defaults in ACR.  You can set your own preferences and make sure the default value.

  There is also an Ant raw camera at http://forums.adobe.com/community/cameraraw if you have more in-depth questions.

• Failed to load custom camera profiles

  I use the two 3.5 Lightroom and Photoshop CS5 on a system of Windowx XP - Pro 64 bit with 8 GB of RAM and a lot of disk space.

  I use a X-rite color Checker to generate profiles of cameras custom whenever I do portraits or other color photo critique sessions. The camera profile is usually placed in the

  «Documents and Settings\...» {user...} Data\Adobe\CameraRaw\CameraProfiles application 'folder.

  When I try to apply a profile to either lightroom or ACR created profile one is not visible in the list box dropdown camera profile. When I check to see if the profile exists in the appropriate folder, it does.

  I used color profiles before and have always been able to create, and then select a profile. Now I'm more able to do that. I'd rather do not re-install all of my Adobe software since then I have to reinstall all updates and plug-ins.

  How can I get lightroom and ACR to see these profiles and use them?

  OK I understand my problem and it seems that it was a combination of things.

  First: X-Rite color checker cannot create a profile if any of the colors in the image channels are cut. Exposure via the Camera Raw/Lightroom setting and save the file with a DNG do not help the changes in the metadata and not the raw file. I tried to convert a TIF file after making the setting of the exhibition and then to a DNG, it enabled me to then save it as a DNG that X-Rite software then allowed me to create a profile without errors. However, this new profile was not visible in the menu of the camera Calibration.  The reason for this is that in the file real .dcp, instead of having the type of specified device, TIF.

  Second: The type of embedded camera (Canon 5 d, Nikon D90, etc.) in the profile must match the type of camera in the metadata of the image you are trying to apply the profile for. Apparently, Lightroom/ACR, only to see profiles that correspond to images taken by the same type of device. This is logical, since my two different bodies have different profiles. If you shoot with two different bodies, you need to apply profiles separately in lightroom. You must sort the images by camera type, then apply/sync profile applicable to each camera camera separately.

  Third: I found a solution to the question of my overexposed color checker, but unless you are comfortable with the binary .dcp for editing the file with a binary editor, I suggest you only add 1/2 to a complete stop during the filming of the color checker. The problem is that red typically clips before any other color, and since your meter is an average of 18% (including the incident meter in the studio), it is possible to red clip while the Green and blue are fine.

• 14 elements Photoshop on Mac, cannot again apply Camera raw (9.7)

  I just bought the new Photoshop Elements (14) and updated after installation.

  Seems that it uses Camera raw 9.5 and I need 9.7 support for my camera.

  I downloaded AdobeCameraRaw-9, 7-CC-mul_AdobeUpdate, once looking at the download page to be used, as for PS Elements.

  When I open it has an AdobePatchInstaller.app, performing this ends in error saying (translated by me from Danish):

  Update can be done

  The update could not be used

  This fix is not for you.

  Look for updates in the product Help menu, where you will find a list of the latest updates available.

  If the problem persists, contact customer support.

  I ran the update on the Help menu, and as stated, I went to update camera raw 9.5 not supporting my camera.

  How can I install/apply camera raw 9.7 on 14 PSElements?

  Thanks in advance

  PSE15 is scheduled for early October, which can be updated to ACR9.7

  If you just buy PSE14, you can receive a free upgrade by releasing v15.

  Am I entitled to a free upgrade to the Adobe product?

• Lightroom can't change the photos of mark IV 5 d in 1DS camera profiles

  May I ask on Lightroom camera profiles? I can't change the photos of mark IV 5 d in 1DS camera profiles. When I tried to change it, the color saturation is very low, as black and white photos.

  Before I used Adobe DNG Converter & DNG Profile Editor to make my own Canon 1DS camera profiles. The effects of the 1DS the color profiles that surrounds the peoples were adorable. It was a success with 5 d mark III.

  But now, using the new camera 5 d IV. I followed the steps of old, using DNG Profile Editor to open it and then choose Canon 1DS DCP to export. The effects of saturation of color does not become as before. It turns very low over the DNG Profile Editor, when I tried to export a new dcp 1DS file in lightroom, looks still very low color saturation.

  I would ask if anyone has come across such a problem...

  I hope that someone can help and can solve my problem.

  Thank you!

  someone already answered my question. The answer is: in the DNG profile editor just add + 1 saturation (any button of saturation), it goes back to normal.

  Thank you all!

• Lightroom does not apply lens profile automatically

  Hello

  I use Lightroom CC based on MacOS.

  Unfortunately, Lightroom does not apply the profile of my SIGMA 150-600 mm F5-6. 3 DG OS HSM p014 in development mode, but shows the lens correctly in library mode. All other lenses (CANON) are applied automatically, so it seems that I have a configuration problem. Lightroom shows that the profile cannot be detected automatically and cannot be applied. In the list of lenses, I can choose the target and that the profile is applied.

  Support said that this target is not supported. I can see the attached list of the answer all lenses supported by lightroom. And guess what, the lens is in this list. Detective Conan.

  So the support team has done a worse job, and did not check the list. I described that I can choose manually, but the response above was the answer.

  Any ideas how a.) the coup support team for doing their job and b.) help me with my problem.

  Thank you

  Peter

  After selecting the right lens manually, try this:

  

  This should fix it in the future.

• Problem of calibration of WB with 1DX Mark II camera profiles

  It seems that the calibration of the WB's messy hair for the color simulation profiles 1DX Mark II manufacturer.

  For example, a + 5100 17 WB value becomes 4300-13 when the profiles using colorimetric simulation manufacturer instead of Adobe Standard.

  This should be a quick and easy solution to your software engineers, I guess?

  Thanks in advance!

  I downloaded a sample 1DX Mark II file here: Canon 1DX II Image Test digital camera digital, camera

  The ACE shot WB is 5350-21 Adobe Std and -4350 50 Std of the camera, but the World Bank is the same for both. Using the pipette WB I get 5700-19 Adobe Std and 4650-47 with correct WB (R = G = B). Clearly the 'Caméra' profiles are incorrect to WB settings should be the same as the Standard Adobe. My Canon 300 d, 600 d, and 5 d MKII all show the same WB As Shot or parameters when you use the pipette WB.

  Surrephoto wrote:

  However, after having tasted a white area or map using the pipette WB, the value is locked regardless of the profile used and will result in wrong WB if you switch between these profiles.

  I'm not sure what you mean by "value is locked." When you use the pipette WB it changes the settings of temperature and tint values. If you change the profile of the camera should not change the settings of the WB. The issue is due to different WB settings in the 'Camera' profile vs Adobe Standard profile.

  I modified the 1DX Mark II camera Standard profile using Adobe DNG Profile Editor (DPE) as below and values is now about the same (±50 Temp, tinted ±1) to the values for the parameters "As Shot" and pipette Adobe Standard WB WB. Since I don't own a Canon Mark II 1DX I suggest you report the problem here: https://feedback.photoshop.com/photoshop_family.

  Click on 'New message' and follow the instructions and select the Type of Conversation > problem. Please, include a link to this post in the report and add an answer here with a link to the new report. Thank you! If you need help let me know.

  DPE: WB calibration changed to Temp-11, Edit > WB Reset for the current Image, save new camera profile to the folder "User".

  

• Lightroom camera profiles mac folder

  Hi all

  I'm new to Mac, but I am trying to install a profile of the camera for lightroom

  (latest version).

  HD/users/username/LibraryApplicationSupport/Adobe/CameraRaw/CameraProfile.

  I managed to put the camera profile (folder) in the:

  / Applications/Adobe Lightroom folder / Adobe Lightroom.app/Contents/Resources/CameraProfiles/camera. However, this doesn't seem to work.

  the problem is, I can't find this specific folder 'user' (maybe it's just my inexperience with mac).

  I would appreciate your help with this.

  Thank you!

  John

  Hi fotojornc,

  In order to get the user's library, please follow the steps below:

  Go to Finder > click on Go > click on go to folder > Type ~ Library and click on Go.

  Then go to the location following ApplicationSupport/Adobe/CameraRaw/CameraProfile "and add the camera profiles.

  Please let us know if it helps.

  Concerning

  Sarika

• Apply a profile to host several guests to csv

  I'm really close on this one I think.  The content of my hostprofile.csv is:

  'NAME, STATE, STATUS, % CPU, % MEMORY, THE LAST TIME LEAVES STANDBY, ALARM ACTIONS, AUTODEPLOY. "MACHINEIDENTITY, CREATED BY A, FUNCTION, DL, OWNER/APPLICANT NOTIFICATION '.

  "esxdc2s01. "DOMAIN.local, Maintenance Mode, normal, 0%, 2%, never allowed," he said.

  "esxdc2s02. "DOMAIN.local, Maintenance Mode, normal, 0%, 2%, never allowed," he said.

  "esxdc2s03. "DOMAIN.local, Maintenance alert Mode, 0%, 2%, never allowed," he said.

  And my code is:

  $HostList = import-Csv Hostprofiles.csv

  SE connect-VIServer-Server VIRTUALCENTER. DOMAIN.local-"qa\a-dubutcher" of the user-password MYPASSWORD

  # Apply the profile of the host to all virtual machines in $HostList
  {foreach ($Host in $HostList)
  Apply-VMHostProfile-$($Host.NAME) of the entity-profile YKFProfile-confirm: $false
  }

  And my error message is:

  Impossible to replace host variable because it is read-only or constant.
  The C:\Users\dubutcher\Dropbox\VMware\Scripts\Blackberry_Applyprofile.ps1:6 tank
  : 8
  + foreach < < < < {($Host in $HostList)
  + CategoryInfo: WriteError: (host: String) [], SessionStateUnauth
  orizedAccessException
  + FullyQualifiedErrorId: VariableNotWritable

  Any suggestions?

  The variable "$Host" is reserved system so that you cannot overwrite it.

  Your update code:

  $HostList = import-Csv Hostprofiles.csv

  SE connect-VIServer-Server VIRTUALCENTER. DOMAIN.local-"qa\a-dubutcher" of the user-password MYPASSWORD

  # Apply the profile of the host to all virtual machines in $HostList
  {foreach ($VMHost to $HostList)
  Apply-VMHostProfile-$($VMHost.NAME) of the entity-profile YKFProfile-confirm: $false
  }

• Camera profile

  Nach letztem Update von Lightroom 6 ist bei camera profile, das profile Adobe edge & camera flat ist jetzt als Standard Favorites? Wieso?

  Adobe Photoshop Lightroom Help | Display pictures of Nikon D810 with different colors in Lightroom and Camera Raw 9.1 6.1