Audio profiles

Similar Questions

• Cisco dual audio profile does not

  Hello. I have a Cisco TelePresence profile 52/55 double running TC6.1.1.7d7af15, which was the factory reset and after reconfiguration, this audio problems. Any audio simply no longer works (the people in the room can't hear).

  Speaker cables have been checked and look good. Configs are as below. Any suggestions in addition to the upgrade of the software? I don't think that we have a license for TC7... Thanks for any help!

  Audio
  Output
  HDMI 1
  Level: 0
  Mode: on

  Line 1
  Channels: left
  Level:-10
  Mode: on
  Type: automatic
  Save
  Equalizer
  ID: 1
  Mode: Off

  Line 2
  Channel: right
  Level:-10
  Mode: on
  Type: analog
  Save
  Equalizer
  ID: 1
  Mode: Off

  Experimental
  AudioPair Volume: 70
  EcReferenceDelay: 0

  Regarding your license TC7 - if your unit is covered by an active service contract, you should be able to retrieve a license key from the Cisco Licensing Portal: http://www.cisco.com/go/licence

  You have no active service contract, you can communicate with ATC and refer to the recent secuirty GNU Bash Advisory to get a ' free update ' to TC7.2.1 under the section "customers without service contract.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Where can I find profiles

  Where can I find the profiles as 'normal' and 'meeting', 'outside' etc.?

  If you are speaking about the audio profiles which you set earlier and thenchange as per you need, then no. They aren't supported by Moto G.In case you are on KitKat, long press the power key and you'll have threeoptions: Vibrate, silent and normal. You can adjust the volume by pressingthe volume key.In case you want to allow calls from specific contacts, you can set up MotoAssist Meeting and sleeping modes. Meeting mode of Moto Assist can bestarted by creating an event in your Calendar. Go to settings>meeting inAssist and choose [email protected] you want an event to NOT switch on meeting mode: while creating eventthere is an option show me as: available or busy. If you choose busy,meeting mode will be triggered. If you choose available then it won't be.In case you are on lollipop, press the volume key and you have threeoptions: All, priority and none.All is your normal or general mode with volume as you want. Minimum volumein this is vibrate.None is your silent mode. Nothing will ring when you put it on None.Priority is much like Moto Assist's meeting mode. You can decide who willring and at what volume. Controllable via settings>sound andnotification>interruptions. Alarms will always ring in this mode. Meetingmode works on lollipop in the same way. Only the feature to Disable orpreset Assist to NOT function for a particular event is not there, as stockCalendar is replaced by Google Calendar. And Google doesn't have thissetting.While some may think that not having previously set audio profiles isinconvenient, once you start to use it, you'll love it. It provides muchmore flexibility than the earlier system.
  

• Problems with DV Type 2 AVI audio first elements 11

  Please see the screen two screenshots below.  G - Spot says that my video is DV Type 2 AVI first elements 11 supposedly handles well.  G - Spot says that both the appropriate audio and video codecs are available on my PC Windows 7 x 64.  Home Concept DV codec is installed.  The camera was a Sony Handycam 2000 vintage and the video captured by Firewire.

  When I load the clip into 11 elements, the audio is compressed in length compared to the video.  I get about 11 seconds of high slope Ramage and then no sound for the rest of my second clip 67.  You can see the audio profile flatten after 11 seconds in the timeline view.  I notice that audio for elements is 48000 sample rate, and my video is 44100.  If there is a problem I don't know how to solve this problem in the elements.

  The video plays fine, audio and video synchronized correctly in Windows Media Player and video creator AVS.

  I am able to use AVS Video Creator to strip the audio clip, output to a .wav file and use it to replace the audio track in the elements. However, I have hundreds of clips to be changed; This method causes significant brain damage.

  Is there something I can do to get the first of 11 items to treat her correctly?

  

  Welcome to the forum.

  Unfortunately, you have posted on the Forum Pro first.

  I will pass your message on the Forum first elements, where you will get quick assistance.

  Good luck

  Hunt

  [Transferred to Premiere elements Forum]

• Cannot listen to music on Tecra Z40 - A using BT and my smartphone

  Hello

  I have connected my smartphone (Motorola Moto G 2nd generation) to my Z40 via Bluetooth.

  Unfortunately, I can't seem to use the PC to listen to music played by my smartphone, or use it as a hands-free kit. It looks like I can only Exchange files.

  Someone find a way to do this?

  It should be possible to listen to the audio from the laptop through Bluetooth.
  In my case first I had to activate the audio profile in my BT Android smartphone settings.

  Then, after pairing BT I have found the smartphone in the
  Panel of-> sound-> recording devices

  Here you set this unit as default.
  Now, right click on the device and choose Properties.
  Switch to the listen tab and check the option called listening on this unit
  In the Advanced tab, I had set the standard format of 2-channel 48 kHz CD quality

  After that I could listen to the music to the speakers for laptop

• How to enable the function keys beats again after the upgrade of the OS?

  How to activate the function of key Beats again after an upgrade of the OS which is Windows 7 Ultimate 32 bit, I use HP Mini 210-4000

  Stealth,

  The combination of bat function keys is

  FN + b

  as stated in your Quick Start Guide

  Chapter 1, Page 2

  The Guide:

  Beats Audio is an improved audio profile that offers a deep, controlled all low by maintaining a
  Crystal clear sound. Beats Audio is enabled by default.
  ▲ To enable or disable the Beats Audio, press fn + b.
  Select Start > Control Panel > hardware and sound > Beats Audio

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  If you are having problems with the audio works as it should, you may have to (re) install the drivers from the website of your laptop.

  There are actually two different models in the category of 210-4000 Mini.

  Start here to the Support and drivers

  • Select the model entry that corresponds to your laptop.
  • Go to Software and Driver Downloads
  • Select your operating system (Windows 7, 32-bit), and then click "Next".
  • Scroll down
  • The Audio driver is the first category...
  • Download the package, pay attention to where it is saved.

  Given that you just upgraded (probably from Vista?), you may need to update some other software too.  Go through the different categories and see if you need / want any of the other packages.  Most of them can be added 'above' of what you already have on the system.  If you must delete something, the program will inform you when you try to install the new version.

  • If you have control of "Admin", we can highlight the package and "double-click" to install, if not right click, select "Run as Administrator" and install.

  For Audio driver... After you update / install the driver, reboot your computer.  After that, you should have your software Beats back.  If no joy yet, go back and get the software Quick Launch bar of your website (heading Software Solutions) and install it...

  Good luck!

  ----------------------------------------------------------------------------------------------------------

  Click on the star of white Kudos on the left to give Kudos for assistance.

  Please click "accept as Solution" to say the problem is solved.

  Always include: (Computer) product number , printer - model number ,.

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• Lenovo p780 startup and shutdown sound

  Hello!

  How can I change the starting and stopping of Lenovo p780 sounds?

  In fact, I want to disable them, but generally changing, that is the question.

  Perhaps this audio file can be found somewhere on the phone and changed?

  Thank you

  Marcin

  Reach

  -setting

  -all parameters

  -audio profiles

  -general

  -power audiio reading

  see you soon

• a526 Lenovo

  Hello Sir, I have problem for my lenovo
  a526mobile BCZ I have my mobile then root
  problems created as not not acess window, call
  does not work i.e. ring call does not work
  Supported.and Gallery wallpaper also not
  support... Please help me... Explain why these
  created problem and solution he... Thank you!! If I have
  go to Configuration - audio profile - set the tone that can
  a "clean,"android.process.media ".
  order this error... why? .
  Please someone help me...

  Install knew great tool fron playstore to unroot your phone and makes hard reset... you the problem will be solved!

• Acer liquid E2 can vibrate off the coast in silent mode

  Hi guys,.

  I have problems with my acer E2 liquid. I can not turn the haptic feedback off when I'm in silent mode.

  In settings > sounds > vibrate is turned off

  also in settings > language and input > android keyboard > vibrate on keypress is off.

  When I'm in silent mode, the bottom 3 buttons (back, home, menu) keep giving haptic and unlocking the screen. When I'm not in silent mode, all the vibrations are disabled.

  It's very awkward meetings, because vibrations are some noise.

  I hope you can help me with this problem.

  Kind regards

  Karen

  Hi Karen,.

  I had the same problem. It doesn't seem to be an option in the settings of the phone, but if you download profile Scheduler App, you can turn haptic phone in all of audio profiles. I hope this helps.

  Kind regards

  Andy

• How to put a ringtone for Acer Liquid Z110?

  I can't put a ringtone for my Acer Liquid z110, how can I do?

  Hello!

  You can use apps like Ringtone Toolbox or Top Riongtone Downloader, both available for download from the Google play, customize the ringtone on the Z110.  Simply copy the ringtone file in the SD card and select one of these applications to help to set as the default ringtone.

  You can do this as often as you want and build your own ringtone collection. You can change the default ringtone in the settings > Audio profiles > General. Tap on general and select phone ringing. You should see the list of all available ringtones here and choose the one you want.

  I hope that helps!

• Problems with the new firmware 0.1.E.1.4

  Hello

  After the last update, my phone (Samsung Galaxy S3) has problems with his phone for headset support.

  I can only use the headset as headphones to phone for calls. Do not go with general audio profile.

  Sometimes I can connect audio but it disconnects quickly.

  It is a very serious problem that needs to be fixed, but I doubt that Sony will be releasing a fix quickly.

  So, how do I go back to the previous firmware? (0.1.D.0.6)

  With this firmware, I had no problem. The new firmware has a significant improvement as long as Visual but the helmet doesn't help...

  I need help. Thank you.

  OK, I just do a downgrade.

  I did a factory Reset on the helmet, downloaded "Update Services" and the program tells me that there is an update available, after the update has been completed I'm back on 0.1.D.0.6!

• A6000 no ringtone

  Hey my lenovo has 6000 team Lenovo, is having a serious problem, all my music notifaction and the message is audible but my ringer is not. That is to say when someone calls me I can't hear my phone ring. Please guys help.

  Thank you.

  PS: I already tried audio profile management, increase all my sounds to full.

  Note from the admin; phone added to the subject type

  Guys I solved the problem... atlast my computer science degree has paid contributions in accordance with my parents.

  The problem was my file audio corupted, once I changed it everything was working fine.

  Thanks to the folks who have tried to solve my problem.

• BlackBerry Smartphones blocking voice reading SMS

  I've recently updated my phone (Curve 9380) software and all messages incoming text (SMS) are read vocally and hard with a voice speaking in Italian with a British accent and mix the two languages. It's really annoying as this option, the value automatically by the software updated (this should not be so, but it's unfortunately), acts independently of any choice of audio profile. How can I remove it?

  Thanks in advance.

  Hello jonlester

  Welcome to the Forums of the BlackBerry Support

  Our BlackBerry cannot read our Messages text unless we install this 3rd party application, you need to check your applications list and uninstall or delete this particular application, if you have installed any application of party 3rd for this purpose or who reads the SMS delete this particular application to Options > device > application > locate and remove this application It will solve your problem.

  KB10040 : How to display or remove installed the application on a smart blackberry phone.

   

• Smartphones blackBerry sync a Blackberry Pearl 8100 to a Sony Ericsson earpiece/Headset Bluetooth wireless

  Via Bluetooth, I synced my Blackberry 8100 Pearl for my Sony Ericson Bloothtooth Headset HBH-DS200 stereo.  The devices are connected, but when I play music from the phone, music comes out of the Blackberry speaker rather than the helmet of the Sony Ericsson headset Sony Ericson is A2DP compatible.  Does anyone know if the Pearl 8100 is compatible A2DP and yes there at - it an option to disable this active or disabled on the phone?

  I see in the instructions for Blackberry on the 8100 that the "Source Audio" profile is A2DP but how do to this profile source?  From Sony Ericsson's Web site says the Blackbery 8300 is compatible with the headset, but did not mention the Pearl 8100. Thank you.  Miles

  The 8100 is only compatible A2DP if you improve its OS to OS 4.5.  Look into the Options > on.  If it says 4.2.x.x, then you need to upgrade.

  Here is a link that should help you:

  http://www.BlackBerryForums.com/General-8100-Series-discussion-Pearl/149548-latest-OS-8100-4-50-92-4...

• HOW TO GET TWO WAY AUDIO BETWEEN A PC AND A PROFILE C90 SYSTEM

  I'm trying to connect my PC to two audio channels and take advance of the C90 65 "profile that I have.

  I had the C90 RCA Audio Line In #2 to taking SPKR of the PC and work well to get audio to the profile via the C90 speakers.

  Audio of any of the room of the Microphones connected to the C90 to the PC?

  I have a cable connecting the Audio Line Out #2 (right) goes to the MIC on the PC socket, but it does not work.  I don't see any audio signal on the map of his local record settings?

  I did successfully on other systems using a series MXP codec that is 3000, 6000 using catch RCA of VCS.

  Also, what are the internal settings to ensure that turned off inside the C90 and the sound card on the PC?

  I'm missing something simple, I'm sure.

  Any help and or the drawing will be appreciated. ???

  You would use TC Console to manipulate the audio routing in the codec.  However, I recommend a microphone routing to an output of speaker, as Wayne mentions that this may cause problems with the audio.  I routed the microphone input to the HDMI output once, and it makes the sound being transmitted to the dark side be distorted, don't know why, but I would test fully all possible scenarios when changing channels audio.