Aproove and deploy to production error

Similar Questions

• Attempt to run CS6 first pro: Configuration error, please uninstall and reinstall the product, error: 1

  So I installed CS6 on my Z210 Windows 7 workstation. But when I go to open half of the programs, in particular first Pro I get this message...

  Configuration error

  Please uninstall and reinstall the product.

  If this problem persists, contact Adobe technical support for assistance, and
  mention the error code displayed at the bottom of this screen.

  Error: 1

  http://www.Adobe.com/support/

  I could really use some help here. What really gets me, is apparently the Adobe customer service does not all calls. Are you kidding me?
  Any help would be greatly appreciated.
  I found a similar situation here on this forum, but I still have questions:
   
  http://www.techyv.com/questions/Adobe-Photoshop-CS6-error-code-1

  Hello

  Method 1:

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:

  If the problem persists, you can start the computer in a clean boot state, and then try to install the program.

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and keep us informed if you need help.

• I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard

  Update product key

  I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product key

  You must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.

  Read your manual, on the recovery of the system and try the options there.

  If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.

• Lightroom won't open with "Configuration error. Please uninstall and reinstall this product. Error: 16 "

  On a Mac running OS x 10.11 and final version of Lightroom CC from today.

  Before updating to lightroom, everything was fine. After lightroom update at startup, I get:

  Configuration error

  Please uninstall and reinstall the product.

  If this problem persists, please contact Adobe technical support help and mention the error code displayed at the bottom of this screen.

  Error: 16

  http://www.Adobe.com/support/

  [OK]

  So I uninstalled Lightroom desktop CC application. He asked me if I wanted to remove preferences, and I said yes.

  I have re-installed Lightroom and exhibit the same problem.

  Research on here, I found a reference to make sure that/Library/Adobe and ~/Library/Adobe are writable. I think that it was a typo: this file does not exist, but/Library/Application Support / Adobe and ~/Library/Application Support/Adobe exist and are writable.

  Any ideas?

  Thank you

  Andrew

  Hi AndyKirby,

  • Open a Terminal.
  • Copy and paste this command: sudo chmod-r 777 library/Application\ Support / Adobe
  • Press enter and give your password if requested.
  • This should fix the permissions at the origin of this error.
  • Let us know how it worked and mark the correct answer if it did.

  Kind regards

  Tanuj

• CS5 error "Setup error: Please uninstall and reinstall the product.» Error: 6 "

  When you try to install CS5, it is said

  "Configuration error: .

  Please uninstall and reinstall the product.

  Error: 6 "

  
  

  but I can not find Photoshop programs to uninstall. Please, can anyone help? Thank you.

  
  

  I have 10-64 bit Windows.

  Hi,

  Follow please: Configuration error. CC, CS

  Hope that helps!

  Kind regards

  Sheena

• Saying: uninstall and reinstall the product. Error code 16.

  Try reinstalling the illustrator of my hard drive on my mac after losing it. However when I try to open the program it says "uninstall and reinstall the product, 16 error" Please help.

  Phoebe, please see the link below.

  • Confi configuration error. CC, CS

  Let us know if that helps.

  Atul_Saini

• "Configuration error please uninstall and reinstall the product.

  I had CS5.1 installed for a few years now, I tried to run Photoshop and I had 'Configuration Error Please uninstall and reinstall the product', as well as tips contact the Adobe Support if the problem recurs. Contact the Support from Adobe is a bit like Super Bowl tickets I decided to not not start here.

  Anyone know the cause of this? There is something much less time than the uninstalling and reinstalling that can fix? My computer broke down several times recently, I'm Mac OS 10.6.8 and it seems to be a feat Flash or Java, Firefox is sensitive to what I fixed with NoScript and a Flash Disabler that can be linked, I am not sure. Photoshop is not running during one of the accidents.

  I do not have a backup of my Applications folder that still works fine (on another machine), a restore would fix this?

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall

• Deployment on IntegratedWebLogic error

  Arguments of memory in JAVA: - Xms256m-Xmx512m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m
  .
  Start mode of WLS = development
  .
  CLASSPATH=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\ext\jdbc\oracle\11g\ojdbc6dms.jar; C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.3.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/Ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/Ant-contrib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
  .
  Path = C:\Oracle\MIDDLE~1\patch_wls1033\profiles\default\native; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\Bin; C:\Oracle\MIDDLE~1\JDK160~1\jre\bin; C:\Oracle\MIDDLE~1\JDK160~1\Bin; C:\oraclexe\app\oracle\product\10.2.0\server\bin; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Microsoft Application Virtualization Client; C:\Program Files\Java\jdk1.5.0_08\bin; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
  .
  ***************************************************
  * To start WebLogic Server, use a username and *.
  * password assigned to an administrator-level user. For *.
  * server administration, using the WebLogic Server *.
  * the http://hostname:port\console console *.
  ***************************************************
  from weblogic with the Java version:
  Java version "1.6.0_18.
  Java (TM) SE Runtime Environment (build 1.6.0_18 - b07)
  Java Client VM (build 16, 0 - b13, mixed mode)
  WLS starting with line:
  C:\Oracle\MIDDLE~1\JDK160~1\bin\java-client-Xms256m-Xmx512m - XX : CompileThreshold = 8000 - XX : PermSize = 128m - XX : MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy-Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks-Dweblogic.nodemanager.ServiceEnabled=true - Xverify : aucun-da-Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3-Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Ddomain.home=C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\ SYSTÈME de ~ 1.60\DEFAUL ~ 1-Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1- Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.domain.config.dir=C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1-Doracle.server.config.dir=C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.security.jps.config=C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\fmwconfig\jps-config.xml-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Digf.arisidbeans.carmlloc= C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home= C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\config\FMWCON~1\arisidprovider-Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=C:\Users\PRAVEE~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.60\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\ patch_wls1033\profiles\default\sysext_manifest_classpath ; C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server
  < 9 December 2010 11:29:15 IST > < Info > < WebLogicServer > < BEA-000377 > < ہ WebLogic Server Java hotspot Client VM 16.0 - b13 Sun Microsystems Inc. Version >
  < 9 December 2010 11:29:16 IST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.3.0 Monday 9 April 00:05:28 PDT 2010 1321401 >
  < 9 December 2010 11:29:17 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 9 December 2010 11:29:17 IST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >
  < 9 December 2010 11:29:17 IST > < opinion > < LoggingService > < BEA-320400 > < C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 9 December 2010 11:29:17 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00038. Log messages will continue to be logged in C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >
  < 9 December 2010 11:29:17 IST > < opinion > < Log Management > < BEA-170019 > < C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >
  < 9 December 2010 11:29:22 IST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >
  < 9 December 2010 11:29:33 IST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >
  < 9 December 2010 11:29:33 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 9 December 2010 11:29:43 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the application NPDemp is not versioned. >
  < 9 December 2010 11:29:59 IST > < opinion > < LoggingService > < BEA-320400 > < C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >
  < 9 December 2010 11:29:59 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00036. Log messages will continue to be logged in C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >
  < 9 December 2010 11:29:59 IST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 9 December 2010 11:30 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 9 December 2010 11:30 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 9 December 2010 11:30 IST > < WARNING > < Server > < BEA-002611 > < Hostname "zslw461.zsl.local", corresponds to multiple IP addresses: 172.16.22.27, fe80:0:0:0:380 has: 31fd:e458:56ef 11% >
  < 9 December 2010 11:30 IST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 9 December 2010 11:30 IST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 9 December 2010 11:30 IST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:5efe:ac10:161 b: 7101 for iiop, t3, ldap, snmp, http protocols. >
  < 9 December 2010 11:30 IST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.16.22.27:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 9 December 2010 11:30 IST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" now listening on fe80:0:0:0:380 has: 31fd:e458:56ef:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 9 December 2010 11:30 IST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:0:100:7f:fffe:7101 for iiop, t3, ldap, snmp, http protocols. >
  < 9 December 2010 11:30 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >
  < 9 December 2010 11:30:01 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 9 December 2010 11:30:01 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  IntegratedWebLogicServer start time: ms 49563.
  IntegratedWebLogicServer has begun.
  [Running application on Server Instance IntegratedWebLogicServer sanswa...]
  [11: 30:02]-deployment began. ----
  [11: 30:02] the target platform's (Weblogic 10.3).
  [11: 30:03] recovery of the existing application information
  [11: 30:04] analysis of the dependence running...
  [11: 30:05] deployment of 3 profiles...
  [11: 30:05] wrote on the Web for C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\sanswa\ViewControllerWebApp.war application Module
  [11: 30:06] wrote on the Web for C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\sanswa\ModelWebApp.war application Module
  [11: 30:06] wrote the Module Enterprise Application to C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\sanswa
  [11: 30:06] Application deployment...
  < 9 December 2010 11:30:07 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the sanswa application is not versioned. >
  < 9 December 2010 11:30:08 IST > < error > < HTTP > < BEA-101371 > < there was a failure during the processing of annotations for application C:\Users\praveenkumarn\AppData\Roaming\JDeveloper\system11.1.1.3.37.56.60\o.j2ee\drs\sanswa\ModelWebApp.war. Please make sure that annotations are valid. The error is org.apache.myfaces.trinidad.webapp.ResourceServlet >
  < 9 December 2010 11:30:08 IST > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1291874406967 'for task ' 0'. Error is: "weblogic.application.ModuleException: could not load the webapp: ' sanswa-model-context-root" "
  weblogic.application.ModuleException: cannot load the webapp: "sanswa-model-context-root".
  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:404)
  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:507)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
  Truncated. check the log file full stacktrace
  >
  < 9 December 2010 11:30:08 IST > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy task for application 'sanswa' >.
  < 9 December 2010 11:30:08 IST > < WARNING > < hats > < BEA-149078 > < message 149004 track battery
  weblogic.application.ModuleException: cannot load the webapp: "sanswa-model-context-root".
  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:404)
  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:507)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
  Truncated. check the log file full stacktrace
  
  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet
  at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:280)
  at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:253)
  at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:56)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
  Truncated. check the log file full stacktrace
  >
  [11: 30:09] # incomplete deployment. ####
  [11: 30:09] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  # Cannot run application sanswa due to the deployment on IntegratedWebLogicServer error.
  [Application sanswa interrupted and cancelled Server Instance IntegratedWebLogicServer]
  
  
  Please solve this problem...

  Hello

  It does not find

  Caused by: java.lang.ClassNotFoundException: org.apache.myfaces.trinidad.webapp.ResourceServlet

  Make sure that the libraries of Trinidad are part of your deployment of the application

  Frank

• I wanted to upgrade to iOS 9 so I do it, and he beat by error 53

  Hello

  my name is s. mohsen and I'm from the Iran.

  Unfortunately, apple doesn't have any support in my country, but we love Apple products and use them.

  A few months ago, I bought an iPhone from a guy that I him no more after a few days I wanted to upgrade to iOS 9

  so I'm doing this and he beat by error 53 and I can't use it until a few days ago that I hear apple made a way to fix it.

  I was very happy and use the firmware to fix my iPhone, and then I see one apple linked ID, I can't active iPhone.

  Unfortunately I don't even know the guy that I bought and I don't know even what is the apple ID.

  I put all my money to buy and as you know products apple is very expensive in my country.

  I want to do something for me please.

  MEID: *.

  my iphone imei is: *.

  ICCID: unknown

  Sent from my MacBook Air

  < re-titled by host >

  You met the locking of activation.

  There is no way to bypass the blocking of Activation. Nothing can be done about it. Only the owner of the account that is used to lock can remove the lock.

  I'm sorry, but it is not important where you have lived in the world. There's no way beyond that.

  There is a very high probability that the phone you bought was stolen.

• VS2012 problem of configuration and deployment with scatter chart

  I've recently updated one of my programs of VS2008 to VS2012.  I also had Measurement Studio 2009 and upgraded to 2013.  Since Microsoft dropped its installation and deployment in VS2012, I'm looking to use Flexera Express to create an installer.  My app contains a form that contains a scatterplot graph control that must be deployed on both Win7 and XP computers.  I tried to force the compilation to .NET framework 4.5, but that only supports XP.  I demoted the .NET framework down to 3.5.  I noticed that I had to change the references OR whenever I changed the .NET framework.  I only had references to the NationalInstruments.UI, NationalInstruments.UI.WindowsForms and NationalInstruments.Common.  When I build the installation it requires me to explicitly declare the redistributable packages.  So I chose the package OR Measurement Studio Windows Forms Support and automatically selects the load at the time of Design and common User Interface Support (dependencies I guess).  But after I create this version of installation and install it on a system, I get the following message when you attempt to initialize the scatter chart control:

  Could not load file or assembly 'NationalInstruments.UI, Version 8.9.35.246, culture = neutral, PublicKeyToken = 18cbae0f9955702a' or one of its dependencies.  The system cannot find the specified file.

  Y at - it a redistributable package I'm missing?  I tried to add the base components for the execution of Measurement Studio, but get the same error.

  I tried to use Wix, but ran out of patience, trying to figure out this one.  Any help is greatly appreciated.

  In general, when controls utilities deploying Measurement Studio you refer to this documentation for the required dependencies for the merge modules:

  http://digital.NI.com/public.nsf/allkb/6677098983C36F9086256CFE007F457A?OpenDocument

• My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  Your help would be greatly appreciated

  Thank you

  original title: network

  Hello GerryBenjamin,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• The problems of alignment of the HP all-in-one print cartridge and color copier product families

  Click here for a detailed description of the following steps to solve the problems of alignment of print HP all-in-one cartridge and color copier product families.

  Step 1: review the alignment page paper was printed on
  Second step: the alignment page prints correctly
  Third step: perform a print cartridge cleaning procedure
  Step 4: try to align the page again
  1 automatic alignment of cartridges
  2 models with the semi-automatic print cartridge alignment
  3 "errors of alignment page not detected."
  4 additional information
  a. examples of alignment pages
  (b) without going through the print cartridge alignment

  Click here for assistance based on the cartridge system is using your printer.

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue screen: Plug and Play detected an error, probably due to a bad driver?

  Get a Blue Screen of Death: Plug and Play detected an error, probably due to a bad driver?

  I'm running on Windows Vista Home Basic. I don't know what happened, but this morning when I turned on my laptop Dell Inspiron 1420, the blue screen of death appeared saying that "Plug-and-Play detected an error, probably due to a faulty driver. She also asked me to 'Disable the BIOS memory options such as caching or shadowing the' but I don't know how to do this, because it does not appear on my BIOS settings. In addition, the message suggested that I go on safe mode, but whenever I try to go on Safe Mode, the Blue Screen of Death keeps re-appearance, so I can not go on Safe Mode or the other. And one other weird thing is that when I press F8 (press the key to early startup options) I get to select an operating system to start: Microsoft Windows XP Embedded which is weird, because as I said, my OS is Windows Vista and I don't have any other OS installed in my laptop. How can I solve this problem?

  Hi,                                                      Part 1 of 3
  (There is a 4 part added)

  These methods as well as those in the next 2 posts to troubleshoot BlueScreens. You
  can also post information that you store in a message in these forums.

  You can solve this a bit on yours with these little free programs.

  1. use BlueScreenView read minidumps and note the BCCode or stop codes, the Cause and
  the time.

  2. run MyEventViewer and search the entries at the time or a second (or) more before the BCCode
  or stop the BlueScreenView Codes.

  3. look for the code on FaultWire - ago usually excellent solutions.

  0x00000000 to 0x00000003F
  http://www.faultwire.com/solutions_index/fatal_error-1.html#IssueList

  0 x 00000040 to 0x0000007F
  http://www.faultwire.com/solutions_index/fatal_error-2.html#IssueList

  0 x to 0x000000BF 00000080
  http://www.faultwire.com/solutions_index/fatal_error-3.html#IssueList

  0x000000C0 to 0x000000FF

  0x00000100 or higher
  http://www.faultwire.com/solutions_index/fatal_error-5.html#IssueList

  4. position the BCCode or stop Codes, settings, the Cause and related information in a message
  detailed in this forum for assistance.

  ---------------------------------------------------------------------------

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and
  Displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP)

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  =============================================

  Here is the example of the usefulness of BlueScreenView - it is small and automatic so very easy to use.
  With time MyEventViewer TRICK is very simple to check when the BSOD.

  Partial screenshot of BlueScreenView (first 1/2 page)

  

  ============================================
  
  Partial Screen Shot of BlueScreenView (second 1/2 page)

  

  =======================================================

  Double-click the line to dump high component file or file - properties with it highlighted.

  

  =======================================================

  Double click on the bottom panel line of file name or file - properties with it highlighted.

  

  Right-click on a line - report HTML Selected Items.

  List of crash - created using BlueScreenView

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Number of processors	Major version	Minor version
  041110-22218 - 01.dmp	2010-04-11 22:42:11	NTFS_FILE_SYSTEM	0 x 00000024	00000000' 001904fb	fffff880'065a7bd8	fffff880'065 has 7430	fffff800'02c7c0c4	NTFS.sys	NTFS.sys + 213d8	NT file system driver	Microsoft® Windows® operating system	Microsoft Corporation	6.0.6000.16386 (vista_rtm.061101 - 2205)	x 64		2	15	7600

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.