AppSpeed Setup error: appspeed is not a server Appspeed

Similar Questions

• Setup error: (E:\ is not a valid Win32 application)

  I am trying to install Windows 7 on my Windows XP computer.  I inserted the disc of windows 7 in the DVD player and get the error E:\ is not a valid Win32 application.  How can I solve this problem?

  You are running 32 bit XP and try to install Windows 7 64-bit? If so, you must restart and boot from the DVD.

  Installation custom own steps

  Time to use:
  Or the transition from XP to 7, not supported in place upgrade paths (ex: Vista Home Pro 7)
  Move Windows to a 64-bit system from a 32-bit system or change languages
  Don't want to make a room upgrade, or if you want a fresh install / clean

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2. backup all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs installation and license/product associated to all your programs keys, because you have to manually reinstall all programs. If you have downloaded some Internet programs you can redownload them.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation do you want?" click "Custom (advanced)." Note: 32 to 64-bit requires you to restart and boot from the DVD.
    
  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Unable to Dassault catia v5 Setup error: CXINS.exe not found

  Original title: CXINS.exe not found

  My os is win7 32 bit, and I want to configure Dassault catia v5, when I click on setup, this error all?

  CXINS not raise in C:\Users\...\AppData\Local\Temp\TempDSUnload what should I do: its very important for me to install this software

  Hello

  1. are you able to install other applications?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 2: Problems installing and uninstalling programs on Windowshttp://support.microsoft.com/kb/2438651 computers

  Method 3: Clear the following temporary folder:
  \AppData\Local\Temp C:\Users\

  Also enable the option Show hidden files

  If the problem persists then I suggest you contact the software publisher.

  http://www.3ds.com/support/

  Hope this information is useful.

• Windows Server 2008 32 bit - "not enough server storage is available to process this command."

  My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

  "Not enough server storage is available to process this command."

  Free space in my drive C is 195 GB.

  Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

  Kindly guide me to solve this issue.

  Concerning
  Hitesh Parsawala

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I get an error, "CXINS.exe not found" when trying to install catia v5 Dassault.

  Original title: 123

  Unable to Dassault catia v5 Setup error: CXINS.exe not found in windows7

  Hi dinesh_922,

  Look here for the answers and troubleshooting tips.

  http://www.catiatutorialcad.com/CATIA-help/

  Depending on what version it is, my interpretation is that it is not backward compatible...

  Good luck.

• Service Pack 1 Setup error. -The server has failed

  original title: Service Pack 1 Setup error. Windows XP Home 32 bit

  The following occurred during the installation of Service Pack 1a tried to download files from the service pack 1 on the internet:

  The server did not respond.

  This happened again and again I clicked retry. The program tries to connect to http://xpSP1.microsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a

  I also followed the links he is said to take on the web page of the service pack for installation troubleshooting. I am only given a choice to restore the default settings on the automatic updates. I have not automatically updated.

  You try to update a system restore which is now Windows XP 'Or' (without service pack)?

  If so, please read the tips following long-standing MS MVP PA Bear.

  If this isn't the case, please explain what you are trying to do.

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything in the list below, in order, before connecting the machine to the internet or a local network (i.e. other computers) and before you plug in a flash, SD card, or any other external computer diskotherwise:

  1. Make sure that the Windows Firewall is enabled.
  2. Uninstall any moment invalid Norton, McAfee, etc., free version of test which was also reinstalled, run the appropriate removal tool (see below), and then install an application antivirus of your choice (for example, http://www.microsoft.com/security_essentials/default.aspxMicrosoft Security Essentials- free).
  3. Arrival to Windows Update & get the computer fully patched.
  4. Install Windows Defender [Editor's Note: obsolete; do not install] or another anti-spyware application that integrates a real-time protection.

  TIP: Use another and negative computer to download programs for, for example, SP2 or SP3 installation, the installer for your new anti-virus application and or other removal tools cited below. Transfer these files to CD or DVD (not a flash drive) and then transfer the files of the CD or DVD on the desktop of the computer you are using.

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  TIP: After getting the computer fully patched, download/install KB971029 manually before connecting any external drive to your computer: http://support.microsoft.com/kb/971029 [1]

  VERY IMPORTANT! => Any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You need TO uninstall the trial for free AND download/run the appropriate removal BEFORE tool to install updates, the Windows Service Packs, or updates of IE AND BEFORE installing your new antivirus application (for example, Microsoft Security Essentials - free).

  Norton Removal Tool
  FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  =========================================
  [1] in force 08 Feb-11, KB971029 will be offered through Windows Update.

• After 2.2 update, error: "the Apple software update server is not found."

  Apple Software Update just updated itself to the version 2.2.  After letting the Apple Software Update 2.2 finish, I receive the error: "the Apple software update server is not found.  Check your Internet settings and try again. "The tool also pointed out"the new software is available from Apple.  I run in a typical home environment to network with a router on FIOS on Windows 10.  A virus scan was clean.

  I just uninstalled iTunes and apps and fact a relocation fee.  Once again the proposed Apple Software Update app updated to version 2.2.  After the update successfully, the error appears again: 'the Apple software update server is not found.  Check your Internet settings and try again. »

• My XP PC clock does not have to be updated; error report is: "the RPC server is unavailable."

  Hi there u clvr g33ks. Wu can help me slve ths prblm? My XP PC clock does not have to be updated; error report is: "the RPC server is unavailable"? I have tried pretty much everything hv what is allocated to me.

  Hello

  You can view these steps

  a. Click Start, type CMD. EXE and press ENTER.
  b. run the following commands one by one. (Press ENTER after typing each command.)

  NET STOP W32TIME

  W32tm /Register

  NET START W32TIME

• Three computers networked fine then suddenly the error message «...» Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "

  I had a network that worked very well with three 2 computers running Windows XP Professional and Windows XP Home Edition 1. Suddenly, the network has just stopped allowing certain communications giving the above error message (I have another thread address with XP to Vista computers). The main computer with XP Pro, I'll call A, the second computer with XP Pro, I'll call B and third with XP Home will be C. All computers can share files and printers then without any changes to the system that occurred the following:

  A can access the documents and printers on B and C

  B may NOT have access to documents or printers on one, but access to documents and printers on C

  C cannot have access to the documents on one, but CAN access A printer and CAN access the documents and printers on B

  When access is denied error message is displayed:
  "\\A\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "(\\A\ being the computer that I am trying to access)

  As I said access from all computers on this network was working fine a week ago and there has been absolutely no changes made to the network. I checked the following

  1. workgroup name on all computers are the same
  2. file and printer sharing are enabled for all computers.
  3. all computers may been from each computers just denied in some cases.

  The firewall that runs on all three machines is AVG and there were no changes to the one last week, but I checked that sharing is allowed.

  I even tried to run the Configuration Wizard from the network on all computers to see if it works, but the same exact problems occur after doing this.

  I met this problem now THREE times. I can't believe that I'm the only one who has this problem and I can't believe that there isn't a solution for it. None of the Microsoft documentation has even a hint of a solution for this specific problem.

  I need a solution that closes completely the network at my church, and they cannot afford to buy printers and others for each of their computers.

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on A computer.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• during startup, I get an error message. Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  during startup, I get an error message.  Your SQL server installation is either corrupt or has been tampered with (could not open SQLEVN70. RLL) how to solve this problem?

  Thank you for visiting the Microsoft answers community.

  The question you have posted is associated with MS SQL server and would be better suited to the Group Discussion TechNet Microsoft. Please visit this link to find a community that will provide the support you want.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network access error: not enough server storage is available to process this command

  Hello
  I can't access the other computers on my network neighborhood.
  If I try to use \\computer\d$ running, I get "not enough server storage is available to process this command."

  I look in the case of newspapers and I have an error: "{the browser service has failed retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{97851F92-8FAC-4FB2-A6C9-CAB1B0FE6593}." The secondary Explorer stops. »

  I enjoyed all the ideas. I hope I don't have to reinstall the system (Windows Vista Business 32 bit)

  Dan

  I'm glad that you got this sorting. You were one of the rare cases where there was not enough space on a hard drive. Generally, the "not enough space" is misleading. In all cases, it is good to know things work now. Thank you for taking the time to let us know. MS - MVP - Elephant Boy computers - don't panic!

• Error when you try to connect to a shared network drive by car on the portable XP from VISTA desktop: "not enough server storage is available to process this command."

  Hello
  I was able to connect ok in a shared folder on my laptop VISTA from my XP desktop computer.
  but when I try the other way around (to connect to a shared drive on my desktop XP FROM my VISTA laptop), I get the following error message:

  "The mapped network drive could not be created because the following error occurred: not enough server storage is available to process this command."

  Desktop is HP Pavilion a1410n
  Windows XP SP3 Home Professional 3 GB RAM
  Laptop is HP dv5z
  Windows Vista Edition Home Premium SP2 4 GB RAM

  I would like suggestions.
  Thank you very much.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Steve,

  Thanks a lot for the link to this article.
  It was most helpful.

  I also found this forum useful post:
  http://www.techsupportforum.com/Networking-Forum/networking-support/114373-cant-map-new-network-drive.html

  In particular, he said to check the event log of the computer that you are trying to connect to (the remote computer) to search for an event ID 2011, which would be entered in the time you finally tried to connect and does not.
  I did alt-click on the icon MY COMPUTER (from the remote computer) and the menu HANDLE, click the EVENT VIEWER folder (in the left pane), and then the SYSTEM folder under that.
  On the right pane, I found an ad for the event ID 2011 at the time wherever I finally tried to connect.

  To test this, I went to the VISTA laptop and tried to connect the computer to Office XP again, which gives a different error message on the VISTA laptop.
  When I went back on the XP desktop I tried to connect to and looked again to the event log, of course ANOTHER event ID 2011 has been registered with the new time of my additional attempt to connect.

  He confirmed that it was likely that the IRPStackSize was the problem, as your proposed article.

  Then I printed article how DO TO SAVE AND RESTORE the REGISTER to: http://support.microsoft.com/kb/322756/
  then backed up the registry (both by running a restore system to register and by exporting from the top level of the regedit).

  I then went in regedit on the desktop in XP for the
  HKEY_LOCAL_MACHINE\SYSTEM\CURRENTCONTROLSET\SERVICES\LANMANSERVER\Parameters file described in your article.
  There was NOT an entry for IRPStackSize in the right pane, so I followed the instructions in the add - it and change it to decimal 15.
  I rebooted and tried to connect but still got the same error.
  The article said that the default value is 15, so I assumed that adding input IRPStackSize to 15 has not changed anything.

  So I went into regedit and changed the value of IRPStackSize of 15 to 18, restarted and it solved the problem.

  I found that the following articles is also useful in the resolution of this problem (aside from the one you gave):

  http://support.Microsoft.com/kb/285089

  http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r0803/10r03/10r03.asp

  I typed this all this while this might help others who may encounter this same
  Error "not enough server storage is available to process this command" when you try to
  Map a network drive (or just try to connect) to a XP computer from another computer.

  Thanks much for the lead.

• Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

  Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

  The entire message starts like:

  \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

  are not allowed to use this network resource.  Contact the

  Administrator of this server to find out if you have the permission to access

  "not enough server storage is available to process this command" tries to open the network when the folder shared.

  I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
  Most Microsoft Valuable Professional

• Cannot use the set option in WMP, error: Media is not available and cannot access the server.

  Original title: W7 error play "Media is not available.

  On W7 Ultimate, I'm having a problem in the use of "play to" media action to my Sony TV. The tv is visible as a device and it is the same for the laptop to the TV. On laptop I get the error: "themedia is not available." Similarly, when I try to access the laptop to TV, I get error "can not access the server. any solution?

  What exact model Sony TV? You may need to install additional software
  See the content if you want to browse the content on the computer from the computer
  the TV. as to play to, see
  http://blogs.msdn.com/b/E7/archive/2009/05/12/media-streaming-with-Windows-7.aspx
  for beginners.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Windows Media Center Setup error: setup parameters for your region could not be determined.

  original title: MEDIA CENTER SETUP ERROR: Configuration settings for your region could not be determined

  windows vista operating

  Media Center worked then xbox 360 could no longer find videos.  I can not run the Setup program for media center because of this message:

  The configuration settings for your region could not be determined.  Restart your computer to solve.

  Things I've done:

  restarted computer several times

  run system restore

  disabled the norton 360 firewall settings

  has ran norton pc tune up

  still can't media center to work Please HELP

  Thank you

  Hello

  The problem may occur if the Windows Media Center components are not registered correctly.

  I suggest to try the following steps to solve the problem.

  The registry Windows Media Center components

  =========================

  1. click on start-> all programs-> Accessories, right-click command prompt and click Run as administrator.

  2 type the following commands, press ENTER after each line.

  REGSVR32 ATL. DLL

  CD C:\WINDOWS\EHOME

  EHSCHED /UNREGSERVER

  EHSCHED/SERVICE

  EHRECVR /UNREGSERVER

  EHRECVR/SERVICE

  EHREC. /UNREGSERVER EXE

  EHREC. EXE/REGSERVER

  EHMSAS. /UNREGSERVER EXE

  EHMSAS. EXE/REGSERVER

  We can open Windows Media Center now?

  It will be useful.