Appropriate driver version appears didn't not in device - 3510 all-in-one printer Manager

Similar Questions

• SCAN UTILITY DOES NOT WORK WITH MY ALL-IN-ONE PRINTER

  Dear team,

  I am facing a problem with my all-in-one printer model "HP officejet 6500 e709 a" as it comes to the Analysis ToolPak.

  In other words, I am unable to scan documents because the sistem highlights me that it requires the software HP Photosmart (... I don't really know the reason why it back doesn't work anymore)

  Unfortunately I'm not able to find the original cd supplied with the printer, so what I can do to fix the problem.

  Thank you indeed for support kindly

  Annita bottle

  [email protected]

  Hello Annita1950,

  Please try the below mentioned steps...

  1 > open the directory C:\program imaging\bin HP and then search for the following file: hpiscnapp.exe
  2 > right click on it and then select Creat shortcut on the desktop.
  3 > now get on the desktop and double-click the shortcut for hpiscnapp.exe open a window.
  4 > click new scan to start the search.

• Touchpad appearing didn't not in Device Manager

  Hello

  I have a serious problem with my laptop. The DELL touchpad does not work. I tried to update the drivers etc, but when I went into Device Manager to see if she was showing with a yellow triangle, I noticed it was completely missing. I had a technician out recently and it has replaced my motherboard and cleaned the system due to over heating problems. But now it seems that recently the touchpad was not plugged in right. I have a few weeks to rest warranty, so wonder - is this a case for another technician out to correct the error that caused the other technician? Or am I missing something? Usually in my book, once that the device is not in the Device Manager, which means usually only its not in law.

  Help quickly would be greatly appreciated.

  Thanks in advance.

  After spending a lot of time, I managed to solve the problem. I have install windows 8 x 64 and run the drivers from the Dell site. Windows 8 x 32 is not the problem.

• Webcam appearing didn't not in Device Manager under Windows 7 ultimate on laptop Samsung

  Can't see the webcam on the Device Manager tab.

  I am running windows 7 ultimate 32 bit.
  Samsung laptop. BACK to base. Core i5
  Model no.

  NP300E5X-S01IN

  Hello

  1. do you see the webcam in devices and printers?

  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: run the Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  Method 2: download and install the drivers of webcam on the manufacturer's Web site.

  http://www.Samsung.com/us/support/owners/product/NP300E5A-A05US

  Hope this information helps.

• MacBook not recognizing HP F2210 all-in-one printer

  I installed the drivers from the disc and online does not.  The computer says the driver is installed and the correct printer is selected.  When I plug the printer to the USB port on the MacBook I are not recognized.  When I hit the scan on the printer I get nothing.

  My pc works fine with the printer is not the cable, or the printer.

  The USB ports are taking readers flash without problem.

  What is OK, what version of Mac OS X?  In addition, do not connect the printer to a USB port, plug it directly into your Mac.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Format of paper detected error is not supported on 3210 all-in-One Printer

  Msg of error about the size of the paper when opening lid to print a paper copy, an office document that is on 81/2 x 11.  Error says 'paper size is not supported has detected", gushes out a blank page and cancels.  I went to default settings on a Word document that is located on my desktop and the page is set up correctly to print.  Don't know where else to see if the default values have been dirtied with.  Help, please.

  All, I went to Google again to continue my search for an answer.  Found the following of "Red Sonja":

  When I saw that so many other people on other forums of media also received this error message, I thought that it would be a solution posted by someone before too long. Assume that nobody could understand it!

  The problem has continued and became extremely irritating I went and spent a few hours on the support site of HPs and finally understood what to do, although I never found the exact error that we all received.

  Basically the fix is change the paper size setting in the Menu auto copy letter. This by pressing the copy, then #6, select letter (which is #2), and which will bring you to the Menu copy. Scroll through all the selections from 10 until you go to the bottom that is set by default again and select this option.

  I tried to make several copies, and it has worked every time now... no error message in view! However, if you try to make copies on paper other than the standard 8.5 x 11, you can select that with each individual work because by default no longer detection "auto."

  Thank you Red Sonja, whoever you are!

  RNA

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

  Hello

  HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

  Now what can I do to get this printer to work?

  

  I solved this by using Windows update, which then installed a driver in the end.

  This was not a great experience.

  Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

  Not good PR client on any level.

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• My L7680 HP Officejet all-in-one prints only about 1/4 of a photo. Help desk services is not a problem.

  My L7680 HP Officejet all-in-one prints only about 1/4 of a photo.  Help desk services is not a problem.  Is there a solution? MHow

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP L7680 - set for your version of Windows
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=2512009&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 5505 all-in-one printer not print some pdf images.

  5505 all-in-one printer not print some pdf images. the paper passes through the printer, but no image or text is printed on the paper.

  This seems to happen when the document is an 'image' and the text is not "searchable".

  Windows XP.

  no error message.

  recently started using Adobe Acrobat X (I had already been using player)

  When I made this switch, the scanner has stopped working and I uninstalled the software of the full suite and installed the basic print driver. it: HP officejet basic driver.

  After loading the base driver, scanner worked again and most impression seemed to work, all the other documents I've tried seem to work well. (If I save as word or jpg), with the exception of pdf images.

  I think I remember having a similar mistake many years ago, but the "BestModeUpdate.exe" said that it is not relevant with the latest driver.

  Hello

  Please try to print the PDF file as an image and check any changes:

  Open a PDF document and open the print dialog box.

  Click Advanced.

  Select check as Image and try printing.

  As the issue began after replace the PDF software and any similar behavior does not appear for other applications, it seems like a problem in the software Adobe Acrobat... That's why I suggest you contact Adobe support.

  Kind regards

  Shlomi

• OfficeJet J6450 All in One printer cartridge wrong cartridge, but it is not

  I have an Officejet J6450 All in One Printer.  I only use the new HP cartridges (not renovated, manual not refilling).  I installed a 74XL into the printer about a month with expiration of 02/11/2014.  It is still more than 1/2 full and very well printed yesterday.  Today, without apparent reason, the printer is saying that the ink cartridge is not supported by my printer... it is evil.  I tried a reset (3 and the # and when it does not 6 and the #) unplug him and by plugging it in.  I also removed the cartridge and tried both resets and then put it back in and still got the same error message.    I cleaned the print heads with a coffee filter and distilled water and tried the reset with unplugging and plugging back.  That didn't fix it.  Also, I deleted all of the permits from the hard drive and reinstalled the drivers and all updates (which I am automatically in any case, if the printer was already updated yesterday).  That didn't fix it.  I have tried everything and can't get this stupid to work printer.  I spent hours and hours on this.  I put in a new cartridge and it seems to work now, but I don't want to lose more than 1/2 full cartridge with no recourse.  I am a mother of 6 and the ink is very, very expensive, and what happens if this happens again?  Someone at - it ideas?  Any help would be appreciated.

  Sounds like the cartridge has failed, because its guarantee until 2014 I would contact HP telephone support. Can you please let us know how you get on?
  Thank you
  Ciara

• HP Photosmart C8180 All-in-One printer works is not on the desktop (Windows XP). Works on laptops.

  HP Photosmart C8180 All-in-One printer has suddenly stopped working on my desktop (Windows XP). When I try to print, it just says: error and blocks the QC. I finally have to cancel and delete. It's as if the driver was uninstalled itself. I tried to reinstall with the original disc. However, it will not work and only says I have a newer version already installed on my computer. There are several products from HP on my add/REMOVE list. I tried to uninstall and reinstall. I hit the uninstall, it only flashes, but never uninstalls. Due to the fact that I had a previous HP printer on my computer before buying it, I thought that it can receive signals confused. How can I delete all Hp software and start again? BTW, this printer will work on all laptops in the House, who are also Windows XP.

  Revo uninstaller allows you to uninstall the s/w

• 7780 all in one print via bluetooth from a PC Windows 7, but not the other

  • Our HP 7780 all in one printer is connected to the network via bluetooth and has an ip address of http://192.168.1.65. A Mac and a Windows 7 desktop computer can print on it. An another Windows 7 laptop USED to be able to print, but no longer can, although it can browse to it and see the ink levels.
  • After restarting, the printer status says ready and a new print job appears in the queue, but after a bit it turns into error and never print.
  • We downloaded the base driver and reinstalled. During the installation of the 7780 was on the list of discovered printers and we chose, but during the installation, we got an error message that it could not find the printer.
  • Later we downloaded and installed the patch titled that product stops printing after network installed on Windows 7 (64 bit), rebooted and still the same error.
  • Help! How to be able to print the new Windows 7 laptop!

  The problem was McAfee firewall. First I disabled it, and print worked. Then I restored the default settings of the firewall and print continued to work.

• HP OfficeJet J4580 all-in-One: OfficeJet J4580 all-in-One printer driver missing after recent update Windows 10

  After a recent update of Windows 10, my printer has stopped working. The message is that there is no driver. I tried to download the software from the website of HP and installation, but nothing changes. Copy and scan from the printer functions still work, but I can't print anything my file or on the Web.

  Hi @DMT1,

  Thank you for visiting the Forums from the HP Support! Good day.  I understand that you are looking for help with your printer that does not print after an upgrade of Windows 10. It will be a pleasure to help you here.

  You did your little comments and research before you post your question in the forums of HP. Kudos to you for this.  You're an HP customer, and we greatly appreciate you for doing business with HP. I take it as a privilege to share this platform with you.

  First, to help you better and for more clarity, please let me know if you get an error message when printing, or it just doesn't print at all?

  Some links that might consult to try to resolve the problem:

  Link 1: http://support.hp.com/us-en/product/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645099/document/c04714314

  Link 2: http://support.hp.com/us-en/product/HP-Officejet-4610-All-in-One-Printer-series/5101228/model/5101230/document/c04658195/

  Link 3: http://answers.microsoft.com/en-us/windows/forum/windows_10-hardware/hp-officejet-j4580-all-in-one-printer-does-not/4cf1c8a0-eebc-48f6-bfe5-8a537465b4eb

  I hope this helps. I would like to know how this happens. I hope that the problem is solved without

  disputes and the unit works very well. I'm always here for you help. Please reach out at any time.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution" because it will help many other people with the same problem to get it resolved without hassle.

  Take care now and have a wonderful week ahead.